STN-AAA-MIB

All MIBs › STN-AAA-MIB

Organization: Spring Tide Networks, Inc.

Last Updated: 2000-02-16

Category: Security / Access Control, Spring Tide Networks

Description: Manages Spring Tide Networks AAA service configuration, authentication policy, and session accounting.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is STN-AAA-MIB?

STN-AAA-MIB is a Spring Tide Networks private MIB describing managed objects for Authentication, Authorization, and Accounting (AAA) functionality on Spring Tide's multiservice edge/access platforms. Per its module description it covers AAA service configuration, authentication policy, and session accounting, though no sample objects were captured in this extract. Such AAA MIBs are typically used to monitor the software-level status of subscriber or administrative sessions, including authentication success/failure counts, active accounting sessions, and policy configuration, rather than physical hardware sensors. It commonly parallels concepts found in the standard RADIUS-related MIBs (e.g., RADIUS-AUTH-CLIENT-MIB, RADIUS-ACC-CLIENT-MIB) though implemented as a Spring Tide-proprietary module. It is deployed on Spring Tide Networks multiservice edge platforms in service-provider access networks where centralized subscriber AAA is required. Engineers can download the STN-AAA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in STN-AAA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Spring Tide Networks multiservice edge/access platform

Monitoring Examples

Specific object names were not available in this extract, but based on the module's stated scope an administrator would typically poll AAA session and policy objects to confirm subscriber authentication requests are succeeding and accounting records are being generated correctly, flagging spikes in authentication failures as a possible RADIUS/AAA backend issue.

What Can Be Monitored

authentication success/failure counts
active accounting sessions
AAA policy configuration status

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString

From SPRING-TIDE-NETWORKS-SMI

stnNotification	OBJECT-IDENTITY
stnSystems	OBJECT-IDENTITY

From STN-CHASSIS-MIB

stnEngineCpu	OBJECT-TYPE
stnEngineIndex	OBJECT-TYPE
stnEngineSlot	OBJECT-TYPE

From STN-ROUTER-MIB

stnRouterIndex

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
stnAAA	1.3.6.1.4.1.3551.2.10			The MIB module that describes managed objects of Spring Tide Networks Authentication, Authorization and Accounting functionality
stnAAAObjects	1.3.6.1.4.1.3551.2.10.1
stnAAAConfig	1.3.6.1.4.1.3551.2.10.1.1
stnStackingRuleGroup	1.3.6.1.4.1.3551.2.10.1.1.1
INT stnStackingRuleProtocol	1.3.6.1.4.1.3551.2.10.1.1.1.1	INTEGER	read-only	The rule comparison protocol. Users using this protocol will use the TunnelType and TunnelEndpoint fields
INT stnStackingRuleTunnelType	1.3.6.1.4.1.3551.2.10.1.1.1.2	INTEGER	read-only	The tunneling action the connection will take if the rule comparison protocol is matched.
STR stnStackingRuleTunnelEndPoint	1.3.6.1.4.1.3551.2.10.1.1.1.3	DisplayString	read-only	The name of server endpoint that we will TunnelType to when the rule comparison protocol is matched.
stnEndPointTable	1.3.6.1.4.1.3551.2.10.1.1.2		not-accessible	The Endpoint Table.
stnEndPointEntry	1.3.6.1.4.1.3551.2.10.1.1.2.1		not-accessible	An Server Endpoint entry. An entry in this table corresponds to a single PPP or tunnelling endpoint entity
I32 stnEndPointIndex	1.3.6.1.4.1.3551.2.10.1.1.2.1.1	Integer32	read-only	The configuration instance of this endpoint.
IP stnEndPointIpAddress	1.3.6.1.4.1.3551.2.10.1.1.2.1.2	IpAddress	read-only	IP address of this endpoint.
STR stnEndPointName	1.3.6.1.4.1.3551.2.10.1.1.2.1.3	DisplayString	read-only	The name of server endpoint - if no address is configured then this name will be used for a DNS lookup
OCT stnEndPointPassword	1.3.6.1.4.1.3551.2.10.1.1.2.1.4	OCTET STRING	not-accessible	The challenge password or shared secret for this endpoint.
stnAddressPoolTable	1.3.6.1.4.1.3551.2.10.1.1.3		not-accessible	The Address Pool Table.
stnAddressPoolEntry	1.3.6.1.4.1.3551.2.10.1.1.3.1		not-accessible	An Address Pool entry. An entry in this table corresponds to an address range - all of the entries in this table make up a single address pool for the router
I32 stnAddressPoolIndex	1.3.6.1.4.1.3551.2.10.1.1.3.1.1	Integer32	not-accessible	The priority of each range
IP stnStartIpAddress	1.3.6.1.4.1.3551.2.10.1.1.3.1.2	IpAddress	read-only	The starting IP address of the address range
IP stnEndIpAddress	1.3.6.1.4.1.3551.2.10.1.1.3.1.3	IpAddress	read-only	The ending IP address of the address range
stnNetworkAccessGroup	1.3.6.1.4.1.3551.2.10.1.1.4
BIT stnNetworkAccessUserAuthenType	1.3.6.1.4.1.3551.2.10.1.1.4.1	Bits	read-only	The type of authentication that will be performed for all users using the router - only one user authentication type may be specified at a time
BIT stnNetworkAccessEndPointAuthenType	1.3.6.1.4.1.3551.2.10.1.1.4.2	Bits	read-only	The type of authentication that will be performed for all endpoints using the router - only one endpoint authentication type may be specified at a time
BIT stnNetworkAccessUserAccType	1.3.6.1.4.1.3551.2.10.1.1.4.3	Bits	read-only	The type of accounting that will be performed for all users using the router - more than one user authentication may be specified at a time
BIT stnNetworkAccessEndPointAccType	1.3.6.1.4.1.3551.2.10.1.1.4.4	Bits	read-only	The type of accounting that will be performed for all endpoints using the router - more than one endpoint authentication may be specified at a time
STR stnNetworkAccessDomainName	1.3.6.1.4.1.3551.2.10.1.1.4.5	DisplayString	read-only	The domain name configured for the router - this domain name is used primarily for PPPOE when no router can be determined from the connection type - a username parse will occur attempting to match this domain name with a string located after an '@' sign in the user name ex: john@springtidenetworks.com
INT stnNetworkAccessServiceNameRadiusAttrType	1.3.6.1.4.1.3551.2.10.1.1.4.6	INTEGER	read-only	The type of RADIUS attribute that will be used to carry the service name for a user if applicable
INT stnNetworkAccessLdapAuthorizationUpdateTime	1.3.6.1.4.1.3551.2.10.1.1.4.7	INTEGER	read-only	The amount of time between LDAP updates for this router in seconds
STR stnNetworkAccessLdapUpdateNotification	1.3.6.1.4.1.3551.2.10.1.1.4.8	DisplayString	read-write	LDAP service update notification from network management apps.
INT stnNetworkAccessRealmAttrType	1.3.6.1.4.1.3551.2.10.1.1.4.9	INTEGER	read-only	The type of RADIUS attribute that will be used to specify the realm name for a user if applicable
stnRadiusAccServerTable	1.3.6.1.4.1.3551.2.10.1.1.5		not-accessible	The Radius Accounting Server Table.
stnRadiusAccServerEntry	1.3.6.1.4.1.3551.2.10.1.1.5.1		not-accessible	An Radius Accounting Server entry. An entry in this table corresponds to a single radius accounting server entry
I32 stnRadiusAccServerIndex	1.3.6.1.4.1.3551.2.10.1.1.5.1.1	Integer32	not-accessible	The priority of this accounting server - higher priority servers will attempt to be contacted before lower priority servers - highest priority is 1 - priority indexes must be contiguous
IP stnRadiusAccServerAddress	1.3.6.1.4.1.3551.2.10.1.1.5.1.2	IpAddress	read-only	The IP address of this Radius accounting server.
I32 stnRadiusAccServerDestPort	1.3.6.1.4.1.3551.2.10.1.1.5.1.3	Integer32	read-only	The destination accounting port of this Radius accounting server.
I32 stnRadiusAccServerRetrans	1.3.6.1.4.1.3551.2.10.1.1.5.1.4	Integer32	read-only	The number of times the router will attempt to retransmit to this server if there is no response
I32 stnRadiusAccServerTimeOut	1.3.6.1.4.1.3551.2.10.1.1.5.1.5	Integer32	read-only	The time in seconds to determine the last (re)transmission to this server failed.
OCT stnRadiusAccServerSecret	1.3.6.1.4.1.3551.2.10.1.1.5.1.6	OCTET STRING	not-accessible	The shared secret configured for this Radius accounting server - this secret must also be configured on the RADIUS server itself
STR stnRadiusAccServerName	1.3.6.1.4.1.3551.2.10.1.1.5.1.7	DisplayString	read-only	The name of this Radius accounting server - this name will be used for a DNS lookup if an ip address is not configured
I32 stnRadiusAccServerConfigInstance	1.3.6.1.4.1.3551.2.10.1.1.5.1.8	Integer32	read-only	The configuration instance of this accounting server
stnRadiusAuthServerTable	1.3.6.1.4.1.3551.2.10.1.1.6		not-accessible	The Radius Authentication Server table.
stnRadiusAuthServerEntry	1.3.6.1.4.1.3551.2.10.1.1.6.1		not-accessible	An Radius authentication server entry. An entry in this table corresponds to a single radius authentication server entry
I32 stnRadiusAuthServerIndex	1.3.6.1.4.1.3551.2.10.1.1.6.1.1	Integer32	not-accessible	The priority of this Radius authentication server - highest priority is 1 and higher priority servers will be contacted first - the priorities must be contiguous
IP stnRadiusAuthServerAddress	1.3.6.1.4.1.3551.2.10.1.1.6.1.2	IpAddress	read-only	The IP address of this Radius authentication server.
I32 stnRadiusAuthServerDestPort	1.3.6.1.4.1.3551.2.10.1.1.6.1.3	Integer32	read-only	The destination authenticaton port of this Radius authentication server.
I32 stnRadiusAuthServerRetrans	1.3.6.1.4.1.3551.2.10.1.1.6.1.4	Integer32	read-only	The number of times the router will attempt to retransmit to this radius authentication server
I32 stnRadiusAuthServerTimeOut	1.3.6.1.4.1.3551.2.10.1.1.6.1.5	Integer32	read-only	The time (in seconds) to determine the last (re)transmission to this authentication server failed.
OCT stnRadiusAuthServerSecret	1.3.6.1.4.1.3551.2.10.1.1.6.1.6	OCTET STRING	not-accessible	The shared secret configured for this Radius authentication server - this same secret must be configured on the RADIUS server itself
STR stnRadiusAuthServerName	1.3.6.1.4.1.3551.2.10.1.1.6.1.7	DisplayString	read-only	The name of this Radius authentication server - this name will be used for a DNS lookup if no ip address is configured
I32 stnRadiusAuthServerConfigInstance	1.3.6.1.4.1.3551.2.10.1.1.6.1.8	Integer32	read-only	The configuration instance of this Radius authentication server
stnUserTable	1.3.6.1.4.1.3551.2.10.1.1.7		not-accessible	The User Table.
stnUserEntry	1.3.6.1.4.1.3551.2.10.1.1.7.1		not-accessible	An User entry. An entry in this table corresponds to a single user entry
I32 stnUserIndex	1.3.6.1.4.1.3551.2.10.1.1.7.1.1	Integer32	read-only	The configuration instance of this entry.
STR stnUserName	1.3.6.1.4.1.3551.2.10.1.1.7.1.2	DisplayString	read-only	The user name for this user table entry
OCT stnUserPassword	1.3.6.1.4.1.3551.2.10.1.1.7.1.3	OCTET STRING	not-accessible	The password of this user.
IP stnUserIpAddress	1.3.6.1.4.1.3551.2.10.1.1.7.1.4	IpAddress	read-only	The IP address for user sessions created for this user - 255.255.255.254 picks an address from the address pool table and 0 or 255.255.255.255 allows the user to pick the address.
IP stnUserIpNetMask	1.3.6.1.4.1.3551.2.10.1.1.7.1.5	IpAddress	read-only	The IP sub-network mask for sessions created for this user.
INT stnUserIpRouting	1.3.6.1.4.1.3551.2.10.1.1.7.1.6	INTEGER	read-only	The routing method for this user session.
INT stnUserMTU	1.3.6.1.4.1.3551.2.10.1.1.7.1.7	INTEGER	read-only	The maximum transmission unit used by the framed protocol that this user is configured for.
INT stnUserIpCompression	1.3.6.1.4.1.3551.2.10.1.1.7.1.8	INTEGER	read-only	The compression type for sessions created for this user.
I32 stnUserTimeOut	1.3.6.1.4.1.3551.2.10.1.1.7.1.9	Integer32	read-only	The total amount of time a session should be allowed to stay connected. A value of 0 indicates no timeout
I32 stnUserIdleTime	1.3.6.1.4.1.3551.2.10.1.1.7.1.10	Integer32	read-only	The total amount of time a session should be allowed to stay connected when idle. A value of 0 indicates no timeout
INT stnUserTunnelType	1.3.6.1.4.1.3551.2.10.1.1.7.1.11	INTEGER	read-only	The type of tunnel that should be used for compulsory tunneling - none indicates that this user should be given a strictly PPP session
STR stnUserTunnelServerEndPoint	1.3.6.1.4.1.3551.2.10.1.1.7.1.12	DisplayString	read-only	The name of the tunnel server endpoint to be used when a valid tunnel type is configured
STR stnUserTunnelClientEndPoint	1.3.6.1.4.1.3551.2.10.1.1.7.1.13	DisplayString	read-only	The name of the tunnel client endpoint to be used when a valid tunnel type is configured
STR stnUserAssignedTunnelName	1.3.6.1.4.1.3551.2.10.1.1.7.1.14	DisplayString	read-only	The name of the tunnel initiator to which a session is to be assigned - this variable allows for a grouping mechanism of tunnel sessions
OCT stnUserTunnelPassword	1.3.6.1.4.1.3551.2.10.1.1.7.1.15	OCTET STRING	not-accessible	The shared secret used for this tunnel session when a valid tunnel type is configured
INT stnUserServiceType	1.3.6.1.4.1.3551.2.10.1.1.7.1.16	INTEGER	read-only	The permission level of the user - framed indicates a PPP user and possibly a tunnel user, login indicates a telnet or serial user with read-only allowances, provisioner indicates a telnet or serial user with read-only allowances as well as write privileges for the specific router they are configured on, administrative indicates a telent or serial user with read-only allowances as well as write priveleges for all routers
OCT stnUserIpFilters	1.3.6.1.4.1.3551.2.10.1.1.7.1.17	OCTET STRING	read-only	The list of IP filters that this user entry will be using for its sessions - every four bytes of the octet string contain a 32 bit filter configuration instance
OCT stnUserIpRoutes	1.3.6.1.4.1.3551.2.10.1.1.7.1.18	OCTET STRING	read-only	The list of IP routes for this user - every four bytes of the octet string contain a 32 bit route configuration instance
IP stnUserPrimaryDNSServer	1.3.6.1.4.1.3551.2.10.1.1.7.1.19	IpAddress	read-only	The IP address of the primary DNS server
IP stnUserSecondaryDNSServer	1.3.6.1.4.1.3551.2.10.1.1.7.1.20	IpAddress	read-only	The IP address of the secondary DNS server
IP stnUserPrimaryNBNSServer	1.3.6.1.4.1.3551.2.10.1.1.7.1.21	IpAddress	read-only	The IP address of the primary NBNS server
IP stnUserSecondaryNBNSServer	1.3.6.1.4.1.3551.2.10.1.1.7.1.22	IpAddress	read-only	The IP address of the secondary NBNS server
STR stnUserServiceName	1.3.6.1.4.1.3551.2.10.1.1.7.1.23	DisplayString	read-only	The name indicating the service level for this user - the correlating service and policies for the service may be configured either locally or on an LDAP server
I32 stnUserPhysicalPort	1.3.6.1.4.1.3551.2.10.1.1.7.1.24	Integer32	read-only	The physical port this user is allowed to connect to
I32 stnUserPhysicalSlot	1.3.6.1.4.1.3551.2.10.1.1.7.1.25	Integer32	read-only	The physical slot this user is allowed to connect to
I32 stnUserVirtualPathId	1.3.6.1.4.1.3551.2.10.1.1.7.1.26	Integer32	read-only	The virtual path identifier that this user is allowed to use
I32 stnUserVirtualCircuitId	1.3.6.1.4.1.3551.2.10.1.1.7.1.27	Integer32	read-only	The virtual circuit identifier that this user is allowed to use
I32 stnUserRealmInstance	1.3.6.1.4.1.3551.2.10.1.1.7.1.28	Integer32	read-only	The instance of this users Realm record
stnDefaultPppUserGroup	1.3.6.1.4.1.3551.2.10.1.1.8
IP stnDefaultUserIpAddress	1.3.6.1.4.1.3551.2.10.1.1.8.1	IpAddress	read-only	The IP address for the default PPP user session.
IP stnDefaultUserIpNetMask	1.3.6.1.4.1.3551.2.10.1.1.8.2	IpAddress	read-only	The IP sub-network mask that the PPP default user will use.
INT stnDefaultUserIpRouting	1.3.6.1.4.1.3551.2.10.1.1.8.3	INTEGER	read-only	The routing method for the PPP default user
INT stnDefaultUserMTU	1.3.6.1.4.1.3551.2.10.1.1.8.4	INTEGER	read-only	The maximum transmission unit used by the framed protocol that the PPP default user is configured for.
INT stnDefaultUserIpCompression	1.3.6.1.4.1.3551.2.10.1.1.8.5	INTEGER	read-only	The compression type for the PPP default user
I32 stnDefaultUserTimeOut	1.3.6.1.4.1.3551.2.10.1.1.8.6	Integer32	read-only	The total amount of time the default PPP user should be allowed to stay connected. A value of 0 indicates no timeout
I32 stnDefaultUserIdleTime	1.3.6.1.4.1.3551.2.10.1.1.8.7	Integer32	read-only	The total amount of time the PPP default user should be allowed to stay connected when idle. A value of 0 indicates no timeout
INT stnDefaultUserTunnelType	1.3.6.1.4.1.3551.2.10.1.1.8.8	INTEGER	read-only	The type of tunnel that should be used for compulsory tunneling for the PPP default user - if none is indicated then PPP termination with no tunneling occurs
STR stnDefaultUserTunnelServerEndPoint	1.3.6.1.4.1.3551.2.10.1.1.8.9	DisplayString	read-only	The name of the tunnel server endpoint for the PPP default user to be used if a valid tunnel type is configured for the tunnel type
STR stnDefaultUserTunnelClientEndPoint	1.3.6.1.4.1.3551.2.10.1.1.8.10	DisplayString	read-only	The name of the tunnel client endpoint for the PPP default user to be used if a valid tunnel type is configured for the tunnel type
OCT stnDefaultUserIpFilters	1.3.6.1.4.1.3551.2.10.1.1.8.11	OCTET STRING	read-only	The list of IP filters for the PPP default user - each 32 bits of the octet string specifies a filter file configuration instance
OCT stnDefaultUserIpRoutes	1.3.6.1.4.1.3551.2.10.1.1.8.12	OCTET STRING	read-only	The list of IP routes for the PPP default user - each 32 bits of the octet string specifies a route configuration instance
IP stnDefaultUserPrimaryDNSServer	1.3.6.1.4.1.3551.2.10.1.1.8.13	IpAddress	read-only	The IP address of the primary DNS server
IP stnDefaultUserSecondaryDNSServer	1.3.6.1.4.1.3551.2.10.1.1.8.14	IpAddress	read-only	The IP address of the secondary DNS server
IP stnDefaultUserPrimaryNBNSServer	1.3.6.1.4.1.3551.2.10.1.1.8.15	IpAddress	read-only	The IP address of the primary NBNS server
IP stnDefaultUserSecondaryNBNSServer	1.3.6.1.4.1.3551.2.10.1.1.8.16	IpAddress	read-only	The IP address of the secondary NBNS server
STR stnDefaultUserServiceName	1.3.6.1.4.1.3551.2.10.1.1.8.17	DisplayString	read-only	The name indicating the service level for this default user - the correlating service and policies for the service may be configured either locally or on an LDAP server
stnNoAuthPppUserGroup	1.3.6.1.4.1.3551.2.10.1.1.9
STR stnNoAuthPppUserName	1.3.6.1.4.1.3551.2.10.1.1.9.1	DisplayString	read-only	The name of this no-authentication PPP user.
OCT stnNoAuthPppUserPassword	1.3.6.1.4.1.3551.2.10.1.1.9.2	OCTET STRING	not-accessible	The password of this no-authentication PPP user.
stnUserIpFilterTable	1.3.6.1.4.1.3551.2.10.1.1.10		not-accessible	The IP Filter table.
stnUserIpFilterEntry	1.3.6.1.4.1.3551.2.10.1.1.10.1		not-accessible	An User IP filter entry. An entry in this table corresponds to a single filter file
I32 stnUserIpFilterIndex	1.3.6.1.4.1.3551.2.10.1.1.10.1.1	Integer32	read-only	The configuration instance of this IP filter file
STR stnUserIpFilterName	1.3.6.1.4.1.3551.2.10.1.1.10.1.2	DisplayString	read-only	The name of this IP filter file.
OCT stnUserIpFilterRules	1.3.6.1.4.1.3551.2.10.1.1.10.1.3	OCTET STRING	read-only	A list of the IP Filter Rules that this filter file contains - each 32 bits of the octet string contains a filter rule configuration instance
stnUserIpFilterRuleTable	1.3.6.1.4.1.3551.2.10.1.1.11		not-accessible	The User IP filte rule table.
stnUserIpFilterRuleEntry	1.3.6.1.4.1.3551.2.10.1.1.11.1		not-accessible	An User IP filter rule entry. An entry in this table corresponds to a single IP filter rule entry
I32 stnUserIpFilterRuleIndex	1.3.6.1.4.1.3551.2.10.1.1.11.1.1	Integer32	read-only	The configuration instance of this IP filter rule
IP stnUserIpFilterRuleSrcAddress	1.3.6.1.4.1.3551.2.10.1.1.11.1.2	IpAddress	read-only	The filter rule comparison source IP address.
IP stnUserIpFilterRuleSrcNetMask	1.3.6.1.4.1.3551.2.10.1.1.11.1.3	IpAddress	read-only	The filter rule comparison source IP sub-network mask.
I32 stnUserIpFilterRuleSrcPort	1.3.6.1.4.1.3551.2.10.1.1.11.1.4	Integer32	read-only	The filter rule comparison source port.
IP stnUserIpFilterRuleDestAddress	1.3.6.1.4.1.3551.2.10.1.1.11.1.5	IpAddress	read-only	The filter rule comparison destination IP address.
IP stnUserIpFilterRuleDestNetMask	1.3.6.1.4.1.3551.2.10.1.1.11.1.6	IpAddress	read-only	The filter rule comparison destination IP sub-network mask.
I32 stnUserIpFilterRuleDestPort	1.3.6.1.4.1.3551.2.10.1.1.11.1.7	Integer32	read-only	The filter rule comparison destination port.
I32 stnUserIpFilterRuleProtocol	1.3.6.1.4.1.3551.2.10.1.1.11.1.8	Integer32	read-only	The filter rule comparison protocol.
I32 stnUserIpFilterRuleAction	1.3.6.1.4.1.3551.2.10.1.1.11.1.9	Integer32	read-only	The action we should take if a match occurs to the specified comparisons above
STR stnUserIpFilterRuleEndPoint	1.3.6.1.4.1.3551.2.10.1.1.11.1.10	DisplayString	read-only	The name of endpoint we will use for the action if appropriate
stnUserIpRouteTable	1.3.6.1.4.1.3551.2.10.1.1.12		not-accessible	The User IP route table.
stnUserIpRouteEntry	1.3.6.1.4.1.3551.2.10.1.1.12.1		not-accessible	An User IP route entry. An entry in this table may correspond to a single IP route
I32 stnUserIpRouteIndex	1.3.6.1.4.1.3551.2.10.1.1.12.1.1	Integer32	read-only	The configuration instance of this IP route.
IP stnUserIpRouteDestAddress	1.3.6.1.4.1.3551.2.10.1.1.12.1.2	IpAddress	read-only	The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route.
IP stnUserIpRouteDestNetMask	1.3.6.1.4.1.3551.2.10.1.1.12.1.3	IpAddress	read-only	The IP sub-network mask associated with the destination IP address of this entry.
IP stnUserIpRouteDestGateway	1.3.6.1.4.1.3551.2.10.1.1.12.1.4	IpAddress	read-only	The gateway for packets with a matching destination address and netmask.
I32 stnUserIpRouteMetric	1.3.6.1.4.1.3551.2.10.1.1.12.1.5	Integer32	read-only	The number of hops to the gateway.
stnLDAPAuthorServerTable	1.3.6.1.4.1.3551.2.10.1.1.13		not-accessible	The (conceptual) table listing the LDAP authorization servers with which the client shares a secret.
stnLDAPAuthorServerEntry	1.3.6.1.4.1.3551.2.10.1.1.13.1		not-accessible	An entry (conceptual row) representing a LDAP authorization server with which the client shares a secret.
I32 stnLDAPAuthorServerIndex	1.3.6.1.4.1.3551.2.10.1.1.13.1.1	Integer32	not-accessible	A number uniquely identifying each LDAP Authorization server with which this client communicates.
IP stnLDAPAuthorServerAddress	1.3.6.1.4.1.3551.2.10.1.1.13.1.2	IpAddress	read-only	The IP address of the LDAP authorization server referred to in this table entry.
I32 stnLDAPAuthorClientServerPortNumber	1.3.6.1.4.1.3551.2.10.1.1.13.1.3	Integer32	read-only	The UDP port the client is using to send requests to this server.
I32 stnLDAPAuthorServerTimeout	1.3.6.1.4.1.3551.2.10.1.1.13.1.4	Integer32	read-only	Amount of time in seconds the STN 5000 will wait for a reply before considering the transmission a failure
I32 stnLDAPAuthorConnectionEstablishTimeout	1.3.6.1.4.1.3551.2.10.1.1.13.1.5	Integer32	read-only	Amount of time in seconds the STN 5000 will wait to reestablish a failed connection
OCT stnLDAPAuthorBindPassword	1.3.6.1.4.1.3551.2.10.1.1.13.1.6	OCTET STRING	read-only	This is the password used in conjunction with the stnLDAPAuthorBindUserId to authenticate to the server during a bind
STR stnLDAPAuthorRootDirectory	1.3.6.1.4.1.3551.2.10.1.1.13.1.7	DisplayString	read-only	The path from the topmost (root) directory of the LDAP server to the directory that contains the stnLDAPAuthorServiceDirectoryName
STR stnLDAPAuthorServiceDirectoryName	1.3.6.1.4.1.3551.2.10.1.1.13.1.8	DisplayString	read-only	The domain name component of a company or organization. This is the directory where the services and policies directories are located
STR stnLDAPAuthorBindOrganizationalUnit	1.3.6.1.4.1.3551.2.10.1.1.13.1.9	DisplayString	read-only	Directory where the stnLDAPAuthorBindUserId user entry can be found
STR stnLDAPAuthorBindUserId	1.3.6.1.4.1.3551.2.10.1.1.13.1.10	DisplayString	read-only	The user id to be used in conjunction with the stnLDAPAuthorBindPassword to authenticate to the server during bind process
STR stnLDAPAuthorServerName	1.3.6.1.4.1.3551.2.10.1.1.13.1.11	DisplayString	read-only	The name of this LDAP authorization server - this name will be used for a DNS lookup if no ip address is configured
I32 stnLDAPAuthorServerConfigInstance	1.3.6.1.4.1.3551.2.10.1.1.13.1.12	Integer32	read-only	The configuration instance of this LDAP authorization server
stnRealmTable	1.3.6.1.4.1.3551.2.10.1.1.14		not-accessible	The Realm Table.
stnRealmEntry	1.3.6.1.4.1.3551.2.10.1.1.14.1		not-accessible	A Realm entry. An entry in this table corresponds to a single realm entry
I32 stnRealmIndex	1.3.6.1.4.1.3551.2.10.1.1.14.1.1	Integer32	read-only	The configuration instance of this realm entry.
STR stnRealmName	1.3.6.1.4.1.3551.2.10.1.1.14.1.2	DisplayString	read-only	The realm name for this realm table entry
I32 stnRealmAddrPoolInstance	1.3.6.1.4.1.3551.2.10.1.1.14.1.3	Integer32	read-only	The address pool instance associated with this realm
IP stnRealmForcedNextHop	1.3.6.1.4.1.3551.2.10.1.1.14.1.4	IpAddress	read-only	The IP address of the next hop router that all IP traffic received on this interface will be sent to
stnRealmRADIUSAuthenTable	1.3.6.1.4.1.3551.2.10.1.1.15		not-accessible	The Realm RADIUS Authen Servers Table.
stnRealmRADIUSAuthenEntry	1.3.6.1.4.1.3551.2.10.1.1.15.1		not-accessible	A Realm RADIUS Authentication server entry. An entry in this table corresponds to a single Realm authentication server entry
I32 stnRealmRADIUSAuthenServerIndex	1.3.6.1.4.1.3551.2.10.1.1.15.1.1	Integer32	read-only	The RADIUS authentication server array index.
I32 stnRealmRADIUSAuthenServerInstance	1.3.6.1.4.1.3551.2.10.1.1.15.1.2	Integer32	read-only	The instance of a RADIUS authentication server
IP stnRealmRADIUSAuthenServerAddress	1.3.6.1.4.1.3551.2.10.1.1.15.1.3	IpAddress	read-only	The IP address of this Radius authentication server.
I32 stnRealmRADIUSAuthenServerDestPort	1.3.6.1.4.1.3551.2.10.1.1.15.1.4	Integer32	read-only	The destination authenticaton port of this Radius authentication server.
I32 stnRealmRADIUSAuthenServerRetrans	1.3.6.1.4.1.3551.2.10.1.1.15.1.5	Integer32	read-only	The number of times the router will attempt to retransmit to this radius authentication server
I32 stnRealmRADIUSAuthenServerTimeOut	1.3.6.1.4.1.3551.2.10.1.1.15.1.6	Integer32	read-only	The time (in seconds) to determine the last (re)transmission to this authentication server failed.
OCT stnRealmRADIUSAuthenServerSecret	1.3.6.1.4.1.3551.2.10.1.1.15.1.7	OCTET STRING	not-accessible	The shared secret configured for this Radius authentication server - this same secret must be configured on the RADIUS server itself
STR stnRealmRADIUSAuthenServerName	1.3.6.1.4.1.3551.2.10.1.1.15.1.8	DisplayString	read-only	The name of this Radius authentication server - this name will be used for a DNS lookup if no ip address is configured
stnNamedAddressPoolTable	1.3.6.1.4.1.3551.2.10.1.1.16		not-accessible	The Named Address Pool Table.
stnNamedAddressPoolEntry	1.3.6.1.4.1.3551.2.10.1.1.16.1		not-accessible	A named address pool entry. An entry in this table corresponds to a single named address pool
I32 stnNamedAddressPoolIndex	1.3.6.1.4.1.3551.2.10.1.1.16.1.1	Integer32	read-only	The configuration instance of this Named Address Pool entry.
STR stnNamedAddressPoolName	1.3.6.1.4.1.3551.2.10.1.1.16.1.2	DisplayString	read-only	The name of this named address pool table entry
stnNamedAddressPoolRangeTable	1.3.6.1.4.1.3551.2.10.1.1.17		not-accessible	The Named Address Pool Address Range Table.
stnNamedAddressPoolRangeEntry	1.3.6.1.4.1.3551.2.10.1.1.17.1		not-accessible	A named address pool range entry. An entry in this table corresponds to a single address range
I32 stnNamedAddressPoolRangeIndex	1.3.6.1.4.1.3551.2.10.1.1.17.1.1	Integer32	read-only	The index into the array of address ranges
IP stnNamedAddressPoolStartIpAddress	1.3.6.1.4.1.3551.2.10.1.1.17.1.2	IpAddress	read-only	The starting IP address of the address range
IP stnNamedAddressPoolEndIpAddress	1.3.6.1.4.1.3551.2.10.1.1.17.1.3	IpAddress	read-only	The ending IP address of the address range
stnAAAStats	1.3.6.1.4.1.3551.2.10.1.2
stnAAAMibConformance	1.3.6.1.4.1.3551.2.10.2
stnAAATrapVars	1.3.6.1.4.1.3551.2.10.3
I32 stnNotificationRadiusAuthServerIndex	1.3.6.1.4.1.3551.2.10.3.1	Integer32	read-only	The priority of this Radius authentication server - highest priority is 1 and higher priority servers will be contacted first - the priorities must be contiguous
I32 stnNotificationRadiusAccServerIndex	1.3.6.1.4.1.3551.2.10.3.2	Integer32	read-only	The priority of this accounting server - higher priority servers will attempt to be contacted before lower priority servers - highest priority is 1 - priority indexes must be contiguous
NTF stnMaxUserSessionLimitExceeded	1.3.6.1.4.1.3551.2.100.0.20			A stnMaxUserSessionLimitExceeded trap signifies that the agent entity has detected that the maximum number of sessions has been exceeded on one of its engines. The generation of this trap can be controlled by the AAATraps configuration object.
NTF stnRadiusAuthenMismatch	1.3.6.1.4.1.3551.2.100.0.21			A stnRadiusAuthenMismatch trap signifies that the agent entity has detected that the a authentication failure (security breach or retransmission parameter) has been detected on one of its routers. The generation of this trap can be controlled by the AAATraps configuration object.
NTF stnPrimaryBillingServerFailure	1.3.6.1.4.1.3551.2.100.0.22			A stnPrimaryBillingServerFailure trap signifies that the agent entity has detected that a problem has occurred with the primary billing server and is switching to a secondary billing server. The generation of this trap can be controlled by the AAATraps configuration object.
NTF stnNoAddressesAvailable	1.3.6.1.4.1.3551.2.100.0.23			A stnNoAddressesAvailable trap signifies that the agent entity has detected that no addresses are available on the indicated router. The generation of this trap can be controlled by the AAATraps configuration object.

RFC description

Vendor-private MIB for managing AAA (Authentication, Authorization, Accounting) services and policy enforcement on STN (Secure Telecom Network) devices.

Start monitoring Spring Tide Networks (Lucent) multiservice edge/access platform (AAA subsystem) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download STN-AAA-MIB

What Is STN-AAA-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description