SW-STRCTURE-MIB

All MIBs › SW-STRCTURE-MIB

Category: Switch Management - D-Link

Description: Defines switch structure and hardware topology objects for device component management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SW-STRCTURE-MIB?

SW-STRCTURE-MIB is a vendor-specific MIB intended to define switch structure and hardware topology objects for describing a device's physical component layout, such as chassis, slots, and modules. The module description and sample objects were not present in the available source, so specific object and table names could not be confirmed. Based on its name, such a MIB would typically be used to expose hardware inventory and topology status, potentially including slot occupancy, module type, and component presence, which supports hardware health monitoring of modular switch chassis. It likely depends on general enterprise MIB conventions and possibly the IETF Entity MIB for physical component modeling. It would be deployed on modular chassis-based switches to represent physical hardware structure to management systems. Engineers can download the SW-STRCTURE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SW-STRCTURE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link ES2000 'Golf' series managed switch (Marconi enterprise OID branding)

Monitoring Examples

No object or table names were available in the source data for this MIB, so a concrete monitoring scenario grounded in real identifiers cannot be provided; a full parse of the MIB source would be required to identify its actual chassis/slot/module tables.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
marconi	1.3.6.1.4.1.326
systems	1.3.6.1.4.1.326.2
external	1.3.6.1.4.1.326.2.20
dlink	1.3.6.1.4.1.326.2.20.1
dlinkcommon	1.3.6.1.4.1.326.2.20.1.1
golf	1.3.6.1.4.1.326.2.20.1.2
golfproducts	1.3.6.1.4.1.326.2.20.1.2.1
es2000	1.3.6.1.4.1.326.2.20.1.2.1.3
NTF powerTemperatureWarnning	1.3.6.1.4.1.326.2.20.1.2.1.3.0.5			The trap is sent whenever the power state enter the temperature warnning state.
NTF powerVoltWarnning	1.3.6.1.4.1.326.2.20.1.2.1.3.0.6			The trap is sent whenever the power state enter the volt warnning state.
NTF powerCurrentWarnning	1.3.6.1.4.1.326.2.20.1.2.1.3.0.7			The trap is sent whenever the power state enter the current warnning state.
NTF powerFan1Fail	1.3.6.1.4.1.326.2.20.1.2.1.3.0.8			The trap is sent whenever the power state enter the power fan1 fail state.
NTF powerFan2Fail	1.3.6.1.4.1.326.2.20.1.2.1.3.0.9			The trap is sent whenever the power state enter the power fan2 fail state.
NTF systemFanFail	1.3.6.1.4.1.326.2.20.1.2.1.3.0.10			The trap is sent whenever the power state enter the system fans fail state.
NTF powerRemoved	1.3.6.1.4.1.326.2.20.1.2.1.3.0.11			The trap is sent whenever the power is removed.
NTF powerInserted	1.3.6.1.4.1.326.2.20.1.2.1.3.0.12			The trap is sent whenever the power is inserted.
NTF powerBad	1.3.6.1.4.1.326.2.20.1.2.1.3.0.13			The trap is sent whenever the power is bad.
golfcommon	1.3.6.1.4.1.326.2.20.1.2.2
marconi_mgmt	1.3.6.1.4.1.326.2.20.1.2.2.2
es2000Mgmt	1.3.6.1.4.1.326.2.20.1.2.2.2.28
swStructure	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1
swStructInfo	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.1
OID swStructDevType	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.1.1	OBJECT IDENTIFIER	read-only	Specifies the device type.
STR swStructDevDescr	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.1.2	DisplayString	read-only	Describes the type of the device.
INT swStructDevPortEncodingFactor	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.1.3	INTEGER	read-only	The factor to encode the global port ID from unit ID and the local port ID. This global port ID is required to access the bridge MIB and spanning tree MIB defined by the standard body. This global port ID will provide a unigue port ID for each port across the entire device. Example: supoposed that the encoding factor is 16, then port 2 located on module 2 will be encoded as port 18
OCT swStructDevLedInfo	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.1.4	OCTET STRING	read-only	Provides the LED informations of the cpu slot. bit7 - cpu status(always 1) bit6 - console status(0: console not in used, 1: console in used) bit5 - power status(always 1) bit 4 ~ bit 0 - not used.
INT swStructDevMaxModuleNum	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.1.5	INTEGER	read-only	Maximum number of modules allowed on the unit.
INT swStructDevMaxPortNum	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.1.6	INTEGER	read-only	Maximum number of ports allowed on the unit.
INT swStructDevNumOfPortInUse	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.1.7	INTEGER	read-only	Number of ports which has link being connected to the port.
INT swStructDevOperStatus	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.1.8	INTEGER	read-only	Describes the operation status for the unit.
INT swStructDevLastChange	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.1.9	INTEGER	read-only	Provides the time that the unit is up last time.
swStructModuleTable	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.2		not-accessible	A table that contains information about a module.
swStructModuleEntry	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.2.1		not-accessible	A list of information for a module.
INT swStructModuleUnitIndex	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.2.1.1	INTEGER	read-only	ID of the unit in the device.
INT swStructModuleIndex	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.2.1.2	INTEGER	read-only	ID of the Module in the device.
OID swStructModuleType	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.2.1.3	OBJECT IDENTIFIER	read-only	Type of the module.
STR swStructModuleDescr	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.2.1.4	DisplayString	read-only	Type of the module in displayed string format.
INT swStructModuleVersion	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.2.1.5	INTEGER	read-only	Provides PCB version of the module.
INT swStructModuleMaxPortNum	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.2.1.6	INTEGER	read-only	Maximum number of ports allowed on the module.
INT swStructModuleEncodingOffset	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.2.1.7	INTEGER	read-only	Each module has a offset for encoding the port ID relative to a unit. This encoding will provide a unigue port ID for ports located on the device. Example: Supposed that the offset for module 2 is 16, then port 2 located on module 2 will be encoded as port 18
OCT swStructModuleLEDInfo	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.2.1.8	OCTET STRING	read-only	Gets LED informations on specifiled module.
INT swStructModuleOperStatus	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.2.1.9	INTEGER	read-only	Provides operation status of the module.
INT swStructModuleLastChange	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.2.1.10	INTEGER	read-only	Provides the time that the module is up last time.
swStructPowerTable	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.3		not-accessible	A table that contains information about every power.
swStructPowerEntry	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.3.1		not-accessible	A list of information for each power.
INT swStructPowerIndex	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.3.1.1	INTEGER	read-only	ID of the power supply in the unit.
STR swStructPowerInfo	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.3.1.2	DisplayString	read-only	Displays informations of power. Includes vendor, version and so on.
INT swStructPowerTemperature	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.3.1.3	INTEGER	read-only	Displays temperature value of power by Fahrenheit.
STR swStructPowerVolt	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.3.1.4	DisplayString	read-only	Displays volt value of power by V unit.
INT swStructPowerAmp	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.3.1.5	INTEGER	read-only	Displays amp value of power by A unit.
INT swStructPowerFan1Status	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.3.1.6	INTEGER	read-only	Describes the operation status of the power fan1.
INT swStructPowerFan2Status	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.3.1.7	INTEGER	read-only	Describes the operation status of the power fan2.
INT swStructPowerStatus	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.3.1.8	INTEGER	read-only	Describes the operation status of the power supply.
swStructSystemFanTable	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.4		not-accessible	A table that contains informations about system fans.
swStructSystemFanEntry	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.4.1		not-accessible	A list of informations for each system fan.
INT swStructSystemFanIndex	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.4.1.1	INTEGER	read-only	ID of designed system fans.
INT swStructSystemFanStatus	1.3.6.1.4.1.326.2.20.1.2.2.2.28.1.4.1.2	INTEGER	read-only	Describes the operation status of the system fans.

RFC description

Describes device structure information including type, port encoding factors, and LED status for D-Link switches.

Start monitoring D-Link ES2000 'Golf' series switch (Marconi-branded OEM, device-type/structure identification) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SW-STRCTURE-MIB

What Is SW-STRCTURE-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description