SONOMASYSTEMS-SONOMA-IPAPPS-MIB

All MIBs › SONOMASYSTEMS-SONOMA-IPAPPS-MIB

Category: SonomaSystems ATM WAN Management

Description: Manages SonomaSystems Sonoma IP application services configuration and operational status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SONOMASYSTEMS-SONOMA-IPAPPS-MIB?

SONOMASYSTEMS-SONOMA-IPAPPS-MIB is a vendor-specific MIB from Sonoma Systems for its Sonoma IP applications platform, intended to manage configuration and operational status of IP-based application services running on the device. Without a populated module description or sample objects in this batch, the exact object set cannot be confirmed, but based on the module name it likely covers service-level configuration (which IP applications/services are enabled) and their operational/administrative status. As an IP applications MIB it would be relevant to software/service status monitoring - confirming whether specific IP application services are running versus stopped or failed - rather than physical chassis hardware. No explicit MIB dependency is indicated by the available data, though it likely builds on standard SNMPv2-SMI conventions and possibly IF-MIB for any network-facing service bindings. It would be deployed on Sonoma Systems IP application platform devices, likely in service-provider or enterprise IP services environments. Engineers can download the SONOMASYSTEMS-SONOMA-IPAPPS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SONOMASYSTEMS-SONOMA-IPAPPS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Sonoma Systems IP applications platform device

Monitoring Examples

No sample objects were provided for this MIB, so a concrete real-object monitoring example cannot be constructed; based on the short description alone, an operator would be expected to poll per-service status/configuration objects to confirm each IP application is running as configured, but the actual object names should be verified against the source MIB before building monitoring.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

From SONOMASYSTEMS-SONOMA-MIB

sonomaApplications

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
ipApplications	1.3.6.1.4.1.2926.25.8.1
bootpGroup	1.3.6.1.4.1.2926.25.8.1.1
IP tftpFileServerIpAddress	1.3.6.1.4.1.2926.25.8.1.1.1	IpAddress	read-write	The IP Address of the file server to use for image and parameter file downloads and uploads.
STR tftpFileName	1.3.6.1.4.1.2926.25.8.1.1.2	DisplayString	read-write	The path and name of the file to be uploaded or downloaded. This string is 128 charachters long, any longer causes problems fro Windown NT or Windows 95. This length is recommended in RFC 1542.
INT tftpImageNumber	1.3.6.1.4.1.2926.25.8.1.1.3	INTEGER	read-write	The Image number (1 - 8) for the operational image file to be downloaded to. In the case of BOOTP the image will be stored in the BOOTP/ directory in flash
INT tftpFileAction	1.3.6.1.4.1.2926.25.8.1.1.4	INTEGER	read-write	This object is used to initiate file transfer between this unit and the file server identified by tftpFileServerIpAddress. A download indicates that the file transfer is from the file server (down) to the device. An upload indicates a file transfer from the device (up) to the server. This object can be used to initiate either image or parameter file downloads and a parameter file upload. There is no image file upload feature. An image file can be downloaded via either a BootP request (where the image filename and the BootP server's IP Address is unknown) or via a TFTP request where the user has configured the tftpFileName object with the path and name of the file. BootP cannot be used to download or upload a parameter file. An attempt to set this object to one of the following values: startTFTPImageDownload, startTFTPParameterDownload or startTFTPParameterUpload, will fail if either the tftpFileName or tftpFileServerIpAddress object has not bee configured. The tftpFileName and tftpFileServerIpAddress objects are ignored for BootP requests. A value of noAction is always returned to a GetRequest. Seting this object with a value of noAction has no effect. The startPrimaryImageTFTPDownload is used to initiate the download of the primary boot image. This image is only downloaded when there is a new revision of the basic boot mechanism or changes to the flash or CMOS sub-systems.
INT tftpFileTransferStatus	1.3.6.1.4.1.2926.25.8.1.1.5	INTEGER	read-only	This is the current status of the file transfer process.
pingGroup	1.3.6.1.4.1.2926.25.8.1.2
IP pingIpAddress	1.3.6.1.4.1.2926.25.8.1.2.1	IpAddress	read-write	The IP Address to Ping
INT pingTimeout	1.3.6.1.4.1.2926.25.8.1.2.2	INTEGER	read-write	This is the timeout, in seconds, for a ping.
INT pingRetries	1.3.6.1.4.1.2926.25.8.1.2.3	INTEGER	read-write	This value indicates the number of times, to ping. A value of 1 is the default and insicates that the unit will send one pingp. 0 means no action.
STR pingStatus	1.3.6.1.4.1.2926.25.8.1.2.4	DisplayString	read-only	A text string which indicates the result or status of the last ping which the unit sent.
INT pingAction	1.3.6.1.4.1.2926.25.8.1.2.5	INTEGER	read-write	Indicates whether to stop or start a ping. This always returns the value noAction to a Get Request.

RFC description

Sonoma IP applications MIB for TFTP and BOOTP file transfer configuration used for image and parameter file downloads.

Start monitoring Sonoma Systems IP applications platform device (IP service enablement/status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SONOMASYSTEMS-SONOMA-IPAPPS-MIB

What Is SONOMASYSTEMS-SONOMA-IPAPPS-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description