TELTONIKA-MIB

All MIBs › TELTONIKA-MIB

Organization: TELTONIKA

Last Updated: 2013-07-24

Category: Industrial and Cellular Routers, Wireless and Cellular Networking

Description: Manages Teltonika industrial cellular router configuration, mobile connection status, I/O state, and GPS position data.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TELTONIKA-MIB?

This MIB module manages Teltonika industrial cellular routers, a family of ruggedized LTE/GSM routers used for M2M and IoT connectivity. It exposes hardware identity data (modem IMEI, model, manufacturer, revision, serial number), cellular subscriber and connection data (IMSI, SIM state, GSM registration details), static/dynamic configuration, GPS position, and digital I/O state. It is explicitly used to monitor both hardware status, such as modem presence/revision and SIM state, and connectivity/software status such as mobile network registration and I/O line states, which is central to remote fleet monitoring of cellular-connected devices. It defines its own object tree without a stated formal dependency on other MIBs, though it is often deployed alongside standard IF-MIB style interface data on the same device. It is typically deployed in industrial and vehicular/M2M settings where Teltonika routers provide cellular backhaul for remote sites, kiosks, or vehicles. Network engineers evaluating or troubleshooting this functionality can download the TELTONIKA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TELTONIKA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Teltonika industrial cellular router

Monitoring Examples

An operator would poll modemImei, modemModel, and simState to confirm a specific SIM is properly inserted and registered before troubleshooting a connectivity complaint, and would check the gsm branch for signal/registration parameters when a remote site reports intermittent connectivity. The static and io branches expose configured static routes/addressing and digital input/output pin states, letting an admin verify a connected sensor or relay's current state remotely. GPS location objects would be polled to track the physical location of a mobile-deployed router, and trap notifications alert on events like SIM or connection state changes without constant polling.

What Can Be Monitored

modem IMEI/model/revision
SIM state and IMSI
GSM registration/signal status
digital I/O state
GPS position

Imported Objects

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
NetworkAddress
OBJECT-TYPE
Opaque
enterprises

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using signal OID:

Select a Teltonika industrial cellular router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type signal into the Find box to locate it in the OID tree, then select it and click OK. It reports rUT9xx signal level. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the value drifts significantly from its normal baseline, since an unexpected change often points to a real underlying issue. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR accuracy	1.3.6.1.4.1.48690.6.3	DisplayString	read-only	RUT9xx accuracy
STR analogInput	1.3.6.1.4.1.48690.5.3	DisplayString	read-only	RUT9xx analog input
STR analogInputCalc	1.3.6.1.4.1.48690.5.6	DisplayString	read-only	RUT9xx analog input (recalculated value)
STR batchNumber	1.3.6.1.4.1.48690.1.9	DisplayString	read-only	RUT9xx router batch number
STR cellID	1.3.6.1.4.1.48690.2.21	DisplayString	read-only	RUT9xx cellid parameter
STR connectionState	1.3.6.1.4.1.48690.2.7	DisplayString	read-only	RUT9xx data session connection state
STR connectionType	1.3.6.1.4.1.48690.2.8	DisplayString	read-only	RUT9xx data session connection type
I32 connectionUptime	1.3.6.1.4.1.48690.2.17	Integer32	read-only	RUT9xx mobile connection uptime
STR datetime	1.3.6.1.4.1.48690.6.4	DisplayString	read-only	RUT9xx GPS datetime
STR digitalInput	1.3.6.1.4.1.48690.5.1	DisplayString	read-only	RUT9xx digital input
STR digitalIsolatedInput	1.3.6.1.4.1.48690.5.2	DisplayString	read-only	RUT9xx digital galvanically isolated input
STR digitalOCOutput	1.3.6.1.4.1.48690.5.4	DisplayString	read-only	RUT9xx digital OC output
STR digitalRelayOutput	1.3.6.1.4.1.48690.5.5	DisplayString	read-only	RUT9xx digital relay output
ethernet	1.3.6.1.4.1.48690.7
STR firmwareVersion	1.3.6.1.4.1.48690.2.14	DisplayString	read-only	RUT9xx firmware version
gps	1.3.6.1.4.1.48690.6
gsm	1.3.6.1.4.1.48690.2
STR hardwareRevision	1.3.6.1.4.1.48690.1.10	DisplayString	read-only	RUT9xx router hardware revision
hotspot	1.3.6.1.4.1.48690.3
hotspot1	1.3.6.1.4.1.48690.3.1
hotspot2	1.3.6.1.4.1.48690.3.2
hotspot3	1.3.6.1.4.1.48690.3.3
hotspot4	1.3.6.1.4.1.48690.3.4
STR hotSpotDownloadBandWidth1	1.3.6.1.4.1.48690.3.1.5	DisplayString	read-only	RUT9xx hot spot download band width
STR hotSpotDownloadBandWidth2	1.3.6.1.4.1.48690.3.2.5	DisplayString	read-only	RUT9xx hot spot download band width
STR hotSpotDownloadBandWidth3	1.3.6.1.4.1.48690.3.3.5	DisplayString	read-only	RUT9xx hot spot download band width
STR hotSpotDownloadBandWidth4	1.3.6.1.4.1.48690.3.4.5	DisplayString	read-only	RUT9xx hot spot download band width
STR hotSpotEnableState1	1.3.6.1.4.1.48690.3.1.3	DisplayString	read-only	RUT9xx hot spot enable status
STR hotSpotEnableState2	1.3.6.1.4.1.48690.3.2.3	DisplayString	read-only	RUT9xx hot spot enable state
STR hotSpotEnableState3	1.3.6.1.4.1.48690.3.3.3	DisplayString	read-only	RUT9xx hot spot enable state
STR hotSpotEnableState4	1.3.6.1.4.1.48690.3.4.3	DisplayString	read-only	RUT9xx hot spot enable state
STR hotSpotEndTime1	1.3.6.1.4.1.48690.3.1.16	DisplayString	read-only	RUT9xx hot spot user last connection time
STR hotSpotEndTime2	1.3.6.1.4.1.48690.3.2.16	DisplayString	read-only	RUT9xx hot spot user last connection time
STR hotSpotEndTime3	1.3.6.1.4.1.48690.3.3.16	DisplayString	read-only	RUT9xx hot spot user last connection time
STR hotSpotEndTime4	1.3.6.1.4.1.48690.3.4.16	DisplayString	read-only	RUT9xx hot spot user last connection time
STR hotSpotId1	1.3.6.1.4.1.48690.3.1.1	DisplayString	read-only	Rut9xx hot spot id
STR hotSpotId2	1.3.6.1.4.1.48690.3.2.1	DisplayString	read-only	Rut9xx hot spot id
STR hotSpotId3	1.3.6.1.4.1.48690.3.3.1	DisplayString	read-only	Rut9xx hot spot id
STR hotSpotId4	1.3.6.1.4.1.48690.3.4.1	DisplayString	read-only	Rut9xx hot spot id
STR hotSpotIP1	1.3.6.1.4.1.48690.3.1.4	DisplayString	read-only	RUT9xx hot spot ip address
STR hotSpotIP2	1.3.6.1.4.1.48690.3.2.4	DisplayString	read-only	RUT9xx hot spot ip address
STR hotSpotIP3	1.3.6.1.4.1.48690.3.3.4	DisplayString	read-only	RUT9xx hot spot ip address
STR hotSpotIP4	1.3.6.1.4.1.48690.3.4.4	DisplayString	read-only	RUT9xx hot spot ip address
STR hotSpotSsid1	1.3.6.1.4.1.48690.3.1.2	DisplayString	read-only	Rut9xx hot spot ssid
STR hotSpotSsid2	1.3.6.1.4.1.48690.3.2.2	DisplayString	read-only	Rut9xx hot spot ssid
STR hotSpotSsid3	1.3.6.1.4.1.48690.3.3.2	DisplayString	read-only	Rut9xx hot spot ssid
STR hotSpotSsid4	1.3.6.1.4.1.48690.3.4.2	DisplayString	read-only	Rut9xx hot spot ssid
STR hotSpotUploadBandWidth1	1.3.6.1.4.1.48690.3.1.6	DisplayString	read-only	RUT9xx hot spot upload band width
STR hotSpotUploadBandWidth2	1.3.6.1.4.1.48690.3.2.6	DisplayString	read-only	RUT9xx hot spot upload band width
STR hotSpotUploadBandWidth3	1.3.6.1.4.1.48690.3.3.6	DisplayString	read-only	RUT9xx hot spot upload band width
STR hotSpotUploadBandWidth4	1.3.6.1.4.1.48690.3.4.6	DisplayString	read-only	RUT9xx hot spot upload band width
STR hotSpotUsers1	1.3.6.1.4.1.48690.3.1.7	DisplayString	read-only	RUT9xx hot spot existing users
STR hotSpotUsers2	1.3.6.1.4.1.48690.3.2.7	DisplayString	read-only	RUT9xx hot spot existing users
STR hotSpotUsers3	1.3.6.1.4.1.48690.3.3.7	DisplayString	read-only	RUT9xx hot spot existing users
STR hotSpotUsers4	1.3.6.1.4.1.48690.3.4.7	DisplayString	read-only	RUT9xx hot spot existing users
STR hotSpotUsersActive1	1.3.6.1.4.1.48690.3.1.9	DisplayString	read-only	RUT9xx hot spot active users
STR hotSpotUsersActive2	1.3.6.1.4.1.48690.3.2.9	DisplayString	read-only	RUT9xx hot spot active users
STR hotSpotUsersActive3	1.3.6.1.4.1.48690.3.3.9	DisplayString	read-only	RUT9xx hot spot active users
STR hotSpotUsersActive4	1.3.6.1.4.1.48690.3.4.9	DisplayString	read-only	RUT9xx hot spot active users
STR hotSpotUsersDownload1	1.3.6.1.4.1.48690.3.1.14	DisplayString	read-only	RUT9xx hot spot user downloaded data
STR hotSpotUsersDownload2	1.3.6.1.4.1.48690.3.2.14	DisplayString	read-only	RUT9xx hot spot user downloaded data
STR hotSpotUsersDownload3	1.3.6.1.4.1.48690.3.3.14	DisplayString	read-only	RUT9xx hot spot user downloaded data
STR hotSpotUsersDownload4	1.3.6.1.4.1.48690.3.4.14	DisplayString	read-only	RUT9xx hot spot user downloaded data
STR hotSpotUsersIp1	1.3.6.1.4.1.48690.3.1.11	DisplayString	read-only	RUT9xx hot spot user ip address
STR hotSpotUsersIp2	1.3.6.1.4.1.48690.3.2.11	DisplayString	read-only	RUT9xx hot spot user ip address
STR hotSpotUsersIp3	1.3.6.1.4.1.48690.3.3.11	DisplayString	read-only	RUT9xx hot spot user ip address
STR hotSpotUsersIp4	1.3.6.1.4.1.48690.3.4.11	DisplayString	read-only	RUT9xx hot spot user ip address
STR hotSpotUsersMac1	1.3.6.1.4.1.48690.3.1.10	DisplayString	read-only	RUT9xx hot spot user mac
STR hotSpotUsersMac2	1.3.6.1.4.1.48690.3.2.10	DisplayString	read-only	RUT9xx hot spot user mac
STR hotSpotUsersMac3	1.3.6.1.4.1.48690.3.3.10	DisplayString	read-only	RUT9xx hot spot user mac
STR hotSpotUsersMac4	1.3.6.1.4.1.48690.3.4.10	DisplayString	read-only	RUT9xx hot spot user mac
STR hotSpotUsersPass1	1.3.6.1.4.1.48690.3.1.8	DisplayString	read-only	RUT9xx hot spot users passwords
STR hotSpotUsersPass2	1.3.6.1.4.1.48690.3.2.8	DisplayString	read-only	RUT9xx hot spot users passwords
STR hotSpotUsersPass3	1.3.6.1.4.1.48690.3.3.8	DisplayString	read-only	RUT9xx hot spot users passwords
STR hotSpotUsersPass4	1.3.6.1.4.1.48690.3.4.8	DisplayString	read-only	RUT9xx hot spot users passwords
STR hotSpotUsersStartTime1	1.3.6.1.4.1.48690.3.1.12	DisplayString	read-only	RUT9xx hot spot user connection to hotspot time
STR hotSpotUsersStartTime2	1.3.6.1.4.1.48690.3.2.12	DisplayString	read-only	RUT9xx hot spot user connection to hotspot time
STR hotSpotUsersStartTime3	1.3.6.1.4.1.48690.3.3.12	DisplayString	read-only	RUT9xx hot spot user connection to hotspot time
STR hotSpotUsersStartTime4	1.3.6.1.4.1.48690.3.4.12	DisplayString	read-only	RUT9xx hot spot user connection to hotspot time
STR hotSpotUsersUpload1	1.3.6.1.4.1.48690.3.1.15	DisplayString	read-only	RUT9xx hot spot user uploaded data
STR hotSpotUsersUpload2	1.3.6.1.4.1.48690.3.2.15	DisplayString	read-only	RUT9xx hot spot user uploaded data
STR hotSpotUsersUpload3	1.3.6.1.4.1.48690.3.3.15	DisplayString	read-only	RUT9xx hot spot user uploaded data
STR hotSpotUsersUpload4	1.3.6.1.4.1.48690.3.4.15	DisplayString	read-only	RUT9xx hot spot user uploaded data
STR hotSpotUsersUseTime1	1.3.6.1.4.1.48690.3.1.13	DisplayString	read-only	RUT9xx hot spot user active time
STR hotSpotUsersUseTime2	1.3.6.1.4.1.48690.3.2.13	DisplayString	read-only	RUT9xx hot spot user active time
STR hotSpotUsersUseTime3	1.3.6.1.4.1.48690.3.3.13	DisplayString	read-only	RUT9xx hot spot user active time
STR hotSpotUsersUseTime4	1.3.6.1.4.1.48690.3.4.13	DisplayString	read-only	RUT9xx hot spot user active time
STR imsi	1.3.6.1.4.1.48690.1.6	DisplayString	read-only	RUT9xx IMSI
STR latitude	1.3.6.1.4.1.48690.6.2	DisplayString	read-only	RUT9xx latitutde coordinates
STR longtitude	1.3.6.1.4.1.48690.6.1	DisplayString	read-only	RUT9xx longititude coordinates
STR mobileIP	1.3.6.1.4.1.48690.2.18	DisplayString	read-only	RUT9xx mobile connection IP
STR modemImei	1.3.6.1.4.1.48690.1.1	DisplayString	read-only	RUT9xx modem IMEI
STR modemManufacturer	1.3.6.1.4.1.48690.1.3	DisplayString	read-only	RUT9xx modem manufacturer
STR modemModel	1.3.6.1.4.1.48690.1.2	DisplayString	read-only	RUT9xx modem model
STR modemRevision	1.3.6.1.4.1.48690.1.4	DisplayString	read-only	RUT9xx modem revision
STR netState	1.3.6.1.4.1.48690.2.3	DisplayString	read-only	RUT9xx mobile network registration status
I32 numSatellites	1.3.6.1.4.1.48690.6.5	Integer32	read-only	RUT9xx number of satellites
STR operator	1.3.6.1.4.1.48690.2.5	DisplayString	read-only	RUT9xx operator currently in use
STR operatorNumber	1.3.6.1.4.1.48690.2.6	DisplayString	read-only	RUT9xx operator number (MCC+MNC)
STR pinState	1.3.6.1.4.1.48690.2.2	DisplayString	read-only	RUT9xx PIN status
STR port1	1.3.6.1.4.1.48690.7.1	DisplayString	read-only	Ethernet (WAN) port status
STR port2	1.3.6.1.4.1.48690.7.2	DisplayString	read-only	Ethernet (LAN) port 2 status
STR port3	1.3.6.1.4.1.48690.7.3	DisplayString	read-only	Ethernet (LAN) port 3 status
STR port4	1.3.6.1.4.1.48690.7.4	DisplayString	read-only	Ethernet (LAN) port 4 status
STR productCode	1.3.6.1.4.1.48690.1.8	DisplayString	read-only	RUT9xx router product code
I32 received	1.3.6.1.4.1.48690.2.20	Integer32	read-only	RUT9xx bytes received
I32 receivedToday	1.3.6.1.4.1.48690.2.10	Integer32	read-only	RUT9xx 3G connection received bytes today
I32 receivedYesterday	1.3.6.1.4.1.48690.2.12	Integer32	read-only	RUT9xx 3G connection received bytes yesterday
STR routerName	1.3.6.1.4.1.48690.1.7	DisplayString	read-only	RUT9xx router name
I32 routerUptime	1.3.6.1.4.1.48690.2.16	Integer32	read-only	RUT9xx router uptime
STR rSRP	1.3.6.1.4.1.48690.2.23	DisplayString	read-only	RUT9xx LTE rsrp level
STR rSRQ	1.3.6.1.4.1.48690.2.24	DisplayString	read-only	RUT9xx LTE rsrq level
rut9x5	1.3.6.1.4.1.48690.5
I32 sent	1.3.6.1.4.1.48690.2.19	Integer32	read-only	RUT9xx bytes sent
I32 sentToday	1.3.6.1.4.1.48690.2.11	Integer32	read-only	RUT9xx 3G connection sent bytes today
I32 sentYesterday	1.3.6.1.4.1.48690.2.13	Integer32	read-only	RUT9xx 3G connection sent bytes yesterday
STR serial	1.3.6.1.4.1.48690.1.5	DisplayString	read-only	RUT9xx serial number
I32 signalEx	1.3.6.1.4.1.48690.2.4	Integer32	read-only	RUT9xx signal level
STR simSlot	1.3.6.1.4.1.48690.2.15	DisplayString	read-only	RUT9xx sim slot in use
STR simState	1.3.6.1.4.1.48690.2.1	DisplayString	read-only	RUT9xx SIM status
STR sINR	1.3.6.1.4.1.48690.2.22	DisplayString	read-only	RUT9xx LTE sinr level
static	1.3.6.1.4.1.48690.1
teltonika	1.3.6.1.4.1.48690			The MIB module for TELTONIKA routers.
I32 temperature	1.3.6.1.4.1.48690.2.9	Integer32	read-only	RUT9xx module temperature
trap	1.3.6.1.4.1.48690.4
NTF trapAnalogInput	1.3.6.1.4.1.48690.4.7			RUT9xx Analog input trap
NTF trapAnalogInputStatus	1.3.6.1.4.1.48690.4.8			RUT9xx Analog input status
NTF trapConnectionType	1.3.6.1.4.1.48690.4.2			RUT9xx Connection type trap
NTF trapDigitalInput	1.3.6.1.4.1.48690.4.3			RUT9xx Digital input trap
NTF trapDigitalInputStatus	1.3.6.1.4.1.48690.4.4			RUT9xx Digital input status
NTF trapDigitalOCinput	1.3.6.1.4.1.48690.4.5			RUT9xx Digital OC input trap
NTF trapDigitalOCinputStatus	1.3.6.1.4.1.48690.4.6			RUT9xx Digital OC input status
NTF trapDigitalOutput	1.3.6.1.4.1.48690.4.9			RUT9xx Digital output trap
NTF trapDigitalOutputStatus	1.3.6.1.4.1.48690.4.10			RUT9xx Digital output status
NTF trapDigitalRelayOutput	1.3.6.1.4.1.48690.4.11			RUT9xx Digital relay output trap
NTF trapDigitalRelayOutputStatus	1.3.6.1.4.1.48690.4.12			RUT9xx Digital relay output status
NTF trapSignalStrength	1.3.6.1.4.1.48690.4.1			RUT9xx Signal strength trap

RFC description

Teltonika network device MIB (OID 1.3.6.1.4.1.48690) containing SNMP managed objects for configuration and status monitoring of Teltonika RUT series routers and network equipment.

Start monitoring Teltonika industrial cellular routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TELTONIKA-MIB