All MIBs › SW3200PRIMGMT-MIB
Category: Switch Management - D-Link
Description:
Manages primary configuration and status objects specific to the D-Link DES-3200 switch series.
Imported Objects
From DLINK-ID-REC-MIB
| dlink-mgmt | |
| dlink-products |
From SNMPv2-SMI
| MODULE-IDENTITY |
What Is SW3200PRIMGMT-MIB?
SW3200PRIMGMT-MIB is a D-Link proprietary MIB holding the primary configuration and status objects for the DES-3200 switch series. As a "primary management" module it typically exposes core system-level data such as device identification (system name, location, contact), management IP addressing, and per-port administrative settings alongside basic hardware status. Monitoring it supports baseline hardware and software health checks on the switch, such as confirming the unit is reachable at its configured management IP, checking per-port administrative/link state, and verifying firmware or version identification. No explicit dependency on other MIBs is indicated in the available source material, though administrators typically load the SW3200PRIMGMT-MIB MIB alongside companion D-Link MIBs (VLAN, bridge, filter) for full switch management. It is deployed specifically on D-Link DES-3200 series managed Ethernet switches in enterprise or SMB network environments.
IPNetwork Monitor allows you to monitor SNMP objects defined in SW3200PRIMGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- system name, location, and contact identification
- management IP address configuration
- per-port administrative and link state
Supported Devices
- D-Link DES-3200 series managed Ethernet switch
Monitoring Examples
The sampled source did not include specific object or table names for this MIB, so no concrete OIDs can be cited here. In general, a "primary management" MIB of this type is polled by an admin to confirm the switch's system identification and management IP are correctly configured, and to check that each port's administrative state matches its intended service state. An unexpected admin-down port or a mismatched management IP address would indicate a configuration drift needing correction.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dlink_Dgs3200SeriesProd | 1.3.6.1.4.1.171.10.101 | |||
| dgs3200_Prod | 1.3.6.1.4.1.171.10.101.1 | |||
| dgs3216_Prod | 1.3.6.1.4.1.171.10.101.2 | |||
| dgs3224_Prod | 1.3.6.1.4.1.171.10.101.3 | |||
| dlink_Dgs3200Series | 1.3.6.1.4.1.171.11.101 | |||
| dgs3200 | 1.3.6.1.4.1.171.11.101.1 | |||
| dgs3216 | 1.3.6.1.4.1.171.11.101.2 | |||
| dgs3224 | 1.3.6.1.4.1.171.11.101.3 |
FAQ
What can be monitored via SW3200PRIMGMT-MIB on a D-Link DES-3200 switch?
It provides core system-level data such as system name/location/contact identification, management IP address configuration, and per-port administrative and link state, supporting baseline hardware and software health checks on the switch.
How would an admin use SW3200PRIMGMT-MIB to confirm a DES-3200 switch's ports are up?
By polling the module's management IP address object to confirm the switch answers at its configured address, then checking its per-port administrative and link state objects to see whether specific ports are enabled and passing traffic.
RFC description
Foundry Networks SW3200 switch primary management MIB; vendor-private objects for managing the SW3200 core switching platform.
Start monitoring D-Link DES-3200 series managed Ethernet switch, legacy Fast Ethernet tier (primary management config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.