SN-OSM-PRIV-MIB

All MIBs › SN-OSM-PRIV-MIB

Category: Generic / Unclassified

Description: Defines private management objects for SN OSM (Optical Switch Module) configuration and status monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SN-OSM-PRIV-MIB?

SN-OSM-PRIV-MIB is a private MIB, likely associated with Siemens-related network products (given the simaticNet OID reference among its sample objects), defining objects for firmware/configuration download management and event logging on an Optical Switch Module (OSM) style device. Its exposed objects center on a TFTP-based download workflow -- target server hostname, file name, control/status/error objects, and download progress tracking -- plus a non-volatile event log with configurable maximum entry count and its own file/control objects for retrieval. This is a software-status monitoring MIB in the sense of tracking firmware/configuration deployment operations: an administrator can confirm whether a TFTP download completed successfully, detect a download error, and retrieve the module's persistent event log for post-incident analysis. It depends on standard TFTP file-transfer conventions layered into the vendor's private enterprise tree (with related product branches like adProductMibs and simaticNet visible in the OID hierarchy). It would be deployed on optical switch modules or related network elements where firmware/config updates and diagnostic logging are managed remotely via SNMP-triggered TFTP transfers. Engineers can download the SN-OSM-PRIV-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SN-OSM-PRIV-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Siemens-related optical switch module (OSM)-style network equipment

Monitoring Examples

An operator would set snDownloadParamsTftpServerHostName and snDownloadParamsFile, then trigger snDownloadParamsControl and poll snDownloadParamsStatus and snDownloadParamsError to confirm a firmware or config download completed without error; a non-zero snDownloadParamsError or a status stuck in an in-progress state would indicate a failed TFTP transfer, perhaps due to an unreachable server or file-not-found condition. Separately, checking snNvLogMaxEntries against the actual event log retrieved via snDownloadEventLogTableFile/snDownloadEventLogTableControl would confirm whether the device's event log is nearing capacity and due for rotation or offload.

What Can Be Monitored

TFTP download status/error
download progress/control state
configured download file/server
non-volatile event log size and retrieval control

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
IpAddress
TimeTicks
enterprises
internet

From RFC1213-MIB

DisplayString
ifIndex

OIDs

OID symbolic	OID numeric	Type	Access	Description
ad	1.3.6.1.4.1.4196
adProductMibs	1.3.6.1.4.1.4196.1
simaticNet	1.3.6.1.4.1.4196.1.1
iHub	1.3.6.1.4.1.4196.1.1.1
iSwitch	1.3.6.1.4.1.4196.1.1.2
snOsmItp62	1.3.6.1.4.1.4196.1.1.2.1
snOsmItp53	1.3.6.1.4.1.4196.1.1.2.2
snOsmItpLd62	1.3.6.1.4.1.4196.1.1.2.3
snEsmItp80	1.3.6.1.4.1.4196.1.1.2.4
snOsmTp62	1.3.6.1.4.1.4196.1.1.2.5
snEsmTp80	1.3.6.1.4.1.4196.1.1.2.6
snOsmBC08	1.3.6.1.4.1.4196.1.1.2.7
snOsmTpLd62	1.3.6.1.4.1.4196.1.1.2.8
snOsmTp22	1.3.6.1.4.1.4196.1.1.2.9
snEsmTp40	1.3.6.1.4.1.4196.1.1.2.10
snOsmTp62_Advanced	1.3.6.1.4.1.4196.1.1.2.11
snEsmItp80_Advanced	1.3.6.1.4.1.4196.1.1.2.12
snEsmTp80_Advanced	1.3.6.1.4.1.4196.1.1.2.13
snOsmItpLd62_Advanced	1.3.6.1.4.1.4196.1.1.2.14
snOsmItp62_Advanced	1.3.6.1.4.1.4196.1.1.2.15
snOsmItp53_Advanced	1.3.6.1.4.1.4196.1.1.2.16
snOsmTp53	1.3.6.1.4.1.4196.1.1.2.17
iSwitchMib	1.3.6.1.4.1.4196.1.1.2.100
snCommon	1.3.6.1.4.1.4196.1.1.2.100.1
snDownload	1.3.6.1.4.1.4196.1.1.2.100.1.5
snDownloadParams	1.3.6.1.4.1.4196.1.1.2.100.1.5.1
STR snDownloadParamsTftpServerHostName	1.3.6.1.4.1.4196.1.1.2.100.1.5.1.2	DisplayString	read-write	IP address of the TFTP server (x.y.z.w).
STR snDownloadParamsFile	1.3.6.1.4.1.4196.1.1.2.100.1.5.1.3	DisplayString	read-write	Full path name of file to be loaded from the TFTP server host. Note that the file name must have the appropriate syntax for the TFTP server host. E.g., if the TFTP server host is a UNIX machine, the full file name might be /tftp/name.lad, or if the TFTP server host is a Windows machine, the full file name might be C:\tftp\name.lad.
INT snDownloadParamsControl	1.3.6.1.4.1.4196.1.1.2.100.1.5.1.4	INTEGER	write-only	Setting this object to start-load(2) causes the system to start a downloading process. Setting this object to cancel-load(3) causes the system to abort a downloading process. If ParamsProtocol is the object is not writable. Reading the object, meaning-less(127) is returned.
INT snDownloadParamsStatus	1.3.6.1.4.1.4196.1.1.2.100.1.5.1.5	INTEGER	read-only	The status of the TFTP client.
INT snDownloadNextBlockId	1.3.6.1.4.1.4196.1.1.2.100.1.5.1.6	INTEGER	read-only	The number of the next block ID expected by the TFTP session. Block ID's are numbers starting with 1.
STR snDownloadParamsError	1.3.6.1.4.1.4196.1.1.2.100.1.5.1.7	DisplayString	read-only	The error status of the TFTP client.
INT snDownloadAutoLoad	1.3.6.1.4.1.4196.1.1.2.100.1.5.1.8	INTEGER	read-write	The value enabled(1) will automatically start TFTP when the Operative Program is invalid. The value disabled(2) will inhibit TFTP.
STR snDownloadEventLogTableFile	1.3.6.1.4.1.4196.1.1.2.100.1.5.1.9	DisplayString	read-write	Full path name of file to be saved to the TFTP server host. Note that the file name must have the appropriate syntax for the TFTP server host. E.g., if the TFTP server host is a UNIX machine, the full file name might be /tftp/name.txt, or if the TFTP server host is a Windows machine, the full file name might be C:\tftp\name.txt.
INT snDownloadEventLogTableControl	1.3.6.1.4.1.4196.1.1.2.100.1.5.1.10	INTEGER	write-only	Setting this object to start-save(3) causes the system to start a uploading process. Setting this object to cancel-(4) causes the system to abort a uploading process. If ParamsProtocol is the object is not writable. Reading the object, meaning-less(127) is returned.
STR snDownloadConfigFile	1.3.6.1.4.1.4196.1.1.2.100.1.5.1.11	DisplayString	read-write	Full path name of file to be saved or loaded from the TFTP server host. Note that the file name must have the appropriate syntax for the TFTP server host. E.g., if the TFTP server host is a UNIX machine, the full file name might be /tftp/name.txt, or if the TFTP server host is a Windows machine, the full file name might be C:\tftp\name.txt.
INT snDownloadConfigControl	1.3.6.1.4.1.4196.1.1.2.100.1.5.1.12	INTEGER	write-only	Setting this object to start-load(2) causes the system to start a downloading process. Setting this object to start-save(3) causes the system to start a uploading process. Setting this object to cancel-(4) causes the system to abort the process. If ParamsProtocol is the object is not writable. Reading the object, meaning-less(127) is returned.
snNvLog	1.3.6.1.4.1.4196.1.1.2.100.1.6
INT snNvLogMaxEntries	1.3.6.1.4.1.4196.1.1.2.100.1.6.1	INTEGER	read-write	Maximum number of events that can be kept in Non-Volatile Memory.
INT snNvLogCurrentEntries	1.3.6.1.4.1.4196.1.1.2.100.1.6.2	INTEGER	read-only	Number of events that are currently kept in Non-Volatile Memory.
INT snNvLogNewEntries	1.3.6.1.4.1.4196.1.1.2.100.1.6.3	INTEGER	read-write	Counter for events that are logged in Non-Volatile Memory. This counter starts at 0 after each system start. User can reset this counter at any time by writing 0 to this object.
INT snNvLogClear	1.3.6.1.4.1.4196.1.1.2.100.1.6.4	INTEGER	write-only	Setting this object to clear(1) value, clears the events that are kept in Non-Volatile Memory.
snNvLogTable	1.3.6.1.4.1.4196.1.1.2.100.1.6.5		not-accessible	The table contains the last events that occurred in the system.
snNvLogEntry	1.3.6.1.4.1.4196.1.1.2.100.1.6.5.1		not-accessible	The description of an event that occurred in the system, and was stored in Non-Volatile memory.
INT snNvLogPowerUpCount	1.3.6.1.4.1.4196.1.1.2.100.1.6.5.1.1	INTEGER	read-only	The number of times the system was powered up.
TIK snNvLogTime	1.3.6.1.4.1.4196.1.1.2.100.1.6.5.1.2	TimeTicks	read-only	The sysUpTime of the system when the event occurred.
INT snNvLogSequenceNumber	1.3.6.1.4.1.4196.1.1.2.100.1.6.5.1.3	INTEGER	read-only	The sequence number of the log entry.
STR snNvLogDescr	1.3.6.1.4.1.4196.1.1.2.100.1.6.5.1.4	DisplayString	read-only	ASCII description of the event.
STR snNvLogPositionDescr	1.3.6.1.4.1.4196.1.1.2.100.1.6.6	DisplayString	read-write	Read - find the oid of the entry with spezial number in log table. Write - set the entry number in log table for the read request.
snTrapInfo	1.3.6.1.4.1.4196.1.1.2.100.1.7
INT snSwitchTrapsEnable	1.3.6.1.4.1.4196.1.1.2.100.1.7.1	INTEGER	read-write	Determines whether this device will transmit traps to SNMP management stations. This if this object is set to disable, no traps will be sent. Setting this object to enabled is a necessary, but not a sufficient condition for transmission of traps.
TIK snTrapTimeLastGenerated	1.3.6.1.4.1.4196.1.1.2.100.1.7.5	TimeTicks	read-only	The value of sysUpTime at the time the last trap was generated.
INT snTrapMaxManagers	1.3.6.1.4.1.4196.1.1.2.100.1.7.6	INTEGER	read-only	The maximum number of managers that can be registered for receiving traps.
snTrapTable	1.3.6.1.4.1.4196.1.1.2.100.1.7.7		not-accessible	This table contains information about the managers to which traps should be directed. Setting the snTrapState to inactive(3) removes the corresponding entry from the table.
snTrapEntry	1.3.6.1.4.1.4196.1.1.2.100.1.7.7.1		not-accessible	This object contains runtime information about an individual trap destination.
IP snTrapAddress	1.3.6.1.4.1.4196.1.1.2.100.1.7.7.1.1	IpAddress	read-write	The IP address of the network management entity to which traps should be sent.
INT snTrapState	1.3.6.1.4.1.4196.1.1.2.100.1.7.7.1.3	INTEGER	read-write	The state of this entry in the trap address table. Setting this object to inactive(3) removes the corresponding entry from the table.
INT snTrapIndex	1.3.6.1.4.1.4196.1.1.2.100.1.7.7.1.6	INTEGER	read-only	The Index of Trap Table.
snGen	1.3.6.1.4.1.4196.1.1.2.100.1.8
STR snUserDescription	1.3.6.1.4.1.4196.1.1.2.100.1.8.1	DisplayString	read-write	Extended description of the station including user specific information. This value is used for the email From-field.
STR snHwVersion	1.3.6.1.4.1.4196.1.1.2.100.1.8.2	DisplayString	read-only	The hardware version of the system.
STR snBootStrapVersion	1.3.6.1.4.1.4196.1.1.2.100.1.8.3	DisplayString	read-only	The firmware version of the boot software installed in the system.
STR snSwVersion	1.3.6.1.4.1.4196.1.1.2.100.1.8.4	DisplayString	read-only	The firmware version of the system.
STR snInfoOrderNr	1.3.6.1.4.1.4196.1.1.2.100.1.8.6	DisplayString	read-only	The order number of this product.
INT snSerialPortSpeed	1.3.6.1.4.1.4196.1.1.2.100.1.8.8	INTEGER	read-write	The serial port speed in bits per second.
INT snSwitchTelnetEnable	1.3.6.1.4.1.4196.1.1.2.100.1.8.9	INTEGER	read-write	Enable/Disable TELNET access.
INT snSwitchTelnetTimeOutEnable	1.3.6.1.4.1.4196.1.1.2.100.1.8.10	INTEGER	read-write	Enables or disables the time out for a TELNET session.
INT snSwitchTelnetTimeOut	1.3.6.1.4.1.4196.1.1.2.100.1.8.11	INTEGER	read-write	Time out for the TELNET session. The time could be set in steps of 10 seconds. Minimum value is 60 seconds, maximum value is 600 seconds.
INT snSwitchSNMPEnable	1.3.6.1.4.1.4196.1.1.2.100.1.8.12	INTEGER	read-write	Determines whether this device may be accessed by SNMP management stations.
INT snSysReset	1.3.6.1.4.1.4196.1.1.2.100.1.8.13	INTEGER	write-only	Resets the system. cold-reset(1) is identical to Power-On-Reset or Watchdog-Reset. warm-reset(2) is identical to restart command.
INT snResetPowerUpCount	1.3.6.1.4.1.4196.1.1.2.100.1.8.14	INTEGER	read-only	The number of times the sytem was powered up.
INT snSetFactoryDefs	1.3.6.1.4.1.4196.1.1.2.100.1.8.15	INTEGER	read-write	Restore factory defaults.
INT snResetCounters	1.3.6.1.4.1.4196.1.1.2.100.1.8.16	INTEGER	write-only	Reset all statistic counters.
INT snEraseDataStoreFlash	1.3.6.1.4.1.4196.1.1.2.100.1.8.17	INTEGER	write-only	Erase all configuration data and log table entries. In opposite to reset to factory defaults nothing is saved.
INT snSetMemoryDefs	1.3.6.1.4.1.4196.1.1.2.100.1.8.18	INTEGER	read-write	Restore memory defaults and restart.
IP snEmailSMTPIpAddress	1.3.6.1.4.1.4196.1.1.2.100.1.8.20	IpAddress	read-write	IP address or host name of SMTP server.
INT snEmailSMTPPort	1.3.6.1.4.1.4196.1.1.2.100.1.8.21	INTEGER	read-write	Number of TCP port to which the SMTP server will listen.
INT snEmailEnable	1.3.6.1.4.1.4196.1.1.2.100.1.8.22	INTEGER	read-write	E-mail functionality for sending a message when an event occurred.
STR snEmailAddress	1.3.6.1.4.1.4196.1.1.2.100.1.8.23	DisplayString	read-write	E-mail address to which messages will be sent.
snTcpip	1.3.6.1.4.1.4196.1.1.2.100.1.10
IP snIpAddress	1.3.6.1.4.1.4196.1.1.2.100.1.10.2	IpAddress	read-write	IP address of the agent. Changes become valid after restart.
IP snIpSubnetMask	1.3.6.1.4.1.4196.1.1.2.100.1.10.3	IpAddress	read-write	IP subnet mask of the agent. Changes become valid after restart.
IP snIpDefaultGateway	1.3.6.1.4.1.4196.1.1.2.100.1.10.4	IpAddress	read-write	IP address of the default gateway. Changes become valid after restart.
INT snBootP	1.3.6.1.4.1.4196.1.1.2.100.1.10.5	INTEGER	read-write	Enable/Disable BOOTP. Changes become valid after restart.
MAC snMacAddressBase	1.3.6.1.4.1.4196.1.1.2.100.1.10.10	MacAddress	read-only	MAC address of the switch.
snProductSpecific	1.3.6.1.4.1.4196.1.1.2.100.2
snOsm	1.3.6.1.4.1.4196.1.1.2.100.2.1
NTF snOsmRmActiveState	1.3.6.1.4.1.4196.1.1.2.100.2.1.0.11			Redundancy manager entered active state.
NTF snOsmRmPassiveState	1.3.6.1.4.1.4196.1.1.2.100.2.1.0.12			Redundancy manager entered passive state.
NTF snOsmStandbyActiveState	1.3.6.1.4.1.4196.1.1.2.100.2.1.0.21			Device entered standby active state.
NTF snOsmStandbyPassiveState	1.3.6.1.4.1.4196.1.1.2.100.2.1.0.22			Device entered standby passive state.
NTF snOsmPowerLineDown	1.3.6.1.4.1.4196.1.1.2.100.2.1.0.31			Power down on line .
NTF snOsmPowerLineUp	1.3.6.1.4.1.4196.1.1.2.100.2.1.0.32			Power up on line .
NTF snOsmFault	1.3.6.1.4.1.4196.1.1.2.100.2.1.0.41			Device entered fault state.
NTF snOsmDigitalInput	1.3.6.1.4.1.4196.1.1.2.100.2.1.0.51			Digital Input state changed.
INT snOsmFaultState	1.3.6.1.4.1.4196.1.1.2.100.2.1.2	INTEGER	read-only	Indicates OSM/ESM fault state (state of fault LED/signaling contact).
CTR snOsmSignalledFaults	1.3.6.1.4.1.4196.1.1.2.100.2.1.3	Counter	read-only	Number of signalled faults.
OCT snOsmFaultValue	1.3.6.1.4.1.4196.1.1.2.100.2.1.4	OCTET STRING	read-write	Fault value: 0 = no fault, bit 0 = power, bit 1 = linkdown, bit 2 = internal error, bit 3 = standby, bit 4 = rm, bit 5 = dip switch rm, bit 6 = dip switch standby, bit 7 = ncm, bit 8 = partition port 1, ... bit 15 = partition port 8, bit 16 = observer error, bit 17 = non-recoverable ring error, bit 18 = reset to factory defaults
OCT snOsmDigitalInputChange	1.3.6.1.4.1.4196.1.1.2.100.2.1.5	OCTET STRING	read-only	Digital Input change
INT snOsmDigitalInputState	1.3.6.1.4.1.4196.1.1.2.100.2.1.6	INTEGER	read-only	Digital Input state
INT snOsmRmMode	1.3.6.1.4.1.4196.1.1.2.100.2.1.11	INTEGER	read-only	RM mode.
INT snOsmRmState	1.3.6.1.4.1.4196.1.1.2.100.2.1.12	INTEGER	read-only	RM State.
CTR snOsmRmStateChanges	1.3.6.1.4.1.4196.1.1.2.100.2.1.13	Counter	read-only	Number of changes to RM active state.
INT snOsmRmObserverMode	1.3.6.1.4.1.4196.1.1.2.100.2.1.14	INTEGER	read-write	Reserved for further use.
INT snOsmStandbyMode	1.3.6.1.4.1.4196.1.1.2.100.2.1.21	INTEGER	read-only	Standby Mode.
INT snOsmStandbyState	1.3.6.1.4.1.4196.1.1.2.100.2.1.22	INTEGER	read-only	Standby State.
INT snOsmStandbyCableState	1.3.6.1.4.1.4196.1.1.2.100.2.1.24	INTEGER	read-only	Standby cable state.
CTR snOsmStandbyStateChanges	1.3.6.1.4.1.4196.1.1.2.100.2.1.25	Counter	read-only	Number of changes to standby active state.
MAC snOsmPort7TestMac	1.3.6.1.4.1.4196.1.1.2.100.2.1.31	MacAddress	read-only	MAC (source) address of test telegrams sent on port 7.
MAC snOsmPort8TestMac	1.3.6.1.4.1.4196.1.1.2.100.2.1.32	MacAddress	read-only	MAC (source) address of test telegrams sent on port 8.
MAC snOsmMulticastTestMac	1.3.6.1.4.1.4196.1.1.2.100.2.1.33	MacAddress	read-only	MAC multicast address used for redundancy functions.
MAC snOsmMulticastLinkMac	1.3.6.1.4.1.4196.1.1.2.100.2.1.34	MacAddress	read-only	MAC multicast address used for redundancy functions.
MAC snOsmUnicastLinkMac	1.3.6.1.4.1.4196.1.1.2.100.2.1.35	MacAddress	read-only	MAC unicast address used for redundancy functions.
MAC snOsmMulticastSyncMac	1.3.6.1.4.1.4196.1.1.2.100.2.1.36	MacAddress	read-only	MAC multicast address of time synchronisation packets.
MAC snOsmMulticastFlowControlMac	1.3.6.1.4.1.4196.1.1.2.100.2.1.37	MacAddress	read-only	MAC multicast address of flow control packets.
INT snOsmTestMaxDelay	1.3.6.1.4.1.4196.1.1.2.100.2.1.38	INTEGER	read-only	Measured maximum delay of RM test telegrams.
INT snOsmPowerSupply1State	1.3.6.1.4.1.4196.1.1.2.100.2.1.41	INTEGER	read-only	State of power supply line 1.
INT snOsmPowerSupply2State	1.3.6.1.4.1.4196.1.1.2.100.2.1.42	INTEGER	read-only	State of power supply line 2.
INT snOsmPowerSupply1Mask	1.3.6.1.4.1.4196.1.1.2.100.2.1.43	INTEGER	read-write	Mask of power supply line 1.
INT snOsmPowerSupply2Mask	1.3.6.1.4.1.4196.1.1.2.100.2.1.44	INTEGER	read-write	Mask of power supply line 2.
INT snOsmChangedPowerLine	1.3.6.1.4.1.4196.1.1.2.100.2.1.45	INTEGER	read-write	The power line where the last Power-Up or -Down occurred. User can reset to initial value 0 at any time.
INT snOsmResetCounters	1.3.6.1.4.1.4196.1.1.2.100.2.1.51	INTEGER	write-only	Reset all counters of OSM protocol software.
snOsmPortTable	1.3.6.1.4.1.4196.1.1.2.100.2.1.61		not-accessible	Table containing per-port objects in the form of private extensions of interface objects.
snOsmPortEntry	1.3.6.1.4.1.4196.1.1.2.100.2.1.61.1		not-accessible	Interface entry containing objects at the subnetwork layer and below for a particular interface.
INT snOsmPortIndex	1.3.6.1.4.1.4196.1.1.2.100.2.1.61.1.1	INTEGER	not-accessible	Unique number for each interface. The number is in the range 1 to ifNumber. The number for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
INT snOsmPortFaultMaskState	1.3.6.1.4.1.4196.1.1.2.100.2.1.61.1.2	INTEGER	read-write	Mask for checking link state of the port. If a link of a unmasked (checked) port is down then a fault will be generated.
INT snOsmPortStandbyMaskState	1.3.6.1.4.1.4196.1.1.2.100.2.1.61.1.3	INTEGER	read-write	Mask for standby ports.
INT snOsmPortLockState	1.3.6.1.4.1.4196.1.1.2.100.2.1.61.1.4	INTEGER	read-write	Lock state of the port.
INT snOsmPortPartitionState	1.3.6.1.4.1.4196.1.1.2.100.2.1.61.1.5	INTEGER	read-only	Partition state of the port.
INT snOsmPortBackPressure	1.3.6.1.4.1.4196.1.1.2.100.2.1.61.1.6	INTEGER	read-write	Back pressure mode for the half-duplex port.
snOsmEventTable	1.3.6.1.4.1.4196.1.1.2.100.2.1.62		not-accessible	Event configuration table.
snOsmEventEntry	1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1		not-accessible	Events table rows entries.
INT snOsmEventIndex	1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.1	INTEGER	read-only	Index of columns : E-Mail = 1, Traps = 2, LogTable = 3.
INT snOsmEventColdWarmStart	1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.2	INTEGER	read-write	Enables/Disables cold/warm start notification.
INT snOsmEventLinkChange	1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.3	INTEGER	read-write	Enables/Disables link change notification.
INT snOsmEventAuthenticationFailure	1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.4	INTEGER	read-write	Enables/Disables authentication failure notification.
INT snOsmEventRmonAlarm	1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.5	INTEGER	read-write	Enables/Disables RMon alarm notification.
INT snOsmEventPowerChange	1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.6	INTEGER	read-write	Enables/Disables power change notification.
INT snOsmEventRmStateChange	1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.7	INTEGER	read-write	Enables/Disables RM state change notification.
INT snOsmEventStandbyStateChange	1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.8	INTEGER	read-write	Enables/Disables standby state change notification.
INT snOsmEventFault	1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.9	INTEGER	read-write	Enables/Disables fault notification.
snOsmDigitalInEventTable	1.3.6.1.4.1.4196.1.1.2.100.2.1.63		not-accessible	Digital-In event configuration table.
snOsmDigitalInEventEntry	1.3.6.1.4.1.4196.1.1.2.100.2.1.63.1		not-accessible	Digital-In events table rows entries.
INT snOsmDigitalInIndex	1.3.6.1.4.1.4196.1.1.2.100.2.1.63.1.1	INTEGER	read-only	Index of Digital-In.
STR snOsmDigitalInName	1.3.6.1.4.1.4196.1.1.2.100.2.1.63.1.2	DisplayString	read-write	Name of Digital-In.
INT snOsmDigitalInMailEvent	1.3.6.1.4.1.4196.1.1.2.100.2.1.63.1.3	INTEGER	read-write	Enables/Disables Digital-In E-Mail notification.
INT snOsmDigitalInTrapEvent	1.3.6.1.4.1.4196.1.1.2.100.2.1.63.1.4	INTEGER	read-write	Enables/Disables Digital-In Trap notification.
INT snOsmDigitalInLogEvent	1.3.6.1.4.1.4196.1.1.2.100.2.1.63.1.5	INTEGER	read-write	Enables/Disables Digital-In LogTable notification.
INT snOsmDigitalInState	1.3.6.1.4.1.4196.1.1.2.100.2.1.63.1.6	INTEGER	read-only	State of the Digital-In.
INT snConfigId	1.3.6.1.4.1.4196.1.1.2.100.2.1.100	INTEGER	read-only	OSM/ESM hardware type.
INT snSwitchFlowControl	1.3.6.1.4.1.4196.1.1.2.100.2.1.101	INTEGER	read-write	Enable/Disable flow control functionality.
INT snSwitchSnifferSrc	1.3.6.1.4.1.4196.1.1.2.100.2.1.102	INTEGER	read-write	Source port for traffic mirroring.
INT snSwitchSnifferDest	1.3.6.1.4.1.4196.1.1.2.100.2.1.103	INTEGER	read-write	Destination port for traffic mirroring.
INT snSwitchSnifferEnable	1.3.6.1.4.1.4196.1.1.2.100.2.1.104	INTEGER	read-write	Enable/Disable mirroring functionality.
INT snSwitchAgingEnable	1.3.6.1.4.1.4196.1.1.2.100.2.1.105	INTEGER	read-write	Enable/Disable auto-aging functionality of the learning table.
INT snSwitchRmonMode	1.3.6.1.4.1.4196.1.1.2.100.2.1.106	INTEGER	read-write	Enable/Disable RMon functionality (statistics, history, alarm, events).
INT snSwitchFdbImagePollTime	1.3.6.1.4.1.4196.1.1.2.100.2.1.107	INTEGER	read-write	Polling time for update of learning table image.
INT snSwitchLearningTableEntries	1.3.6.1.4.1.4196.1.1.2.100.2.1.108	INTEGER	read-only	Number of entries in learning table image.
INT snSwitchTimeToNextDataStore	1.3.6.1.4.1.4196.1.1.2.100.2.1.109	INTEGER	read-only	Time in seconds, when the next saving of configuration data and log entries takes place.
INT snSwitchFlushDataStore	1.3.6.1.4.1.4196.1.1.2.100.2.1.110	INTEGER	write-only	Force direct saving of configuration data and log entries.
INT snLastObject	1.3.6.1.4.1.4196.1.1.2.100.999	INTEGER	read-only	This object is defined as a dummy object. The object is used to indicate that no other objects can appear after it in this private MIB. The only purpose of this object is for MIB browsers that need a valid object at the end of a private MIB.
snmpV2	1.3.6.1.6
snmpModules	1.3.6.1.6.3
snmpMIB	1.3.6.1.6.3.1
snmpMIBObjects	1.3.6.1.6.3.1.1
snmpTraps	1.3.6.1.6.3.1.1.5

RFC description

Siemens SIMATIC NET industrial Ethernet switch and hub management for OSM/ESM products.

Start monitoring Siemens-related optical switch module (OSM)-style network equipment (TFTP firmware download/event log status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SN-OSM-PRIV-MIB

What Is SN-OSM-PRIV-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description