All MIBs › SW3600PRIMGMT-MIB
Category: Switch Management - D-Link
Description: Manages primary configuration and status objects specific to the D-Link DES-3600 switch series.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SW3600PRIMGMT-MIB?
SW3600PRIMGMT-MIB is a D-Link proprietary MIB holding the primary configuration and status objects for the DES-3600 switch series. As a "primary management" module it typically exposes core system-level data such as device identification (system name, location, contact), management IP addressing, and per-port administrative settings alongside basic hardware status. Monitoring it supports baseline hardware and software health checks on the switch, such as confirming the unit is reachable at its configured management IP, checking per-port administrative/link state, and verifying firmware or version identification. No explicit dependency on other MIBs is indicated in the available source material, though it likely complements companion D-Link MIBs (VLAN, bridge, filter) for full switch management. It is deployed specifically on D-Link DES-3600 series managed Ethernet switches in enterprise or SMB network environments. Network engineers evaluating or troubleshooting this functionality can download the SW3600PRIMGMT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SW3600PRIMGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- D-Link DES-3600 series managed Ethernet switch
Monitoring Examples
The sampled source did not include specific object or table names for this MIB, so no concrete OIDs can be cited here. In general, a "primary management" MIB of this type is polled by an admin to confirm the switch's system identification and management IP are correctly configured, and to check that each port's administrative state matches its intended service state. An unexpected admin-down port or a mismatched management IP address would indicate a configuration drift needing correction.
What Can Be Monitored
- system name, location, and contact identification
- management IP address configuration
- per-port administrative and link state
Imported Objects
From DLINK-ID-REC-MIB
| dlink-products |
From SNMPv2-SMI
| MODULE-IDENTITY |
OIDs
RFC description
D-Link DXS-3600 series Ethernet switch primary management MIB for 32-port and 16-port variants.
Start monitoring D-Link DES-3600 series managed Ethernet switch (primary management config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.