SPP-OPT-MIB

All MIBs › SPP-OPT-MIB

Category: Generic / Unclassified

Description: Manages SPP protocol optional feature configuration and associated operational parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SPP-OPT-MIB?

SPP-OPT-MIB is a sparsely documented MIB module whose name and short description indicate it manages optional feature configuration for an "SPP" protocol, though the source module provides no MODULE-IDENTITY description text or object list to confirm further vendor or technology context. Based on its naming convention, it likely exposes configuration switches and parameters for optional protocol extensions layered on top of a base SPP implementation. Without visible sample objects, its exact hardware/software monitoring role cannot be confirmed from available metadata, but MIBs of this naming pattern typically expose feature-enable flags and related operational status rather than deep hardware telemetry. Any dependency on other MIBs or standards is not evident from the available data. It would be deployed wherever the associated SPP protocol implementation runs, most likely on a specific vendor's network or telecom equipment. Engineers can download the SPP-OPT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SPP-OPT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

vendor/product unclear from available metadata; likely a specific vendor's network or telecom device implementing the SPP protocol

Monitoring Examples

No sample objects were provided for this MIB, and the module description is empty, so no concrete polling scenario or realistic monitoring example can be honestly constructed from the available data.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
cdx6500	1.3.6.1.4.1.449.2.1
cdx6500CfgProtocolGroup	1.3.6.1.4.1.449.2.1.2.1
cdx6500Configuration	1.3.6.1.4.1.449.2.1.2
cdx6500Controls	1.3.6.1.4.1.449.2.1.4
INT cdx6500ContSPPPortBoot	1.3.6.1.4.1.449.2.1.4.13.1.1.2	INTEGER	write-only	Boots the specified SPP Port boot : Boot the port.
INT cdx6500ContSPPPortDisable	1.3.6.1.4.1.449.2.1.4.13.1.1.4	INTEGER	write-only	Disables the specified SPP Port. disable : Disable Port.
INT cdx6500ContSPPPortEnable	1.3.6.1.4.1.449.2.1.4.13.1.1.3	INTEGER	write-only	Enables the specified SPP Port. enable : Enable the Port.
cdx6500ContSPPPortEntry	1.3.6.1.4.1.449.2.1.4.13.1.1		not-accessible	Entries in the SPP Port Control Table.
INT cdx6500ContSPPPortNum	1.3.6.1.4.1.449.2.1.4.13.1.1.1	INTEGER	not-accessible	Port Number of this port.
INT cdx6500ContSPPPortResetStats	1.3.6.1.4.1.449.2.1.4.13.1.1.5	INTEGER	write-only	Reset statistics for the specified SPP Port. reset : Reset port statistics.
cdx6500ContSPPPortTable	1.3.6.1.4.1.449.2.1.4.13.1		not-accessible	This table contains the SPP Port Control parameters.
INT cdx6500ContSPPStnBoot	1.3.6.1.4.1.449.2.1.4.13.2.1.3	INTEGER	not-accessible	Boots the secified SPP station boot : Boot the station.
INT cdx6500ContSPPStnDisable	1.3.6.1.4.1.449.2.1.4.13.2.1.5	INTEGER	write-only	Disables the specified SPP station. disable : Disable Station.
INT cdx6500ContSPPStnEnable	1.3.6.1.4.1.449.2.1.4.13.2.1.4	INTEGER	write-only	Enables the specified SPP station. enable : Enable station.
cdx6500ContSPPStnEntry	1.3.6.1.4.1.449.2.1.4.13.2.1		not-accessible	Entries in the SPP Station Control Table.
INT cdx6500ContSPPStnId	1.3.6.1.4.1.449.2.1.4.13.2.1.2	INTEGER	not-accessible	SPP station number.
INT cdx6500ContSPPStnResetStats	1.3.6.1.4.1.449.2.1.4.13.2.1.6	INTEGER	write-only	Reset statistics for the specified SPP station. reset : Reset station statistics.
cdx6500ContSPPStnTable	1.3.6.1.4.1.449.2.1.4.13.2		not-accessible	This table contains the SPP Station Control parameters.
cdx6500ContSPPTable	1.3.6.1.4.1.449.2.1.4.13
cdx6500PCTPortProtocolGroup	1.3.6.1.4.1.449.2.1.2.1.1
cdx6500PCTStationProtocolGroup	1.3.6.1.4.1.449.2.1.2.1.3
cdx6500PPCTSPPPortEntry	1.3.6.1.4.1.449.2.1.2.1.1.30.1		not-accessible	Entries in the SPP Port Configuration Table.
cdx6500PPCTSPPPortTable	1.3.6.1.4.1.449.2.1.2.1.1.30		not-accessible	This table contains the SPP Port configuration parameters.
cdx6500PPSTSPPPStatEntry	1.3.6.1.4.1.449.2.1.3.1.1.31.1		not-accessible	Entries in the SPP Port Statistics Table.
cdx6500PPSTSPPPStatsTable	1.3.6.1.4.1.449.2.1.3.1.1.31		not-accessible	This table contains the SPP Port Statistics Parameters.
cdx6500PSTPortProtocolGroup	1.3.6.1.4.1.449.2.1.3.1.1
cdx6500PSTStationProtocolGroup	1.3.6.1.4.1.449.2.1.3.1.3
INT cdx6500SContSPPPortNum	1.3.6.1.4.1.449.2.1.4.13.2.1.1	INTEGER	not-accessible	Port Number of this port.
INT cdx6500SPPPCfgBlockingThresh	1.3.6.1.4.1.449.2.1.2.1.1.30.1.10	INTEGER	read-only	This specifies the blocking threshold for the queue being used by the SPP.
INT cdx6500SPPPCfgElectricalInterfaceType	1.3.6.1.4.1.449.2.1.2.1.1.30.1.12	INTEGER	read-only	Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled
INT cdx6500SPPPCfgHighSpeedElectricalInterfaceOption	1.3.6.1.4.1.449.2.1.2.1.1.30.1.14	INTEGER	read-only	Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable
INT cdx6500SPPPCfgInterchTimeout	1.3.6.1.4.1.449.2.1.2.1.1.30.1.4	INTEGER	read-only	This indicates the maximum time period allowed between received characters. time50 : maximum time period allowed 50 seconds. time100 : maximum time period allowed 100 seconds. time150 : maximum time period allowed 150 seconds. time200 : maximum time period allowed 200 seconds. time250 : maximum time period allowed 250 seconds.
INT cdx6500SPPPCfgPortNum	1.3.6.1.4.1.449.2.1.2.1.1.30.1.1	INTEGER	read-only	Port Number of this port.
INT cdx6500SPPPCfgPortSpeed	1.3.6.1.4.1.449.2.1.2.1.1.30.1.3	INTEGER	read-only	This is the speed of the port in bits per second. speed300 : 300 bits per second speed600 : 600 bits per second speed1200 : 1200 bits per second speed1800 : 1800 bits per second speed2400 : 2400 bits per second speed4800 : 4800 bits per second speed7200 : 7200 bits per second speed9600 : 9600 bits per second speed19200 : 19200 bits per second.
INT cdx6500SPPPCfgPortType	1.3.6.1.4.1.449.2.1.2.1.1.30.1.2	INTEGER	read-only	Port Type of the port.
STR cdx6500SPPPCfgProtocolID	1.3.6.1.4.1.449.2.1.2.1.1.30.1.8	DisplayString	read-only	The Protocol Identifier is the first four bytes of the call user data. The default is: 0x11, 0x9F, 0xA7, 0x46.
INT cdx6500SPPPCfgQueueSize	1.3.6.1.4.1.449.2.1.2.1.1.30.1.9	INTEGER	read-only	This specifies the size of the queue which will be used to store the packets to be forwarded to SLC (Smart Line Controller).
INT cdx6500SPPPCfgSLCLineNum	1.3.6.1.4.1.449.2.1.2.1.1.30.1.6	INTEGER	read-only	This specifies the line on the SLC (Smart Line Controller) the port is connected to.
INT cdx6500SPPPCfgSLCNum	1.3.6.1.4.1.449.2.1.2.1.1.30.1.5	INTEGER	read-only	This specifies the SLC (Smart Line Controller) the port is connected to.
STR cdx6500SPPPCfgStnIDList	1.3.6.1.4.1.449.2.1.2.1.1.30.1.7	DisplayString	read-only	List of station identifiers the port will support. A range of station numbers can be entered, for example : 1, 6, 8-12, 250-255 indicates 1, 6, 8, 9, 10, 11, 12, 250, 251, 252, 253, 254, 255 .
INT cdx6500SPPPCfgUnblockThresh	1.3.6.1.4.1.449.2.1.2.1.1.30.1.11	INTEGER	read-only	This specifies the unblocking threshold for the queue being used by the SPP.
INT cdx6500SPPPCfgV24ElectricalInterfaceOption	1.3.6.1.4.1.449.2.1.2.1.1.30.1.13	INTEGER	read-only	Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal
CTR cdx6500SPPPStatChrsIn	1.3.6.1.4.1.449.2.1.3.1.1.31.1.11	Counter	read-only	This indicates the number of characters that have been received by the port.
INT cdx6500SPPPStatChrsInPerSec	1.3.6.1.4.1.449.2.1.3.1.1.31.1.15	INTEGER	read-only	This indicates the rate at which characters have been received by the port.
CTR cdx6500SPPPStatChrsOut	1.3.6.1.4.1.449.2.1.3.1.1.31.1.12	Counter	read-only	This indicates the number of characters that have been transmitted by the port.
INT cdx6500SPPPStatChrsOutPerSec	1.3.6.1.4.1.449.2.1.3.1.1.31.1.16	INTEGER	read-only	This indicates the rate at which characters have been transmitted by the port.
INT cdx6500SPPPStatFlowCntrlState	1.3.6.1.4.1.449.2.1.3.1.1.31.1.9	INTEGER	read-only	This indicates whether the port is blocked by SLC or not.
CTR cdx6500SPPPStatFramesIn	1.3.6.1.4.1.449.2.1.3.1.1.31.1.13	Counter	read-only	This indicates the number of frames that have been received by the port.
INT cdx6500SPPPStatFramesInPerSec	1.3.6.1.4.1.449.2.1.3.1.1.31.1.17	INTEGER	read-only	This indicates the rate at which frames have been received by the port.
CTR cdx6500SPPPStatFramesOut	1.3.6.1.4.1.449.2.1.3.1.1.31.1.14	Counter	read-only	This indicates the number of frames that have been transmitted by the port.
INT cdx6500SPPPStatFramesOutPerSec	1.3.6.1.4.1.449.2.1.3.1.1.31.1.18	INTEGER	read-only	This indicates the rate at which frames have been transmitted by the port.
STR cdx6500SPPPStatLastStatsReset	1.3.6.1.4.1.449.2.1.3.1.1.31.1.10	DisplayString	read-only	This specifies the time stamp of the last statistics reset.
INT cdx6500SPPPStatNoOfErrorFrames	1.3.6.1.4.1.449.2.1.3.1.1.31.1.19	INTEGER	read-only	This indicates the number of erroneous frames received by the port.
INT cdx6500SPPPStatNoOfStns	1.3.6.1.4.1.449.2.1.3.1.1.31.1.20	INTEGER	read-only	This indicates the number of stations on this SLC line.
INT cdx6500SPPPStatPortNum	1.3.6.1.4.1.449.2.1.3.1.1.31.1.1	INTEGER	read-only	Port Number of this port.
INT cdx6500SPPPStatPortSpeed	1.3.6.1.4.1.449.2.1.3.1.1.31.1.4	INTEGER	read-only	This indicates the port speed in bits per second. speed300 : 300 bits per second speed600 : 600 bits per second speed1200 : 1200 bits per second speed1800 : 1800 bits per second speed2400 : 2400 bits per second speed4800 : 4800 bits per second speed7200 : 7200 bits per second speed9600 : 9600 bits per second speed19200 : 19200 bits per second.
INT cdx6500SPPPStatPortStatus	1.3.6.1.4.1.449.2.1.3.1.1.31.1.2	INTEGER	read-only	This indicates the operational status of the port. disabled : port is disabled enabled : port is enabled busyOut : busy out the port up : port is up down : port is down. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility.
INT cdx6500SPPPStatPortType	1.3.6.1.4.1.449.2.1.3.1.1.31.1.3	INTEGER	read-only	This indicates the type of access protocol for this port.
INT cdx6500SPPPStatPortUtilIn	1.3.6.1.4.1.449.2.1.3.1.1.31.1.5	INTEGER	read-only	This indicates the port utilization for the line to port direction.
INT cdx6500SPPPStatPortUtilOut	1.3.6.1.4.1.449.2.1.3.1.1.31.1.6	INTEGER	read-only	This indicates the port utilization for the port to line direction.
INT cdx6500SPPPStatSLCLineNum	1.3.6.1.4.1.449.2.1.3.1.1.31.1.8	INTEGER	read-only	This indicates the line number of the SLC to which the port is connected.
INT cdx6500SPPPStatSLCNum	1.3.6.1.4.1.449.2.1.3.1.1.31.1.7	INTEGER	read-only	This indicates the number of the SLC to which the port is connected.
INT cdx6500SPPSStatAdjChanState	1.3.6.1.4.1.449.2.1.3.1.3.9.1.6	INTEGER	read-only	This indicates whether the port is blocked by the adjacent channel or not.
CTR cdx6500SPPSStatChrsIn	1.3.6.1.4.1.449.2.1.3.1.3.9.1.18	Counter	read-only	This indicates the number of characters received by the PAD from SLC for this station.
INT cdx6500SPPSStatChrsInPerSec	1.3.6.1.4.1.449.2.1.3.1.3.9.1.22	INTEGER	read-only	This indicates the rate at which characters were received by the PAD from SLC for this station.
CTR cdx6500SPPSStatChrsOut	1.3.6.1.4.1.449.2.1.3.1.3.9.1.19	Counter	read-only	This indicates the number of characters sent by the PAD to SLC for this station.
INT cdx6500SPPSStatChrsOutPerSec	1.3.6.1.4.1.449.2.1.3.1.3.9.1.23	INTEGER	read-only	This indicates the rate at which characters were sent by the PAD to SLC for this station.
INT cdx6500SPPSStatCurrCallSummStatus	1.3.6.1.4.1.449.2.1.3.1.3.9.1.7	INTEGER	read-only	This indicates the current status of the SPP station. calling : when it is awaiting call accept from Host connected : when the connection to the Host has been established.
CTR cdx6500SPPSStatFramesIn	1.3.6.1.4.1.449.2.1.3.1.3.9.1.20	Counter	read-only	This indicates the number of frames received by the PAD from SLC for this station.
INT cdx6500SPPSStatFramesInPerSec	1.3.6.1.4.1.449.2.1.3.1.3.9.1.24	INTEGER	read-only	This indicates the rate at which frames were received by the PAD from SLC for this station.
CTR cdx6500SPPSStatFramesOut	1.3.6.1.4.1.449.2.1.3.1.3.9.1.21	Counter	read-only	This indicates the number of frames sent by the PAD to SLC for this station.
INT cdx6500SPPSStatFramesOutPerSec	1.3.6.1.4.1.449.2.1.3.1.3.9.1.25	INTEGER	read-only	This indicates the rate at which frames were sent by the PAD to SLC for this station.
STR cdx6500SPPSStatLastClrCauseCode	1.3.6.1.4.1.449.2.1.3.1.3.9.1.8	DisplayString	read-only	This indicates the cause code received in the last clear packet.
STR cdx6500SPPSStatLastClrDiagCode	1.3.6.1.4.1.449.2.1.3.1.3.9.1.9	DisplayString	read-only	This indicates the diagnostic code received in the last clear packet.
STR cdx6500SPPSStatLastInCallCUD	1.3.6.1.4.1.449.2.1.3.1.3.9.1.13	DisplayString	read-only	This indicates the data in the Call User Data field in the last inbound call request packet.
STR cdx6500SPPSStatLastInCalledAddress	1.3.6.1.4.1.449.2.1.3.1.3.9.1.10	DisplayString	read-only	This indicates the called address in the last inbound call packet.
STR cdx6500SPPSStatLastInCallFacilities	1.3.6.1.4.1.449.2.1.3.1.3.9.1.12	DisplayString	read-only	This indicates the facilities in the last inbound call request packet.
STR cdx6500SPPSStatLastInCallingAddress	1.3.6.1.4.1.449.2.1.3.1.3.9.1.11	DisplayString	read-only	This indicates the calling address in the last inbound call packet.
STR cdx6500SPPSStatLastOutCallCUD	1.3.6.1.4.1.449.2.1.3.1.3.9.1.17	DisplayString	read-only	This indicates the data in the Call User Data field in the last outbound call request packet.
STR cdx6500SPPSStatLastOutCalledAddress	1.3.6.1.4.1.449.2.1.3.1.3.9.1.14	DisplayString	read-only	This indicates the called address in the last outbound call packet.
STR cdx6500SPPSStatLastOutCallFacilities	1.3.6.1.4.1.449.2.1.3.1.3.9.1.16	DisplayString	read-only	This indicates the facilities in the last outbound call request packet.
STR cdx6500SPPSStatLastOutCallingAddress	1.3.6.1.4.1.449.2.1.3.1.3.9.1.15	DisplayString	read-only	This indicates the calling address in the last outbound call packet.
STR cdx6500SPPSStatLastStatsReset	1.3.6.1.4.1.449.2.1.3.1.3.9.1.28	DisplayString	read-only	This specifies the time stamp of the last statistics reset.
INT cdx6500SPPSStatNoOfErrorFrames	1.3.6.1.4.1.449.2.1.3.1.3.9.1.26	INTEGER	read-only	This indicates the number of erroneous frames received.
INT cdx6500SPPSStatPortNum	1.3.6.1.4.1.449.2.1.3.1.3.9.1.1	INTEGER	read-only	Port Number of this port.
INT cdx6500SPPSStatSLCLineNum	1.3.6.1.4.1.449.2.1.3.1.3.9.1.5	INTEGER	read-only	This indicates the line number of the SLC to which the port is connected.
INT cdx6500SPPSStatSLCNum	1.3.6.1.4.1.449.2.1.3.1.3.9.1.4	INTEGER	read-only	This indicates the number of the SLC to which the port is connected.
INT cdx6500SPPSStatStnId	1.3.6.1.4.1.449.2.1.3.1.3.9.1.2	INTEGER	read-only	This specifies the entry number of this station.
STR cdx6500SPPSStatStnState	1.3.6.1.4.1.449.2.1.3.1.3.9.1.27	DisplayString	read-only	This indicates the current status of the configured station. up : station is up dsbl : station is disabled.
INT cdx6500SPPSStatStnStatus	1.3.6.1.4.1.449.2.1.3.1.3.9.1.3	INTEGER	read-only	This indicates the state of the station. disabled : Station is disabled enabled : Station is enabled busyOut : busy out the station up : Station is enabled down : Station is down. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility.
cdx6500SPSTSPPSStatEntry	1.3.6.1.4.1.449.2.1.3.1.3.9.1		not-accessible	Entries in the SPP Station Statistics Table.
cdx6500SPSTSPPStnStatTable	1.3.6.1.4.1.449.2.1.3.1.3.9		not-accessible	This table contains SPP Station statistics parameters.
cdx6500Statistics	1.3.6.1.4.1.449.2.1.3
cdx6500StatProtocolGroup	1.3.6.1.4.1.449.2.1.3.1
cdxProductSpecific	1.3.6.1.4.1.449.2
codex	1.3.6.1.4.1.449

RFC description

Service Provider Platform (SPP) optical equipment MIB; manages optical transponder/multiplexer configuration and optical signal parameters.

Start monitoring vendor/product unclear from available metadata, likely a specific vendor's network or telecom device implementing SPP with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SPP-OPT-MIB

What Is SPP-OPT-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description