All MIBs › SPIDCOM-TRAPS
Organization: SPiDCOM
Last Updated: 2002-07-15
Category: SPiDCOM, Traps / Notifications
Description:
Defines trap definitions for SPiDCOM powerline networking device fault and operational events.
Imported Objects
From SNMPv2-CONF
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| TEXTUAL-CONVENTION |
From SPIDCOM-ALARM-MIB
| ItuAlarmProbableCause | |
| ItuAlarmType | |
| neAlarmActivePhoto | OBJECT-TYPE |
| specificSpidcomTrap | OBJECT-IDENTITY |
What Is SPIDCOM-TRAPS?
SPIDCOM-TRAPS is a vendor-specific MIB from SPiDCOM Technologies defining SNMP trap/notification structures for powerline networking (HomePlug/PLC) devices, focused on alarm monitoring rather than polled tables. It defines the MIB tree used to manage alarm notifications for fault and operational events on SPiDCOM powerline communication hardware. Its monitoring value is oriented toward fault/event status: it lets a management station receive asynchronous alerts about device conditions rather than requiring continuous polling of counters. No sample objects were available confirming specific trap variable names, so exact alarm fields cannot be listed with confidence. It is deployed on SPiDCOM powerline network adapters/bridges used in home or building powerline networking (PLC) products. Engineers can download the SPIDCOM-TRAPS file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SPIDCOM-TRAPS. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- SPiDCOM powerline networking adapter/bridge
Monitoring Examples
No runtime sample objects were provided for this MIB beyond its stated purpose as an alarm/trap tree, so a concrete polled-object monitoring scenario cannot be responsibly constructed; in practice a management station would subscribe to these traps to be alerted of powerline link faults or operational state changes as they occur rather than polling for them.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| trapsDefinition | 1.3.6.1.4.1.22764.4.1 | Definition of the MIB tree structure to manage the Alarm Monitoring. | ||
| NTF deviceDown | 1.3.6.1.4.1.22764.4.1.1 | This trap is sent when a the connection with a distant node is down | ||
| NTF deviceUp | 1.3.6.1.4.1.22764.4.1.2 | This trap is sent when a the connection with a distant node is down | ||
| NTF maxAttenuation | 1.3.6.1.4.1.22764.4.1.3 | This trap is sent when some value is reached for attenuation | ||
| NTF maxNoise | 1.3.6.1.4.1.22764.4.1.4 | This trap is sent when some value is reached for noise | ||
| linkUpDownNotificationsGroup | 1.3.6.1.4.1.22764.4.1.11 | The notifications which indicates connection with a distant node is up/down | ||
| maxAttenuationNotificationsGroup | 1.3.6.1.4.1.22764.4.1.12 | The notification which indicates attenuation change | ||
| maxNoiseNotificationsGroup | 1.3.6.1.4.1.22764.4.1.13 | The notification which indicates noise change |
RFC description
Defines alarm monitoring traps for SPiDCOM devices including device status and signal attenuation.
Start monitoring SPiDCOM powerline networking adapter/bridge (alarm/fault event trap notifications) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.