-- file automatically created TELDAT-TRAP-AT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY,OBJECT-TYPE,OBJECT-IDENTITY,NOTIFICATION-TYPE,Integer32,IpAddress FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC telEventTraps FROM TELDAT-MIB; atTrapsMIB MODULE-IDENTITY LAST-UPDATED "201401200930Z" ORGANIZATION "Teldat, S.A." CONTACT-INFO "Teldat, S.A. Customer Service Postal: Parque Tecnologico de Madrid Tres Cantos 28760 Madrid, SPAIN Tel.: +34 918 076 565 http://www.teldat.com" DESCRIPTION "This Module Information Base file is defined for managing received SNMP notifications generated by the AT event subsystem." REVISION "201401200930Z" DESCRIPTION "Initial implementation" ::= { telEventTraps 149 } atEventsGroup OBJECT IDENTIFIER ::= { atTrapsMIB 1 } atNotifications OBJECT IDENTIFIER ::= { atTrapsMIB 2 } atNotificationsPrefix OBJECT IDENTIFIER ::= { atNotifications 0 } atEventObjects1 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.1 Selftest completed successfully when modem is detected and initialized." ::= { atEventsGroup 1 } at1-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.1" ::= { atEventObjects1 1 } atEventObjects2 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.2 Maintenance failure. Modem not detected." ::= { atEventsGroup 2 } at2-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.2" ::= { atEventObjects2 1 } atEventObjects3 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.3 An IP packet has been received with a CRC error." ::= { atEventsGroup 3 } at3-frame-size OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'frame-size' in event AT.3" ::= { atEventObjects3 1 } at3-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.3" ::= { atEventObjects3 2 } atEventObjects4 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.4 End flag is not found on received frame." ::= { atEventsGroup 4 } at4-frame-size OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'frame-size' in event AT.4" ::= { atEventObjects4 1 } at4-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.4" ::= { atEventObjects4 2 } atEventObjects5 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.5 Incorrect packet format: last character of frame is escape character." ::= { atEventsGroup 5 } at5-frame-size OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'frame-size' in event AT.5" ::= { atEventObjects5 1 } at5-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.5" ::= { atEventObjects5 2 } atEventObjects6 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.6 A call to the indicated destination address has been initiated." ::= { atEventsGroup 6 } at6-call-address OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'call-address' in event AT.6" ::= { atEventObjects6 1 } at6-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.6" ::= { atEventObjects6 2 } atEventObjects7 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.7 The call to the indicated destination address has been completed successfully. The call is established." ::= { atEventsGroup 7 } at7-destination-address OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'destination-address' in event AT.7" ::= { atEventObjects7 1 } at7-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.7" ::= { atEventObjects7 2 } atEventObjects8 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.8 The call to the indicated destination address could not be completed successfully because there is no answer from the remote end. The call is not established." ::= { atEventsGroup 8 } at8-destination-address OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'destination-address' in event AT.8" ::= { atEventObjects8 1 } at8-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.8" ::= { atEventObjects8 2 } atEventObjects9 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.9 The call to the indicated destination address is released." ::= { atEventsGroup 9 } at9-destination-address OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'destination-address' in event AT.9" ::= { atEventObjects9 1 } at9-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.9" ::= { atEventObjects9 2 } atEventObjects10 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.10 Incoming call established successfully." ::= { atEventsGroup 10 } at10-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.10" ::= { atEventObjects10 1 } atEventObjects11 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.11 The indicated AT command is not recognized by the modem (it returns ERROR)." ::= { atEventsGroup 11 } at11-command OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'command' in event AT.11" ::= { atEventObjects11 1 } at11-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.11" ::= { atEventObjects11 2 } atEventObjects12 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.12 The modem has given an unknown answer to the indicated AT command." ::= { atEventsGroup 12 } at12-command OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'command' in event AT.12" ::= { atEventObjects12 1 } at12-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.12" ::= { atEventObjects12 2 } atEventObjects13 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.13 The modem has not answered to the indicated AT command." ::= { atEventsGroup 13 } at13-command OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'command' in event AT.13" ::= { atEventObjects13 1 } at13-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.13" ::= { atEventObjects13 2 } atEventObjects14 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.14 The modem has not answered to the indicated AT command. Initialization process is retried." ::= { atEventsGroup 14 } at14-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.14" ::= { atEventObjects14 1 } atEventObjects15 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.15 Modem autodetection on indicated interface is being tried." ::= { atEventsGroup 15 } at15-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.15" ::= { atEventObjects15 1 } atEventObjects16 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.16 Modem autodetection has been completed successfully. Initialization string for the detected modem or standard initialization string if the modem is unknown is going to be used next." ::= { atEventsGroup 16 } at16-modem-type OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'modem-type' in event AT.16" ::= { atEventObjects16 1 } at16-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.16" ::= { atEventObjects16 2 } atEventObjects17 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.17 Modem signals were lost during initialization. Modem must have switched off or must have been disconnected of serial line. Selftest is restarted from the beginning." ::= { atEventsGroup 17 } at17-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.17" ::= { atEventObjects17 1 } atEventObjects18 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.18 The modem returned an error making call because the line is busy or not connected." ::= { atEventsGroup 18 } at18-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.18" ::= { atEventObjects18 1 } atEventObjects19 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.19 The modem returned an error making call because the remote end is busy (it is already making a call)." ::= { atEventsGroup 19 } at19-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.19" ::= { atEventObjects19 1 } atEventObjects20 OBJECT-IDENTITY STATUS current DESCRIPTION "Event AT.20 Generic event. Used for ring pattern detection." ::= { atEventsGroup 20 } at20-string OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'string' in event AT.20" ::= { atEventObjects20 1 } at20-ifcname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Parameter 'ifcname' in event AT.20" ::= { atEventObjects20 2 } atNotification1 NOTIFICATION-TYPE OBJECTS { at1-ifcname } STATUS current DESCRIPTION "Notification of Event AT.1 Message: 'Modem initialized sucessfully on interface $1' Parameters list: $1: at1-ifcname Selftest completed successfully when modem is detected and initialized." ::= { atNotificationsPrefix 1 } atNotification2 NOTIFICATION-TYPE OBJECTS { at2-ifcname } STATUS current DESCRIPTION "Notification of Event AT.2 Message: 'Maintenance failure on interface $1' Parameters list: $1: at2-ifcname Maintenance failure. Modem not detected." ::= { atNotificationsPrefix 2 } atNotification3 NOTIFICATION-TYPE OBJECTS { at3-frame-size, at3-ifcname } STATUS current DESCRIPTION "Notification of Event AT.3 Message: 'Received packed with bad crc, frame size $1, on interface $2' Parameters list: $1: at3-frame-size $2: at3-ifcname An IP packet has been received with a CRC error." ::= { atNotificationsPrefix 3 } atNotification4 NOTIFICATION-TYPE OBJECTS { at4-frame-size, at4-ifcname } STATUS current DESCRIPTION "Notification of Event AT.4 Message: 'Not received end flag on frame with size $1, on interface $2' Parameters list: $1: at4-frame-size $2: at4-ifcname End flag is not found on received frame." ::= { atNotificationsPrefix 4 } atNotification5 NOTIFICATION-TYPE OBJECTS { at5-frame-size, at5-ifcname } STATUS current DESCRIPTION "Notification of Event AT.5 Message: 'Frame ended with escape character with size $1, on interface $2' Parameters list: $1: at5-frame-size $2: at5-ifcname Incorrect packet format: last character of frame is escape character." ::= { atNotificationsPrefix 5 } atNotification6 NOTIFICATION-TYPE OBJECTS { at6-call-address, at6-ifcname } STATUS current DESCRIPTION "Notification of Event AT.6 Message: 'Dial Request Call, Destination address = $1, on interface $2' Parameters list: $1: at6-call-address $2: at6-ifcname A call to the indicated destination address has been initiated." ::= { atNotificationsPrefix 6 } atNotification7 NOTIFICATION-TYPE OBJECTS { at7-destination-address, at7-ifcname } STATUS current DESCRIPTION "Notification of Event AT.7 Message: 'Out Call established to $1, on interface $2' Parameters list: $1: at7-destination-address $2: at7-ifcname The call to the indicated destination address has been completed successfully. The call is established." ::= { atNotificationsPrefix 7 } atNotification8 NOTIFICATION-TYPE OBJECTS { at8-destination-address, at8-ifcname } STATUS current DESCRIPTION "Notification of Event AT.8 Message: 'Call not established to $1, no answer, on interface $2' Parameters list: $1: at8-destination-address $2: at8-ifcname The call to the indicated destination address could not be completed successfully because there is no answer from the remote end. The call is not established." ::= { atNotificationsPrefix 8 } atNotification9 NOTIFICATION-TYPE OBJECTS { at9-destination-address, at9-ifcname } STATUS current DESCRIPTION "Notification of Event AT.9 Message: 'Out Call released to $1, on interface $2' Parameters list: $1: at9-destination-address $2: at9-ifcname The call to the indicated destination address is released." ::= { atNotificationsPrefix 9 } atNotification10 NOTIFICATION-TYPE OBJECTS { at10-ifcname } STATUS current DESCRIPTION "Notification of Event AT.10 Message: 'Input Call established on interface $1' Parameters list: $1: at10-ifcname Incoming call established successfully." ::= { atNotificationsPrefix 10 } atNotification11 NOTIFICATION-TYPE OBJECTS { at11-command, at11-ifcname } STATUS current DESCRIPTION "Notification of Event AT.11 Message: 'Error in AT command $1 interface $2' Parameters list: $1: at11-command $2: at11-ifcname The indicated AT command is not recognized by the modem (it returns ERROR)." ::= { atNotificationsPrefix 11 } atNotification12 NOTIFICATION-TYPE OBJECTS { at12-command, at12-ifcname } STATUS current DESCRIPTION "Notification of Event AT.12 Message: 'Unknown answer to AT command $1 interface $2' Parameters list: $1: at12-command $2: at12-ifcname The modem has given an unknown answer to the indicated AT command." ::= { atNotificationsPrefix 12 } atNotification13 NOTIFICATION-TYPE OBJECTS { at13-command, at13-ifcname } STATUS current DESCRIPTION "Notification of Event AT.13 Message: 'No answer to AT command $1 interface $2' Parameters list: $1: at13-command $2: at13-ifcname The modem has not answered to the indicated AT command." ::= { atNotificationsPrefix 13 } atNotification14 NOTIFICATION-TYPE OBJECTS { at14-ifcname } STATUS current DESCRIPTION "Notification of Event AT.14 Message: 'No response to AT commands. Retrying... intf $1' Parameters list: $1: at14-ifcname The modem has not answered to the indicated AT command. Initialization process is retried." ::= { atNotificationsPrefix 14 } atNotification15 NOTIFICATION-TYPE OBJECTS { at15-ifcname } STATUS current DESCRIPTION "Notification of Event AT.15 Message: 'Trying modem autodetection on intf $1' Parameters list: $1: at15-ifcname Modem autodetection on indicated interface is being tried." ::= { atNotificationsPrefix 15 } atNotification16 NOTIFICATION-TYPE OBJECTS { at16-modem-type, at16-ifcname } STATUS current DESCRIPTION "Notification of Event AT.16 Message: 'Autodetection completed. $1 modem intf $2' Parameters list: $1: at16-modem-type $2: at16-ifcname Modem autodetection has been completed successfully. Initialization string for the detected modem or standard initialization string if the modem is unknown is going to be used next." ::= { atNotificationsPrefix 16 } atNotification17 NOTIFICATION-TYPE OBJECTS { at17-ifcname } STATUS current DESCRIPTION "Notification of Event AT.17 Message: 'Modem signals lost. Modem off or disconnected intf $1' Parameters list: $1: at17-ifcname Modem signals were lost during initialization. Modem must have switched off or must have been disconnected of serial line. Selftest is restarted from the beginning." ::= { atNotificationsPrefix 17 } atNotification18 NOTIFICATION-TYPE OBJECTS { at18-ifcname } STATUS current DESCRIPTION "Notification of Event AT.18 Message: 'Error making call. Line busy (NO DIALTONE) intf $1' Parameters list: $1: at18-ifcname The modem returned an error making call because the line is busy or not connected." ::= { atNotificationsPrefix 18 } atNotification19 NOTIFICATION-TYPE OBJECTS { at19-ifcname } STATUS current DESCRIPTION "Notification of Event AT.19 Message: 'Error making call. Remote end busy (BUSY) intf $1' Parameters list: $1: at19-ifcname The modem returned an error making call because the remote end is busy (it is already making a call)." ::= { atNotificationsPrefix 19 } atNotification20 NOTIFICATION-TYPE OBJECTS { at20-string, at20-ifcname } STATUS current DESCRIPTION "Notification of Event AT.20 Message: '$1 intf $2' Parameters list: $1: at20-string $2: at20-ifcname Generic event. Used for ring pattern detection." ::= { atNotificationsPrefix 20 } END