TELDAT-TRAP-WWAN-MIB

All MIBs › TELDAT-TRAP-WWAN-MIB

Organization: Teldat, S.A.

Last Updated: 2014-01-20

Category: Teldat Router Management, Teldat Trap Notifications, Wireless and Cellular Networking

Description: Defines Teldat router WWAN (cellular wide-area network) event trap notifications.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TELDAT-TRAP-WWAN-MIB?

TELDAT-TRAP-WWAN-MIB is a vendor MIB from Teldat covering event notifications for the WWAN (cellular wide-area network, e.g., 3G/4G) subsystem on Teldat routers. It exposes trap/notification objects tied to per-WWAN-interface state, describing information strings, error strings, operational state, cellular operator, location area code, cell ID, and radio technology for each WWAN interface. This is a fault/event monitoring module focused on cellular WAN connectivity: it alerts operators to WWAN interface state changes, errors, or operator/cell changes that could indicate a lost cellular signal, SIM/carrier issue, or roaming event affecting a router's backup or primary WAN link. The module is described as managing notifications generated by the router's own WWAN event subsystem, without an explicit external MIB dependency beyond standard SNMP notification conventions. It is typically deployed on Teldat routers used for branch/retail sites relying on cellular WAN links for primary or failover connectivity. Engineers can download the TELDAT-TRAP-WWAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-TRAP-WWAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Teldat router with WWAN/cellular interface

Monitoring Examples

A network management system would watch traps under wwanNotifications/wwanEventsGroup carrying objects like wwan3-state, wwan4-operator, wwan5-location-area-code, wwan5-cell-id, and wwan6-technology to detect when a WWAN interface changes state, switches cellular operator, or reports a new cell/location area, and would inspect wwan2-error-string for the reported fault text when a WWAN link fails. A trap showing wwan3-state transitioning to down alongside an error string would indicate a lost cellular connection needing investigation, such as a SIM or signal issue. These objects are drawn directly from the sample objects provided for this MIB.

What Can Be Monitored

WWAN interface state
WWAN error messages
cellular operator
location area code / cell ID
radio access technology
WWAN interface name

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

From TELDAT-MIB

telEventTraps

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wwanTrapsMIB	1.3.6.1.4.1.2007.1.4.211			This Module Information Base file is defined for managing received SNMP notifications generated by the WWAN event subsystem.
wwanEventsGroup	1.3.6.1.4.1.2007.1.4.211.1
wwanEventObjects1	1.3.6.1.4.1.2007.1.4.211.1.1			Event WWAN.1 Generic informational event.
STR wwan1_info_string	1.3.6.1.4.1.2007.1.4.211.1.1.1	DisplayString	accessible-for-notify	Parameter 'info-string' in event WWAN.1
STR wwan1_ifcname	1.3.6.1.4.1.2007.1.4.211.1.1.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event WWAN.1
wwanEventObjects2	1.3.6.1.4.1.2007.1.4.211.1.2			Event WWAN.2 Generic error report.
STR wwan2_error_string	1.3.6.1.4.1.2007.1.4.211.1.2.1	DisplayString	accessible-for-notify	Parameter 'error-string' in event WWAN.2
STR wwan2_ifcname	1.3.6.1.4.1.2007.1.4.211.1.2.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event WWAN.2
wwanEventObjects3	1.3.6.1.4.1.2007.1.4.211.1.3			Event WWAN.3 Registration state has changed.
STR wwan3_state	1.3.6.1.4.1.2007.1.4.211.1.3.1	DisplayString	accessible-for-notify	Parameter 'state' in event WWAN.3
STR wwan3_ifcname	1.3.6.1.4.1.2007.1.4.211.1.3.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event WWAN.3
wwanEventObjects4	1.3.6.1.4.1.2007.1.4.211.1.4			Event WWAN.4 The wireless wan interface now uses a different Public Land Mobile Network, (Mobile Operator) identified by the number displayed.
I32 wwan4_operator	1.3.6.1.4.1.2007.1.4.211.1.4.1	Integer32	accessible-for-notify	Parameter 'operator' in event WWAN.4
STR wwan4_ifcname	1.3.6.1.4.1.2007.1.4.211.1.4.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event WWAN.4
wwanEventObjects5	1.3.6.1.4.1.2007.1.4.211.1.5			Event WWAN.5 The wireless wan interface is connected to a different base station, identified by the Location Area Code (LAC) and the Cell Identifier code (CiD).
I32 wwan5_location_area_code	1.3.6.1.4.1.2007.1.4.211.1.5.1	Integer32	accessible-for-notify	Parameter 'location-area-code' in event WWAN.5
I32 wwan5_cell_id	1.3.6.1.4.1.2007.1.4.211.1.5.2	Integer32	accessible-for-notify	Parameter 'cell-id' in event WWAN.5
STR wwan5_ifcname	1.3.6.1.4.1.2007.1.4.211.1.5.3	DisplayString	accessible-for-notify	Parameter 'ifcname' in event WWAN.5
wwanEventObjects6	1.3.6.1.4.1.2007.1.4.211.1.6			Event WWAN.6 Notify a change of the used wireless wan technology, which implies different radio bands, coding methods and therefore different data rates.
STR wwan6_technology	1.3.6.1.4.1.2007.1.4.211.1.6.1	DisplayString	accessible-for-notify	Parameter 'technology' in event WWAN.6
STR wwan6_ifcname	1.3.6.1.4.1.2007.1.4.211.1.6.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event WWAN.6
wwanEventObjects7	1.3.6.1.4.1.2007.1.4.211.1.7			Event WWAN.7 Received Signal Strength Indication (RSSI) changed to the level displayed. This event depends of user's configuration thresholds and appears only if the used technology is GSM or GPRS.
I32 wwan7_rssi_level	1.3.6.1.4.1.2007.1.4.211.1.7.1	Integer32	accessible-for-notify	Parameter 'rssi-level' in event WWAN.7
STR wwan7_ifcname	1.3.6.1.4.1.2007.1.4.211.1.7.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event WWAN.7
wwanEventObjects8	1.3.6.1.4.1.2007.1.4.211.1.8			Event WWAN.8 Received Signal Code Power (RSCP) has changed to the level displayed or the EcNo ratio (received energy per chip divided by the power density in the band) has changed to the value displayed. This event depends of user's configuration thresholds and appears only if the used technology is UMTS, HSDPA or CDMA.
I32 wwan8_rscp_level	1.3.6.1.4.1.2007.1.4.211.1.8.1	Integer32	accessible-for-notify	Parameter 'rscp-level' in event WWAN.8
I32 wwan8_ecno_level	1.3.6.1.4.1.2007.1.4.211.1.8.2	Integer32	accessible-for-notify	Parameter 'ecno-level' in event WWAN.8
STR wwan8_ifcname	1.3.6.1.4.1.2007.1.4.211.1.8.3	DisplayString	accessible-for-notify	Parameter 'ifcname' in event WWAN.8
wwanEventObjects9	1.3.6.1.4.1.2007.1.4.211.1.9			Event WWAN.9 Active SIM is placed in the displayed socked.
STR wwan9_sim_socket	1.3.6.1.4.1.2007.1.4.211.1.9.1	DisplayString	accessible-for-notify	Parameter 'sim-socket' in event WWAN.9
STR wwan9_ifcname	1.3.6.1.4.1.2007.1.4.211.1.9.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event WWAN.9
wwanEventObjects10	1.3.6.1.4.1.2007.1.4.211.1.10			Event WWAN.10 Interface call stated changed to the state displayed
STR wwan10_call_state_string	1.3.6.1.4.1.2007.1.4.211.1.10.1	DisplayString	accessible-for-notify	Parameter 'call-state-string' in event WWAN.10
I32 wwan10_call_state_num	1.3.6.1.4.1.2007.1.4.211.1.10.2	Integer32	accessible-for-notify	Parameter 'call-state-num' in event WWAN.10
STR wwan10_ifcname	1.3.6.1.4.1.2007.1.4.211.1.10.3	DisplayString	accessible-for-notify	Parameter 'ifcname' in event WWAN.10
wwanEventObjects11	1.3.6.1.4.1.2007.1.4.211.1.11			Event WWAN.11 A successful upgrade has been done to the displayed release
STR wwan11_frmwr_release	1.3.6.1.4.1.2007.1.4.211.1.11.1	DisplayString	accessible-for-notify	Parameter 'frmwr-release' in event WWAN.11
STR wwan11_ifcname	1.3.6.1.4.1.2007.1.4.211.1.11.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event WWAN.11
wwanEventObjects12	1.3.6.1.4.1.2007.1.4.211.1.12			Event WWAN.12 Current SIM is the configured as main
STR wwan12_sim_socket	1.3.6.1.4.1.2007.1.4.211.1.12.1	DisplayString	accessible-for-notify	Parameter 'sim-socket' in event WWAN.12
STR wwan12_ifcname	1.3.6.1.4.1.2007.1.4.211.1.12.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event WWAN.12
wwanEventObjects13	1.3.6.1.4.1.2007.1.4.211.1.13			Event WWAN.13 Current SIM is the configured as backup.
STR wwan13_sim_socket	1.3.6.1.4.1.2007.1.4.211.1.13.1	DisplayString	accessible-for-notify	Parameter 'sim-socket' in event WWAN.13
STR wwan13_ifcname	1.3.6.1.4.1.2007.1.4.211.1.13.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event WWAN.13
wwanEventObjects14	1.3.6.1.4.1.2007.1.4.211.1.14			Event WWAN.14 A switching criteria is met and backup SIM is activated
STR wwan14_criteria	1.3.6.1.4.1.2007.1.4.211.1.14.1	DisplayString	accessible-for-notify	Parameter 'criteria' in event WWAN.14
STR wwan14_sim_socket	1.3.6.1.4.1.2007.1.4.211.1.14.2	DisplayString	accessible-for-notify	Parameter 'sim-socket' in event WWAN.14
STR wwan14_ifcname	1.3.6.1.4.1.2007.1.4.211.1.14.3	DisplayString	accessible-for-notify	Parameter 'ifcname' in event WWAN.14
wwanEventObjects15	1.3.6.1.4.1.2007.1.4.211.1.15			Event WWAN.15 A return criteria is met and main SIM is activated
STR wwan15_criteria	1.3.6.1.4.1.2007.1.4.211.1.15.1	DisplayString	accessible-for-notify	Parameter 'criteria' in event WWAN.15
STR wwan15_sim_socket	1.3.6.1.4.1.2007.1.4.211.1.15.2	DisplayString	accessible-for-notify	Parameter 'sim-socket' in event WWAN.15
STR wwan15_ifcname	1.3.6.1.4.1.2007.1.4.211.1.15.3	DisplayString	accessible-for-notify	Parameter 'ifcname' in event WWAN.15
wwanEventObjects16	1.3.6.1.4.1.2007.1.4.211.1.16			Event WWAN.16 A error is found and reported during SIM management
STR wwan16_error	1.3.6.1.4.1.2007.1.4.211.1.16.1	DisplayString	accessible-for-notify	Parameter 'error' in event WWAN.16
STR wwan16_ifcname	1.3.6.1.4.1.2007.1.4.211.1.16.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event WWAN.16
wwanNotifications	1.3.6.1.4.1.2007.1.4.211.2
wwanNotificationsPrefix	1.3.6.1.4.1.2007.1.4.211.2.0
NTF wwanNotification1	1.3.6.1.4.1.2007.1.4.211.2.0.1			Notification of Event WWAN.1 Message: '$1 intf $2' Parameters list: $1: wwan1-info-string $2: wwan1-ifcname Generic informational event.
NTF wwanNotification2	1.3.6.1.4.1.2007.1.4.211.2.0.2			Notification of Event WWAN.2 Message: '$1 intf $2' Parameters list: $1: wwan2-error-string $2: wwan2-ifcname Generic error report.
NTF wwanNotification3	1.3.6.1.4.1.2007.1.4.211.2.0.3			Notification of Event WWAN.3 Message: 'CHANGED Registration state to $1, on interface $2' Parameters list: $1: wwan3-state $2: wwan3-ifcname Registration state has changed.
NTF wwanNotification4	1.3.6.1.4.1.2007.1.4.211.2.0.4			Notification of Event WWAN.4 Message: 'CHANGED PLMN to $1, on interface $2' Parameters list: $1: wwan4-operator $2: wwan4-ifcname The wireless wan interface now uses a different Public Land Mobile Network, (Mobile Operator) identified by the number displayed.
NTF wwanNotification5	1.3.6.1.4.1.2007.1.4.211.2.0.5			Notification of Event WWAN.5 Message: 'CHANGE Connected cell LAC $1 WWAN ID $2, on interface $3' Parameters list: $1: wwan5-location-area-code $2: wwan5-cell-id $3: wwan5-ifcname The wireless wan interface is connected to a different base station, identified by the Location Area Code (LAC) and the Cell Identifier code (CiD).
NTF wwanNotification6	1.3.6.1.4.1.2007.1.4.211.2.0.6			Notification of Event WWAN.6 Message: 'CHANGED wireless wan technology to $1, on interface $2' Parameters list: $1: wwan6-technology $2: wwan6-ifcname Notify a change of the used wireless wan technology, which implies different radio bands, coding methods and therefore different data rates.
NTF wwanNotification7	1.3.6.1.4.1.2007.1.4.211.2.0.7			Notification of Event WWAN.7 Message: 'CHANGED GSM/GPRS Coverage, RSSI $1 dBm, on interface $2' Parameters list: $1: wwan7-rssi-level $2: wwan7-ifcname Received Signal Strength Indication (RSSI) changed to the level displayed. This event depends of user's configuration thresholds and appears only if the used technology is GSM or GPRS.
NTF wwanNotification8	1.3.6.1.4.1.2007.1.4.211.2.0.8			Notification of Event WWAN.8 Message: 'CHANGED 3GPP Coverage, RSCP to $1 dBm and EcNo to $2 dB, on interface $3' Parameters list: $1: wwan8-rscp-level $2: wwan8-ecno-level $3: wwan8-ifcname Received Signal Code Power (RSCP) has changed to the level displayed or the EcNo ratio (received energy per chip divided by the power density in the band) has changed to the value displayed. This event depends of user's configuration thresholds and appears only if the used technology is UMTS, HSDPA or CDMA.
NTF wwanNotification9	1.3.6.1.4.1.2007.1.4.211.2.0.9			Notification of Event WWAN.9 Message: 'CHANGED Used SIM. Used SIM is located in the $1 socket, on interface $2' Parameters list: $1: wwan9-sim-socket $2: wwan9-ifcname Active SIM is placed in the displayed socked.
NTF wwanNotification10	1.3.6.1.4.1.2007.1.4.211.2.0.10			Notification of Event WWAN.10 Message: 'CHANGED Call state to $1 ($2), on interface $3' Parameters list: $1: wwan10-call-state-string $2: wwan10-call-state-num $3: wwan10-ifcname Interface call stated changed to the state displayed
NTF wwanNotification11	1.3.6.1.4.1.2007.1.4.211.2.0.11			Notification of Event WWAN.11 Message: 'CHANGED wireless wan module firmware to release $1, on interface $2' Parameters list: $1: wwan11-frmwr-release $2: wwan11-ifcname A successful upgrade has been done to the displayed release
NTF wwanNotification12	1.3.6.1.4.1.2007.1.4.211.2.0.12			Notification of Event WWAN.12 Message: 'Main SIM is $1 and now is active, on interface $2' Parameters list: $1: wwan12-sim-socket $2: wwan12-ifcname Current SIM is the configured as main
NTF wwanNotification13	1.3.6.1.4.1.2007.1.4.211.2.0.13			Notification of Event WWAN.13 Message: 'Backup SIM is $1, and now is active, on interface $2' Parameters list: $1: wwan13-sim-socket $2: wwan13-ifcname Current SIM is the configured as backup.
NTF wwanNotification14	1.3.6.1.4.1.2007.1.4.211.2.0.14			Notification of Event WWAN.14 Message: 'Switching criteria $1 is met. Switching to backup SIM ($2), on interface $3' Parameters list: $1: wwan14-criteria $2: wwan14-sim-socket $3: wwan14-ifcname A switching criteria is met and backup SIM is activated
NTF wwanNotification15	1.3.6.1.4.1.2007.1.4.211.2.0.15			Notification of Event WWAN.15 Message: 'Return criteria $1 is met. Switching to main SIM ($2), on interface $3' Parameters list: $1: wwan15-criteria $2: wwan15-sim-socket $3: wwan15-ifcname A return criteria is met and main SIM is activated
NTF wwanNotification16	1.3.6.1.4.1.2007.1.4.211.2.0.16			Notification of Event WWAN.16 Message: 'SIM Management error $1, on interface $2' Parameters list: $1: wwan16-error $2: wwan16-ifcname A error is found and reported during SIM management

RFC description

Teldat Wireless WAN (WWAN) trap MIB for managing SNMP notifications from wireless wide-area network event subsystems (vendor-private).

Start monitoring Teldat router with WWAN/cellular interface (interface state/operator/cell-change event traps) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TELDAT-TRAP-WWAN-MIB

What Is TELDAT-TRAP-WWAN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description