STN-VTI-MIB

All MIBs › STN-VTI-MIB

Organization: Spring Tide Networks

Last Updated: 2000-11-27

Category: IPsec / VPN, Spring Tide Networks

Description: Manages Spring Tide Networks virtual tunnel interface configuration, encapsulation, and associated IP parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is STN-VTI-MIB?

STN-VTI-MIB is a Spring Tide Networks (multiservice edge router vendor, later acquired by Lucent) proprietary MIB reporting Virtual Tunnel Interface (VTI) status. Its table, keyed by ifIndex, records the associated virtual-instance (VI) ID, name, policy, state, last-error code, proxy-tunnel serial number, MTU, speed, and Layer 2 multiplexer index. As a configuration/status MIB it lets an administrator confirm a virtual tunnel interface's state and last-error code when diagnosing a tunnel that failed to establish. It is deployed on Spring Tide Networks multiservice edge routers. Engineers can download the STN-VTI-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in STN-VTI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Spring Tide Networks multiservice edge routers

Monitoring Examples

An administrator checks stnVtiState and stnVtiLastError to diagnose a virtual tunnel interface that failed to come up on a Spring Tide Networks edge router.

What Can Be Monitored

virtual tunnel interface state and last error

Imported Objects

From IF-MIB

InterfaceIndex

From SNMPv2-CONF

MODULE-COMPLIANCE

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

From SPRING-TIDE-NETWORKS-SMI

stnNotification

OBJECT-IDENTITY

From STN-ROUTER-MIB

stnRouterVTI

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using stnVtiState OID:

Select a Spring Tide Networks (Lucent) multiservice edge router (Virtual Tunnel Interface status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type stnVtiState into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The current registration state of the VTI. A value of up indicates that the VTI is registered for a tunnel. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'up', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
stnVti	1.3.6.1.4.1.3551.2.7.1.9.1			This MIB module describes managed objects of Spring Tide Networks Virtual Tunnel Interface.
stnVtiObjects	1.3.6.1.4.1.3551.2.7.1.9.1.1
stnVtiTable	1.3.6.1.4.1.3551.2.7.1.9.1.1.1		not-accessible	A list of VTI entries.
stnVtiEntry	1.3.6.1.4.1.3551.2.7.1.9.1.1.1.1		not-accessible	Entry contains information about a particular VTI .
NUM stnVtiIfIndex	1.3.6.1.4.1.3551.2.7.1.9.1.1.1.1.1	InterfaceIndex	read-only	The ifIndex of the VTI Layer 2 Interface.
I32 stnVtiViId	1.3.6.1.4.1.3551.2.7.1.9.1.1.1.1.2	Integer32	read-only	The instance of the configuration record corresponding to this VTI.
STR stnVtiName	1.3.6.1.4.1.3551.2.7.1.9.1.1.1.1.3	DisplayString	read-only	The name configured for this VTI.
STR stnVtiPolicy	1.3.6.1.4.1.3551.2.7.1.9.1.1.1.1.4	DisplayString	read-only	The name of the policy configured for this VTI.
INT stnVtiStateEx	1.3.6.1.4.1.3551.2.7.1.9.1.1.1.1.5	INTEGER	read-only	The current registration state of the VTI. A value of up indicates that the VTI is registered for a tunnel. A value of down indicates that the VTI is waiting for a tunnel to be assigned.
I32 stnVtiLastError	1.3.6.1.4.1.3551.2.7.1.9.1.1.1.1.6	Integer32	read-only	Error code indicating the last error that occured on the interface
I32 stnVtiProxyTunnelSerialNum	1.3.6.1.4.1.3551.2.7.1.9.1.1.1.1.7	Integer32	read-only	Serial number of proxy tunnel associated with this VTI.
I32 stnVtiMTU	1.3.6.1.4.1.3551.2.7.1.9.1.1.1.1.8	Integer32	read-only	The Maximum Transfer Unit of this VTI.
I32 stnVtiSpeed	1.3.6.1.4.1.3551.2.7.1.9.1.1.1.1.9	Integer32	read-only	The interface speed of this VTI.
NUM stnVtiL2MuxIdx	1.3.6.1.4.1.3551.2.7.1.9.1.1.1.1.10	InterfaceIndex	read-only	The interface index of of the L2MUX associated with this VTI.

RFC description

Spring Tide Networks SNMP MIB for Virtual Tunnel Interface (VTI) management. Defines objects for configuring and monitoring virtual tunnel interfaces used in IP services and tunneling applications.

Start monitoring Spring Tide Networks (Lucent) multiservice edge router (Virtual Tunnel Interface status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download STN-VTI-MIB