SIAE-PTP-MIB

All MIBs › SIAE-PTP-MIB

Organization: SIAE MICROELETTRONICA spa

Last Updated: 2016-05-05

Category: Microwave Radio - SIAE MICROELETTRONICA, Synchronization and Timing

Description: Manages SIAE MICROELETTRONICA IEEE 1588 Precision Time Protocol synchronization configuration and status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SIAE-PTP-MIB?

SIAE-PTP-MIB is a vendor MIB from SIAE Microelettronica for managing IEEE 1588 Precision Time Protocol (PTP) synchronization on its telecom transport/microwave radio equipment. It exposes configuration for PTP clock instances/ports (per the ITU-T G.8275.1 telecom profile) and status data reflecting synchronization state. Its principal monitoring value is software/protocol status: PTP clock lock/sync state, offset, and port state, indicating whether the device's timing subsystem is correctly phase/time-synchronized to the network. It explicitly depends on IEEE 1588-2008 and ITU-T G.8275.1/Y.1369.1 as normative references for its PTP object semantics. It is typically deployed on SIAE microwave/transport network elements in mobile backhaul networks requiring precise phase/time synchronization. Engineers can download the SIAE-PTP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SIAE-PTP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

SIAE Microelettronica microwave/transport network element

Monitoring Examples

Since sample_objects is empty for this MIB, no concrete SIAE-PTP-MIB object names are available to ground a specific polling example, though based on the module description an operator would generally be expected to poll PTP clock/port status objects to confirm synchronization lock to the network master clock.

What Can Be Monitored

PTP synchronization/lock state
PTP clock and port configuration

Imported Objects

From IF-MIB

InterfaceIndex

From SIAE-ALARM-MIB

AlarmSeverityCode
AlarmStatus

From SIAE-TREE-MIB

siaeMib

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
ptp	1.3.6.1.4.1.3373.1103.100			SIAE's Precision Time Protocol MIB. For details see: [1] IEEE Std 1588(TM)-2008, Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems, 2008. [2] Recommendation ITU-T G.8275.1/Y1369.1, Precision time protocol telecom profile for phase/time synchronization with full timing support from the network, draft 4 Apr 2014 .
INT ptpMibVersion	1.3.6.1.4.1.3373.1103.100.1	INTEGER	read-only	Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.
ptpProfileDataSet	1.3.6.1.4.1.3373.1103.100.2
CLO ptpSystemProfile	1.3.6.1.4.1.3373.1103.100.2.1	ClockProfileType	read-only	This object specifies the PTP Profile implemented on the system.
STR ptpProfileName	1.3.6.1.4.1.3373.1103.100.2.2	DisplayString	read-only	This object describes the PTP Profile implemented on the system.
I32 ptpProfilePrimaryVersion	1.3.6.1.4.1.3373.1103.100.2.3	Integer32	read-only	The version of the profile consist of two fields: a primaryVersion and a revisionNumber. The profileVersion shall be printed as primaryVersion.revisionNumber
I32 ptpProfileRevisionNumber	1.3.6.1.4.1.3373.1103.100.2.4	Integer32	read-only	The version of the profile consist of two fields: a primaryVersion and a revisionNumber. The profileVersion shall be printed as primaryVersion.revisionNumber
OCT ptpProfileIdentifier	1.3.6.1.4.1.3373.1103.100.2.5	OCTET STRING	read-only	This object show the PTP Profile version on the system.
ptpSpecificDataSet	1.3.6.1.4.1.3373.1103.100.3
ptpSpecificDataSetTable	1.3.6.1.4.1.3373.1103.100.3.1		not-accessible	Table of vendor specific information about the PTP clock for all domains.
ptpSpecificDataSetEntry	1.3.6.1.4.1.3373.1103.100.3.1.1		not-accessible	Contains vendor specific information for a particular PTP clock. Where not otherwise specified, every object of this entry can be modified with the conceptual row active.
INT ptpAdminStatus	1.3.6.1.4.1.3373.1103.100.3.1.1.1	INTEGER	read-write	This object states if PTP is enabled or disabled for this PTP Clock in order to switch on/off the PTP protocol.
T/F ptpStaticPortRole	1.3.6.1.4.1.3373.1103.100.3.1.1.2	TruthValue	read-write	This object states that in the PTP Clock the A-BMCA is disabled and it is working in Static PTP Port Role mode.
CLO ptpClockState	1.3.6.1.4.1.3373.1103.100.3.1.1.3	ClockStateType	read-only	This object shows the current state of the PTP Clock State Machine
INT ptpCompliance	1.3.6.1.4.1.3373.1103.100.3.1.1.4	INTEGER	read-write	This object states if the clock is strictly profile compliant. The meaning of looseCompatibility is application dependent.
ptpSpecificAlarmTable	1.3.6.1.4.1.3373.1103.100.3.2		not-accessible	Table of vendor specific information about the PTP clock for all domains.
ptpSpecificAlarmEntry	1.3.6.1.4.1.3373.1103.100.3.2.1		not-accessible	Contains vendor specific alarm information for a particular PTP clock.
ALA ptpFreeRunningAlarm	1.3.6.1.4.1.3373.1103.100.3.2.1.1	AlarmStatus	read-only	This alarm is raised when ptpClockState is set to freerun(1).
ALA ptpHoldoverInSpecAlarm	1.3.6.1.4.1.3373.1103.100.3.2.1.2	AlarmStatus	read-only	This alarm is raised when ptpClockState is set to holdoverInSpec(4).
ALA ptpHoldoverOutOfSpecAlarm	1.3.6.1.4.1.3373.1103.100.3.2.1.3	AlarmStatus	read-only	This alarm is raised when ptpClockState is set to holdoverOutOfSpec(5).
ALA ptpFreeRunningAlarmSeverityCode	1.3.6.1.4.1.3373.1103.100.3.3	AlarmSeverityCode	read-write	This object defines the severity associated to ptpFreeRunningAlarm and enables or disables the sending of the SNMP Trap on the alarm status transition.
ALA ptpHoldoverInSpecAlarmSeverityCode	1.3.6.1.4.1.3373.1103.100.3.4	AlarmSeverityCode	read-write	This object defines the severity associated to ptpHoldoverInSpecAlarm and enables or disables the sending of the SNMP Trap on the alarm status transition.
ALA ptpHoldoverOutOfSpecAlarmSeverityCode	1.3.6.1.4.1.3373.1103.100.3.5	AlarmSeverityCode	read-write	This object defines the severity associated to ptpHoldoverOutOfSpecAlarm and enables or disables the sending of the SNMP Trap on the alarm status transition.
ptpDefaultDataSet	1.3.6.1.4.1.3373.1103.100.4
ptpClockDataSetTable	1.3.6.1.4.1.3373.1103.100.4.1		not-accessible	Table of information about the PTP clock Default Datasets for all domains.
ptpClockDataSetEntry	1.3.6.1.4.1.3373.1103.100.4.1.1		not-accessible	Contains the information of the clock on a particular doamin. This table will be initialised with default values if the clock is operating as a boundary or ordinary clock in the domain.
NUM ptpClockDomainIndex	1.3.6.1.4.1.3373.1103.100.4.1.1.1	ClockDomainType	read-only	This object specifies the domain number used to create logical group of PTP devices. The Clock Domain is a logical group of clocks and devices that synchronize with each other using the PTP protocol.
CLO ptpClockTypeIndex	1.3.6.1.4.1.3373.1103.100.4.1.1.2	ClockType	read-only	This object specifies the clock type as defined in the Textual convention description.
CLO ptpClockInstanceIndex	1.3.6.1.4.1.3373.1103.100.4.1.1.3	ClockInstanceType	read-only	This object specifies the instance of the Clock for this clock type for the given domain.
OCT ptpClockIdentity	1.3.6.1.4.1.3373.1103.100.4.1.1.4	OCTET STRING	read-only	This is the unique identity of the local clock or management node. This should be the smptpDomainClockIdentity of the domain indicated by the ptpDomainNumber. Configuration of this value will take effect only when the PTP module is enabled.
T/F ptpClockTwoStepFlag	1.3.6.1.4.1.3373.1103.100.4.1.1.5	TruthValue	read-only	This value is TRUE if the clock is two step clock, otherwise it is FALSE. If this value is configured as TRUE, then PTP will transmit the originTimeStamp only through follow-up messages.
I32 ptpClockNumberPorts	1.3.6.1.4.1.3373.1103.100.4.1.1.6	Integer32	read-only	This indicates the number of PTP ports on the device. For an ordinary clock this value should be 1.
CLO ptpClockClass	1.3.6.1.4.1.3373.1103.100.4.1.1.7	ClockQualityClassType	read-only	This object specifies the default dataset Quality Class.
CLO ptpClockAccuracy	1.3.6.1.4.1.3373.1103.100.4.1.1.8	ClockQualityAccuracyType	read-only	This object specifies the default dataset Quality Accurarcy.
I32 ptpClockOffsetScaledLogVariance	1.3.6.1.4.1.3373.1103.100.4.1.1.9	Integer32	read-only	This value is an estimate of the variations of the local clock from a linear timescale when it is not synchronized to another clock using the protocol. The initialization value depends on the inherent characteristics of the clock during initialization. This value is used by the BMC algorithm to select the best master clock
I32 ptpClockPriority1	1.3.6.1.4.1.3373.1103.100.4.1.1.10	Integer32	read-create	This value is used by BMC algorithm to select the best master clock. Lower values take precedence.
I32 ptpClockPriority2	1.3.6.1.4.1.3373.1103.100.4.1.1.11	Integer32	read-create	This value is used by BMC algorithm to select the best master clock. This is used as a tiebreaker when the BMC failes to order the clock using ptpClockPriority1, ptpClockClass, ptpClockAccuracy and ptpClockOffsetScaledLogVariance. Lower values take precedence
T/F ptpClockSlaveOnly	1.3.6.1.4.1.3373.1103.100.4.1.1.12	TruthValue	read-create	Configuring this value as true will make the clock to behave as slave clock. A boundary clock can not be a slave only clock.
INT ptpClockLocalPriority	1.3.6.1.4.1.3373.1103.100.4.1.1.13	INTEGER	read-create	This attribute is used in the alternate BMCA as a tie-breaker in the dataset comparison algorithm, in the event that all other previous attributes of the datasets being compared are equal.
ROW ptpClockRowStatus	1.3.6.1.4.1.3373.1103.100.4.1.1.14	RowStatus	read-create	RowStatus for creating the entries into this table. This object support only destroy and createAndGo values.
ptpCurrentDataSet	1.3.6.1.4.1.3373.1103.100.5
ptpCurrentDataSetTable	1.3.6.1.4.1.3373.1103.100.5.1		not-accessible	Table of information about the PTP clock Current Datasets for all domains.
ptpCurrentDataSetEntry	1.3.6.1.4.1.3373.1103.100.5.1.1		not-accessible	Contains synchronization information on a particular domain.
I32 ptpCurrentStepsRemoved	1.3.6.1.4.1.3373.1103.100.5.1.1.1	Integer32	read-only	This object specifies the distance measured by the number of Boundary clocks between the local clock and the Foreign master as indicated in the stepsRemoved field of Announce messages. Slave clock will update this field once port is selected as slave.
NUM ptpCurrentOffsetFromMaster	1.3.6.1.4.1.3373.1103.100.5.1.1.2	ClockTimeInterval	read-only	This object specifies the current clock dataset ClockOffset value. The value of the computation of the offset in time between a slave and a master clock.
NUM ptpCurrentMeanPathDelay	1.3.6.1.4.1.3373.1103.100.5.1.1.3	ClockTimeInterval	read-only	This object specifies the current clock dataset MeanPathDelay value. The mean path delay between a pair of ports as measure by the delay request-response mechanism.
ptpParentDataSet	1.3.6.1.4.1.3373.1103.100.6
ptpParentDataSetTable	1.3.6.1.4.1.3373.1103.100.6.1		not-accessible	Table of information about the PTP clock Parent Datasets for all domains.
ptpParentDataSetEntry	1.3.6.1.4.1.3373.1103.100.6.1.1		not-accessible	Contains parent clock information on a particular domain.
OCT ptpParentClockIdentity	1.3.6.1.4.1.3373.1103.100.6.1.1.1	OCTET STRING	read-only	This is the clock identity of the port on the master that issues sync messages used in synchronizing this clock. The initial value of this field is the value of ptpClockIdentity
CLO ptpParentPortNumber	1.3.6.1.4.1.3373.1103.100.6.1.1.2	ClockPortNumber	read-only	This is the port number identity of the port on the master that issues sync message used in synchronizing this clock. Combination of ptpParentClockIdentity and ptpParentPortNumber gives the port identity of the parent clock.
OCT ptpParentGMClockIdentity	1.3.6.1.4.1.3373.1103.100.6.1.1.3	OCTET STRING	read-only	This is the clock identity attribute of the grand master clock. The initial value is ptpClockIdentity.
CLO ptpParentGMClockClass	1.3.6.1.4.1.3373.1103.100.6.1.1.4	ClockQualityClassType	read-only	This is the clock class of the grandmaster. The initialization value of this variable is ptpClockClass.
CLO ptpParentGMClockAccuracy	1.3.6.1.4.1.3373.1103.100.6.1.1.5	ClockQualityAccuracyType	read-only	This is the clock accuracy of the grandmaster. The initialization value of this variable is ptpClockAccuracy
I32 ptpParentGMClockOffsetScaledLogVariance	1.3.6.1.4.1.3373.1103.100.6.1.1.6	Integer32	read-only	This is the offset scaled log variance of the grandmaster. The initialization value of this variable is ptpClockOffsetScaledLogVariance
I32 ptpParentGMPriority1	1.3.6.1.4.1.3373.1103.100.6.1.1.7	Integer32	read-only	This is the priority1 of the grandmaster clock. The initialization value of this variable is ptpClockPriority1
I32 ptpParentGMPriority2	1.3.6.1.4.1.3373.1103.100.6.1.1.8	Integer32	read-only	This is the priority2 of the grandmaster clock. The initialization value of this variable is ptpClockPriority2
ptpTimePropertiesDataSet	1.3.6.1.4.1.3373.1103.100.7
ptpTimeDataSetTable	1.3.6.1.4.1.3373.1103.100.7.1		not-accessible	Table of information about the PTP clock Timeproperties Datasets for all domains.
ptpTimeDataSetEntry	1.3.6.1.4.1.3373.1103.100.7.1.1		not-accessible	Contains parent Time properties information of the clock on a particular domain.
I32 ptpTimeCurrentUTCOffset	1.3.6.1.4.1.3373.1103.100.7.1.1.1	Integer32	read-only	If systems epoch is the PTP epoch then this value indicates the offset in seconds between TAI and UTC.
T/F ptpTimeCurrentUTCOffsetValid	1.3.6.1.4.1.3373.1103.100.7.1.1.2	TruthValue	read-only	Value of this variable is TRUE if the ptpTimeCurrentUTCOffset is known to be correct.
T/F ptpTimeLeap59	1.3.6.1.4.1.3373.1103.100.7.1.1.3	TruthValue	read-only	If the systems epoch is PTP epoch then TRUE value of this variable indicates that the last minute of the current UTC day contains 59 seconds.
T/F ptpTimeLeap61	1.3.6.1.4.1.3373.1103.100.7.1.1.4	TruthValue	read-only	If the systems epoch is PTP epoch then TRUE value of this variable indicates that the last minute of the current UTC day contains 61 seconds.
T/F ptpTimeTimeTraceable	1.3.6.1.4.1.3373.1103.100.7.1.1.5	TruthValue	read-only	This variable is TRUE if the timescale and value of ptpTimeCurrentUTCOffset are traceable to a primary reference otherwise, the value shall be FALSE.
T/F ptpTimeFrequencyTraceable	1.3.6.1.4.1.3373.1103.100.7.1.1.6	TruthValue	read-only	This variable is TRUE if the frequecy determining the timescale is traceable to a primary reference otherwise, the value shall be FALSE.
T/F ptpTimescale	1.3.6.1.4.1.3373.1103.100.7.1.1.7	TruthValue	read-only	This variable is TRUE if the clock timescale of the grandmaster clock is PTP otherwise, the value shall be FALSE.
CLO ptpTimeTimeSource	1.3.6.1.4.1.3373.1103.100.7.1.1.8	ClockTimeSourceType	read-only	This is the source of time used by the grandmaster clock. If the time source is known at the time of initialization then the value will be set to that otherwise the initial value is INTERNAL_OSCILLATOR(160).
ptpPortDataSet	1.3.6.1.4.1.3373.1103.100.8
ptpPortDataSetTable	1.3.6.1.4.1.3373.1103.100.8.1		not-accessible	Table Contains PTP configuration information for a particular port of boundary or an ordinary clock
ptpPortDataSetEntry	1.3.6.1.4.1.3373.1103.100.8.1.1		not-accessible	Contains PTP configuration information for a particular port. Valid ptpPortIfIndex need to be given to make this entry active. Where not otherwise specified, every object of this entry can be modified with the conceptual row active.
CLO ptpPortIndex	1.3.6.1.4.1.3373.1103.100.8.1.1.1	ClockPortNumber	read-only	The index value used to identify the port component on the device. The value of this object is used as a port index to the ptpPortConfigDataSetTable.
OCT ptpPortClockIdentity	1.3.6.1.4.1.3373.1103.100.8.1.1.2	OCTET STRING	read-only	This is the clock Identity of the port
NUM ptpPortIfIndex	1.3.6.1.4.1.3373.1103.100.8.1.1.3	InterfaceIndex	read-create	This is the index in ifTable of this port. This object can't be modified.
INT ptpPortStaticRole	1.3.6.1.4.1.3373.1103.100.8.1.1.4	INTEGER	read-create	Role of this port. This object forces the role of the port if ptpStaticPortRole is true.
INT ptpPortAdminStatus	1.3.6.1.4.1.3373.1103.100.8.1.1.5	INTEGER	read-create	Administrive status of the port. The value down turns off the PTP protocol on the ethernet port.
CLO ptpPortState	1.3.6.1.4.1.3373.1103.100.8.1.1.6	ClockPortState	read-only	This denotes the PTP State of the PTP port as computed by the PTP State event machine. initializing: While a port is in the INITIALIZING state, the port initializes its data sets, hardware, and communication facilities. No port of the clock shall place any PTP messages on its communication path. If one port of a boundary clock is in the INITIALIZING state, then all ports shall be in the INITIALIZING state. faulty: The fault state of the protocol. A port in this state shall not place any PTP messages except for management messages that are a required response to another management message on its communication path. disabled: The port shall not place any messages on its communication path. In a boundary clock, no activity at the port shall be allowed to affect the activity at any other port of the boundary clock. A port in this state shall discard all PTP received messages except for management messages. listening: The port is waiting for the announceReceiptTimeout to expire or to receive an Announce message from a master. The purpose of this state is to allow orderly addition of clocks to a domain. A port in this state shall not place any PTP messages on its communication path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, or signaling messages, or management messages that are a required response to another management message. premaster: The port shall behave in all respects as though it were in the MASTER state except that it shall not place any messages on its communication path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, signaling or management messages. master: The port is behaving as a master port. It will periodically send announce and sync messages. passive: The port shall not place any messages on its communication path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, or signaling messages or management messages that are a required response to another management message. uncalibrated: This is a transient state to allow initialization of synchronization servos, updating of data sets when a new master port has been selected, and other implementation-specific activity. slave: The port is synchronizing to the selected master port.
I32 ptpPortMinDelayReqInterval	1.3.6.1.4.1.3373.1103.100.8.1.1.7	Integer32	read-create	This is the log to the base 2 of the delay request interval in seconds. This speifies the time to the members devices to send delay request messages when the port is in the master. It specify the minimum permitted mean time interval between successive Delay_Req messages, min delay request interval value is a compromise between the fluctuation in link delay and startup time and the communication and computation load imposed by transmission of these messages.
I32 ptpPortLogAnnounceInterval	1.3.6.1.4.1.3373.1103.100.8.1.1.8	Integer32	read-create	This is the log to the base 2 of the mean Announce message interval in seconds.
I32 ptpPortAnnounceReceiptTimeout	1.3.6.1.4.1.3373.1103.100.8.1.1.9	Integer32	read-create	This is the Announce receipt time out value. This should be an integral multiple of announce interval in seconds
I32 ptpPortSyncInterval	1.3.6.1.4.1.3373.1103.100.8.1.1.10	Integer32	read-create	This is the logarithm to the base 2 of the sync message interval in seconds
CLO ptpPortDelayMechanism	1.3.6.1.4.1.3373.1103.100.8.1.1.11	ClockMechanismType	read-only	This indicates the propagation delay measuring option used by the port in computing meanpathDelay.
I32 ptpPortVersionNumber	1.3.6.1.4.1.3373.1103.100.8.1.1.12	Integer32	read-only	This indicates the PTP version in use on the port.
T/F ptpPortNotSlave	1.3.6.1.4.1.3373.1103.100.8.1.1.13	TruthValue	read-create	This attribute is used in the alternate BMCA to prevent that a port can be placed in the SLAVE state.
I32 ptpPortLocalPriority	1.3.6.1.4.1.3373.1103.100.8.1.1.14	Integer32	read-create	This attribute is used in the alternate BMCA as a tie-breaker in the dataset comparison algorithm, in the event that all other previous attributes of the datasets being compared are equal.
INT ptpPortDestMacAddress	1.3.6.1.4.1.3373.1103.100.8.1.1.15	INTEGER	read-create	This attribute is used in to select the destination MAC address inserted in the outgoing packets: forwardable: 01-1B-19-00-00-00 nonForwardable: 01-80-C2-00-00-0E
I32 ptpPortTxAsymmetryCompensation	1.3.6.1.4.1.3373.1103.100.8.1.1.16	Integer32	read-create	This attribute is used to compensate in nanoseconds the asymmetric delay. It works in TX direction.
I32 ptpPortRxAsymmetryCompensation	1.3.6.1.4.1.3373.1103.100.8.1.1.17	Integer32	read-create	This attribute is used to compensate in nanoseconds the asymmetric delay. It works in RX direction.
ROW ptpPortRowStatus	1.3.6.1.4.1.3373.1103.100.8.1.1.18	RowStatus	read-create	RowStatus for creating the entries into this table. This object can't be modified.
ptpPortAlarmTable	1.3.6.1.4.1.3373.1103.100.8.2		not-accessible	Table Contains PTP alarm information for a particular port of boundary or an ordinary clock.
ptpPortAlarmEntry	1.3.6.1.4.1.3373.1103.100.8.2.1		not-accessible	Contains PTP alarm information for a particular port.
ALA ptpPortFaultyAlarm	1.3.6.1.4.1.3373.1103.100.8.2.1.1	AlarmStatus	read-only	This alarm is raised when ptpPortState is set to faulty(2).
ALA ptpPortInitializingAlarm	1.3.6.1.4.1.3373.1103.100.8.2.1.2	AlarmStatus	read-only	This alarm is raised when ptpPortState is set to initializing(1).
ALA ptpPortUncalibratedAlarm	1.3.6.1.4.1.3373.1103.100.8.2.1.3	AlarmStatus	read-only	This alarm is raised when ptpPortState is set to uncalibrated(8).
ALA ptpPortListeningAlarm	1.3.6.1.4.1.3373.1103.100.8.2.1.4	AlarmStatus	read-only	This alarm is raised when ptpPortState is set to listening(4).
ALA ptpPortActiveStatus	1.3.6.1.4.1.3373.1103.100.8.2.1.5	AlarmStatus	read-only	This alarm is raised when ptpPortState is set to slave(9).
ptpPortRadioAlarmTable	1.3.6.1.4.1.3373.1103.100.8.3		not-accessible	Table Contains PTP alarm information for a radio port of boundary or an ordinary clock.
ptpPortRadioAlarmEntry	1.3.6.1.4.1.3373.1103.100.8.3.1		not-accessible	Contains PTP alarm information for a radio port.
ALA ptpPortRadioCapacityAlarm	1.3.6.1.4.1.3373.1103.100.8.3.1.1	AlarmStatus	read-only	This alarm is raised when the capacity of a radio link is not big enough to transport PTP packets.
ALA ptpPortFaultyAlarmSeverityCode	1.3.6.1.4.1.3373.1103.100.8.4	AlarmSeverityCode	read-write	This object defines the severity associated to ptpPortFaultyAlarm and enables or disables the sending of the SNMP Trap on the alarm status transition.
ALA ptpPortInitializingAlarmSeverityCode	1.3.6.1.4.1.3373.1103.100.8.5	AlarmSeverityCode	read-write	This object defines the severity associated to ptpPortInitializingAlarm and enables or disables the sending of the SNMP Trap on the alarm status transition.
ALA ptpPortUncalibratedAlarmSeverityCode	1.3.6.1.4.1.3373.1103.100.8.6	AlarmSeverityCode	read-write	This object defines the severity associated to ptpPortUncalibratedAlarm and enables or disables the sending of the SNMP Trap on the alarm status transition.
ALA ptpPortListeningAlarmSeverityCode	1.3.6.1.4.1.3373.1103.100.8.7	AlarmSeverityCode	read-write	This object defines the severity associated to ptpPortListeningAlarm and enables or disables the sending of the SNMP Trap on the alarm status transition.
ALA ptpPortActiveStatusSeverityCode	1.3.6.1.4.1.3373.1103.100.8.8	AlarmSeverityCode	read-write	This object enables or disables the sending of the SNMP Trap on ptpPortActiveStatus transition.
ALA ptpPortRadioCapacityAlarmSeverityCode	1.3.6.1.4.1.3373.1103.100.8.9	AlarmSeverityCode	read-write	This object enables or disables the sending of the SNMP Trap on ptpPortRadioCapacityAlarm transition.
ptpClockPPSDataSet	1.3.6.1.4.1.3373.1103.100.9
ptpClockPPSDataSetTable	1.3.6.1.4.1.3373.1103.100.9.1		not-accessible	Table of information about the PTP clock PPS and ToD properties.
ptpClockPPSDataSetEntry	1.3.6.1.4.1.3373.1103.100.9.1.1		not-accessible	Contains PPS and ToD properties information of the specific domain and clock on a specific PPS socket.
CLO ptpClockPPSInstanceIndex	1.3.6.1.4.1.3373.1103.100.9.1.1.1	ClockPPSInstanceType	read-write	This object specifies the id of PPS interface socket. It represents the id of ToD interface socket too.
U32 ptpClockPPSInstanceCapability	1.3.6.1.4.1.3373.1103.100.9.1.1.2	Unsigned32	read-only	This object is a bitmap and each bit represents a specific capability of the PPS or ToD interface. Bit 0 : 1 = the interface can be used either in input or in output and the user can select the direction using ptpClockPPSDirection object; 0 = the interface can have one direction specified by the system, in this case the ptpClockPPSDirection object is read only. Bit 1 : 1 = the ToD interface allows more baudrate; 0 = the ToD interface allows one only baudrate, fixed by system.
INT ptpClockPPSDirection	1.3.6.1.4.1.3373.1103.100.9.1.1.3	INTEGER	read-write	This object specifies the direction (input or output) of PPS signal and ToD data
STR ptpClockPPSLabel	1.3.6.1.4.1.3373.1103.100.9.1.1.4	DisplayString	read-only	This object specifies the label as appears near the PPS signal socket
INT ptpClockPPSAdminStatus	1.3.6.1.4.1.3373.1103.100.9.1.1.5	INTEGER	read-write	This object is the administrive status of PPS interface and specifies whether the node is enabled for PTP input/output clocking using the PPS interface.
T/F ptpClockPPSOffsetEnabled	1.3.6.1.4.1.3373.1103.100.9.1.1.6	TruthValue	read-write	This object specifies whether an offset is configured in order to compensate for a known phase error such as network asymmetry.
I32 ptpClockPPSOffsetValue	1.3.6.1.4.1.3373.1103.100.9.1.1.7	Integer32	read-write	This object specifies the fixed offset signed value in nanoseconds configured to be added for the PPS output or input.
STR ptpClockToDLabel	1.3.6.1.4.1.3373.1103.100.9.1.1.8	DisplayString	read-only	This object specifies the label as appears near the ToD socket
INT ptpClockToDAdminStatus	1.3.6.1.4.1.3373.1103.100.9.1.1.9	INTEGER	read-write	This object is the administrive status of PPS interface and specifies whether the ToD interface is enabled.
U32 ptpClockToDDelay	1.3.6.1.4.1.3373.1103.100.9.1.1.10	Unsigned32	read-write	This object specifies microseconds of delay between PPS edge and ToD data emitted, used only in output direction.
U32 ptpClockToDBaudrate	1.3.6.1.4.1.3373.1103.100.9.1.1.11	Unsigned32	read-write	This object specifies the Baudrate of ToD signal in input or output direction.
PTP ptpClockToDFormat	1.3.6.1.4.1.3373.1103.100.9.1.1.12	PtpClockToDFormatType	read-write	This object specifies the format of ToD signal in input or output direction.
ptpRadioAsymmetryDataSet	1.3.6.1.4.1.3373.1103.100.10
ptpRadioAsymmetryDataSetTable	1.3.6.1.4.1.3373.1103.100.10.1		not-accessible	Table contains delay offset for asymmetries compensation for the Radio unit.
ptpRadioAsymmetryDataSetEntry	1.3.6.1.4.1.3373.1103.100.10.1.1		not-accessible	Each ntry contains delay offset for asymmetries compensation for a specific Radio unit.
I32 ptpRadioBrIndex	1.3.6.1.4.1.3373.1103.100.10.1.1.1	Integer32	read-only	This is the index in radioTable of this unit. This object can't be modified.
I32 ptpRadioOffset	1.3.6.1.4.1.3373.1103.100.10.1.1.2	Integer32	read-write	This object is an offset in nanoseconds for asymmetry compensation and can have both positive and negative values.

RFC description

Manages IEEE 1588 Precision Time Protocol synchronization for SIAE telecom microwave systems.

Start monitoring SIAE Microelettronica microwave/transport network element (IEEE 1588 PTP clock sync status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SIAE-PTP-MIB

What Is SIAE-PTP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description