All MIBs › TELDAT-MON-CentrixD-MIB
Category: Teldat Router Management
Description: Monitors Teldat CentrixD device operational status, performance counters, and fault conditions.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TELDAT-MON-CentrixD-MIB?
TELDAT-MON-CentrixD-MIB is a Teldat-specific monitoring MIB for the CentrixD device/module, part of Teldat's product-line monitoring MIB family. As with other Teldat MON MIBs, its general purpose is to expose operational status, performance counters, and fault conditions for this specific feature or hardware component within Teldat routers. Its emphasis is on monitoring hardware and/or software status of the device, surfacing operational state and error/fault conditions so administrators can detect degraded or failed conditions without console access. It likely shares object-naming and structural conventions with sibling Teldat MON MIBs, indicating a dependency on Teldat's common monitoring MIB framework and possibly on standard IF-MIB style interface objects. It is deployed on Teldat routers where the CentrixD feature or component is present, typically in enterprise or carrier network environments using Teldat equipment. Engineers can download the TELDAT-MON-CentrixD-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-MON-CentrixD-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Teldat router with CentrixD component
Monitoring Examples
No object names were available for this module (sample_objects is empty), so a concrete polling scenario cannot be grounded in specific instance data; in practice an administrator would use whatever status and counter objects this MIB defines to poll for CentrixD operational state and fault indications, analogous to how other Teldat MON MIBs expose table-based status and counters. Without visibility into the actual object names, this MIB's exact monitoring targets cannot be confirmed beyond its stated purpose.
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress |
From RFC1213-MIB
| DisplayString |
From TELDAT-MIB
| telproducts | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| telProdCentrixDConfDEP | 1.3.6.1.4.1.2007.4.71.1.1.1 | |||
| INT telProdCentrixDConfDEPFilterDelete | 1.3.6.1.4.1.2007.4.71.1.1.1.1.2.1.5 | INTEGER | read-write | If the value of this variable is set to 1, this entry will be deleted. In GET operations, the value taken by this variable indicates the result of the last operation: ok (2), if the entry was deleted succesfully; error (3), if the operation failed; the value undefined (4) indicates that delete operations have not been made yet. |
| INT telProdCentrixDConfDEPFilterEnable | 1.3.6.1.4.1.2007.4.71.1.1.1.1.1 | INTEGER | read-write | Variable to enable/disable the process of filtering in order to choose which complete and incomplete transactions are going to be stored in the corresponding table. Allowed values for this variable are: (1) enabled (2) disabled. |
| telProdCentrixDConfDEPFilterEntry | 1.3.6.1.4.1.2007.4.71.1.1.1.1.2.1 | not-accessible | Each entry of the filter table contains the configuration parameters corresponding to one of the filters to be applied to complete and incomplete transactions in order to choose which of them are going to be stored in the respective tables. Variables included in each entry are: an index to identify the concrete filter, the filter type (inclusive or exclusive), the pattern of comparison (i.e. the type or class of the value used to select which transactions are stored), the value in which comparison is based and a variable to delete the entry (the filter). | |
| telProdCentrixDConfDEPFilterGroup | 1.3.6.1.4.1.2007.4.71.1.1.1.1 | |||
| INT telProdCentrixDConfDEPFilterIndex | 1.3.6.1.4.1.2007.4.71.1.1.1.1.2.1.1 | INTEGER | read-only | Index of the table: order of the entry inside the table. |
| INT telProdCentrixDConfDEPFilterPattern | 1.3.6.1.4.1.2007.4.71.1.1.1.1.2.1.3 | INTEGER | read-write | Pattern of comparison, i.e. the type or class of the value used to select which complete and incomplete transactions will be stored in the corresponding table. Allowed values for this variable are: (1) serial-number (2) hostname (3) nri. Default value: 2 (hostname). |
| telProdCentrixDConfDEPFilterTable | 1.3.6.1.4.1.2007.4.71.1.1.1.1.2 | not-accessible | The filter table contains one entry for each filter configured. These filters are used to choose which complete and incomplete transactions are going to be stored in the corresponding table (only if filtering process is enabled). | |
| INT telProdCentrixDConfDEPFilterType | 1.3.6.1.4.1.2007.4.71.1.1.1.1.2.1.2 | INTEGER | read-write | Filter type: (1) inclusive, (2) exclusive. Default value: 2 (exclusive). |
| STR telProdCentrixDConfDEPFilterValue | 1.3.6.1.4.1.2007.4.71.1.1.1.1.2.1.4 | DisplayString | read-write | Value of comparison to decide if a transaction is or no stored. Depending of the value taken for the previous variable, this parameter is under the following restrictions: 1. Serial number must be a string corresponding to a valid serial number. 2. Hostname must be a string no longer than 79 characters. 3. NRI must be a string composed of one to 16 digits (a valid X.25 address). Default value is an empty string. |
| telProdCentrixDConfig | 1.3.6.1.4.1.2007.4.71.1 | |||
| telProdCentrixDConfProtocol | 1.3.6.1.4.1.2007.4.71.1.1 | |||
| telProdCentrixDMonDEP | 1.3.6.1.4.1.2007.4.71.2.1.1 | |||
| telProdCentrixDMonDEPSessionsGroup | 1.3.6.1.4.1.2007.4.71.2.1.1.2 | |||
| telProdCentrixDMonDEPSessTcpGroup | 1.3.6.1.4.1.2007.4.71.2.1.1.2.1 | |||
| INT telProdCentrixDMonDEPSessTcpIn | 1.3.6.1.4.1.2007.4.71.2.1.1.2.1.2 | INTEGER | read-only | Number of TCP IN sessions open, this sessions are open by POS. |
| INT telProdCentrixDMonDEPSessTcpOut | 1.3.6.1.4.1.2007.4.71.2.1.1.2.1.3 | INTEGER | read-only | Number of TCP OUT sessions open, this sessions are open from HOST. |
| INT telProdCentrixDMonDEPSessTcpTotal | 1.3.6.1.4.1.2007.4.71.2.1.1.2.1.1 | INTEGER | read-only | Number of DEP sessions open. |
| telProdCentrixDMonDEPTransClearGroup | 1.3.6.1.4.1.2007.4.71.2.1.1.1.1 | |||
| INT telProdCentrixDMonDEPTransClearOk | 1.3.6.1.4.1.2007.4.71.2.1.1.1.1.1 | INTEGER | read-write | Command field to clear ALL correct transactions. If the value of this variable is set to 1, all correct transactions will be deleted. In GET operations, the value taken by this variable indicates the result of the last operation: ok (2), if the entry was deleted succesfully; error (3), if the operation failed; the value undefined (4) indicates that delete operations have not been made yet. |
| INT telProdCentrixDMonDEPTransClearWrong | 1.3.6.1.4.1.2007.4.71.2.1.1.1.1.2 | INTEGER | read-write | Command field to clear ALL wrong or incomplete transactions. If the value of this variable is set to 1, all wrong transactions will be deleted. In GET operations, the value taken by this variable indicates the result of the last operation: ok (2), if the entry was deleted succesfully; error (3), if the operation failed; the value undefined (4) indicates that delete operations have not been made yet. |
| telProdCentrixDMonDEPTransGroup | 1.3.6.1.4.1.2007.4.71.2.1.1.1 | |||
| INT telProdCentrixDMonDEPTransOkCause | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.11 | INTEGER | read-only | This variable indicates the reason why the connection failed. Possible values are: (1) X.25 call released by the host (2) EOT received: POS Disconnection (3) T4 received: POS Disconnection (4) Unexpected X.25 data received (5) X.25 call released by POS: the host has received a L message which is not a response to a previous L message sent. (51) X.25 call released by the host (52) Timeout waiting X25 establish. (53) Release from POS: EOT received. (57) Bad message waiting S message. (58) Timeout waiting message ends from POS. (59) Timeout waiting message start from POS, E5. (60) Reach max number of retransmissions send to POS, due NAK. (61) Reach max number of retransmissions send to POS, due timeout. (62) Reach max number of bad messages received from POS. (63) Was received a message too short. (64) Reach max number of bad data received from POS, in E2. (65) Timeout waiting message start from POS, in E2. (66) Timeout waiting ACK from POS. (68) Timeout waiting a Host answers. (70) TCP session release from remote end (POS). (80) NA (X25) not found in Host regiters configuration. (81) Timeout opening TCP session to Host. (82) TCP session closed by Host. (83) Max. TCP Host session time expired. |
| OCT telProdCentrixDMonDEPTransOkDate | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.4 | OCTET STRING | read-only | This variable indicates the date the operation was carried out on. |
| INT telProdCentrixDMonDEPTransOkDiagn | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.13 | INTEGER | read-only | This variable indicates the diagnosis of the X.25 call release. |
| OCT telProdCentrixDMonDEPTransOkEndTime | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.3 | OCTET STRING | read-only | This variable indicates the end time of the operation. |
| telProdCentrixDMonDEPTransOkEntry | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1 | not-accessible | Each entry contains information about one completed transaction and it is composed of the following fields: an index to identify the transaction in the table, start and end time and date of the operation, three variables for the three possible identifiers associated to the remote peer, type of transaction, IP address of the remote peer that carried out the operation, X.25 address that the datafone calls, the reason why the connection failed, the reason why the X.25 connection was released, the diagnosis of the X.25 call release and the DEP fsm state when the transaction was stored. | |
| telProdCentrixDMonDEPTransOkGroup | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2 | |||
| STR telProdCentrixDMonDEPTransOkId1 | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.5 | DisplayString | read-only | First identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a first identifier. |
| STR telProdCentrixDMonDEPTransOkId2 | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.6 | DisplayString | read-only | Second identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a second identifier. |
| STR telProdCentrixDMonDEPTransOkId3 | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.7 | DisplayString | read-only | Third identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a third identifier. |
| INT telProdCentrixDMonDEPTransOkIndex | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.1 | INTEGER | read-only | Index of the table: order of the entry inside the table. |
| IP telProdCentrixDMonDEPTransOkIpAddr | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.9 | IpAddress | read-only | IP address of the remote peer that carried out the operation. |
| CTR telProdCentrixDMonDEPTransOkNoFiltNumber | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.2 | Counter | read-only | Total number of completed transactions carried out and stored in the corresponding table (not filtered) since last restart. |
| STR telProdCentrixDMonDEPTransOkNri | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.10 | DisplayString | read-only | X.25 address that the datafone calls. |
| CTR telProdCentrixDMonDEPTransOkNumber | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.1 | Counter | read-only | Total number of completed transactions carried out since last restart, filtered or not filtered (stored in the corresponding table). |
| OCT telProdCentrixDMonDEPTransOkStartTime | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.2 | OCTET STRING | read-only | This variable indicates the start time of the operation. |
| INT telProdCentrixDMonDEPTransOkState | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.14 | INTEGER | read-only | This variable indicates the DEP fsm state when the transaction was stored. |
| telProdCentrixDMonDEPTransOkTable | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3 | not-accessible | Table with the latest transactions carried out that have been sucessfully completed. Each entry contains information about one single completed transaction. | |
| STR telProdCentrixDMonDEPTransOkType | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.8 | DisplayString | read-only | Type of transaction performed. Values: '0' authorization or purchase '1' repayment '2' repetition '3' enquiry '4' close '5' account-entity selection '6' operation details '8' account enquiry '9' movement enquiry 'M' memory inicialization/setup 'U' Unknown. |
| INT telProdCentrixDMonDEPTransOkX25Cause | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.12 | INTEGER | read-only | This variable indicates the reason why the X.25 connection was released. |
| INT telProdCentrixDMonDEPTransWroCause | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.11 | INTEGER | read-only | This variable indicates the reason why the connection failed. Possible values are: (1) X.25 call released by the host (2) EOT received: POS Disconnection (3) T4 received: POS Disconnection (4) Unexpected X.25 data received (5) X.25 call released by POS: the host has received a L message which is not a response to a previous L message sent. (51) X.25 call released by the host (52) Timeout waiting X25 establish. (53) Release from POS: EOT received. (57) Bad message waiting S message. (58) Timeout waiting message ends from POS. (59) Timeout waiting message start from POS, E5. (60) Reach max number of retransmissions send to POS, due NAK. (61) Reach max number of retransmissions send to POS, due timeout. (62) Reach max number of bad messages received from POS. (63) Was received a message too short. (64) Reach max number of bad data received from POS, in E2. (65) Timeout waiting message start from POS, in E2. (66) Timeout waiting ACK from POS. (68) Timeout waiting a Host answers. (70) TCP session release from remote end (POS). (80) NA (X25) not found in Host regiters configuration. (81) Timeout opening TCP session to Host. (82) TCP session closed by Host. (83) Max. TCP Host session time expired. |
| OCT telProdCentrixDMonDEPTransWroDate | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.4 | OCTET STRING | read-only | This variable indicates the date the operation was carried out on. |
| INT telProdCentrixDMonDEPTransWroDiagn | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.13 | INTEGER | read-only | This variable indicates the diagnosis of the X.25 call release. |
| OCT telProdCentrixDMonDEPTransWroEndTime | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.3 | OCTET STRING | read-only | This variable indicates the end time of the operation. |
| telProdCentrixDMonDEPTransWroEntry | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1 | not-accessible | Each entry contains information about one incomplete transaction and it is composed of the following fields: an index to identify the transaction in the table, start and end time and date of the operation, three variables for the three possible identifiers associated to the remote peer, type of transaction, IP address of the remote peer that tried to carry out the operation, X.25 address that the datafone called, the reason why the connection failed, the reason why the X.25 connection was released, the diagnosis of the X.25 call release and the DEP fsm state when the transaction was stored. | |
| telProdCentrixDMonDEPTransWroGroup | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3 | |||
| STR telProdCentrixDMonDEPTransWroId1 | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.5 | DisplayString | read-only | First identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a first identifier. |
| STR telProdCentrixDMonDEPTransWroId2 | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.6 | DisplayString | read-only | Second identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a second identifier. |
| STR telProdCentrixDMonDEPTransWroId3 | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.7 | DisplayString | read-only | Third identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a third identifier. |
| INT telProdCentrixDMonDEPTransWroIndex | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.1 | INTEGER | read-only | Index of the table: order of the entry inside the table. |
| IP telProdCentrixDMonDEPTransWroIpAddr | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.9 | IpAddress | read-only | IP address of the remote peer that carried out the operation. |
| CTR telProdCentrixDMonDEPTransWroNoFiltNumber | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.2 | Counter | read-only | Total number of transactions that have not been sucessfully completed and stored in the corresponding table (not filtered) since last restart. |
| STR telProdCentrixDMonDEPTransWroNri | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.10 | DisplayString | read-only | X.25 address that the datafone called. |
| CTR telProdCentrixDMonDEPTransWroNumber | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.1 | Counter | read-only | Total number of transactions that have not been sucessfully completed since last restart, filtered or not filtered (stored in the corresponding table). |
| OCT telProdCentrixDMonDEPTransWroStartTime | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.2 | OCTET STRING | read-only | This variable indicates the start time of the operation. |
| INT telProdCentrixDMonDEPTransWroState | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.14 | INTEGER | read-only | This variable indicates the DEP fsm state when the transaction was stored. |
| telProdCentrixDMonDEPTransWroTable | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3 | not-accessible | Table with the latest transactions that have not been sucessfully completed. Each entry contains information about one incomplete transaction. | |
| STR telProdCentrixDMonDEPTransWroType | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.8 | DisplayString | read-only | Type of transaction performed. Values: '0' authorization or purchase '1' repayment '2' repetition '3' enquiry '4' close '5' account-entity selection '6' operation details '8' account enquiry '9' movement enquiry 'M' memory inicialization/setup 'U' Unknown. |
| INT telProdCentrixDMonDEPTransWroX25Cause | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.12 | INTEGER | read-only | This variable indicates the reason why the X.25 connection was released. |
| INT telProdCentrixDMonDEPTraOkNewCause | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.11 | INTEGER | read-only | This variable indicates the reason why the connection failed. Possible values are: (1) X.25 call released by the host (2) EOT received: POS Disconnection (3) T4 received: POS Disconnection (4) Unexpected X.25 data received (5) X.25 call released by POS: the host has received a L message which is not a response to a previous L message sent. (51) X.25 call released by the host (52) Timeout waiting X25 establish. (53) Release from POS: EOT received. (57) Bad message waiting S message. (58) Timeout waiting message ends from POS. (59) Timeout waiting message start from POS, E5. (60) Reach max number of retransmissions send to POS, due NAK. (61) Reach max number of retransmissions send to POS, due timeout. (62) Reach max number of bad messages received from POS. (63) Was received a message too short. (64) Reach max number of bad data received from POS, in E2. (65) Timeout waiting message start from POS, in E2. (66) Timeout waiting ACK from POS. (68) Timeout waiting a Host answers. (70) TCP session release from remote end (POS). (80) NA (X25) not found in Host regiters configuration. (81) Timeout opening TCP session to Host. (82) TCP session closed by Host. (83) Max. TCP Host session time expired. |
| OCT telProdCentrixDMonDEPTraOkNewDate | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.4 | OCTET STRING | read-only | This variable indicates the date the operation was carried out on. |
| INT telProdCentrixDMonDEPTraOkNewDiagn | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.13 | INTEGER | read-only | This variable indicates the diagnosis of the X.25 call release. |
| OCT telProdCentrixDMonDEPTraOkNewEndTime | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.3 | OCTET STRING | read-only | This variable indicates the end time of the operation. |
| telProdCentrixDMonDEPTraOkNewEntry | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1 | not-accessible | This table has only one entry which contains information about the first of the latest transactions that have been sucessfully completed, that have been stored in the corresponding table (have not been filtered) and that have not been sent to the manager station yet. It is composed of the following fields: an index to identify the transaction in the table (it always takes the value 1), start and end time and date of the operation, three variables for the three possible identifiers associated to the remote peer, type of transaction, IP address of the remote peer that carried out the operation, X.25 address that the datafone calls, the reason why the connection failed, the reason why the X.25 connection was released, the diagnosis of the X.25 call release and the DEP fsm state when the transaction was stored. | |
| STR telProdCentrixDMonDEPTraOkNewId1 | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.5 | DisplayString | read-only | First identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a first identifier. |
| STR telProdCentrixDMonDEPTraOkNewId2 | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.6 | DisplayString | read-only | Second identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a second identifier. |
| STR telProdCentrixDMonDEPTraOkNewId3 | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.7 | DisplayString | read-only | Third identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a third identifier. |
| INT telProdCentrixDMonDEPTraOkNewIndex | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.1 | INTEGER | read-only | Index of the table: order of the entry inside the table. It can only takes the value 1. |
| IP telProdCentrixDMonDEPTraOkNewIpAddr | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.9 | IpAddress | read-only | IP address of the remote peer that carried out the operation. |
| STR telProdCentrixDMonDEPTraOkNewNri | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.10 | DisplayString | read-only | X.25 address that the datafone calls. |
| OCT telProdCentrixDMonDEPTraOkNewStartTime | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.2 | OCTET STRING | read-only | This variable indicates the start time of the operation. |
| INT telProdCentrixDMonDEPTraOkNewState | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.14 | INTEGER | read-only | This variable indicates the DEP fsm state when the transaction was stored. |
| telProdCentrixDMonDEPTraOkNewTable | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4 | not-accessible | This table has only one entry which contains information about the first of the latest transactions that have been sucessfully completed, that have been stored in the corresponding table (have not been filtered) and that have not been sent to the manager station yet. | |
| STR telProdCentrixDMonDEPTraOkNewType | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.8 | DisplayString | read-only | Type of transaction performed. Values: '0' authorization or purchase '1' repayment '2' repetition '3' enquiry '4' close '5' account-entity selection '6' operation details '8' account enquiry '9' movement enquiry 'M' memory inicialization/setup 'U' Unknown. |
| INT telProdCentrixDMonDEPTraOkNewX25Cause | 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.12 | INTEGER | read-only | This variable indicates the reason why the X.25 connection was released. |
| INT telProdCentrixDMonDEPTraWroNewCause | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.11 | INTEGER | read-only | This variable indicates the reason why the connection failed. Possible values are: (1) X.25 call released by the host (2) EOT received: POS Disconnection (3) T4 received: POS Disconnection (4) Unexpected X.25 data received (5) X.25 call released by POS: the host has received a L message which is not a response to a previous L message sent. (51) X.25 call released by the host (52) Timeout waiting X25 establish. (53) Release from POS: EOT received. (57) Bad message waiting S message. (58) Timeout waiting message ends from POS. (59) Timeout waiting message start from POS, E5. (60) Reach max number of retransmissions send to POS, due NAK. (61) Reach max number of retransmissions send to POS, due timeout. (62) Reach max number of bad messages received from POS. (63) Was received a message too short. (64) Reach max number of bad data received from POS, in E2. (65) Timeout waiting message start from POS, in E2. (66) Timeout waiting ACK from POS. (68) Timeout waiting a Host answers. (70) TCP session release from remote end (POS). (80) NA (X25) not found in Host regiters configuration. (81) Timeout opening TCP session to Host. (82) TCP session closed by Host. (83) Max. TCP Host session time expired. |
| OCT telProdCentrixDMonDEPTraWroNewDate | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.4 | OCTET STRING | read-only | This variable indicates the date the operation was carried out on. |
| INT telProdCentrixDMonDEPTraWroNewDiagn | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.13 | INTEGER | read-only | This variable indicates the diagnosis of the X.25 call release. |
| OCT telProdCentrixDMonDEPTraWroNewEndTime | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.3 | OCTET STRING | read-only | This variable indicates the end time of the operation. |
| telProdCentrixDMonDEPTraWroNewEntry | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1 | not-accessible | This table has only one entry which contains information about the first of the latest transactions that have not been sucessfully completed, that have been stored in the corresponding table (have not been filtered) and that have not been sent to the manager station yet. It is composed of the following fields: an index to identify the transaction in the table (it always takes the value 1), start and end time and date of the operation, three variables for the three possible identifiers associated to the remote peer, type of transaction, IP address of the remote peer that tried to carry out the operation, X.25 address that the datafone called, the reason why the connection failed, the reason why the X.25 connection was released, the diagnosis of the X.25 call release and the DEP fsm state when the transaction was stored. | |
| STR telProdCentrixDMonDEPTraWroNewId1 | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.5 | DisplayString | read-only | First identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a first identifier. |
| STR telProdCentrixDMonDEPTraWroNewId2 | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.6 | DisplayString | read-only | Second identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a second identifier. |
| STR telProdCentrixDMonDEPTraWroNewId3 | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.7 | DisplayString | read-only | Third identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a third identifier. |
| INT telProdCentrixDMonDEPTraWroNewIndex | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.1 | INTEGER | read-only | Index of the table: order of the entry inside the table. It can only takes the value 1. |
| IP telProdCentrixDMonDEPTraWroNewIpAddr | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.9 | IpAddress | read-only | IP address of the remote peer that carried out the operation. |
| STR telProdCentrixDMonDEPTraWroNewNri | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.10 | DisplayString | read-only | X.25 address that the datafone called. |
| OCT telProdCentrixDMonDEPTraWroNewStartTime | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.2 | OCTET STRING | read-only | This variable indicates the start time of the operation. |
| INT telProdCentrixDMonDEPTraWroNewState | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.14 | INTEGER | read-only | This variable indicates the DEP fsm state when the transaction was stored. |
| telProdCentrixDMonDEPTraWroNewTable | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4 | not-accessible | This table has only one entry which contains information about the first of the latest transactions that have not been sucessfully completed, that have been stored in the corresponding table (have not been filtered) and that have not been sent to the manager station yet. | |
| STR telProdCentrixDMonDEPTraWroNewType | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.8 | DisplayString | read-only | Type of transaction performed. Values: '0' authorization or purchase '1' repayment '2' repetition '3' enquiry '4' close '5' account-entity selection '6' operation details '8' account enquiry '9' movement enquiry 'M' memory inicialization/setup 'U' Unknown. |
| INT telProdCentrixDMonDEPTraWroNewX25Cause | 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.12 | INTEGER | read-only | This variable indicates the reason why the X.25 connection was released. |
| telProdCentrixDMonit | 1.3.6.1.4.1.2007.4.71.2 | |||
| telProdCentrixDMonProtocol | 1.3.6.1.4.1.2007.4.71.2.1 | |||
| telProductsCentrixD | 1.3.6.1.4.1.2007.4.71 |
RFC description
SNMP MIB for Teldat Centrix D equipment monitoring and management. Provides SNMP-based monitoring capabilities for Teldat network devices supporting SNMP versions 1, 2c, and 3.
Start monitoring Teldat router with CentrixD component (feature operational/fault status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.