TELDAT-MON-CommonInfo-MIB

All MIBs › TELDAT-MON-CommonInfo-MIB

Category: Teldat Router Management

Description: Provides common monitoring information for Teldat routers, including system identity, uptime, and shared diagnostic objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TELDAT-MON-CommonInfo-MIB?

TELDAT-MON-CommonInfo-MIB is a vendor-specific MIB module from Teldat, a Spanish networking equipment maker, that provides common monitoring infrastructure shared across Teldat router MIBs. It exposes generic system identity, uptime, and shared diagnostic status objects rather than a single dedicated feature area. Its core monitoring use is confirming basic device health: whether the router is alive, how long it has been running (uptime), and baseline diagnostic status that other monitoring MIBs build on. As a common/shared module it is typically imported by other Teldat vendor MIBs rather than used standalone, so it has an implicit dependency relationship with the rest of the Teldat MIB family. It is deployed wherever Teldat routers or branch-office CPE are managed via SNMP, typically in enterprise or telco access networks. Engineers can download the TELDAT-MON-CommonInfo-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-MON-CommonInfo-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Teldat router
Teldat branch/CPE networking device

Monitoring Examples

No sample objects were provided for this module, so specific OID names cannot be cited; consistent with its role as a common-info MIB, it would be expected to expose identity and uptime-style objects analogous to sysUpTime that other Teldat monitoring MIBs reference. An administrator would use such shared objects to confirm a router is responsive and to correlate an uptime reset with an unplanned reboot.

What Can Be Monitored

system uptime
system identity
shared diagnostic status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter

From RFC1213-MIB

DisplayString

From TELDAT-SW-STRUCTURE-MIB

telProdNpMonInterfRouter	OBJECT-IDENTITY
telProdNpMonInterface	OBJECT-IDENTITY
telProdNpMonitSistema	OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
telProdNpMonSistemMemory	1.3.6.1.4.1.2007.4.1.2.1.1
INT telProdNpMonSistemMemSize	1.3.6.1.4.1.2007.4.1.2.1.1.1	INTEGER	read-only	System Memory Size.
INT telProdNpMonSistemMemAvailable	1.3.6.1.4.1.2007.4.1.2.1.1.2	INTEGER	read-only	Available System Memory Size.
INT telProdNpMonSistemMemPooldissize	1.3.6.1.4.1.2007.4.1.2.1.1.3	INTEGER	read-only	Size of the memory area reserved to the task that manage the disk.
INT telProdNpMonSistemMemPooldisavailable	1.3.6.1.4.1.2007.4.1.2.1.1.4	INTEGER	read-only	Free space in the memory area reserved to the task that manages the disk.
INT telProdNpMonSistemMemPoolmdissize	1.3.6.1.4.1.2007.4.1.2.1.1.5	INTEGER	read-only	Size of the memory area reserved to save information messages of the disk task.
INT telProdNpMonSistemMemPoolmdisavailable	1.3.6.1.4.1.2007.4.1.2.1.1.6	INTEGER	read-only	Free space in the memory area reserved to save information messages of the disk task.
INT telProdNpMonSistemMemPooltsize	1.3.6.1.4.1.2007.4.1.2.1.1.7	INTEGER	read-only	Size of the memory area reserved to save the application temporal variables.
INT telProdNpMonSistemMemPooltavailable	1.3.6.1.4.1.2007.4.1.2.1.1.8	INTEGER	read-only	Free space in the memory area reserved to save the application temporal variables.
INT telProdNpMonSistemMemPoolpsize	1.3.6.1.4.1.2007.4.1.2.1.1.9	INTEGER	read-only	Size of the memory area reserved to save the application permanent variables.
INT telProdNpMonSistemMemPoolpavailable	1.3.6.1.4.1.2007.4.1.2.1.1.10	INTEGER	read-only	Free space in the memory area reserved to save the application permanent variables.
INT telProdNpMonSistemMemPool0size	1.3.6.1.4.1.2007.4.1.2.1.1.11	INTEGER	read-only	Size of the memory area 0 reserved to messages of the node side.
INT telProdNpMonSistemMemPool0restpart	1.3.6.1.4.1.2007.4.1.2.1.1.12	INTEGER	read-only	Number of partitions of the memory area 0 reserved to messages of the node side.
INT telProdNpMonSistemMemPool0available	1.3.6.1.4.1.2007.4.1.2.1.1.13	INTEGER	read-only	Number of available partitions of the memory area 0 reserved to messages of the node side.
INT telProdNpMonSistemMemPool1size	1.3.6.1.4.1.2007.4.1.2.1.1.14	INTEGER	read-only	Size of the memory area 1 reserved to messages of the node side.
INT telProdNpMonSistemMemPool1restpart	1.3.6.1.4.1.2007.4.1.2.1.1.15	INTEGER	read-only	Number of partitions of the memory area 1 reserved to messages of the node side.
INT telProdNpMonSistemMemPool1available	1.3.6.1.4.1.2007.4.1.2.1.1.16	INTEGER	read-only	Number of available partitions of the memory area 1 reserved to messages of the node side.
INT telProdNpMonSistemMemPool2size	1.3.6.1.4.1.2007.4.1.2.1.1.17	INTEGER	read-only	Size of the memory area 2 reserved to messages of the node side.
INT telProdNpMonSistemMemPool2restpart	1.3.6.1.4.1.2007.4.1.2.1.1.18	INTEGER	read-only	Number of partitions of the memory area 2 reserved to messages of the node side.
INT telProdNpMonSistemMemPool2available	1.3.6.1.4.1.2007.4.1.2.1.1.19	INTEGER	read-only	Number of available partitions of the memory area 2 reserved to messages of the node side.
INT telProdNpMonSistemMemPoolisize	1.3.6.1.4.1.2007.4.1.2.1.1.20	INTEGER	read-only	Size of the memory area reserved to messages of the routers side.
INT telProdNpMonSistemMemPoolirestpart	1.3.6.1.4.1.2007.4.1.2.1.1.21	INTEGER	read-only	Number of partitions of the memory area reserved to messages of the router side.
INT telProdNpMonSistemMemPooliavailable	1.3.6.1.4.1.2007.4.1.2.1.1.22	INTEGER	read-only	Number of available partitions of the memory area reserved to messages of the router side.
INT telProdNpMonSistemMemPooldlssize	1.3.6.1.4.1.2007.4.1.2.1.1.23	INTEGER	read-only	Size of the memory area reserved to DLS messages.
INT telProdNpMonSistemMemPooldlsrestpart	1.3.6.1.4.1.2007.4.1.2.1.1.24	INTEGER	read-only	Number of partitions of the memory area reserved to DLS messages.
INT telProdNpMonSistemMemPooldlsavailable	1.3.6.1.4.1.2007.4.1.2.1.1.25	INTEGER	read-only	Number of available partitions of the memory area reserved to DLS messages.
INT telProdNpMonSistemMemTotal	1.3.6.1.4.1.2007.4.1.2.1.1.26	INTEGER	read-only	Total system memory in bytes.
INT telProdNpMonSistemMemTotalcache	1.3.6.1.4.1.2007.4.1.2.1.1.27	INTEGER	read-only	Total cache memory in bytes.
INT telProdNpMonSistemMemFreecache	1.3.6.1.4.1.2007.4.1.2.1.1.28	INTEGER	read-only	Available free cache memory in bytes.
INT telProdNpMonSistemMemTotalnoncache	1.3.6.1.4.1.2007.4.1.2.1.1.29	INTEGER	read-only	Total non cache memory in bytes.
INT telProdNpMonSistemMemFreenoncache	1.3.6.1.4.1.2007.4.1.2.1.1.30	INTEGER	read-only	Free non cache memory in bytes.
STR telProdNpMonSistemMemCaches	1.3.6.1.4.1.2007.4.1.2.1.1.31	DisplayString	read-only	Caches.
INT telProdNpMonSistemMemFlash	1.3.6.1.4.1.2007.4.1.2.1.1.32	INTEGER	read-only	System flash memory in bytes.
INT telProdNpMonSistemMemFreeglobbuffer	1.3.6.1.4.1.2007.4.1.2.1.1.33	INTEGER	read-only	Number of available public buffers in the system.
INT telProdNpMonSistemMemHeap	1.3.6.1.4.1.2007.4.1.2.1.1.34	INTEGER	read-only	Size of the available heap in bytes.
INT telProdNpMonSistemMemIcused	1.3.6.1.4.1.2007.4.1.2.1.1.35	INTEGER	read-only	Used CPU percentage.
INT telProdNpMonSistemMemIcindex	1.3.6.1.4.1.2007.4.1.2.1.1.36	INTEGER	read-only	CPU index.
INT telProdNpMonSistemMemTc	1.3.6.1.4.1.2007.4.1.2.1.1.37	INTEGER	read-only	Cycle Time.
telProdNpMonSistemFan	1.3.6.1.4.1.2007.4.1.2.1.3
INT telProdNpMonSistemFanCpu	1.3.6.1.4.1.2007.4.1.2.1.3.1	INTEGER	read-only	CPU Fanspeed in rpm
INT telProdNpMonSistemFanCpuPerCent	1.3.6.1.4.1.2007.4.1.2.1.3.2	INTEGER	read-only	CPU Fanspeed in percentage of nominal value
INT telProdNpMonSistemFanCase	1.3.6.1.4.1.2007.4.1.2.1.3.3	INTEGER	read-only	Case Fanspeed in rpm
INT telProdNpMonSistemFanCasePerCent	1.3.6.1.4.1.2007.4.1.2.1.3.4	INTEGER	read-only	Case Fanspeed in percentage of nominal value
telProdNpMonPoeCardsTable	1.3.6.1.4.1.2007.4.1.2.1.4		not-accessible	Table to show if Poe Card are present.
telProdNpMonPoeCardsEntry	1.3.6.1.4.1.2007.4.1.2.1.4.1		not-accessible	Each entry corresponds to POE card.
INT telProdNpMonPoeCardsInd	1.3.6.1.4.1.2007.4.1.2.1.4.1.1	INTEGER	read-only	Index number (table index).
STR telProdNpMonPoeCardsState	1.3.6.1.4.1.2007.4.1.2.1.4.1.2	DisplayString	read-only	Shows which POE Card is present.
telProdNpMonInterfCommandsTable	1.3.6.1.4.1.2007.4.1.2.2.1		not-accessible	Table used to delete general statistics of nets (not of nodes).
telProdNpMonInterfCommandsEntry	1.3.6.1.4.1.2007.4.1.2.2.1.1		not-accessible	Each entry corresponds to a net interface.
INT telProdNpMonInterfCommandsIfc	1.3.6.1.4.1.2007.4.1.2.2.1.1.1	INTEGER	read-only	Interface number (table index).
INT telProdNpMonInterfCommandsClear	1.3.6.1.4.1.2007.4.1.2.2.1.1.2	INTEGER	read-write	Statistics Delete command for the chosen interface. If the operation successes (2) valid will appear. If the operation could not be performed (3)error will appear. If no delete operation has been performed (4)undefined will appear.
telProdNpMonInterfBufferTable	1.3.6.1.4.1.2007.4.1.2.2.2.1		not-accessible	It shows information about the packet buffers assigned to each interface.
telProdNpMonInterfBufferEntry	1.3.6.1.4.1.2007.4.1.2.2.2.1.1		not-accessible	Each entry corresponds to information about an interface.
INT telProdNpMonInterfBufferIfc	1.3.6.1.4.1.2007.4.1.2.2.2.1.1.1	INTEGER	read-only	Interface number (table index).
INT telProdNpMonInterfBufferKind	1.3.6.1.4.1.2007.4.1.2.2.2.1.1.2	INTEGER	read-only	Interface type. VI, VI LNI PN, ProNET PRI, PRI IFC CH, CHAOS Net XETH, Experimental EtherNet (3 MBit) ARPA, ARPANet CHP, CHAOS protocol net OSL, Serial line interface Eth, EtherNet (10 MBit) SL, New serial line link X28, X.28 DMR, DEC DMR interface TKR, 802.5 token ring SNK, Sink network (not a real network) X25, X25 network MAN, 802.6 metro area network ATR, Apollo Token Ring FDDI, FDDI SRLY, SDLC relay int IPPN, IP Protocol Net FR, Frame Relay network PPP, PPP network BDG, Bridging pseudo-handler NULL, Null device GWT-NTYPE-B-ISDN, ISDN network B channel SDLC, TRUE SDLC int V25B, V.25bis base network R->N, Teldat Micro-node N->R, Teldat Router GWT-NTYPE-D-ISDN, RDSI D channel 270, 270 Virtual port XOT, XOT TNIP, IP tunnel MPPP, PPP Multilink ATM, ATM Interface SUBATM, ATM subinterface IPSEC, IPSEC BRI, RDSI (2Bs) X25-FAK, X25 fake ISDNB-FAK, ISDNB fake ISDND-FAK, ISDND fake XOT-FAK, XOT fake 270-FAK, 270 fake ASDP, Asynchronous serial device SYNC-SL, Synchronous serial line ASYNC-SL, Asynchronous serial line APTB, Asynchronous serial line DIALROUT, Fake for Dial Routing ARLY, AP alarms relay MEM, PCI Memory card VLAN-ETH, VLAN Ethernet VOIP, VoIP card L2TP, L2TP Virtual Interface BVI, Bridge Virtual Interface SCADA, SCADA Virtual Interface WLAN, Wireless LAN SEPI, Serial Event Printing Interface EIB-Z, Zennio EIB Adapter GPIO, General Parallel I/O AUTO-SL, Synchronous serial line MDMEMU, Modem Emulator Interface FR-SUB, FR subinterface BVI-SUB, BVI subinterface NIC, USB-NIC Device DIP, Generic DirectIP encapsulation IEC101GW, SCADA Virtual Interface GPS, GPS Receiver Interface GPSDATA-SL, GPS DATA Serial line
INT telProdNpMonInterfBufferOrder	1.3.6.1.4.1.2007.4.1.2.2.2.1.1.3	INTEGER	read-only	This type interface number.
INT telProdNpMonInterfBufferReq	1.3.6.1.4.1.2007.4.1.2.2.2.1.1.4	INTEGER	read-only	Number of input buffers requiered.
INT telProdNpMonInterfBufferAlloc	1.3.6.1.4.1.2007.4.1.2.2.2.1.1.5	INTEGER	read-only	Number of input buffers assigned.
INT telProdNpMonInterfBufferLow	1.3.6.1.4.1.2007.4.1.2.2.2.1.1.6	INTEGER	read-only	Low water mark (flow control).
INT telProdNpMonInterfBufferCurr	1.3.6.1.4.1.2007.4.1.2.2.2.1.1.7	INTEGER	read-only	Current number of input buffers to this device. If the value is 0, the device is disabled. When the packet is received, if the value of Curr in lower than Low, then the flow control can choose it.
INT telProdNpMonInterfBufferHdr	1.3.6.1.4.1.2007.4.1.2.2.2.1.1.8	INTEGER	read-only	It is the maximum value between the following two: The largest LLC, plus MAC, plus the header size of the output device. The MAC plus the header size of the output device.
INT telProdNpMonInterfBufferWrap	1.3.6.1.4.1.2007.4.1.2.2.2.1.1.9	INTEGER	read-only	Given range for MAC, LLC, or network layer.
INT telProdNpMonInterfBufferData	1.3.6.1.4.1.2007.4.1.2.2.2.1.1.10	INTEGER	read-only	Maximum size of the data link layer packet.
INT telProdNpMonInterfBufferTrail	1.3.6.1.4.1.2007.4.1.2.2.2.1.1.11	INTEGER	read-only	Addition of the largest MAC and the hardware trailers.
INT telProdNpMonInterfBufferTotal	1.3.6.1.4.1.2007.4.1.2.2.2.1.1.12	INTEGER	read-only	Global size of each packet buffer.
INT telProdNpMonInterfBufferAlloc2	1.3.6.1.4.1.2007.4.1.2.2.2.1.1.13	INTEGER	read-only	Amount of buffer memory bytes for this device. This value is calculated multiplying Curr by Total.
telProdNpMonInterfGeneralTable	1.3.6.1.4.1.2007.4.1.2.2.2.2		not-accessible	Table that shows statistic information about interfaces.
telProdNpMonInterfGeneralEntry	1.3.6.1.4.1.2007.4.1.2.2.2.2.1		not-accessible	Each entry corresponds to an interface.
INT telProdNpMonInterfGeneralIfc	1.3.6.1.4.1.2007.4.1.2.2.2.2.1.1	INTEGER	read-only	Interface number (table index).
INT telProdNpMonInterfGeneralKind	1.3.6.1.4.1.2007.4.1.2.2.2.2.1.2	INTEGER	read-only	Interface type. VI, VI LNI PN, ProNET PRI, PRI IFC CH, CHAOS Net XETH, Experimental EtherNet (3 MBit) ARPA, ARPANet CHP, CHAOS protocol net OSL, Serial line interface Eth, EtherNet (10 MBit) SL, New serial line link X28, X.28 DMR, DEC DMR interface TKR, 802.5 token ring SNK, Sink network (not a real network) X25, X25 network MAN, 802.6 metro area network ATR, Apollo Token Ring FDDI, FDDI SRLY, SDLC relay int IPPN, IP Protocol Net FR, Frame Relay network PPP, PPP network BDG, Bridging pseudo-handler NULL, Null device GWT-NTYPE-B-ISDN, ISDN network B channel SDLC, TRUE SDLC int V25B, V.25bis base network R->N, Teldat Micro-node N->R, Teldat Router GWT-NTYPE-D-ISDN, RDSI D channel 270, 270 Virtual port XOT, XOT TNIP, IP tunnel MPPP, PPP Multilink ATM, ATM Interface SUBATM, ATM subinterface IPSEC, IPSEC BRI, RDSI (2Bs) X25-FAK, X25 fake ISDNB-FAK, ISDNB fake ISDND-FAK, ISDND fake XOT-FAK, XOT fake 270-FAK, 270 fake ASDP, Asynchronous serial device SYNC-SL, Synchronous serial line ASYNC-SL, Asynchronous serial line APTB, Asynchronous serial line DIALROUT, Fake for Dial Routing ARLY, AP alarms relay MEM, PCI Memory card VLAN-ETH, VLAN Ethernet VOIP, VoIP card L2TP, L2TP Virtual Interface BVI, Bridge Virtual Interface SCADA, SCADA Virtual Interface WLAN, Wireless LAN SEPI, Serial Event Printing Interface EIB-Z, Zennio EIB Adapter GPIO, General Parallel I/O AUTO-SL, Synchronous serial line MDMEMU, Modem Emulator Interface FR-SUB, FR subinterface BVI-SUB, BVI subinterface NIC, USB-NIC Device DIP, Generic DirectIP encapsulation IEC101GW, SCADA Virtual Interface GPS, GPS Receiver Interface GPSDATA-SL, GPS DATA Serial line
INT telProdNpMonInterfGeneralOrder	1.3.6.1.4.1.2007.4.1.2.2.2.2.1.3	INTEGER	read-only	This type interface number.
INT telProdNpMonInterfGeneralCsr	1.3.6.1.4.1.2007.4.1.2.2.2.2.1.4	INTEGER	read-only	Command and Status Register address.
INT telProdNpMonInterfGeneralVect	1.3.6.1.4.1.2007.4.1.2.2.2.2.1.5	INTEGER	read-only	Interruption vector.
CTR telProdNpMonInterfGeneralTestvalid	1.3.6.1.4.1.2007.4.1.2.2.2.2.1.6	Counter	read-only	Times the auto-test has succeded (the interface status changes from down to up).
CTR telProdNpMonInterfGeneralTestfailure	1.3.6.1.4.1.2007.4.1.2.2.2.2.1.7	Counter	read-only	Times the auto-test has failed (the interface status changes from up to down).
CTR telProdNpMonInterfGeneralMaintenFailure	1.3.6.1.4.1.2007.4.1.2.2.2.2.1.8	Counter	read-only	Number of maintenance failures.
telProdNpMonInterfErrorsTable	1.3.6.1.4.1.2007.4.1.2.2.2.3		not-accessible	Error table. It shows error statistics for the network.
telProdNpMonInterfErrorsEntry	1.3.6.1.4.1.2007.4.1.2.2.2.3.1		not-accessible	Each entry reports the interface errors.
INT telProdNpMonInterfErrorsIfc	1.3.6.1.4.1.2007.4.1.2.2.2.3.1.1	INTEGER	read-only	Interface number. Table index.
INT telProdNpMonInterfErrorsKind	1.3.6.1.4.1.2007.4.1.2.2.2.3.1.2	INTEGER	read-only	Interface type. VI, VI LNI PN, ProNET PRI, PRI IFC CH, CHAOS Net XETH, Experimental EtherNet (3 MBit) ARPA, ARPANet CHP, CHAOS protocol net OSL, Serial line interface Eth, EtherNet (10 MBit) SL, New serial line link X28, X.28 DMR, DEC DMR interface TKR, 802.5 token ring SNK, Sink network (not a real network) X25, X25 network MAN, 802.6 metro area network ATR, Apollo Token Ring FDDI, FDDI SRLY, SDLC relay int IPPN, IP Protocol Net FR, Frame Relay network PPP, PPP network BDG, Bridging pseudo-handler NULL, Null device GWT-NTYPE-B-ISDN, ISDN network B channel SDLC, TRUE SDLC int V25B, V.25bis base network R->N, Teldat Micro-node N->R, Teldat Router GWT-NTYPE-D-ISDN, RDSI D channel 270, 270 Virtual port XOT, XOT TNIP, IP tunnel MPPP, PPP Multilink ATM, ATM Interface SUBATM, ATM subinterface IPSEC, IPSEC BRI, RDSI (2Bs) X25-FAK, X25 fake ISDNB-FAK, ISDNB fake ISDND-FAK, ISDND fake XOT-FAK, XOT fake 270-FAK, 270 fake ASDP, Asynchronous serial device SYNC-SL, Synchronous serial line ASYNC-SL, Asynchronous serial line APTB, Asynchronous serial line DIALROUT, Fake for Dial Routing ARLY, AP alarms relay MEM, PCI Memory card VLAN-ETH, VLAN Ethernet VOIP, VoIP card L2TP, L2TP Virtual Interface BVI, Bridge Virtual Interface SCADA, SCADA Virtual Interface WLAN, Wireless LAN SEPI, Serial Event Printing Interface EIB-Z, Zennio EIB Adapter GPIO, General Parallel I/O AUTO-SL, Synchronous serial line MDMEMU, Modem Emulator Interface FR-SUB, FR subinterface BVI-SUB, BVI subinterface NIC, USB-NIC Device DIP, Generic DirectIP encapsulation IEC101GW, SCADA Virtual Interface GPS, GPS Receiver Interface GPSDATA-SL, GPS DATA Serial line
INT telProdNpMonInterfErrorsOrder	1.3.6.1.4.1.2007.4.1.2.2.2.3.1.3	INTEGER	read-only	This type interface number.
CTR telProdNpMonInterfErrorsIdiscard	1.3.6.1.4.1.2007.4.1.2.2.2.3.1.4	Counter	read-only	Number of discarded packets due to flow control on reception.
CTR telProdNpMonInterfErrorsIerrors	1.3.6.1.4.1.2007.4.1.2.2.2.3.1.5	Counter	read-only	Number of faulty packets found in the link layer.
CTR telProdNpMonInterfErrorsIunkprot	1.3.6.1.4.1.2007.4.1.2.2.2.3.1.6	Counter	read-only	Number of received packets for an unknown protocol.
CTR telProdNpMonInterfErrorsOflowdrop	1.3.6.1.4.1.2007.4.1.2.2.2.3.1.7	Counter	read-only	Number of received packets that have been discarded later due to flow control in transmission.
CTR telProdNpMonInterfErrorsOdiscard	1.3.6.1.4.1.2007.4.1.2.2.2.3.1.8	Counter	read-only	Number of discarded packets due to flow control in transmission.
CTR telProdNpMonInterfErrorsOerrors	1.3.6.1.4.1.2007.4.1.2.2.2.3.1.9	Counter	read-only	Number of output errors, such as attempts to send to a network that has crashed during transmission.
telProdNpMonInterfQueueTable	1.3.6.1.4.1.2007.4.1.2.2.2.4		not-accessible	It shows statistics about input and output queues in the specified interfaces. The provided information consists of: -Total number of assigned buffers -Value of the low layer buffer -Number of active buffers at present in the interface.
telProdNpMonInterfQueueEntry	1.3.6.1.4.1.2007.4.1.2.2.2.4.1		not-accessible	There is an entry per interface.
INT telProdNpMonInterfQueueIfc	1.3.6.1.4.1.2007.4.1.2.2.2.4.1.1	INTEGER	read-only	Interface number. Table index.
INT telProdNpMonInterfQueueKind	1.3.6.1.4.1.2007.4.1.2.2.2.4.1.2	INTEGER	read-only	Interface type. VI, VI LNI PN, ProNET PRI, PRI IFC CH, CHAOS Net XETH, Experimental EtherNet (3 MBit) ARPA, ARPANet CHP, CHAOS protocol net OSL, Serial line interface Eth, EtherNet (10 MBit) SL, New serial line link X28, X.28 DMR, DEC DMR interface TKR, 802.5 token ring SNK, Sink network (not a real network) X25, X25 network MAN, 802.6 metro area network ATR, Apollo Token Ring FDDI, FDDI SRLY, SDLC relay int IPPN, IP Protocol Net FR, Frame Relay network PPP, PPP network BDG, Bridging pseudo-handler NULL, Null device GWT-NTYPE-B-ISDN, ISDN network B channel SDLC, TRUE SDLC int V25B, V.25bis base network R->N, Teldat Micro-node N->R, Teldat Router GWT-NTYPE-D-ISDN, RDSI D channel 270, 270 Virtual port XOT, XOT TNIP, IP tunnel MPPP, PPP Multilink ATM, ATM Interface SUBATM, ATM subinterface IPSEC, IPSEC BRI, RDSI (2Bs) X25-FAK, X25 fake ISDNB-FAK, ISDNB fake ISDND-FAK, ISDND fake XOT-FAK, XOT fake 270-FAK, 270 fake ASDP, Asynchronous serial device SYNC-SL, Synchronous serial line ASYNC-SL, Asynchronous serial line APTB, Asynchronous serial line DIALROUT, Fake for Dial Routing ARLY, AP alarms relay MEM, PCI Memory card VLAN-ETH, VLAN Ethernet VOIP, VoIP card L2TP, L2TP Virtual Interface BVI, Bridge Virtual Interface SCADA, SCADA Virtual Interface WLAN, Wireless LAN SEPI, Serial Event Printing Interface EIB-Z, Zennio EIB Adapter GPIO, General Parallel I/O AUTO-SL, Synchronous serial line MDMEMU, Modem Emulator Interface FR-SUB, FR subinterface BVI-SUB, BVI subinterface NIC, USB-NIC Device DIP, Generic DirectIP encapsulation IEC101GW, SCADA Virtual Interface GPS, GPS Receiver Interface GPSDATA-SL, GPS DATA Serial line
INT telProdNpMonInterfQueueOrder	1.3.6.1.4.1.2007.4.1.2.2.2.4.1.3	INTEGER	read-only	Interface number.
INT telProdNpMonInterfQueueIalloc	1.3.6.1.4.1.2007.4.1.2.2.2.4.1.4	INTEGER	read-only	Number of input buffers assigned to this device.
INT telProdNpMonInterfQueueIlow	1.3.6.1.4.1.2007.4.1.2.2.2.4.1.5	INTEGER	read-only	Water mark for flow control in the device.
INT telProdNpMonInterfQueueIcurrent	1.3.6.1.4.1.2007.4.1.2.2.2.4.1.6	INTEGER	read-only	Current number of input buffers to this device. The value is 0 when the device is disabled.
INT telProdNpMonInterfQueueOfair	1.3.6.1.4.1.2007.4.1.2.2.2.4.1.7	INTEGER	read-only	Fair level for output queue in the device.
INT telProdNpMonInterfQueueOcurrent	1.3.6.1.4.1.2007.4.1.2.2.2.4.1.8	INTEGER	read-only	Number of packets currently waiting for transmission in this device.
telProdNpMonInterfStatsTable	1.3.6.1.4.1.2007.4.1.2.2.2.5		not-accessible	It contains statistics information with reference to the network software, such as network configuration in the router.
telProdNpMonInterfStatsEntry	1.3.6.1.4.1.2007.4.1.2.2.2.5.1		not-accessible	Each register provides information about an interface.
INT telProdNpMonInterfStatsIfc	1.3.6.1.4.1.2007.4.1.2.2.2.5.1.1	INTEGER	read-only	Interface number. Table index.
INT telProdNpMonInterfStatsKind	1.3.6.1.4.1.2007.4.1.2.2.2.5.1.2	INTEGER	read-only	Interface type. VI, VI LNI PN, ProNET PRI, PRI IFC CH, CHAOS Net XETH, Experimental EtherNet (3 MBit) ARPA, ARPANet CHP, CHAOS protocol net OSL, Serial line interface Eth, EtherNet (10 MBit) SL, New serial line link X28, X.28 DMR, DEC DMR interface TKR, 802.5 token ring SNK, Sink network (not a real network) X25, X25 network MAN, 802.6 metro area network ATR, Apollo Token Ring FDDI, FDDI SRLY, SDLC relay int IPPN, IP Protocol Net FR, Frame Relay network PPP, PPP network BDG, Bridging pseudo-handler NULL, Null device GWT-NTYPE-B-ISDN, ISDN network B channel SDLC, TRUE SDLC int V25B, V.25bis base network R->N, Teldat Micro-node N->R, Teldat Router GWT-NTYPE-D-ISDN, RDSI D channel 270, 270 Virtual port XOT, XOT TNIP, IP tunnel MPPP, PPP Multilink ATM, ATM Interface SUBATM, ATM subinterface IPSEC, IPSEC BRI, RDSI (2Bs) X25-FAK, X25 fake ISDNB-FAK, ISDNB fake ISDND-FAK, ISDND fake XOT-FAK, XOT fake 270-FAK, 270 fake ASDP, Asynchronous serial device SYNC-SL, Synchronous serial line ASYNC-SL, Asynchronous serial line APTB, Asynchronous serial line DIALROUT, Fake for Dial Routing ARLY, AP alarms relay MEM, PCI Memory card VLAN-ETH, VLAN Ethernet VOIP, VoIP card L2TP, L2TP Virtual Interface BVI, Bridge Virtual Interface SCADA, SCADA Virtual Interface WLAN, Wireless LAN SEPI, Serial Event Printing Interface EIB-Z, Zennio EIB Adapter GPIO, General Parallel I/O AUTO-SL, Synchronous serial line MDMEMU, Modem Emulator Interface FR-SUB, FR subinterface BVI-SUB, BVI subinterface NIC, USB-NIC Device DIP, Generic DirectIP encapsulation IEC101GW, SCADA Virtual Interface GPS, GPS Receiver Interface GPSDATA-SL, GPS DATA Serial line
INT telProdNpMonInterfStatsOrder	1.3.6.1.4.1.2007.4.1.2.2.2.5.1.3	INTEGER	read-only	Interface number.
CTR telProdNpMonInterfStatsUnipkrcv	1.3.6.1.4.1.2007.4.1.2.2.2.5.1.4	Counter	read-only	Number of no-multicast, no-broadcast packets specificly addressed in the MAC sub-layer.
CTR telProdNpMonInterfStatsMulpkrcv	1.3.6.1.4.1.2007.4.1.2.2.2.5.1.5	Counter	read-only	Number of received multicast or broadcast packets.
CTR telProdNpMonInterfStatsBytesrcv	1.3.6.1.4.1.2007.4.1.2.2.2.5.1.6	Counter	read-only	Number of received bytes in this interface MAC sub-layer.
CTR telProdNpMonInterfStatsPkxt	1.3.6.1.4.1.2007.4.1.2.2.2.5.1.7	Counter	read-only	Number of unicast, multicast, or broadcast transmitted packets.
CTR telProdNpMonInterfStatsBytesxt	1.3.6.1.4.1.2007.4.1.2.2.2.5.1.8	Counter	read-only	Number of transmitted bytes in the MAC sub-layer.

RFC description

Monitors common system information for Teldat NUCLEOX-PLUS equipment including memory, CPU, and interface statistics.

Start monitoring Teldat router/branch CPE networking device (common uptime/diagnostic status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TELDAT-MON-CommonInfo-MIB

What Is TELDAT-MON-CommonInfo-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description