SIAE-SOFT-MIB

All MIBs › SIAE-SOFT-MIB

Organization: SIAE MICROELETTRONICA spa

Last Updated: 2015-03-23

Category: Microwave Radio - SIAE MICROELETTRONICA

Description: Manages SIAE MICROELETTRONICA microwave radio software load inventory, activation, and rollback.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SIAE-SOFT-MIB?

SIAE-SOFT-MIB is a vendor MIB from SIAE MICROELETTRONICA for managing software release inventory, activation, and rollback on its microwave radio transmission equipment, part of the telecom microwave backhaul technology area. Although no object list was extracted, MIBs of this purpose typically expose tables listing available software versions/packages stored on the device, the currently active/running version, and controls to trigger activation or rollback to a previous release. This is directly a software-status monitoring function: it lets an operator verify which firmware version a microwave radio is currently running, whether a pending software update has been successfully activated, and provides a safety mechanism to roll back if a new load causes problems. It is a self-contained SIAE enterprise MIB, likely paired with SIAE's other equipment/hardware MIBs for the same radio platform. It is deployed by telecom operators running SIAE microwave radio links for backhaul in cellular and fixed-wireless networks, and operators supporting this equipment can download the SIAE-SOFT-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SIAE-SOFT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

SIAE MICROELETTRONICA microwave radio

Monitoring Examples

No sample objects were available for this module, so a concrete polling scenario using real object names cannot be given; based on the module's stated purpose, an admin would typically expect a software inventory table listing available/active versions and an activation/rollback control object, but the specific object names cannot be confirmed from the available data.

What Can Be Monitored

software version inventory (unconfirmed - no objects available)

Imported Objects

From SIAE-ALARM-MIB

alarmTrap

OBJECT-IDENTITY

From SIAE-EQUIP-MIB

equipIpSnmpAgentAddress

OBJECT-TYPE

From SIAE-TREE-MIB

siaeMib

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString

How to Use in IPNetwork Monitor

Example using softwareEquipmentReleaseBench1Status OID:

Select an SIAE MICROELETTRONICA microwave radio (software release inventory/activation/rollback status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type softwareEquipmentReleaseBench1Status into the Find box to locate it in the OID tree, then select it and click OK. Status of the bench 1 software. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'running', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF softwareDownloadStatusTrap	1.3.6.1.4.1.3373.1103.0.701			This event is generated by ALFOHD-NE when the status of download is changed. The data passed with the event are: 1) equipIpSnmpAgentAddress 2) softwareDownloadStatus
software	1.3.6.1.4.1.3373.1103.7			Maintenance of software releases loaded on SIAE equiment.
INT softwareMibVersion	1.3.6.1.4.1.3373.1103.7.1	INTEGER	read-only	Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.
STR softwareEquipmentReleaseBench1	1.3.6.1.4.1.3373.1103.7.2	DisplayString	read-only	ASCII string identifying the equipment release present in Bench1.
INT softwareEquipmentReleaseBench1StatusEx	1.3.6.1.4.1.3373.1103.7.3	INTEGER	read-only	Status of the bench 1 software.
STR softwareEquipmentReleaseBench2	1.3.6.1.4.1.3373.1103.7.4	DisplayString	read-only	ASCII string identifying the equipment release present in Bench2.
INT softwareEquipmentReleaseBench2Status	1.3.6.1.4.1.3373.1103.7.5	INTEGER	read-only	Status of the bench 2 software.
IP softwareIpAddressDwlServer	1.3.6.1.4.1.3373.1103.7.6	IpAddress	read-write	Ip address of the SNMP manager connected from which the Software is downloaded, if the leaf softwareRemoteIpAddressDwlServer is set '0.0.0.0'.
OCT softwareGosipAddressDwlServer	1.3.6.1.4.1.3373.1103.7.7	OCTET STRING	read-write	GOSIP address of the remote element from which the Software is downloaded.
STR softwareDownloadfile	1.3.6.1.4.1.3373.1103.7.8	DisplayString	read-write	CEM or LOM Directory and name of the descriptor file. The files with the SW code must be present in the same directory.
I32 softwareActionRequest	1.3.6.1.4.1.3373.1103.7.9	Integer32	read-write	This Integer is a bit string with each bit when set has the following meaning: BIT 0 - Download request BIT 1 - Abort Download request BIT 2 - Bench switch request BIT 4 - Partial download BIT 5 - Forced Download BIT 6 - Implicit Activation BIT 7 - Delete bench not running BIT 8 - ODU FW download (whitout activation) BIT 9 - ODU FW activation BIT 10 - IDU FPGA download (whitout activation) BIT 11 - IDU FPGA activation The bit 4...6 enable/disable the different options on download request.
INT softwareDownloadStatus	1.3.6.1.4.1.3373.1103.7.10	INTEGER	read-only	Status of SW download operation.
softwareUnitTable	1.3.6.1.4.1.3373.1103.7.11		not-accessible	Table with Software records concerning units within the equipment.
softwareUnitRecord	1.3.6.1.4.1.3373.1103.7.11.1		not-accessible	Software record.
I32 softwareUnitId	1.3.6.1.4.1.3373.1103.7.11.1.1	Integer32	read-only	This object is used as Index of the softwareUnit Table and also identifies the unit in the equipment.
I32 softwareElementId	1.3.6.1.4.1.3373.1103.7.11.1.2	Integer32	read-only	This object is used as Index of the softwareUnit Table and also identifies the SW programmable element in the specified unit.
INT softwareType	1.3.6.1.4.1.3373.1103.7.11.1.3	INTEGER	read-only	Format type.
STR softwareUnitReleaseBench1	1.3.6.1.4.1.3373.1103.7.11.1.4	DisplayString	read-only	ASCII string identifying the software release present in the programmable element of specified unit bench 1.
STR softwareUnitReleaseBench2	1.3.6.1.4.1.3373.1103.7.11.1.5	DisplayString	read-only	ASCII string identifying the software release present in the programmable element of specified unit bench 2.
STR softwareUnitActualRelease	1.3.6.1.4.1.3373.1103.7.11.1.6	DisplayString	read-only	ASCII string identifying the software release actually present in the programmable element of specified unit.
INT softwareDownloadStatusTrapNotification	1.3.6.1.4.1.3373.1103.7.12	INTEGER	read-write	Enables/disables the trap generation on download status change.
IP softwareRemoteIpAddressDwlServer	1.3.6.1.4.1.3373.1103.7.13	IpAddress	read-write	Ip address of the remote Server from which the Software is downloaded, different from SNMP manager connected IpAddress. It is used if different from '0.0.0.0'. After each download procedure the leaf is set to '0.0.0.0'.

RFC description

Manages software release maintenance and version information for SIAE equipment units.

Start monitoring SIAE MICROELETTRONICA microwave radio (software release inventory/activation/rollback status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SIAE-SOFT-MIB