| OID symbolic | OID numeric | Type | Access | Description |
|---|
| telProdNpMonInterfEthernet | 1.3.6.1.4.1.2007.4.1.2.2.2.6 | | | |
| telProdNpMonInterfEtherGlobalTable | 1.3.6.1.4.1.2007.4.1.2.2.2.6.1 | | not-accessible | Table of global parameters of the Ethernet interface. The table
index is the interface number, considering that, since they begin to
number itself from 1 and not from 0, the interface number will be a
unit greater than the number assigned to it in console. In addition
to the index, each entry consists of physical MAC address used
in the interface, MAC address provided by the manufacturer
(PROM address) and the version of the microcode which is running on
the processor of Ethernet communications. |
| telProdNpMonInterfEtherGlobalEntry | 1.3.6.1.4.1.2007.4.1.2.2.2.6.1.1 | | not-accessible | Each entry consists of the number of Ethernet interface (index of
the table), physical MAC address used in the interface, MAC address
provided by the manufacturer (PROM address) and the version
of the microcode which is running on the processor of Ethernet
communications. |
| INT telProdNpMonInterfEtherGloIndex | 1.3.6.1.4.1.2007.4.1.2.2.2.6.1.1.1 | INTEGER | read-only | Number of Ethernet interface of the device. It indicates the
corresponding entry of the table (it indexes it). It is determined
by its hardware configuration. Number 1 is associated to first
of them (if there is more than one), and not the 0 like in console. |
| PHY telProdNpMonInterfEtherGloPhysMAC | 1.3.6.1.4.1.2007.4.1.2.2.2.6.1.1.2 | PhysAddress | read-only | Physical MAC address used in the Ethernet interface. |
| PHY telProdNpMonInterfEtherGloLogMAC | 1.3.6.1.4.1.2007.4.1.2.2.2.6.1.1.3 | PhysAddress | read-only | PROM address: MAC address provided by the manufacturer for Ethernet
interface. |
| STR telProdNpMonInterfEtherGloCodVer | 1.3.6.1.4.1.2007.4.1.2.2.2.6.1.1.4 | DisplayString | read-only | Version of the microcode which is running on the processor
of Ethernet communications. |
| telProdNpMonInterfEtherStatTable | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2 | | not-accessible | Table of the statistics of the input and the output of the Ethernet
interfaces. The entry number is given by the interface value, and
each one consists of the information about the number of frames
received with length greater than the maximum, number of frames
received with CRC error, number of frames received with alignment
error, number of FIFO overruns, number of reception errors nondue
to excessive collisions or carrier detection, number of lost packets
because of the local buffer is full, number of times a transmission
has been postponed because of detecting activity in the line, number
of frames which have undergone a collision before being transmitted
successfully, number of frames which have undergone multiple
collisions before being transmitted successfully, total number of
collisions, number of frames whose transmission failed because they
underwent 16 or more successive collisions, number of errors by
FIFO underruns, number of times that a frame collides because
carrier detector is disabled, number of SQE test errors, number of
frames which undergo a collision when 512 bits have been transmitted
already at least, number of transmission errors that are not
delayed, excessive collisions or of carrier detection, and finally a
variable that controls the erasure of the statistics corresponding
to the interface that the index indicates. |
| telProdNpMonInterfEtherStatEntry | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1 | | not-accessible | Each entry contains the number of Ethernet interface of the device,
which will be the index with which the table is crossed, and
a set of variables which inform about the number of frames received
with length greater than the maximum, number of frames received
with CRC error, number of frames received with alignment error,
number of FIFO overruns, number of reception errors nondue to
excessive collisions or carrier detection, number of lost packets
because of the local buffer is full, number of times a transmission
has been postponed because of detecting activity in the line, number
of frames which have undergone a collision before being transmitted
successfully, number of frames which have undergone multiple
collisions before being transmitted successfully, total number of
collisions, number of frames whose transmission failed because
they underwent 16 or more successive collisions, number of errors
by FIFO underruns, number of times that a frame collides because
carrier detector is disabled, number of SQE test errors, number of
frames which undergo a collision when 512 bits have been transmitted
already at least, number of transmission errors that are not
delayed, excessive collisions or of carrier detection, and finally
a variable that controls the erasure of the statistics corresponding
to the interface that the index indicates. |
| INT telProdNpMonInterfEtherStatIndex | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.1 | INTEGER | read-only | Number of Ethernet interface of the device. It indicates the
corresponding entry of the table (it indexes it). It is determined
by its hardware configuration. Number 1 is associated to first
of them (if there is more than one), and not the 0 like in console. |
| CTR telProdNpMonInterfEtherStatInTooLong | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.2 | Counter | read-only | Number of frames received by the interface indicated by the index
whose length exceeded the maximum allowed for an Ethernet frame:
1518 bytes. |
| CTR telProdNpMonInterfEtherStatInFCSError | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.3 | Counter | read-only | Number of frames received by that interface with a CRC error. |
| CTR telProdNpMonInterfEtherStatInAlignError | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.4 | Counter | read-only | Number of frames received by that interface with an alignment
error: its length in bits is not multiple of 8. |
| CTR telProdNpMonInterfEtherStatInOvFIFO | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.5 | Counter | read-only | Number of FIFO overruns in the interface input: the Ethernet chip
of the device isn't able to store bytes in the local buffer of
packets as fast as they leave the thread. |
| CTR telProdNpMonInterfEtherStatInMACRcvErr | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.6 | Counter | read-only | Number of reception errors nondue to excessive collisions or
carrier detection. |
| CTR telProdNpMonInterfEtherStatInPackMissed | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.7 | Counter | read-only | Number of lost packets because of the local buffer is full.
This error indicates that the network has more traffic than
the one than the interface can handle. |
| CTR telProdNpMonInterfEtherStatOutDefTx | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.8 | Counter | read-only | Number of times that the interface has postponed the transmission
because the mechanism of carrier detection has detected activity in
the line. |
| CTR telProdNpMonInterfEtherStatOutSingleColl | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.9 | Counter | read-only | Number of frames which have undergone a collision in the first
attempt of transmission and have been sent successfully in
the second attempt. |
| INT telProdNpMonInterfEtherStatOutMultColl | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.10 | INTEGER | read-only | Counter which is increased when a plot undergoes a multiple
collision before being transmitted successfully. |
| INT telProdNpMonInterfEtherStatOutTotColl | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.11 | INTEGER | read-only | Counter of the total number of collisions of a frame. |
| CTR telProdNpMonInterfEtherStatOutExcColl | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.12 | Counter | read-only | Number of frames whose transmission failed because they underwent
16 or more successive collisions. This error indicates a high volume
of traffic in the network, or hardware problems in the network. |
| CTR telProdNpMonInterfEtherStatOutUndFIFO | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.13 | Counter | read-only | Number of errors by FIFO underruns: The transmission of a frame
fails because the interface is not able to retrieve frames from
the local buffer of frames with the sufficient speed to transmit
them into the network. |
| CTR telProdNpMonInterfEtherStatOutCarrSens | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.14 | Counter | read-only | Number of times that a frame collides because carrier detector is
disabled. This error indicates a problem between the interface and
its Ethernet transreceiver. |
| CTR telProdNpMonInterfEtherStatOutSQEErr | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.15 | Counter | read-only | Number of times that the interface sent a frame but detected
absence of heartbeat in the Ethernet transreceiver. It is supposed
that the transmission of the packet has been carried out
successfully since some transreceivers do not generate heartbeats. |
| CTR telProdNpMonInterfEtherStatOutLateColl | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.16 | Counter | read-only | Number of frames which have undergone a collision after to have
transmitted 512 bytes at least. This error shows that an interface
in the network did not postpone the transmission, or that
the network has too many stations. |
| CTR telProdNpMonInterfEtherStatOutMACTxErr | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.17 | Counter | read-only | Number of transmission errors that are not delayed, excessive
collisions or of carrier detection. |
| INT telProdNpMonInterfEtherStatResetStat | 1.3.6.1.4.1.2007.4.1.2.2.2.6.2.1.18 | INTEGER | read-write | Variable which indicates the result of the last erasure operation
of statistics in a get operation: its value is 2 if the operation
took place with normality, 3 if an error took place, 4 if the
command is running and 5 if an erasure operation has not been still
carried out. In set operations this variable only admits value 1,
which causes the erasure operation to begin. |
| telProdNpMonInterfEtherCollTable | 1.3.6.1.4.1.2007.4.1.2.2.2.6.3 | | not-accessible | Collisions table: it shows for each Ethernet interface
the counters of frames in transmission that incur collision before
its transmission is completed successfully. The counters register
the number of frames sent successfully after a specified number of
collisions (from 1 to 15 collisions).
The table is crossed with two indexes: The first is the interface
number (Ethernet type), and the second is the number of collisions
that the frame must suffer before reaching its destination. |
| telProdNpMonInterfEtherCollEntry | 1.3.6.1.4.1.2007.4.1.2.2.2.6.3.1 | | not-accessible | Each entry consists of the number of Ethernet interface of the
device, which will be the first table index, the counter of
the frames sent successfully after a certain number of collisions
(there will be 15 counters, to write down the frames that suffer
from 1 collision to 15 collisions before being sent successfully),
which is the second table index, and finally the number of frames
which undergo a certain number of collisions, that is to say,
the value of the corresponding counter of the interface at issue. |
| INT telProdNpMonInterfEtherCollInterfIndex | 1.3.6.1.4.1.2007.4.1.2.2.2.6.3.1.1 | INTEGER | read-only | Number of Ethernet interface of the device that indexes the table
(it is the first index). It is determined by the hardware
configuration of the interface. |
| INT telProdNpMonInterfEtherCollCountIndex | 1.3.6.1.4.1.2007.4.1.2.2.2.6.3.1.2 | INTEGER | read-only | Number of collisions that frames must suffer before
its transmission to be completed successfully to register them
in the corresponding counter. It is the second table index. |
| CTR telProdNpMonInterfEtherCollFrequencies | 1.3.6.1.4.1.2007.4.1.2.2.2.6.3.1.3 | Counter | read-only | Number of frames which reach its destination successfully after
a specific number of collisions. |
