All MIBs › SHE-SYSTEM-MIB
Organization: Nokia Siemens Networks
Last Updated: 2009-02-04
Description: Nokia Siemens Networks SHE DSLAM system-level management for NTP/time configuration, SNMP settings, and file transfer of firmware, configuration, error logs, and performance data
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SHE-SYSTEM-MIB?
SHE-SYSTEM-MIB is a Nokia Siemens Networks module providing system-level global configuration and management for the SHE DSLAM platform, including external time (NTP) configuration and SNMP agent settings. A major focus of the module is file management: it defines objects for uploading and downloading firmware loads, configuration files, error logs, remote inventory data, performance data files, and SNMP configuration files. Its monitoring value spans both configuration/software status, confirming the correct firmware load and configuration file are active and that NTP time sync is functioning, and operational housekeeping such as retrieving error logs and performance data files for offline analysis, making it central to remote maintenance of the DSLAM. It relies on standard NTP for time synchronization and standard SNMP mechanisms for its own configuration transfer, though the file-transfer objects themselves are vendor-defined. It is deployed on Nokia Siemens Networks SHE DSLAMs where centralized, remote firmware and configuration management is required across many deployed access nodes. Engineers can download the SHE-SYSTEM-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SHE-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nokia Siemens Networks SHE DSLAM (fixed-line broadband access equipment)
Monitoring Examples
No object/table names were retained in this extract, so a concrete polling walk cannot be grounded in real identifiers here; based on the module's stated scope, an administrator would typically trigger a firmware-load or configuration-file transfer and poll a transfer-status object to confirm it completed successfully, and would periodically retrieve the error-log or performance-data file objects to pull diagnostic data off the DSLAM without a truck roll.
What Can Be Monitored
- NTP/time configuration status
- firmware load transfer status
- configuration file transfer status
- error log retrieval
- performance data file retrieval
This MIB depends on
Related MIBs
Imported Objects
From AN-SHE-MIB
| she | OBJECT-IDENTITY |
From ENTITY-MIB
| PhysicalIndex | |
| entPhysicalIndex | OBJECT-TYPE |
From SHE-ALARMING-MIB
| sheAlarmReportingSource | OBJECT-TYPE |
| sheAlarmReportingSourceType | OBJECT-TYPE |
| sheAlarmSeverity | OBJECT-TYPE |
| sheAlarmTimeAndDate | OBJECT-TYPE |
From SHE-TC-MIB
| SheCardType | |
| SheControlStatusType | |
| SheSystemFileIndexType |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| sheSystem | 1.3.6.1.4.1.231.7.1.2.2.1.2 | Definition of system global information and configuration, e.g. configuration of external time, snmp configuration file management for up and download of - loads, - configuration files - errorlog - remote inventory - performance data file - snmp configuration file | ||
| sheSystemInfo | 1.3.6.1.4.1.231.7.1.2.2.1.2.1 | |||
| STR sheSystemVersion | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.1 | DisplayString | read-only | Contains the version of the net element. The selected version depending on the used CXU SW release and detected shelf type of the running NE!! hiX5625/R2.5 hiX5630/R2.5 hiX5635/R2.5 hiX5625/R2.5.1 hiX5630/R2.5.1 hiX5635/R2.5.1 hiX5625/R2.6 hiX5630/R2.6 hiX5635/R2.6 hiX5625/R2.7 hiX5630/R2.7 hiX5635/R2.7 hiX5625/R2.8 hiX5630/R2.8 hiX5635/R2.8 hiX5625/R2.6S2 hiX5630/R2.6S2 hiX5635/R2.6S2 hiX5625/R2.7MH (support H248) hiX5630/R2.7MH (support H248) hiX5635/R2.7MH (support H248) hiX5625/R2.7MS (support SIP) hiX5630/R2.7MS (support SIP) hiX5635/R2.7MS (support SIP) hiX5625/R2.8M hiX5630/R2.8M hiX5635/R2.8M hiX5622/R2.8 hiX5608/R1.0 The used shelftype could be retrieved from shePhysShelfTable. Systemversion -> possible Shelftypes SHE hiX5635 -> M1200:E, M1100:E, G1100:E, G1100:B:E, G1100:A SHE hiX5630 -> M600:E, G600:E, G600:R:E, M600:DF:E SHE hiX5625 -> M400:E, G400:E, G400:R:A, SHE hiX5622 R1.0 -> MDUS:E (obsolete) SHE hiX5608 R1.0 -> empty string because no shelf is used, single box system Shelftype's 2 generation - only new 2G powermodules could be used! (>= with R2.8 maintenance) SHE hiX5635 -> G1100:2G:E, M1100:2G:E SHE hiX5630 -> G600:2G:E, G600:R:2G:E, SHE hiX5625 -> G400:2G:E, G400:R:2G:A, SHE hiX5622 -> G200:2G:E |
| TIK sheSystemExternalTime | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.2 | TimeTicks | read-only | The external time of the net element (UTC). The TMN-OS should set this time after first time power up or system resets and should refresh it once a day. |
| SHE sheSystemStartupType | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.3 | SheSystemStartupType | read-only | Startup type: 1..resetSystem 2..resetSystemWithDefault |
| SHE sheSystemTmnConnected | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.4 | SheSystemTmnConnectedType | read-only | The value connected indicates that a manager has received the trap sheSytemStartupEnd and has connected. |
| SHE sheSystemLctConnected | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.5 | SheSystemTmnConnectedType | read-only | The value connected indicates that a manager has connected as LCT. SHE sends the trap sheSystemLctConnected to all known TMN systems to inform whether the LCT session has been setup or terminated. |
| sheSystemFeatureCapabilityTable | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.6 | not-accessible | The alarm severity table. The alarm severity table associates profile index and AlarmID pairs with severities to be used for alarm traps. (Note that this table does not apply to cleared alarms). | |
| sheSystemFeatureCapabilityEntry | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.6.1 | not-accessible | Entry of the sheSystemFeatureCapabilityTable. | |
| U32 sheSystemFeatureIndex | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.6.1.1 | Unsigned32 | read-only | The system feature index. |
| STR sheSystemFeatureName | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.6.1.2 | DisplayString | read-only | The system feature name. |
| sheSystemControl | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7 | |||
| SHE sheSystemControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.1 | SheSystemControlRequestType | read-write | System commands : configureTime : The command to configure the external time. tmnConnect : the command for a manager to connect in order to be allowed to manage the SHE and to stop the NE sending the sheSystemStartupEnd trap. tmnDisconnect: the command for a TMN to disconnect from the NE. lctConnect : the command for a manager to connect as a LCT. The SHE then sends the sheSystemLctSession trap. lctDisconnect: the command for a LCT to disconnect from the NE. The SHE then sends the sheSystemLctSession trap. If a LCT does not disconnect a LCT session is automatically disconnected by the SHE after a internal timer expired. writeDatatoFlash: the command to start writing configuration data of all subsystems to flash-memory (long running command). configureTimeZone: the command to change the current timezone. setCPUThreshold: the command to configure the threshold that when CPU usage exceeds the certain limit, notification is sent. setMemoryThreshold: the command to configure the threshold that when Memory usage exceeds the certain limit, notification is sent. Notifications : sheSystemStartupEnd, sheSystemLctSession, sheSystemWriteDatatoFlashFinished, sheSystemChangedCPULoadThreshold, sheSystemChangedMemoryThreshold. |
| SHE sheSystemControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.2 | SheControlStatusType | read-only | The status of a control request. |
| U32 sheSystemControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.3 | Unsigned32 | read-only | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE. |
| SHE sheSystemControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.4 | SheSystemControlRequestResultType | read-only | The result of the last user command. |
| U32 sheSystemControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.5 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| TIK sheSystemControlExternalTime | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.6 | TimeTicks | read-write | The external time of the net element (UTC). The manager should set this time after first time power up or resetSystem and should refresh it once a day. |
| OCT sheSystemControlTimeZone | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.7 | OCTET STRING | read-write | The Time Zone of the net element. The TMN-OS should set this time zone in front of the NE's external time. UTC, UTC+1, UTC+2, UTC+3, UTC+3.30, UTC+4, UTC+4.30, UTC+5, UTC+5.30, UTC+5.45, UTC+6, UTC+6.30, UTC+7, UTC+8, UTC+8.45, UTC+9, UTC+9.30, UTC+10, UTC+10.30, UTC+11, UTC+11.30, UTC+12, UTC+12.45, UTC+13, UTC+14, UTC-1, UTC-2, UTC-2.30, UTC-3, UTC-3.30, UTC-4, UTC-4.30, UTC-5, UTC-6, UTC-7, UTC-8, UTC-9, UTC-9.30, UTC-10, UTC-11, UTC-12, An automatic DST (dayligth saving time) switchover is not supported by the NE!! |
| I32 sheSystemControlCPUThreshold | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.8 | Integer32 | read-write | The CPU Load Threshold of System. The manager should set this threshold about CPU Load. |
| NUM sheSystemControlCPUThresholdInterval | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.9 | SheSystemThresholdIntervalType | read-write | The sampling interval for CPU threshold. Average CPU usage is checked on every interval configured. |
| I32 sheSystemControlMemoryThreshold | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.10 | Integer32 | read-write | The Memory Usage Threshold of System. The manager should set this threshold about Memory usage. |
| NUM sheSystemControlMemoryThresholdInterval | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.11 | SheSystemThresholdIntervalType | read-write | The sampling interval for CPU threshold. Memory usage is checked on every interval configured. |
| OCT sheSystemTimeZone | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.8 | OCTET STRING | read-only | The Time Zone of the net element. The TMN-OS should set this time zone in front of the NE's external time. UTC, UTC+1, UTC+2, UTC+3, UTC+3.30, UTC+4, UTC+4.30, UTC+5, UTC+5.30, UTC+5.45, UTC+6, UTC+6.30, UTC+7, UTC+8, UTC+8.45, UTC+9, UTC+9.30, UTC+10, UTC+10.30, UTC+11, UTC+11.30, UTC+12, UTC+12.45, UTC+13, UTC+14, UTC-1, UTC-2, UTC-2.30, UTC-3, UTC-3.30, UTC-4, UTC-4.30, UTC-5, UTC-6, UTC-7, UTC-8, UTC-9, UTC-9.30, UTC-10, UTC-11, UTC-12, An automatic DST (dayligth saving time) switchover is not supported by the NE!! |
| I32 sheSystem5SecCPULoad | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.9 | Integer32 | read-only | The Avg. Value of CPU Load for 5 seconds. |
| I32 sheSystem1MinCPULoad | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.10 | Integer32 | read-only | The Avg. Value of CPU Load for 1 minute. |
| I32 sheSystem10MinCPULoad | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.11 | Integer32 | read-only | The Avg. Value of CPU Load for 1p minutes. |
| I32 sheSystemCPULoadThreshold | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.12 | Integer32 | read-only | The threshold of CPU Load. |
| NUM sheSystemCPULoadThresholdInterval | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.13 | SheSystemThresholdIntervalType | read-only | The sampling interval of CPU Load. |
| I32 sheSystemTotalMemory | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.14 | Integer32 | read-only | The Total memory of system. |
| I32 sheSystemUsedMemory | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.15 | Integer32 | read-only | The Used memory of system. |
| I32 sheSystemFreeMemory | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.16 | Integer32 | read-only | The Free memory of system. |
| I32 sheSystemMemoryThreshold | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.17 | Integer32 | read-only | The threshold of Memory Usage. |
| NUM sheSystemMemoryThresholdInterval | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.18 | SheSystemThresholdIntervalType | read-only | The sampling interval of Memory Usage. |
| STR sheSystemBootloaderVersion | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.19 | DisplayString | read-only | Contains the version of bootloader. |
| SHE sheSystemCliConnected | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.20 | SheSystemTmnConnectedType | read-only | The value connected indicates that a CLI session is active. SHE sends the trap sheSystemCliConnected to all known TMN systems to inform whether the CLI session has been setup or terminated. |
| SHE sheSystemStartupResult | 1.3.6.1.4.1.231.7.1.2.2.1.2.1.21 | SheSystemStartupResultType | read-only | Result of the last NE startup . Values: startupInProgress(1), startupFailed(2), startupFinished(3) |
| sheSystemFile | 1.3.6.1.4.1.231.7.1.2.2.1.2.2 | |||
| sheSystemFileControl | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1 | |||
| SHE sheSystemFileControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.1 | SheSystemFileControlRequestType | read-write | File management commands : upload : a file is uploaded to the FTP server from the SHE NE. download : a file is downloaded from a FTP server to the SHE NE. uploadCardsAllOfType : upload for all cards af the same type. downloadCardsAllOfType : download for all cards af the same type. uploadAllOfSystem : Only for upload of all available remote inventory records! Parameters specify the type of file and the FTP server. downloads: - SW to a singleCard : commands to load a new load - SW to all cards of a type - restoreFile (configuration files) uploads: - log files - restoreFile (congfiguration files) - remote inventory (also AllOfSystem) - performance data Notifications : sheSystemFtp sheSystemSwLoadPromoted Alarms: sheSystemSwmFtpAccessError sheSystemSwmFtpExternalAccessError |
| SHE sheSystemFileControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.2 | SheControlStatusType | read-only | The status of a control request. |
| U32 sheSystemFileControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.3 | Unsigned32 | read-only | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE. |
| SHE sheSystemFileControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.4 | SheSystemFileControlRequestResultType | read-only | The result of the last user command. |
| U32 sheSystemFileControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.5 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| SHE sheSystemFileControlTypeOfFile | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.6 | SheSystemTypeOfFile | read-write | The file type definition: 1..stored load, (only download) 2..error log, (only upload) 3..restoreFile (both up/download) 4..remoteInventory (only upload, AllOfSystem possible) 5..performanceData (only upload) 6..alarmLog (only upload) 7..uptimeLog (only upload) |
| OCT sheSystemFileControlPathName | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.7 | OCTET STRING | read-write | Path name of file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Spaces in pathnames are not allowed, because of possible problems with different FTP implementations (client and/or server)!! |
| OCT sheSystemFileControlFileName | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.8 | OCTET STRING | read-write | File name of file on FTP server. Spaces in filenames are not allowed, because of possible problems with different FTP implementations (client and/or server)!! |
| SHE sheSystemFileControlCardType | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.9 | SheCardType | read-write | The card type to be upgraded. |
| PHY sheSystemFileControlEntPhysicalIndex | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.10 | PhysicalIndex | read-write | The entPhysicalIndex of the card to be loaded. |
| SHE sheSystemFileControlLoadStatus | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.12 | SheSystemFileLoadStatusType | read-only | Status of SHE download. 1..finished, 2..running, 3..broken, |
| OCT sheSystemFileControlServerAddr | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.13 | OCTET STRING | read-write | Address of FTP server (dotted notation). Attribute only valid in var bind list with correct sheSystemFileControlCommand. Read-access will report an empty string. |
| OCT sheSystemFileControlUsrName | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.14 | OCTET STRING | read-write | Username for FTP access. Attribute only valid in var bind list with correct sheSystemFileControlCommand. Read-access will report an empty string. |
| OCT sheSystemFileControlPassword | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.15 | OCTET STRING | read-write | Password for FTP access. Attribute only valid in var bind list with correct sheSystemFileControlCommand. Read-access will report an empty string. |
| sheSystemFileSwFileTable | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.2 | not-accessible | File Table of SHE. List of all files per card present on the SHE and their counterpart on the FTP server Information about Primary and Secondary loads is also found in this table. | |
| sheSystemFileSwFileEntry | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.2.1 | not-accessible | An entry in the sheSystemFileSwTable. Notifications : none. | |
| SHE sheSystemFileSwfIndex | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.2.1.1 | SheSystemFileIndexType | read-only | Second Index of file table. |
| OCT sheSystemFileSwfFileName | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.2.1.2 | OCTET STRING | read-only | File name of file in SHE file system. |
| SHE sheSystemFileSwfTypeOfFile | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.2.1.3 | SheSystemTypeOfFile | read-only | The file type definition: 1..stored load, (only download) 2..error log, (only upload) 3..restoreFile (both up/download) 4..remoteInventory (only upload, AllOfSystem possible) 5..performanceData (only upload) 6..alarmLog (only upload) 7..uptimeLog (only upload) |
| OCT sheSystemFileSwfVersion | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.2.1.4 | OCTET STRING | read-only | File or software version of file in the SHE file system. |
| I32 sheSystemFileSwfSize | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.2.1.5 | Integer32 | read-only | Size of file in SHE file system. |
| U32 sheSystemFileSwfTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.2.2.2.1.6 | Unsigned32 | read-only | Time stamp of file in file system of SHE. |
| sheSystemNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.2.3 | |||
| sheSystemEvents | 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1 | |||
| NTF sheSystemStartupEnd | 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.1 | End of startup. | ||
| NTF sheSystemFtp | 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.2 | Reports the result of a file up/download. The sheSystemFileControlRequest reports either upload / download The sheSystemFileControlLoadStatus reports either finished / ongoing / broken. | ||
| NTF sheSystemSwLoadPromoted | 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.3 | The upgraded load is promoted to be good/trusted. | ||
| NTF sheSystemSwLoadPromotionFailed | 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.4 | Sent when load promotion failed. Card will restart with fallback load. The ReqResult should contain some detailed information about the error-reason (tbd.). | ||
| NTF sheSystemLctSession | 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.5 | A LCT session is connected or disconnected. | ||
| NTF sheSystemWriteDatatoFlashFinished | 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.6 | Description. | ||
| NTF sheSystemChangedCPULoadThreshold | 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.7 | CPU Load Threshold change state by user. | ||
| NTF sheSystemChangedMemoryThreshold | 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.8 | Memory usage Threshold change state by user. | ||
| NTF sheSystemCliSession | 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.9 | A CLI session is connected or disconnected. | ||
| sheSystemAlarms | 1.3.6.1.4.1.231.7.1.2.2.1.2.3.2 | |||
| NTF sheSystemCPULoadThresholdExceeded | 1.3.6.1.4.1.231.7.1.2.2.1.2.3.2.1 | Measured CPU load has exceeded the threshold in the given measuring interval. | ||
| NTF sheSystemMemoryThresholdExceeded | 1.3.6.1.4.1.231.7.1.2.2.1.2.3.2.2 | Measured memory usage has exceeded the threshold in the given measuring interval. | ||
| sheSystemNtpClient | 1.3.6.1.4.1.231.7.1.2.2.1.2.5 | |||
| INT sheSystemNtpClientEnabled | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.1 | INTEGER | read-only | NTP Client enable status. |
| I32 sheSystemNtpClientXmitInterval | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.2 | Integer32 | read-only | NTP Client transmit-packet interval to request time information from NTP server.. Valid range is 1 hour up to 2160 hours (3 months). The default value should be 24 hours. |
| sheSystemNtpClientServerTable | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.3 | not-accessible | NTP Client server Table of SHE. | |
| sheSystemNtpClientServerEntry | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.3.1 | not-accessible | An entry in the sheSystemNtpClientTable. Notifications : none. | |
| I32 sheSystemNtpClientServerIndex | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.3.1.1 | Integer32 | read-only | Index of file table. |
| OCT sheSystemNtpClientServerName | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.3.1.2 | OCTET STRING | read-only | Server name of NTP Client in SHE NTP Client system. |
| sheSystemNtpClientControl | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4 | |||
| SHE sheSystemNtpClientControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4.1 | SheSystemNtpClientControlRequestType | read-write | NtpClient management commands : enabledNtpClient : NtpClient client is enabled by users. disabledNtpClient : NtpClient client is disabled bu users changedNtpClientXmitInterval : NtpClient transmit-packet interval is changed by users. addedNtpClientServerName : NtpClient source hostname is added into source list. deletedNtpClientServerName : NtpClient source hostname is deleted in source list. Notifications: ZZZZZZ |
| SHE sheSystemNtpClientControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4.2 | SheControlStatusType | read-only | The status of a control request. |
| U32 sheSystemNtpClientControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4.3 | Unsigned32 | read-only | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE. |
| SHE sheSystemNtpClientControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4.4 | SheSystemNtpClientControlRequestResultType | read-only | The result of the last user command. |
| U32 sheSystemNtpClientControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4.5 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| I32 sheSystemNtpClientControlXmitInterval | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4.6 | Integer32 | read-write | Configure NTP Client transmit-packet interval to request time information from NTP server.. Valid range is 1 hour up to 2160 hours (3 months). The default value should be 24 hours. |
| OCT sheSystemNtpClientControlServername | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4.7 | OCTET STRING | read-write | NtpClient Source hostname or Ip address to get current time. |
| I32 sheSystemNtpClientControlServerIndex | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4.8 | Integer32 | read-write | Index of the addressed table entry. |
| sheSystemNtpClientNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.5 | |||
| NTF sheSystemNtpClientEnable | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.5.1 | Description. | ||
| NTF sheSystemNtpClientDisable | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.5.2 | Description. | ||
| NTF sheSystemNtpClientChangeXmitInterval | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.5.3 | Description. | ||
| NTF sheSystemNtpClientAddServerName | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.5.4 | Description. | ||
| NTF sheSystemNtpClientDeleteServerName | 1.3.6.1.4.1.231.7.1.2.2.1.2.5.5.5 | Description. | ||
| sheSystemDnsServer | 1.3.6.1.4.1.231.7.1.2.2.1.2.6 | |||
| sheSystemDnsServerTable | 1.3.6.1.4.1.231.7.1.2.2.1.2.6.1 | not-accessible | DNS server Table of SHE. | |
| sheSystemDnsServerEntry | 1.3.6.1.4.1.231.7.1.2.2.1.2.6.1.1 | not-accessible | An entry in the sheSystemDnsServerTable. Notifications : none. | |
| I32 sheSystemDnsServerIndex | 1.3.6.1.4.1.231.7.1.2.2.1.2.6.1.1.1 | Integer32 | read-only | Index of DnsServer table. |
| OCT sheSystemDnsServerAddr | 1.3.6.1.4.1.231.7.1.2.2.1.2.6.1.1.2 | OCTET STRING | read-only | IP address of DNS Server system. |
| sheSystemDnsServerControl | 1.3.6.1.4.1.231.7.1.2.2.1.2.6.2 | |||
| SHE sheSystemDnsServerControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.2.6.2.1 | SheSystemDnsServerControlRequestType | read-write | DNS Server management commands : addedDnsServerName : DNS Server IP Address is added into server list. deletedDnsServerName : DNS Server IP Address is deleted in server list. Notifications: ZZZZZZ |
| SHE sheSystemDnsServerControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.2.6.2.2 | SheControlStatusType | read-only | The status of a control request. |
| U32 sheSystemDnsServerControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.2.6.2.3 | Unsigned32 | read-only | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE. |
| SHE sheSystemDnsServerControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.2.6.2.4 | SheSystemDnsServerControlRequestResultType | read-only | The result of the last user command. |
| U32 sheSystemDnsServerControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.2.6.2.5 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| OCT sheSystemDnsServerControlAddr | 1.3.6.1.4.1.231.7.1.2.2.1.2.6.2.6 | OCTET STRING | read-write | DNS Server Ip address. |
| I32 sheSystemDnsServerControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.2.6.2.7 | Integer32 | read-write | Index of the addressed table entry. |
| sheSystemDnsServerNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.2.6.3 | |||
| NTF sheSystemDnsServerAddAddr | 1.3.6.1.4.1.231.7.1.2.2.1.2.6.3.1 | Description. | ||
| NTF sheSystemDnsServerDeleteAddr | 1.3.6.1.4.1.231.7.1.2.2.1.2.6.3.2 | Description. | ||
| sheSystemManagementSession | 1.3.6.1.4.1.231.7.1.2.2.1.2.7 | |||
| I32 sheSystemManagementSessionSnmpAgingTime | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.1 | Integer32 | read-only | Aging time for SNMP management session. |
| sheSystemManagementSessionTable | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.2 | not-accessible | Management session information table for SHE. | |
| sheSystemManagementSessionEntry | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.2.1 | not-accessible | An entry in the sheSystemManagementSessionTable. Notifications : none. | |
| I32 sheSystemManagementSessionIndex | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.2.1.1 | Integer32 | read-only | Index of Management Session Table. |
| SHE sheSystemManagementSessionType | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.2.1.2 | SheSystemManagementSessionType | read-only | Management Session Type. |
| I32 sheSystemManagementSessionSnmpExpiredTime | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.2.1.3 | Integer32 | read-only | Only SNMP Management Session expired Time. If the session is Telnet, this value is 0. |
| IP sheSystemManagementSessionAddress | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.2.1.4 | IpAddress | read-only | Management Session IP Address. |
| sheSystemManagementSessionControl | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.3 | |||
| SHE sheSystemManagementSessionControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.3.1 | SheSystemManagementSessionControlRequestType | read-write | Management Session global user commands : setSnmpSessionAgingTime : configuring SNMP session aging time. Notifications: sheSystemManagementSessionChangedSnmpAgingTime |
| SHE sheSystemManagementSessionControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.3.2 | SheControlStatusType | read-only | The status of a control request. |
| U32 sheSystemManagementSessionControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.3.3 | Unsigned32 | read-only | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE. |
| SHE sheSystemManagementSessionControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.3.4 | SheSystemManagementSessionControlReqResultType | read-only | The result of the last user command. |
| U32 sheSystemManagementSessionControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.3.5 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| I32 sheSystemManagementSessionControlSnmpAgingTime | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.3.6 | Integer32 | read-write | SNMP Session Aging Time. |
| sheSystemManagementSessionNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.4 | |||
| NTF sheSystemManagementSessionConnection | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.4.1 | Management Session Connect event. When a new session is detected, the event occurs. | ||
| NTF sheSystemManagementSessionDisconnection | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.4.2 | Management Session Disonnect event. When an existing session is diconnected, the event occurs. In case of SNMP sessions, when SNMP aging timer is expired, disconnection decision. | ||
| NTF sheSystemManagementSessionChangedSnmpAgingTime | 1.3.6.1.4.1.231.7.1.2.2.1.2.7.4.3 | SNMP Management Session Aging Time Change Event. | ||
| sheSystemConfigLog | 1.3.6.1.4.1.231.7.1.2.2.1.2.8 | |||
| sheSystemConfigLogGroup | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.1 | |||
| I32 sheSystemConfigLogEntryNumber | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.1.1 | Integer32 | read-only | The number of the configuration log entries to keep. 0: disable configuration logging |
| IP sheSystemConfigLogFtpServerAddress | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.1.2 | IpAddress | read-only | FTP server's IP address to which log file will be transferred. Default:0.0.0.0 0.0.0.0: disable FTP transfer |
| OCT sheSystemConfigLogFtpUser | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.1.3 | OCTET STRING | read-only | User ID for FTP server. Merge-Info: Element is not needed. Read-access will report an empty string. |
| OCT sheSystemConfigLogFtpPassword | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.1.4 | OCTET STRING | read-only | Password for FTP server. Merge-Info: Element is not needed. Read-access will report an empty string. |
| I32 sheSystemConfigLogFtpInterval | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.1.5 | Integer32 | read-only | Timer interval between FTP transfers of log in second 0: disable FTP transfer |
| OCT sheSystemConfigLogFtpPathName | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.1.6 | OCTET STRING | read-only | Path name of file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). |
| sheSystemConfigLogControl | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2 | |||
| SHE sheSystemConfigLogControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.1 | SheSystemConfigLogControlRequestType | read-write | Config log global user commands |
| I32 sheSystemConfigLogControlEntryNumber | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.2 | Integer32 | read-write | The number of the configuration log entries to keep |
| IP sheSystemConfigLogControlFtpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.3 | IpAddress | read-write | FTP server's IP address to which log file will be transferred |
| OCT sheSystemConfigLogControlFtpUser | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.4 | OCTET STRING | read-write | User ID for FTP server. Read-access will report an empty string. |
| OCT sheSystemConfigLogControlFtpPassword | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.5 | OCTET STRING | read-write | Password for FTP server. Read-access will report an empty string. |
| I32 sheSystemConfigLogControlFtpInterval | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.6 | Integer32 | read-write | Timer interval between FTP transfers of log in second 0: disable FTP transfer |
| OCT sheSystemConfigLogControlFtpPathName | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.7 | OCTET STRING | read-write | Path name of file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). |
| SHE sheSystemConfigLogControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.8 | SheSystemControlRequestResultType | read-only | The result of the last user command. |
| SHE sheSystemConfigLogControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.9 | SheControlStatusType | read-only | The status of a control request. |
| U32 sheSystemConfigLogControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.10 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| sheSystemConfigLogNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.3 | |||
| NTF sheSystemConfigLogEntryNumberChanged | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.3.1 | Config entry number to keep is changed. | ||
| NTF sheSystemConfigLogFtpLoginInfoChanged | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.3.2 | FTP server address and login information is changed. | ||
| NTF sheSystemConfigLogFtpIntervalChanged | 1.3.6.1.4.1.231.7.1.2.2.1.2.8.3.3 | Timer interval is changed. | ||
| sheSystemAutoConfigBackup | 1.3.6.1.4.1.231.7.1.2.2.1.2.9 | |||
| sheSystemAutoConfigBackupGroup | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.1 | |||
| T/F sheSystemAutoConfigBackupEnabled | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.1.1 | TruthValue | read-only | Enable/disable auto configuration backup feature true: enable false: disable |
| IP sheSystemAutoConfigBackupFtpServerAddress | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.1.2 | IpAddress | read-only | FTP server's IP address to which config file will be transferred. Default:0.0.0.0 0.0.0.0: disable FTP transfer |
| OCT sheSystemAutoConfigBackupFtpUser | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.1.3 | OCTET STRING | read-only | User ID for FTP server |
| OCT sheSystemAutoConfigBackupFtpPassword | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.1.4 | OCTET STRING | read-only | Password for FTP server |
| OCT sheSystemAutoConfigBackupFtpPathName | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.1.5 | OCTET STRING | read-only | Path name of file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ) Default: / |
| I32 sheSystemAutoConfigBackupTime | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.1.6 | Integer32 | read-only | It indicates a time that ftp backup should be performed since autoconfiguration has been set. |
| sheSystemAutoConfigBackupControl | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.2 | |||
| SHE sheSystemAutoConfigBackupControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.2.1 | SheSystemAutoConfigBackupControlRequest | read-write | AutoConfigBackup global user commands |
| T/F sheSystemAutoConfigBackupControlEnabled | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.2.2 | TruthValue | read-write | Enable/disable auto configuration backup feature true: enabled false: disabled |
| IP sheSystemAutoConfigBackupControlFtpServerAddress | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.2.3 | IpAddress | read-write | FTP server's IP address to which config file will be transferred. |
| OCT sheSystemAutoConfigBackupControlFtpUser | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.2.4 | OCTET STRING | read-write | User ID for FTP server |
| OCT sheSystemAutoConfigBackupControlFtpPassword | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.2.5 | OCTET STRING | read-write | Password for FTP server |
| OCT sheSystemAutoConfigBackupControlFtpPathName | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.2.6 | OCTET STRING | read-write | Path name of file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Default: / |
| I32 sheSystemAutoConfigBackupControlBackupTime | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.2.7 | Integer32 | read-write | It indicates a time that ftp backup should be performed since autoconfiguration has been set. |
| sheSystemAutoConfigBackupNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.3 | |||
| NTF sheSystemAutoConfigBackupEnabledChanged | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.3.1 | Auto configuration backup is enabled or disabled. | ||
| NTF sheSystemAutoConfigBackupFtpLoginInfoChanged | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.3.2 | FTP server address and login information is changed. | ||
| NTF sheSystemAutoConfigBackupTimeChanged | 1.3.6.1.4.1.231.7.1.2.2.1.2.9.3.3 | Config backup time is changed. | ||
| sheSystemSnmp | 1.3.6.1.4.1.231.7.1.2.2.1.2.10 | |||
| U32 sheSystemNotificationCounter | 1.3.6.1.4.1.231.7.1.2.2.1.2.10.1 | Unsigned32 | read-only | Number of last sended notification. This OID is last member of each sended notification from SHE NE. A TMN system should now be able to check, if all notification were received and if not a consistency check could be performed. |
| sheSystemMaintenance | 1.3.6.1.4.1.231.7.1.2.2.1.2.11 | |||
| sheSystemSwMaintenance | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1 | |||
| sheSystemSwMaintenanceBase | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.1 | |||
| OCT sheSystemSwmSapsServerAddr | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.1.1 | OCTET STRING | read-only | Address of SAPS FTP server (dotted notation). |
| OCT sheSystemSwmSapsPathName | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.1.2 | OCTET STRING | read-only | Path name of SAPS file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Spaces in pathnames are not allowed, because of possible problems with different FTP implementations (client and/or server)!! |
| OCT sheSystemSwmSapsFileName | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.1.3 | OCTET STRING | read-only | File name of SAPS file on FTP server. Spaces in filenames are not allowed, because of possible problems with different FTP implementations (client and/or server)!! |
| SHE sheSystemSwmAdminState | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.1.4 | SheSystemAdminState | read-only | This state describes the current usage of automatic sw upgrade. The following states are supported: unlocked(1) -> saps handling used locked(2) -> saps handling not used (default) Important Note: If the automatic sw upgrade system is enabled, the sheSystemFileControl group for single sw upgrades is always busy!! If a sw upgrade should be start for a single Card or a single card type, the sheSystemSwmAdminState has to be locked and then the sheSystemFileControl could be used! |
| SHE sheSystemSwmCurrentStatus | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.1.5 | SheSystemSwmCurrentStatusType | read-only | This parameter describes the current status of automatic sw upgrade process. The following states are supported: passive(1) -> saps handling disabled (default) or saps handling enabled but last request failed started(2) -> saps handling enabled, start loading S-APS file active(3) -> saps handling enabled and running |
| sheSystemSwMaintenanceTaskTable | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.2 | not-accessible | Table of the current active or failed tasks of SW upgrade. This table is used to display the automatic upgrade status for single plugin units at the TMN. | |
| sheSystemSwMaintenanceTaskEntry | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.2.1 | not-accessible | Entry of the SW upgrade task table. | |
| U32 sheSystemSwmTIndex | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.2.1.1 | Unsigned32 | read-only | Unique value to identify an entry of this table. |
| SHE sheSystemSwmTCardType | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.2.1.2 | SheCardType | read-only | Indicates the plug-in unit type to be upgraded. |
| PHY sheSystemSwmTEntPhysicalIndex | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.2.1.3 | PhysicalIndex | read-only | The entPhysicalIndex of PIU to be loaded. |
| U32 sheSystemSwmTTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.2.1.4 | Unsigned32 | read-only | The time stamp of the task. It is updated anytime the upgrade task state changes. |
| NUM sheSystemSwmTUpgradeState | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.2.1.5 | SheSystemMaintenanceControlReqResult | read-only | Identifies the current processing state of the upgrade task: - sutInitialized - sutToDo - sutStarted - sutCrashed - sutFtpDone - sutDone - sutReadyForReset - sutResetInProgress - sutObsolete |
| NUM sheSystemSwmTUpgradeResult | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.2.1.6 | SheSystemMaintenanceControlReqResult | read-only | This read-only attribute informs about the result of the performed upgrade (in case of failed upgrade the error reason). |
| OCT sheSystemSwmTSwVersion | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.2.1.7 | OCTET STRING | read-only | String containing the APS version which is loaded into the plug-in unit. |
| OCT sheSystemSwmTSwVersionNeed | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.2.1.8 | OCTET STRING | read-only | String containing the APS version which should be loaded into the plug-in unit. |
| sheSystemSwMaintenanceControl | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.3 | |||
| NUM sheSystemSwmControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.3.1 | SheSystemMaintenanceControlReq | read-write | SW upgrade command requests from TMN. setSystemMaintenanceBase(50), - Set needed ftp access information for automatic SAPS request's. notifications: sheSystemSwmBaseSet setSwmAdminState(51), - lock or unlock the automatic saps system notifications: sheSystemSwmBaseAdminStateSet sheSystemReadSAPSContentFileReady (if set to unlock) sheSystemSwmFTPError (if ftp could not reached) swmUpgrStartRequest(100), - start new upgrade procedure including automatic load activation notifications: sheSystemSwmFTPError sheSystemSwmUpgradeStartResult swmUpgrStartRequestNoReset(101), - start new upgrade procedure without automatic load activation notifications: sheSystemSwmReadyForReset sheSystemSwmFTPError sheSystemUpgradeCanceled (bad case only) sheSystemSwmUpgradeStartResult swmReadSAPSContentFile(102), - start request of new SAPS file from server, no download action is started notification: sheSystemReadSAPSContentFileReady sheSystemSwmFTPError |
| SHE sheSystemSwmControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.3.2 | SheControlStatusType | read-only | The status of the current request. |
| U32 sheSystemSwmControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.3.3 | Unsigned32 | read-only | Wait time in seconds after complete upgrade for a unit type. |
| NUM sheSystemSwmControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.3.4 | SheSystemMaintenanceControlReqResult | read-only | The result of the last user command. |
| U32 sheSystemSwmControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.3.5 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| OCT sheSystemSwmControlSapsServerAddr | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.3.6 | OCTET STRING | read-write | Address of SAPS FTP server (dotted notation). |
| OCT sheSystemSwmControlSapsPathName | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.3.7 | OCTET STRING | read-write | Path name of SAPS file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Spaces in pathnames are not allowed, because of possible problems with different FTP implementations (client and/or server)!! |
| OCT sheSystemSwmControlSapsFileName | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.3.8 | OCTET STRING | read-write | File name of SAPS file on FTP server. Spaces in filenames are not allowed, because of possible problems with different FTP implementations (client and/or server)!! |
| OCT sheSystemSwmControlSapsUsrName | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.3.9 | OCTET STRING | read-write | Username for SAPS FTP access. Read-access to this attribute will deliver 20 times sign '-' |
| OCT sheSystemSwmControlSapsPassword | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.3.10 | OCTET STRING | read-write | Password for SAPS FTP access. Read-access to this attribute will deliver 20 times sign '-' |
| SHE sheSystemSwmControlAdminState | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.3.11 | SheSystemAdminState | read-write | This set the current usage of automatic sw upgrade. The following states are supported: unlocked(1) -> saps handling used locked(2) -> saps handling not used (default) |
| sheSystemSwMaintenanceNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.4 | |||
| NTF sheSystemSwmBaseSet | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.4.1 | Configuration trap for SAPS basic ftp access settings. | ||
| NTF sheSystemSwmAdminStateSet | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.4.2 | Configuration trap for SAPS basic admin state settings. | ||
| NTF sheSystemReadSAPSContentFileReady | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.4.3 | Result trap for request of new SAPS file from server. | ||
| NTF sheSystemSwmReadyForReset | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.4.4 | Trap will be send after succesfull SwUpgrade for a single card if a sw upgrade was started without automatic load activation. | ||
| NTF sheSystemSwmFTPError | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.4.5 | Result trap for sw upgrade FTP access. | ||
| NTF sheSystemSwmUpgradeStartResult | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.4.6 | Configuration result trap for long running command. | ||
| NTF sheSystemSwmCurrentStatusChanged | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.4.7 | The current operational status of the automatic sw upgrade process changed. | ||
| sheSystemSwMaintenanceAlarms | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.5 | |||
| NTF sheSystemSwmFtpAccessError | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.5.1 | Alarm will be set because of failures during read or write during the NE internal FTP communication. A successful ftp process will clear this alarm. Alarm will be used by manual download and automatic saps upgrade. | ||
| NTF sheSystemSwmFtpExternalAccessError | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.5.2 | Alarm will be set because of failures during read or write during the NE external FTP communication (access to external ftp server failed). A successful ftp process will clear this alarm. Alarm will be used by manual download and automatic saps upgrade. | ||
| NTF sheSystemSwmStatusError | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.1.5.3 | Alarm will be set because of failures during automatic sw upgrade process which force a temporary switch off for this process. A restart could be triggered by the following command's: setSwmAdminState(51) swmUpgrStartRequest(100) swmUpgrStartRequestNoReset(101) | ||
| sheSystemDbMaintenance | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2 | |||
| sheSystemDbMaintenanceBase | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.1 | |||
| OCT sheSystemDbmServerAddr | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.1.1 | OCTET STRING | read-only | Address of DB FTP server (dotted notation). |
| OCT sheSystemDbmPathName | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.1.2 | OCTET STRING | read-only | Path name of DB backup files on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Spaces in pathnames are not allowed, because of possible problems with different FTP implementations (client and/or server)!! |
| SHE sheSystemDbmRemoteBackupAdminState | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.1.3 | SheSystemAdminState | read-only | This state describes the current usage of automatic remote db backup. The following states are supported: unlocked(1) -> remote db backup handling used locked(2) -> remote db backup handling not used (default) |
| U32 sheSystemDbmBackupStartTime | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.1.4 | Unsigned32 | read-only | Start time basis for remote DB backup after system restart, backup timer reconfigurations or system clock reset. The first backup will be started at this time + sheSystemDbmBackupPeriod and will then be repeated each sheSystemDbmBackupPeriod. Range: 0 (0 am) .. 1439 (23.59 pm). Default: 0 Reminder: NE uses always a UTC time base. |
| U32 sheSystemDbmBackupPeriod | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.1.5 | Unsigned32 | read-only | Interval between two remote backup operations in hours. Backup is started only if there were relevant configuration changes during the last period. Default: 24 hours |
| U32 sheSystemDbmBackupWaitingPeriod | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.1.6 | Unsigned32 | read-only | Waiting period in minutes before next local backup, in case of configuration changes. Default value : 5 minutes. |
| U32 sheSystemDbmBackupMaxFileNumber | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.1.7 | Unsigned32 | read-only | This number describes the maximum set of different backup files on the remote ftp site. Default number is 5. |
| SHE sheSystemDbmLocalBackupAdminState | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.1.8 | SheSystemAdminState | read-only | This value administrate the automatic local db backup after sheSystemDbmBackupWaitingPeriod in case of configuration actions. Default: unlocked (automatic local backup is enabled) |
| sheSystemDbBackupFilesTable | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.2 | not-accessible | Table shows the DB backup files at the FTP server with time and date of their creation. The table is empty per default and can be updated with user command refreshDbBackupFilesTable. This command searches all existing DB backup files at the FTP server. | |
| sheSystemDbBackupFilesEntry | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.2.1 | not-accessible | Entry of the xldv20DbBackupFilesTable. Notifications : . | |
| U32 sheSystemDbBackupFileIndex | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.2.1.1 | Unsigned32 | read-only | Unique value to identify an entry of this table. |
| STR sheSystemDbBackupFileName | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.2.1.2 | DisplayString | read-only | The name of the DB backup file. |
| U32 sheSystemDbBackupFileTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.2.1.3 | Unsigned32 | read-only | The time stamp of the DB backup file, i.e. the time and date when the DB backup file has been created. |
| sheSystemDbmControl | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3 | |||
| NUM sheSystemDbmControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.1 | SheSystemMaintenanceControlReq | read-write | Database Management commands : setSystemMaintenanceBase: - Set needed ftp access information for automatic DB request's. notifications: sheSystemDbmBaseSet backupDb : - The command for a manual database backup into the FEPROM of the DSLAM and to the FTP server. The return value commExecStarted indicates the beginning of DB storage. notification: sheSystemDbmResult refreshDbBackupFilesTable : - The DSLAM supports several backup files. The command retrieves the backup files at the FTP server and provides their file names and time and date of creation in the table sheSystemDbBackFilesTable. notification: sheSystemRefreshDbmBackupFilesTable dbReloadSpecificFile: - Reload a specific file from sheSystemDbBackFilesTable into the DSLAM. If successful, the CXU perform a reset for activation. notification: sheSystemDbmResult setBackupPeriod: - Configure the backup period settings for automatic remote backup to ftp server and local backup to EEPROM. notification: sheSystemDbmBackupPeriodSet setLocalBackupAdminState: - Enables or disables the automatic local backup feature. notification: sheSystemDbmLocalBackupAdminstateSet setRemoteBackupAdminState: - Enables or disables the automatic remote backup feature. notification: sheSystemDbmRemoteBackupAdminstateSet |
| SHE sheSystemDbmControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.2 | SheControlStatusType | read-only | The status of the control request. |
| U32 sheSystemDbmControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.3 | Unsigned32 | read-only | The maximum wait time for the manager when a DB storage request cannot be executed immediately (value commExecStarted in the result attribute sheSystemMaintenanceControlReqResult). The manager reads this value from the DSLAM. The end of request indicates the trap sheSystemTrDbBackup. |
| NUM sheSystemDbmControlReqResultLocal | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.4 | SheSystemMaintenanceControlReqResult | read-only | The result of the local backup request. |
| NUM sheSystemDbmControlReqResultRemote | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.5 | SheSystemMaintenanceControlReqResult | read-only | The result of the last remote backup request. |
| U32 sheSystemDbmControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| OCT sheSystemDbmControlServerAddr | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.7 | OCTET STRING | read-write | Address of DB FTP server (dotted notation). |
| OCT sheSystemDbmControlPathName | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.8 | OCTET STRING | read-write | Path name of DB backup files on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Spaces in pathnames are not allowed, because of possible problems with different FTP implementations (client and/or server)!! |
| OCT sheSystemDbmControlUsrName | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.9 | OCTET STRING | read-write | Username for DB backup FTP access. Read-access to this attribute will deliver 20 times sign '-' |
| OCT sheSystemDbmControlPassword | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.10 | OCTET STRING | read-write | Password for DB backup FTP access. Read-access to this attribute will deliver 20 times sign '-' |
| SHE sheSystemDbmControlRemoteBackupAdminState | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.11 | SheSystemAdminState | read-write | This set the current usage of automatic remote db backup. The following states are supported: unlocked(1) -> remote db backup handling used locked(2) -> remote db backup handling not used (default) |
| U32 sheSystemDbmControlBackupStartTime | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.12 | Unsigned32 | read-write | Start time basis for remote DB backup after system restart, backup timer reconfigurations or system clock reset. The first backup will be started at this time + sheSystemDbmBackupPeriod and will then be repeated each sheSystemDbmBackupPeriod. Range: 0 (0 am) .. 1439 (23.59 pm). Reminder: NE uses always a UTC time base. |
| U32 sheSystemDbmControlBackupPeriod | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.13 | Unsigned32 | read-write | Interval between two remote backup operations in hours. Backup is started only if there were relevant configuration changes during the last period. |
| U32 sheSystemDbmControlBackupWaitingPeriod | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.14 | Unsigned32 | read-write | Waiting period in minutes before next local backup, in case of configuration changes. |
| U32 sheSystemDbmControlBackupMaxFileNumber | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.15 | Unsigned32 | read-write | This number describes the maximum set of different backup files on the remote ftp site. |
| SHE sheSystemDbmControlLocalBackupAdminState | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.16 | SheSystemAdminState | read-write | This value administrate the automatic local db backup after sheSystemDbmBackupWaitingPeriod in case of configuration actions. Default: unlocked (automatic local backup is enabled) |
| I32 sheSystemDbmControlBackupFileIndex | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.3.17 | Integer32 | read-write | The index selects the DB backup file in the sheSystemDbBackupFilesTable which shall be loaded into the DSLAM from the FTP server with user command dbReloadSpecificFile. |
| sheSystemDbMaintenanceNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.4 | |||
| NTF sheSystemDbmBaseSet | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.4.1 | Configuration trap for remote DB basic access settings. | ||
| NTF sheSystemDbmResult | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.4.3 | Indicates the end and the result of the database backup or restore. | ||
| NTF sheSystemDbmBackupFilesTableRefreshed | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.4.4 | Indicates end of user command refreshDbmBackupFilesTable. | ||
| NTF sheSystemDbmBackupPeriodSet | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.4.5 | Settings for automatic backup period are set. | ||
| NTF sheSystemDbmLocalBackupAdminstateSet | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.4.6 | Configuration notification for local db backup. | ||
| NTF sheSystemDbmRemoteBackupAdminstateSet | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.4.7 | Configuration notification for local db backup. | ||
| sheSystemDbMaintenanceAlarms | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.5 | |||
| NTF sheSystemLocalDbInvalid | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.5.1 | Alarm will be set if the local DB is invalid because of failures during read/write local DB or if the local DB was not updated yet after a configuration sequence. | ||
| NTF sheSystemRemoteDbInvalid | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.5.2 | Alarm will be set if the remote DB is invalid because of failures during read/write remote DB or if the remote DB was not updated yet after a configuration sequence. | ||
| NTF sheSystemDbFtpAccessError | 1.3.6.1.4.1.231.7.1.2.2.1.2.11.2.5.3 | Alarm will be set because of failures during read or write on DB Ftp server. | ||
| sheSystemIpConfig | 1.3.6.1.4.1.231.7.1.2.2.1.2.12 | |||
| sheSystemIpHostTable | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.1 | not-accessible | This table contains attributes for each IP host interface. | |
| sheSystemIpHostEntry | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.1.1 | not-accessible | An entry represents a set of configurations in sheSystemIpHostTable. | |
| U32 sheSystemIpHostIndex | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.1.1.1 | Unsigned32 | read-only | Table index. Each index uniquely identifies one Ip host table entry. |
| STR sheSystemIpHostName | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.1.1.2 | DisplayString | read-only | A descriptional name that uniquely identifies a entry of this table. The name is selected by the NE and identify the interface also on CLI. |
| SHE sheSystemIpHostUseDhcp | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.1.1.3 | SheSystemIpHostUseDhcpType | read-only | Either to use Dhcp or not. If set to 0 (default) no DHCP will be used. Valid values: noUseDhcp(0), useDhcp(1) Note: Currently no support planed. |
| IP sheSystemIpHostIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.1.1.4 | IpAddress | read-only | IpAddress. Assigned by operator request or by DHCP if used. |
| IP sheSystemIpHostSubnetMask | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.1.1.5 | IpAddress | read-only | subnet mask |
| U32 sheSystemIpHostOuterVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.1.1.6 | Unsigned32 | read-only | The host vlan for this ip interface which should be used as outer tag in double tagging mode or in single tagging mode. Set to 0 if no host VLAN should be used. |
| U32 sheSystemIpHostInnerVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.1.1.7 | Unsigned32 | read-only | The host vlan for this ip interface which should be used as inner tag if the NE run in double tagging mode. Set to 0 if no host VLAN should be used or if the NE uses single tag mode. |
| OCT sheSystemIpHostDescription | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.1.1.8 | OCTET STRING | read-only | Could describe who uses this ip interface. This description could be used by the operator to store information about the intended interface usage. The parameter will not be evaluated by the NE. |
| U32 sheSystemIpHostOuterVlanPriority | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.1.1.9 | Unsigned32 | read-only | The used .1p priority for host vlan of this ip interface which should be used as outer tag in double tagging mode or in single tagging mode. Setting is don't care if no host VLAN should be used. New with R2.8 maintenance. |
| U32 sheSystemIpHostInnerVlanPriority | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.1.1.10 | Unsigned32 | read-only | The used .1p priority for host vlan of this ip interface which should be used as inner tag if the NE run in double tagging mode. Setting is don't care if no host VLAN should be used. New with R2.8 maintenance. |
| sheSystemIpHostControl | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.2 | |||
| SHE sheSystemIpHostControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.2.1 | SheSystemIpControlReqType | read-write | The request of a user command. createSystemIpHost (50) sheSystemIpHostControlUseDhcp sheSystemIpHostControlIpAddress sheSystemIpHostControlSubnetMask sheSystemIpHostControlOuterVlanId sheSystemIpHostControlInnerVlanId sheSystemIpHostControlDescription sheSystemIpHostControlOuterVlanPriority (new with R2.8 maintenance) sheSystemIpHostControlInnerVlanPriority (new with R2.8 maintenance) deleteSystemIpHost (51), sheSystemIpHostControlIndex modifySystemIpHost (52), sheSystemIpHostControlIndex sheSystemIpHostControlUseDhcp sheSystemIpHostControlIpAddress sheSystemIpHostControlSubnetMask sheSystemIpHostControlOuterVlanId sheSystemIpHostControlInnerVlanId sheSystemIpHostControlDescription sheSystemIpHostControlOuterVlanPriority (new with R2.8 maintenance) sheSystemIpHostControlInnerVlanPriority (new with R2.8 maintenance) |
| U32 sheSystemIpHostControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.2.2 | Unsigned32 | read-write | Table index |
| SHE sheSystemIpHostControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.2.3 | SheControlStatusType | read-only | The status of a user command. |
| SHE sheSystemIpHostControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.2.4 | SheSystemControlRequestResultType | read-only | The result of the last user command. |
| G32 sheSystemIpHostControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.2.5 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| U32 sheSystemIpHostControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.2.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| STR sheSystemIpHostControlName | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.2.7 | DisplayString | read-only | A descriptional name that uniquely identifies an entry of this table. This name was selected by the NE and identifies the interface also on CLI. |
| SHE sheSystemIpHostControlUseDhcp | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.2.8 | SheSystemIpHostUseDhcpType | read-write | Either to use Dhcp or not. If set to 0 (default) no DHCP will be used. Valid values: noUseDhcp(0), useDhcp(1) Note: Currently no support planed. |
| IP sheSystemIpHostControlIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.2.9 | IpAddress | read-write | Ipaddress if no Dhcp is used. |
| IP sheSystemIpHostControlSubnetMask | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.2.10 | IpAddress | read-write | Subnet mask |
| U32 sheSystemIpHostControlOuterVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.2.11 | Unsigned32 | read-write | The host vlan for this ip interface which should be used as outer tag in double tagging mode or in single tagging mode. Set to 0 if no host VLAN should be used. |
| U32 sheSystemIpHostControlInnerVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.2.12 | Unsigned32 | read-write | The host vlan for this ip interface which should be used as inner tag if the NE run in double tagging mode. Set to 0 if no host VLAN should be used or if the NE uses single tag mode. |
| OCT sheSystemIpHostControlDescription | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.2.13 | OCTET STRING | read-write | Could describe who uses this ip interface. This description could be used by the operator to store information about the intended interface usage. The parameter will not be evaluated by the NE. |
| U32 sheSystemIpHostControlOuterVlanPriority | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.2.14 | Unsigned32 | read-write | The used .1p priority for host vlan of this ip interface which should be used as outer tag in double tagging mode or in single tagging mode. Setting is don't care if no host VLAN should be used. New with R2.8 maintenance. |
| U32 sheSystemIpHostControlInnerVlanPriority | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.2.15 | Unsigned32 | read-write | The used .1p priority for host vlan of this ip interface which should be used as inner tag if the NE run in double tagging mode. Setting is don't care if no host VLAN should be used. New with R2.8 maintenance. |
| sheSystemIpRouteTable | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.3 | not-accessible | This table contains attributes for each static configured IP route. Learned routes from routing protocols will not be shown here! | |
| sheSystemIpRouteEntry | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.3.1 | not-accessible | An entry represents a set of configurations in sheSystemIpRouteTable. | |
| U32 sheSystemIpRouteIndex | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.3.1.1 | Unsigned32 | read-only | Table index. Each index uniquely identifies one an Ip route table entry. |
| STR sheSystemIpRouteName | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.3.1.2 | DisplayString | read-only | A describable name that uniquely identifies an entry of this table. The name is user specified. Special characters like space ? . are not allowed. |
| IP sheSystemIpRouteDestIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.3.1.4 | IpAddress | read-only | Destination IpAddress for this route. |
| IP sheSystemIpRouteSubnetMask | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.3.1.5 | IpAddress | read-only | subnet mask |
| IP sheSystemIpRouteGatewayIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.3.1.6 | IpAddress | read-only | Gateway IpAddress for this route. |
| I32 sheSystemIpRouteMetric | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.3.1.7 | Integer32 | read-only | The routing metric for this route. If this metric is not used, its value should be set to -1. |
| sheSystemIpRouteControl | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.4 | |||
| SHE sheSystemIpRouteControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.4.1 | SheSystemIpControlReqType | read-write | The request of a user command. createSystemIpRoute (55), sheSystemIpRouteControlName sheSystemIpRouteControlDestIpAddress sheSystemIpRouteControlGatewayIpAddress sheSystemIpRouteControlSubnetMask sheSystemIpRouteControlMetric deleteSystemIpRoute (56), sheSystemIpRouteControlIndex modifySystemIpRoute (57), sheSystemIpRouteControlIndex sheSystemIpRouteControlDestIpAddress sheSystemIpRouteControlGatewayIpAddress sheSystemIpRouteControlSubnetMask sheSystemIpRouteControlMetric |
| U32 sheSystemIpRouteControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.4.2 | Unsigned32 | read-write | Table index |
| SHE sheSystemIpRouteControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.4.3 | SheControlStatusType | read-only | The status of a user command. |
| SHE sheSystemIpRouteControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.4.4 | SheSystemControlRequestResultType | read-only | The result of the last user command. |
| G32 sheSystemIpRouteControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.4.5 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| U32 sheSystemIpRouteControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.4.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| STR sheSystemIpRouteControlName | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.4.7 | DisplayString | read-write | A describable name that uniquely identifies a entry of this table. The route name is user specified. |
| IP sheSystemIpRouteControlDestIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.4.8 | IpAddress | read-write | Destination Ipaddress. |
| IP sheSystemIpRouteControlSubnetMask | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.4.9 | IpAddress | read-write | Subnet mask. |
| IP sheSystemIpRouteControlGatewayIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.4.10 | IpAddress | read-write | Gateway Ipaddress . |
| I32 sheSystemIpRouteControlMetric | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.4.11 | Integer32 | read-write | The routing metric for this route. If this metric is not used, its value should be set to -1. |
| sheSystemIpHostNotification | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.5 | |||
| NTF sheSystemIpHostCreated | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.5.1 | Configuration trap. | ||
| NTF sheSystemIpHostDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.5.2 | Configuration trap. | ||
| NTF sheSystemIpHostModified | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.5.3 | Configuration trap. | ||
| NTF sheSystemIpRouteCreated | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.5.4 | Configuration trap. | ||
| NTF sheSystemIpRouteDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.5.5 | Configuration trap. | ||
| NTF sheSystemIpRouteModified | 1.3.6.1.4.1.231.7.1.2.2.1.2.12.5.6 | Configuration trap. | ||
| sheSystemConformance | 1.3.6.1.4.1.231.7.1.2.2.1.2.100 | |||
| sheSystemGroups | 1.3.6.1.4.1.231.7.1.2.2.1.2.100.1 | |||
| sheSystemGroup | 1.3.6.1.4.1.231.7.1.2.2.1.2.100.1.1 | |||
| sheSystemControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.2.100.1.2 | |||
| sheSystemNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.2.100.1.3 | |||
| sheSystemIpGroup | 1.3.6.1.4.1.231.7.1.2.2.1.2.100.1.4 | Description. | ||
| sheSystemIpNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.2.100.1.5 | Description. | ||
| sheSystemObsoleteGroup | 1.3.6.1.4.1.231.7.1.2.2.1.2.100.1.6 | Description. | ||
| sheSystemObsoleteNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.2.100.1.7 | Description. | ||
| sheSystemCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.2.100.2 | |||
| sheSystemCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.2.100.2.1 | The compliance statement for SNMP entities which manage VDSL interfaces in SHE. |
RFC description
Nokia Siemens system management MIB defining global configuration, file management, and SNMP settings for network elements.
Start monitoring Nokia Siemens Networks SHE DSLAM, fixed-line broadband access equipment (system config/NTP/file-management status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.