All MIBs › SW34XXPRIMGMT-MIB
Category: Switch Management - D-Link
Description:
Manages primary configuration and status objects specific to the D-Link DES-34XX switch series.
Imported Objects
From DLINK-ID-REC-MIB
| dlink-mgmt | |
| dlink-products |
From SNMPv2-SMI
| MODULE-IDENTITY |
What Is SW34XXPRIMGMT-MIB?
SW34XXPRIMGMT-MIB is a D-Link proprietary MIB holding the primary configuration and status objects for the DES-34XX switch series. As a "primary management" module it typically exposes core system-level data such as device identification (system name, location, contact), management IP addressing, and per-port administrative settings alongside basic hardware status. Monitoring it supports baseline hardware and software health checks on the switch, such as confirming the unit is reachable at its configured management IP, checking per-port administrative/link state, and verifying firmware or version identification. No explicit dependency on other MIBs is indicated in the available source material, though it likely complements companion D-Link MIBs (VLAN, bridge, filter) for full switch management. Network management tools typically resolve objects under the SW34XXPRIMGMT-MIB OID tree once compiled, and it is deployed specifically on D-Link DES-34XX series managed Ethernet switches in enterprise or SMB network environments.
IPNetwork Monitor allows you to monitor SNMP objects defined in SW34XXPRIMGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- system name, location, and contact identification
- management IP address configuration
- per-port administrative and link state
Supported Devices
- D-Link DES-34XX series managed Ethernet switch
Monitoring Examples
The sampled source did not include specific object or table names for this MIB, so no concrete OIDs can be cited here. In general, a "primary management" MIB of this type is polled by an admin to confirm the switch's system identification and management IP are correctly configured, and to check that each port's administrative state matches its intended service state. An unexpected admin-down port or a mismatched management IP address would indicate a configuration drift needing correction.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dlink_ProjectXStackIISeriesProd | 1.3.6.1.4.1.171.10.70 | |||
| dlink_Dgs3426 | 1.3.6.1.4.1.171.10.70.1 | |||
| dlink_Dgs3427 | 1.3.6.1.4.1.171.10.70.2 | |||
| dlink_Dgs3450 | 1.3.6.1.4.1.171.10.70.3 | |||
| dlink_Dgs3426p | 1.3.6.1.4.1.171.10.70.7 | |||
| dlink_Dgs3426g | 1.3.6.1.4.1.171.10.70.11 | |||
| dgsProjectXStackIISeriesProd | 1.3.6.1.4.1.171.11.70 | |||
| dgs3426 | 1.3.6.1.4.1.171.11.70.1 | |||
| dgs3427 | 1.3.6.1.4.1.171.11.70.2 | |||
| dgs3450 | 1.3.6.1.4.1.171.11.70.3 | |||
| dgs3426p | 1.3.6.1.4.1.171.11.70.7 | |||
| dgs3426g | 1.3.6.1.4.1.171.11.70.11 |
FAQ
What baseline health checks does SW34XXPRIMGMT-MIB support for D-Link DES-34XX switches?
It exposes core system-identification objects (system name, location, contact) and management IP addressing, letting an operator confirm a switch is reachable and correctly identified in inventory.
Can I use this MIB to check port status on a DES-34XX switch?
Yes, it carries per-port administrative and link state alongside the system-level data, so verifying per-port state is part of the baseline hardware and software health check this MIB supports.
RFC description
D-Link ProjectXStack II series switch MIB defining OID registrations for DGS-3426, DGS-3427, DGS-3450 models.
Start monitoring D-Link DES-34XX xStack series switch, discontinued (primary management config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.