TERACOM-MIB :: s42MAXx10Int

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TERACOM-MIB › s42MAXx10Int

s42MAXx10Int

Module: TERACOM-MIB

OID (symbolic): TERACOM-MIB::s42MAXx10Int

OID (numeric): 1.3.6.1.4.1.38783.1.2.2.1.4.3.1

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: s42 maximum value x10 in Integer format

What is s42MAXx10Int?

This read-write Integer32 sets the high alarm threshold for sensor 4's channel 2 reading, expressed as the measured value times 10 (so 235 means 23.5 units); the device raises an alarm/trap when the live s42x10Int reading exceeds this value.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.38783.1.2.2.1.4.3.1
snmpwalk -v2c -c public <target> TERACOM-MIB::s42MAXx10Int

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.38783.1.2.2.1.4.3.1.1
snmpget -v2c -c public <target> TERACOM-MIB::s42MAXx10Int.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.38783.1.2.2.1.4.3.1.1 i <value>

Start monitoring Teracom environmental monitoring units with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TERACOM-MIB::s42MAXx10Int OID value, configure state conditions and alerts, and monitor any Teracom environmental monitoring units from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.38783teracomTERACOM-MIB
1.3.6.1.4.1.38783.1tcw240bTERACOM-MIB
1.3.6.1.4.1.38783.1.2setupTERACOM-MIB
1.3.6.1.4.1.38783.1.2.2ioTERACOM-MIB
1.3.6.1.4.1.38783.1.2.2.1sensorsSetupTERACOM-MIB
1.3.6.1.4.1.38783.1.2.2.1.4sensor4setupTERACOM-MIB
1.3.6.1.4.1.38783.1.2.2.1.4.3sensor42setupTERACOM-MIB
1.3.6.1.4.1.38783.1.2.2.1.4.3.1s42MAXx10IntTERACOM-MIB

Module

This MIB depends on