TELDAT-CFG-PROTOCOL-GW104-MIB

All MIBs › TELDAT-CFG-PROTOCOL-GW104-MIB

Category: IP Services and Protocols, SCADA and Industrial Protocols

Description: Manages Teldat router IEC 104 SCADA gateway protocol configuration and TCP connection settings.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TELDAT-CFG-PROTOCOL-GW104-MIB?

TELDAT-CFG-PROTOCOL-GW104-MIB is a Teldat, S.A. proprietary MIB configuring the IEC 60870-5-101/104 protocol gateway (a SCADA/utility telecontrol protocol) on Teldat routers. Its global objects enable the gateway and independently toggle 101/104 operation, set the ASDU common address and its size, cause-of-transmission and information-object-address field sizes, and an origination filter, while a per-agent table configures agent status, name, alarm buffer, and IEC-104 protocol timers (t0-t3), window size (k/w), and local TCP port, alongside a companion table of collector IP addresses. As a configuration/protocol-status MIB it lets an administrator confirm an IEC-104 agent's timers and TCP port match the SCADA master's expectations. It is deployed on Teldat routers acting as IEC 60870-5-101/104 protocol gateways. Engineers can download the TELDAT-CFG-PROTOCOL-GW104-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-CFG-PROTOCOL-GW104-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Teldat routers (IEC 60870-5-101/104 protocol gateway)

Monitoring Examples

An administrator checks telProdNpGW104AgentT0 through T3 against the SCADA master station's configured timeout values to diagnose an IEC-104 gateway session that keeps timing out.

What Can Be Monitored

IEC-104 agent status and protocol timers

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

From RFC1213-MIB

DisplayString

From TELDAT-SW-STRUCTURE-MIB

telProdNpConfProtocol

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
telProdNpConfProtGW104	1.3.6.1.4.1.2007.4.1.1.5.14
telProdNpGW104Global	1.3.6.1.4.1.2007.4.1.1.5.14.1
INT telProdNpGW104GloEnable	1.3.6.1.4.1.2007.4.1.1.5.14.1.1	INTEGER	read-write	Enables Gateway IEC-104/101 operation.
INT telProdNpGW104Glo101_On	1.3.6.1.4.1.2007.4.1.1.5.14.1.2	INTEGER	read-write	Enables IEC-101 operation regardless IEC-104 agents status.
INT telProdNpGW104Glo104_On	1.3.6.1.4.1.2007.4.1.1.5.14.1.3	INTEGER	read-write	Enables IEC-104 agents operation regardless IEC-101 interfaces status.
INT telProdNpGW104GloASDUComAddr	1.3.6.1.4.1.2007.4.1.1.5.14.1.4	INTEGER	read-write	Set ASDU Common Address field value.
INT telProdNpGW104GloASDUComAddrSz	1.3.6.1.4.1.2007.4.1.1.5.14.1.5	INTEGER	read-write	Set ASDU Common Address field size.
INT telProdNpGW104GloCauseTransfSz	1.3.6.1.4.1.2007.4.1.1.5.14.1.6	INTEGER	read-write	Set Cause of Transfer field size.
INT telProdNpGW104GloInfoObjAddrSz	1.3.6.1.4.1.2007.4.1.1.5.14.1.7	INTEGER	read-write	Set Information Object Address field size.
INT telProdNpGW104GloIoa10000	1.3.6.1.4.1.2007.4.1.1.5.14.1.8	INTEGER	read-write	Enable use of IOA 10000.
INT telProdNpGW104GloIoa10007	1.3.6.1.4.1.2007.4.1.1.5.14.1.9	INTEGER	read-write	Enable use of IOA 10007.
INT telProdNpGW104GloOrigFilter	1.3.6.1.4.1.2007.4.1.1.5.14.1.10	INTEGER	read-write	Enable originator address filter for messages received from Control Center .
telProdNpGW104AgentTable	1.3.6.1.4.1.2007.4.1.1.5.14.2		not-accessible	Agents list. The table index is the Agent position.
telProdNpGW104AgentEntry	1.3.6.1.4.1.2007.4.1.1.5.14.2.1		not-accessible	Each entry consists in an IEC-104 Agent. Each entry contains the corresponding IEC-104 agent configuration.
INT telProdNpGW104AgentIndex	1.3.6.1.4.1.2007.4.1.1.5.14.2.1.1	INTEGER	read-only	IEC-104 agent position in the table.
INT telProdNpGW104AgentStatus	1.3.6.1.4.1.2007.4.1.1.5.14.2.1.2	INTEGER	read-write	Table control variable. Set to 1 does nothing. Set to 2 adds a new row (IEC-104 Agent) in the table with default values and returns 2. If it already exists, then it returns error. It must be added immediately after the last index. Set to 3 deletes all table fields corresponding to that Agent, and returns 3. Get returns 1 if the control exists.
STR telProdNpGW104AgentName	1.3.6.1.4.1.2007.4.1.1.5.14.2.1.3	DisplayString	read-write	IEC-104 agent name. Agents names must be different, can not be repeated. If name already exists, then it returns error.
INT telProdNpGW104AgentAlarmBuf	1.3.6.1.4.1.2007.4.1.1.5.14.2.1.4	INTEGER	read-write	Alarm buffer queue length.
INT telProdNpGW104AgentK	1.3.6.1.4.1.2007.4.1.1.5.14.2.1.5	INTEGER	read-write	Max. number of IEC-104 send messages without confirmation.
INT telProdNpGW104AgentLocTcpPort	1.3.6.1.4.1.2007.4.1.1.5.14.2.1.6	INTEGER	read-write	Local TCP port for IEC-104 agent listen.
INT telProdNpGW104AgentT0	1.3.6.1.4.1.2007.4.1.1.5.14.2.1.7	INTEGER	read-write	T0 defined by IEC-104, establish connection timeout. Value indicates in seconds.
INT telProdNpGW104AgentT1	1.3.6.1.4.1.2007.4.1.1.5.14.2.1.8	INTEGER	read-write	T1 defined by IEC-104, SEND or TEST APDU type timeout. Value indicates in seconds.
INT telProdNpGW104AgentT2	1.3.6.1.4.1.2007.4.1.1.5.14.2.1.9	INTEGER	read-write	T2 defined by IEC-104, data message confirmation timeout. Value indicates in seconds.
INT telProdNpGW104AgentT3	1.3.6.1.4.1.2007.4.1.1.5.14.2.1.10	INTEGER	read-write	T3 defined by IEC-104, sending S message timeout on long inactivity periods. Value indicates in seconds.
INT telProdNpGW104AgentW	1.3.6.1.4.1.2007.4.1.1.5.14.2.1.11	INTEGER	read-write	Max. number of IEC-104 received messages confirmed.
STR telProdNpGW104AgentVrf	1.3.6.1.4.1.2007.4.1.1.5.14.2.1.12	DisplayString	read-write	VRF name. If VRF is configured on router, can be asociate in agent. Return error if VRF name don't exist.
telProdNpGW104AgentCcIpTable	1.3.6.1.4.1.2007.4.1.1.5.14.3		not-accessible	Agents list. The table index is the Agent position.
telProdNpGW104AgentCcIpEntry	1.3.6.1.4.1.2007.4.1.1.5.14.3.1		not-accessible	Each entry contains a Control Center IP address for an IEC-104 Agent. First index indicates IEC-104 Agent this value must correspond with same in Agent global parameters table. The second table index indicates the order number of that Control Center IP address inside that Agent.
INT telProdNpGW104AgentCcIpAgIndex	1.3.6.1.4.1.2007.4.1.1.5.14.3.1.1	INTEGER	read-only	IEC-104 agent position index, must be the same that agents table.
INT telProdNpGW104AgentCcIpIndex	1.3.6.1.4.1.2007.4.1.1.5.14.3.1.2	INTEGER	read-only	Control Center IP address position in the table.
INT telProdNpGW104AgentCcIpStatus	1.3.6.1.4.1.2007.4.1.1.5.14.3.1.3	INTEGER	read-write	Table control variable. Set to 1 does nothing. Set to 2 deletes corresponding Control Center IP address to that Agent. Get returns 1 if the control exists. It returns ERROR if agent don't exist, index don't was greated.
IP telProdNpGW104AgentCcIpAddr	1.3.6.1.4.1.2007.4.1.1.5.14.3.1.4	IpAddress	read-write	Control Center IP address for IEC-104 agents filter. Adding a new IP address, that don't exist in the table, create a new row in the table.

RFC description

Configuration management for IEC-104/101 gateway protocol, enabling gateway operation for industrial control system communication.

Start monitoring Teldat router, IEC 60870-5-101/104 protocol gateway (agent timer/TCP-port config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TELDAT-CFG-PROTOCOL-GW104-MIB

What Is TELDAT-CFG-PROTOCOL-GW104-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description