-- -- she-system-mib.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 -- Wednesday, February 04, 2009 at 14:03:20 -- -- Start of ClearCase branch-information of current release: -- she-system-mib.mib /main/she_main_grf/28 -- End of ClearCase branch-information. SHE-SYSTEM-MIB DEFINITIONS ::= BEGIN IMPORTS she FROM AN-SHE-MIB entPhysicalIndex, PhysicalIndex FROM ENTITY-MIB sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity FROM SHE-ALARMING-MIB SheControlStatusType, SheCardType, SheSystemFileIndexType FROM SHE-TC-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF TimeTicks, IpAddress, Integer32, Unsigned32, Gauge32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC; -- 1.3.6.1.4.1.231.7.1.2.2.1.2 sheSystem MODULE-IDENTITY LAST-UPDATED "200902041300Z" -- February 04, 2009 at 13:00 GMT ORGANIZATION "Nokia Siemens Networks" CONTACT-INFO "Gerd Barchmann COO BBA DSLAM RD SDE gerd.barchmann@nsn.com +49 3834 555654" DESCRIPTION " Definition of system global information and configuration, e.g. configuration of external time, snmp configuration file management for up and download of - loads, - configuration files - errorlog - remote inventory - performance data file - snmp configuration file " REVISION "200410071000Z" -- October 07, 2004 at 10:00 GMT DESCRIPTION "Add managed objects as to TimeZone" REVISION "200411241439Z" -- November 24, 2004 at 14:39 GMT DESCRIPTION "IUS Release 2. Correct access for sheSystemControlExternalTime." REVISION "200412081000Z" -- December 08, 2004 at 10:00 GMT DESCRIPTION "Change Description for sheSystemVersion." REVISION "200412201413Z" -- December 20, 2004 at 14:13 GMT DESCRIPTION "Change the description for the possible values of sheSystemVersion string." REVISION "200608221505Z" -- August 22, 2006 at 15:05 GMT DESCRIPTION "Take over by Gerd Barchmann for R2.5." REVISION "200609131512Z" -- September 13, 2006 at 15:12 GMT DESCRIPTION "Correct description for some sheSystemConfigLogFtp - parameters. Username and password could never be readout via snmp if. Correct spelling of variables in sheSystemSwmControl." REVISION "200611201222Z" -- November 20, 2006 at 12:22 GMT DESCRIPTION "Correct some names and definitions for backward compatibility. Add ControlReqResult and ControlReqStatus to sheSystemConfigLogControl. Correct SheSystemDnsServerNameControlRequestType." REVISION "200612061203Z" -- December 06, 2006 at 12:03 GMT DESCRIPTION "Add group sheSystemAutoConfigBackup for backward compatibility. Will not be supported by R2.5." REVISION "200701120952Z" -- January 12, 2007 at 09:52 GMT DESCRIPTION "Add new system-version string." REVISION "200703301055Z" -- March 30, 2007 at 10:55 GMT DESCRIPTION "Add new system-version string for R2.5.2. Add new tables for configuration of IP host and static routes via snmp." REVISION "200704161524Z" -- April 16, 2007 at 15:24 GMT DESCRIPTION "Expand sheSystemFileControlTypeOfFile for alarmLog and uptimeLog." REVISION "200704251330Z" -- April 25, 2007 at 13:30 GMT DESCRIPTION "Modify SheSystemIpHostTable after late review comment." REVISION "200705111256Z" -- May 11, 2007 at 12:56 GMT DESCRIPTION "Modify sheSystemIpHostTable and change ..Usage attribute to ..Description." REVISION "200705241036Z" -- May 24, 2007 at 10:36 GMT DESCRIPTION "Remove index limits for IpHost- and IpRoute-table." REVISION "200706111601Z" -- June 11, 2007 at 16:01 GMT DESCRIPTION "Replace system-version string R2.5.2 with R2.6." REVISION "200708151046Z" -- August 15, 2007 at 10:46 GMT DESCRIPTION "Modify unit and range for sheSystemNtpClientXmitInterval and sheSystemNtpClientControlXmitInterval." REVISION "200710161349Z" -- October 16, 2007 at 13:49 GMT DESCRIPTION "Add new system version R2.7 and R2.8." REVISION "200711141534Z" -- November 14, 2007 at 15:34 GMT DESCRIPTION "Add new system version hiX5622/R1.0. Modify comment for sheSystemIpHostUseDhcp." REVISION "200711271040Z" -- November 27, 2007 at 10:40 GMT DESCRIPTION "Add systemversion string for R3.0." REVISION "200712051242Z" -- December 05, 2007 at 12:42 GMT DESCRIPTION "Add metric parameter to interface route table (CO hiX13598)." REVISION "200802221125Z" -- February 22, 2008 at 11:25 GMT DESCRIPTION "Correct missing Object list for swm externalFtpAccessAlarm." REVISION "200804091448Z" -- April 09, 2008 at 14:48 GMT DESCRIPTION "Expand valid range for TimeZone configuration." REVISION "200805141009Z" -- May 14, 2008 at 10:09 GMT DESCRIPTION "Add new system version string for R2.6S2, R2.7M and R2.8M." REVISION "200805281534Z" -- May 28, 2008 at 15:34 GMT DESCRIPTION "Modify valid values for Timezone configuration." REVISION "200806111116Z" -- June 11, 2008 at 11:16 GMT DESCRIPTION "Support new file request type for upload of all available inventory records." REVISION "200806301036Z" -- June 30, 2008 at 10:36 GMT DESCRIPTION "Add new system versions for feature specific versions of R2.7M." REVISION "200807231607Z" -- July 23, 2008 at 16:07 GMT DESCRIPTION "Add systemSwmCurrentStatus with changed and alarm trap." REVISION "200810221620Z" -- October 22, 2008 at 16:20 GMT DESCRIPTION "Add new sytem versions represented by new shelftypes. Modify enum definition for SheSystemSwmCurrentStatusType." REVISION "200901211308Z" -- January 21, 2009 at 13:08 GMT DESCRIPTION "Update systemversion information." REVISION "200902041046Z" -- February 04, 2009 at 10:46 GMT DESCRIPTION "New parameter in sheSystemIpHostTable for .1p confoguration of the used vlan's." ::= { she 2 } -- -- Type definitions -- -- -------------------------------------------------------------- -- Commands -- -------------------------------------------------------------- -- This type specifies the user commands (control requests) for -- system maintenance from the TMN-OS or LCT. SheSystemMaintenanceControlReq ::= INTEGER { noRequest(1), setSystemMaintenanceBase(50), setSwmAdminState(51), swmUpgrStartRequest(100), swmUpgrStartRequestNoReset(101), swmReadSAPSContentFile(102), backupDb(200), refreshDbBackupFilesTable(201), dbReloadSpecificFile(202), setBackupPeriod(203), setLocalBackupAdminState(204), setRemoteBackupAdminState(205) } -- -------------------------------------------------------------- -- Result -- -------------------------------------------------------------- -- This type specifies the command results (controlReqResult) -- for the system maintenance to TMN-OS or LCT. -- SheSystemMaintenanceControlReqResult ::= INTEGER { noRequest(1), ftpIpAddrFailed(11), ftpAccountFailed(12), ftpPasswdFailed(13), ftpDescPathFailed(14), commExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), sucUpgrTaskCreationFault(51), sucUpgrDbAccessFault(52), sucUpgrMissParameter(54), sucAlreadyLoaded(55), sucOk(60), sucNotOk(61), sucDbAccessFailed(62), sucCardUnlocked(63), sucTransmissionError(64), sucWrongSwVersion(65), sucUnitTypeMismatch(66), sucFtpTransError(67), sucFtpCrcError(68), sucSwHwMismatch(69), sucUpgrWrongAvState(70), sucFepromCopyFault(71), sucUpdateDescFileFailed(72), sucFtpServerNoteAvailable(73), sucFtpSendError(74), sucDbBackupFault(75), sucUpgradeComplete(76), sucUpgradeNotComplete(77), sutInitialized(100), sutToDo(101), sutStarted(102), sutCrashed(103), sutFtpDone(104), sutDone(105), sutReadyForReset(106), sutObsolete(107), sutResetInProgress(108), localBackupOk(150), remoteBackupOk(151), localBackupFailed(152), remoteBackupFailed(153), flashAccessFailed(154), dbReadFailed(155), dbmLocalBackupOk(170), dbmRemoteBackupOk(171), dbmLocalBackupFailed(172), dbmRemoteBackupFailed(173), dbmFlashAccessFailed(174), dbmDbReadFailed(175), dbmLocalBackupFileFaulty(176), dbmRemoteBackupFileFaulty(177), dbmRestoreFailed(178), dbmRestoreOk(179), dbmRefreshFailed(180), dbmRefreshOk(181) } -- The administrative state of an entity. SheSystemAdminState ::= INTEGER { unlocked(1), locked(2) } SheSystemIpControlReqType ::= INTEGER { createSystemIpHost(50), deleteSystemIpHost(51), modifySystemIpHost(52), createSystemIpRoute(55), deleteSystemIpRoute(56), modifySystemIpRoute(57) } -- The current status of an sw maintenance part. SheSystemSwmCurrentStatusType ::= INTEGER { passive(1), started(2), active(3) } -- -- Textual conventions -- -- Textual conventions -- -- type of startup SheSystemStartupType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The startup type." SYNTAX INTEGER { resetSystem(1), resetSystemWithDefault(2) } -- ----------------------------------------------------------------- -- Textual Conventions -- ----------------------------------------------------------------- SheSystemTmnConnectedType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " TMN Connected type." SYNTAX INTEGER { connected(1), disconnected(2) } SheSystemControlRequestType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type for system control commands." SYNTAX INTEGER { configureTime(1), tmnConnect(2), tmnDisconnect(3), lctConnect(4), lctDisconnect(5), writeDatatoFlash(6), configureTimeZone(7), setCPUThreshold(8), setMemoryThreshold(9) } -- GENERAL VALUES FOR USER COMMAND HANDLING -- RETURN VALUES SheSystemControlRequestResultType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The result type for system control commands." SYNTAX INTEGER { commExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), featureNotSupportedbyRelease(41) } -- type of threshold interval SheSystemThresholdIntervalType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The sampling interval for system threshold" SYNTAX INTEGER { sec5(1), sec60(2), sec600(3) } -- return values to be defined -- GENERAL VALUES FOR USER COMMAND HANDLING -- RETURN VALUES SheSystemFileControlRequestType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type for file control commands." SYNTAX INTEGER { upload(1), download(2), uploadCardsAllOfType(3), downloadCardsAllOfType(4), uploadAllOfSystem(5) } -- GENERAL VALUES FOR USER COMMAND HANDLING RETURN VALUES SheSystemFileControlRequestResultType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The result type for file control commands." SYNTAX INTEGER { ftpError(10), ftpIpAddrFailed(11), ftpAccountFailed(12), ftpPasswdFailed(13), ftpDescPathFailed(14), swLoadPromotionFailed(20), commExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37) } -- Type definition for file management SheSystemTypeOfFile ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of files which can be managed." SYNTAX INTEGER { storedLoad(1), errorLog(2), restoreFile(3), remoteInventory(4), performanceData(5), alarmLog(6), uptimeLog(7) } -- the load status type SheSystemFileLoadStatusType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The load status type." SYNTAX INTEGER { finished(1), running(2), broken(3) } -- return values to be defined -- GENERAL VALUES FOR USER COMMAND HANDLING -- RETURN VALUES SheSystemNtpClientControlRequestType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type for NtpClient control commands." SYNTAX INTEGER { enableNtpClient(1), disableNtpClient(2), changeNtpClientXmitInterval(3), addNtpClientServerName(4), deleteNtpClientServerName(5) } -- GENERAL VALUES FOR USER COMMAND HANDLING -- RETURN VALUES SheSystemNtpClientControlRequestResultType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The result type for file control commands." SYNTAX INTEGER { noRequest(1), commExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), ntpClientEnableErr(50), ntpClientDisableErr(51), ntpClientChangeXmitIntervalErr(52), ntpClientServerNameAddErr(53), ntpClientServerNameDelErr(54) } -- return values to be defined -- GENERAL VALUES FOR USER COMMAND HANDLING -- RETURN VALUES SheSystemDnsServerControlRequestType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type for DNS Server control commands." SYNTAX INTEGER { addedDnsServerName(1), deletedDnsServerName(2) } -- GENERAL VALUES FOR USER COMMAND HANDLING -- RETURN VALUES SheSystemDnsServerControlRequestResultType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The result type for file control commands." SYNTAX INTEGER { noRequest(1), commExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), dnsServerIpAddErr(60), dnsServerIpDelErr(61) } -- type of Management Session SheSystemManagementSessionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Management Session Type." SYNTAX INTEGER { telnet(1), snmp(2), ssh(3) } -- ManagementSessionControl Request SheSystemManagementSessionControlRequestType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Management Session global user commands." SYNTAX INTEGER { setSnmpSessionAgingTime(1) } -- GENERAL VALUES FOR USER COMMAND HANDLING -- ManagementSessionControl Return values SheSystemManagementSessionControlReqResultType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The result type for Management Session control commands." SYNTAX INTEGER { noRequest(1), commExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), setAgingTimeFailed(60) } -- ConfigLogControl Request SheSystemConfigLogControlRequestType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Config Log control commands." SYNTAX INTEGER { setConfigLogEntryNumber(1), setFtpAccount(2), setFtpInterval(3) } -- AutoConfigBackupControl Request SheSystemAutoConfigBackupControlRequest ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "AutoConfig Backup control commands." SYNTAX INTEGER { setAutoConfigBackupEnabled(1), setFtpAccount(2), setBackupTimerval(3) } -- type of active load SheSystemLoadType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The load type." SYNTAX INTEGER { active(1), passive(2) } SheSystemStartupResultType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Result of the last NE startup. " SYNTAX INTEGER { startupInProgress(1), startupFailed(2), startupFinished(3) } SheSystemIpHostUseDhcpType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Either use DHCP or fixed IP address." SYNTAX INTEGER { noUseDhcp(0), useDhcp(1) } -- -- Node definitions -- -- Node definitions -- -- MIB contains the following groups -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1 sheSystemInfo OBJECT IDENTIFIER ::= { sheSystem 1 } -- ----------------------------------------------------------------- -- System general information group -- ----------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.1 sheSystemVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Contains the version of the net element. The selected version depending on the used CXU SW release and detected shelf type of the running NE!! hiX5625/R2.5 hiX5630/R2.5 hiX5635/R2.5 hiX5625/R2.5.1 hiX5630/R2.5.1 hiX5635/R2.5.1 hiX5625/R2.6 hiX5630/R2.6 hiX5635/R2.6 hiX5625/R2.7 hiX5630/R2.7 hiX5635/R2.7 hiX5625/R2.8 hiX5630/R2.8 hiX5635/R2.8 hiX5625/R2.6S2 hiX5630/R2.6S2 hiX5635/R2.6S2 hiX5625/R2.7MH (support H248) hiX5630/R2.7MH (support H248) hiX5635/R2.7MH (support H248) hiX5625/R2.7MS (support SIP) hiX5630/R2.7MS (support SIP) hiX5635/R2.7MS (support SIP) hiX5625/R2.8M hiX5630/R2.8M hiX5635/R2.8M hiX5622/R2.8 hiX5608/R1.0 The used shelftype could be retrieved from shePhysShelfTable. Systemversion -> possible Shelftypes SHE hiX5635 -> M1200:E, M1100:E, G1100:E, G1100:B:E, G1100:A SHE hiX5630 -> M600:E, G600:E, G600:R:E, M600:DF:E SHE hiX5625 -> M400:E, G400:E, G400:R:A, SHE hiX5622 R1.0 -> MDUS:E (obsolete) SHE hiX5608 R1.0 -> empty string because no shelf is used, single box system Shelftype's 2 generation - only new 2G powermodules could be used! (>= with R2.8 maintenance) SHE hiX5635 -> G1100:2G:E, M1100:2G:E SHE hiX5630 -> G600:2G:E, G600:R:2G:E, SHE hiX5625 -> G400:2G:E, G400:R:2G:A, SHE hiX5622 -> G200:2G:E" ::= { sheSystemInfo 1 } -- seabrigde has several flags in the system mib: -- systemState : normal, upgrade -- systemUpgradeState : upgrade-preparation, idle, ready-for-switchover -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.2 sheSystemExternalTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The external time of the net element (UTC). The TMN-OS should set this time after first time power up or system resets and should refresh it once a day. " ::= { sheSystemInfo 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.3 sheSystemStartupType OBJECT-TYPE SYNTAX SheSystemStartupType MAX-ACCESS read-only STATUS current DESCRIPTION " Startup type: 1..resetSystem 2..resetSystemWithDefault " ::= { sheSystemInfo 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.4 sheSystemTmnConnected OBJECT-TYPE SYNTAX SheSystemTmnConnectedType MAX-ACCESS read-only STATUS current DESCRIPTION " The value connected indicates that a manager has received the trap sheSytemStartupEnd and has connected. " ::= { sheSystemInfo 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.5 sheSystemLctConnected OBJECT-TYPE SYNTAX SheSystemTmnConnectedType MAX-ACCESS read-only STATUS current DESCRIPTION " The value connected indicates that a manager has connected as LCT. SHE sends the trap sheSystemLctConnected to all known TMN systems to inform whether the LCT session has been setup or terminated. " ::= { sheSystemInfo 5 } -- ----------------------------------------------------------------- -- System feature capability table -- ----------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.6 sheSystemFeatureCapabilityTable OBJECT-TYPE SYNTAX SEQUENCE OF SheSystemFeatureCapabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The alarm severity table. The alarm severity table associates profile index and AlarmID pairs with severities to be used for alarm traps. (Note that this table does not apply to cleared alarms). " ::= { sheSystemInfo 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.6.1 sheSystemFeatureCapabilityEntry OBJECT-TYPE SYNTAX SheSystemFeatureCapabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of the sheSystemFeatureCapabilityTable. " INDEX { sheSystemFeatureIndex } ::= { sheSystemFeatureCapabilityTable 1 } SheSystemFeatureCapabilityEntry ::= SEQUENCE { sheSystemFeatureIndex Unsigned32, sheSystemFeatureName DisplayString } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.6.1.1 sheSystemFeatureIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " The system feature index. " ::= { sheSystemFeatureCapabilityEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.6.1.2 sheSystemFeatureName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The system feature name. " ::= { sheSystemFeatureCapabilityEntry 2 } -- ----------------------------------------------------------------- -- System control group -- ----------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7 sheSystemControl OBJECT IDENTIFIER ::= { sheSystemInfo 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.1 sheSystemControlRequest OBJECT-TYPE SYNTAX SheSystemControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION " System commands : configureTime : The command to configure the external time. tmnConnect : the command for a manager to connect in order to be allowed to manage the SHE and to stop the NE sending the sheSystemStartupEnd trap. tmnDisconnect: the command for a TMN to disconnect from the NE. lctConnect : the command for a manager to connect as a LCT. The SHE then sends the sheSystemLctSession trap. lctDisconnect: the command for a LCT to disconnect from the NE. The SHE then sends the sheSystemLctSession trap. If a LCT does not disconnect a LCT session is automatically disconnected by the SHE after a internal timer expired. writeDatatoFlash: the command to start writing configuration data of all subsystems to flash-memory (long running command). configureTimeZone: the command to change the current timezone. setCPUThreshold: the command to configure the threshold that when CPU usage exceeds the certain limit, notification is sent. setMemoryThreshold: the command to configure the threshold that when Memory usage exceeds the certain limit, notification is sent. Notifications : sheSystemStartupEnd, sheSystemLctSession, sheSystemWriteDatatoFlashFinished, sheSystemChangedCPULoadThreshold, sheSystemChangedMemoryThreshold. " ::= { sheSystemControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.2 sheSystemControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION " The status of a control request. " ::= { sheSystemControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.3 sheSystemControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE. " ::= { sheSystemControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.4 sheSystemControlReqResult OBJECT-TYPE SYNTAX SheSystemControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION " The result of the last user command. " ::= { sheSystemControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.5 sheSystemControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION " The time stamp of the last command (end of command). " ::= { sheSystemControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.6 sheSystemControlExternalTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-write STATUS current DESCRIPTION "The external time of the net element (UTC). The manager should set this time after first time power up or resetSystem and should refresh it once a day. " ::= { sheSystemControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.7 sheSystemControlTimeZone OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Time Zone of the net element. The TMN-OS should set this time zone in front of the NE's external time. UTC, UTC+1, UTC+2, UTC+3, UTC+3.30, UTC+4, UTC+4.30, UTC+5, UTC+5.30, UTC+5.45, UTC+6, UTC+6.30, UTC+7, UTC+8, UTC+8.45, UTC+9, UTC+9.30, UTC+10, UTC+10.30, UTC+11, UTC+11.30, UTC+12, UTC+12.45, UTC+13, UTC+14, UTC-1, UTC-2, UTC-2.30, UTC-3, UTC-3.30, UTC-4, UTC-4.30, UTC-5, UTC-6, UTC-7, UTC-8, UTC-9, UTC-9.30, UTC-10, UTC-11, UTC-12, An automatic DST (dayligth saving time) switchover is not supported by the NE!!" ::= { sheSystemControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.8 sheSystemControlCPUThreshold OBJECT-TYPE SYNTAX Integer32 (20..100) UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION " The CPU Load Threshold of System. The manager should set this threshold about CPU Load. " ::= { sheSystemControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.9 sheSystemControlCPUThresholdInterval OBJECT-TYPE SYNTAX SheSystemThresholdIntervalType MAX-ACCESS read-write STATUS current DESCRIPTION " The sampling interval for CPU threshold. Average CPU usage is checked on every interval configured. " ::= { sheSystemControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.10 sheSystemControlMemoryThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "kBytes" MAX-ACCESS read-write STATUS current DESCRIPTION " The Memory Usage Threshold of System. The manager should set this threshold about Memory usage. " ::= { sheSystemControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.7.11 sheSystemControlMemoryThresholdInterval OBJECT-TYPE SYNTAX SheSystemThresholdIntervalType MAX-ACCESS read-write STATUS current DESCRIPTION " The sampling interval for CPU threshold. Memory usage is checked on every interval configured. " ::= { sheSystemControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.8 sheSystemTimeZone OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Time Zone of the net element. The TMN-OS should set this time zone in front of the NE's external time. UTC, UTC+1, UTC+2, UTC+3, UTC+3.30, UTC+4, UTC+4.30, UTC+5, UTC+5.30, UTC+5.45, UTC+6, UTC+6.30, UTC+7, UTC+8, UTC+8.45, UTC+9, UTC+9.30, UTC+10, UTC+10.30, UTC+11, UTC+11.30, UTC+12, UTC+12.45, UTC+13, UTC+14, UTC-1, UTC-2, UTC-2.30, UTC-3, UTC-3.30, UTC-4, UTC-4.30, UTC-5, UTC-6, UTC-7, UTC-8, UTC-9, UTC-9.30, UTC-10, UTC-11, UTC-12, An automatic DST (dayligth saving time) switchover is not supported by the NE!!" ::= { sheSystemInfo 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.9 sheSystem5SecCPULoad OBJECT-TYPE SYNTAX Integer32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION " The Avg. Value of CPU Load for 5 seconds. " ::= { sheSystemInfo 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.10 sheSystem1MinCPULoad OBJECT-TYPE SYNTAX Integer32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION " The Avg. Value of CPU Load for 1 minute. " ::= { sheSystemInfo 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.11 sheSystem10MinCPULoad OBJECT-TYPE SYNTAX Integer32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION " The Avg. Value of CPU Load for 1p minutes. " ::= { sheSystemInfo 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.12 sheSystemCPULoadThreshold OBJECT-TYPE SYNTAX Integer32 (20..100) UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION " The threshold of CPU Load. " DEFVAL { 50 } ::= { sheSystemInfo 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.13 sheSystemCPULoadThresholdInterval OBJECT-TYPE SYNTAX SheSystemThresholdIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION " The sampling interval of CPU Load. " DEFVAL { sec60 } ::= { sheSystemInfo 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.14 sheSystemTotalMemory OBJECT-TYPE SYNTAX Integer32 UNITS "kBytes" MAX-ACCESS read-only STATUS current DESCRIPTION " The Total memory of system. " ::= { sheSystemInfo 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.15 sheSystemUsedMemory OBJECT-TYPE SYNTAX Integer32 UNITS "kBytes" MAX-ACCESS read-only STATUS current DESCRIPTION " The Used memory of system. " ::= { sheSystemInfo 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.16 sheSystemFreeMemory OBJECT-TYPE SYNTAX Integer32 UNITS "kBytes" MAX-ACCESS read-only STATUS current DESCRIPTION " The Free memory of system. " ::= { sheSystemInfo 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.17 sheSystemMemoryThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "kBytes" MAX-ACCESS read-only STATUS current DESCRIPTION " The threshold of Memory Usage. " ::= { sheSystemInfo 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.18 sheSystemMemoryThresholdInterval OBJECT-TYPE SYNTAX SheSystemThresholdIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION " The sampling interval of Memory Usage. " DEFVAL { sec60 } ::= { sheSystemInfo 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.19 sheSystemBootloaderVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Contains the version of bootloader." ::= { sheSystemInfo 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.1.20 sheSystemCliConnected OBJECT-TYPE SYNTAX SheSystemTmnConnectedType MAX-ACCESS read-only STATUS current DESCRIPTION "The value connected indicates that a CLI session is active. SHE sends the trap sheSystemCliConnected to all known TMN systems to inform whether the CLI session has been setup or terminated. " ::= { sheSystemInfo 20 } sheSystemStartupResult OBJECT-TYPE SYNTAX SheSystemStartupResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Result of the last NE startup . Values: startupInProgress(1), startupFailed(2), startupFinished(3)" ::= { sheSystemInfo 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2 sheSystemFile OBJECT IDENTIFIER ::= { sheSystem 2 } -- -------------------------------------------------------------- -- System file management control subgroup -- -------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1 sheSystemFileControl OBJECT IDENTIFIER ::= { sheSystemFile 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.1 sheSystemFileControlRequest OBJECT-TYPE SYNTAX SheSystemFileControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "File management commands : upload : a file is uploaded to the FTP server from the SHE NE. download : a file is downloaded from a FTP server to the SHE NE. uploadCardsAllOfType : upload for all cards af the same type. downloadCardsAllOfType : download for all cards af the same type. uploadAllOfSystem : Only for upload of all available remote inventory records! Parameters specify the type of file and the FTP server. downloads: - SW to a singleCard : commands to load a new load - SW to all cards of a type - restoreFile (configuration files) uploads: - log files - restoreFile (congfiguration files) - remote inventory (also AllOfSystem) - performance data Notifications : sheSystemFtp sheSystemSwLoadPromoted Alarms: sheSystemSwmFtpAccessError sheSystemSwmFtpExternalAccessError " ::= { sheSystemFileControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.2 sheSystemFileControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION " The status of a control request. " ::= { sheSystemFileControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.3 sheSystemFileControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE. " ::= { sheSystemFileControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.4 sheSystemFileControlReqResult OBJECT-TYPE SYNTAX SheSystemFileControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION " The result of the last user command. " ::= { sheSystemFileControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.5 sheSystemFileControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION " The time stamp of the last command (end of command). " ::= { sheSystemFileControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.6 sheSystemFileControlTypeOfFile OBJECT-TYPE SYNTAX SheSystemTypeOfFile MAX-ACCESS read-write STATUS current DESCRIPTION " The file type definition: 1..stored load, (only download) 2..error log, (only upload) 3..restoreFile (both up/download) 4..remoteInventory (only upload, AllOfSystem possible) 5..performanceData (only upload) 6..alarmLog (only upload) 7..uptimeLog (only upload) " ::= { sheSystemFileControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.7 sheSystemFileControlPathName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Path name of file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Spaces in pathnames are not allowed, because of possible problems with different FTP implementations (client and/or server)!!" ::= { sheSystemFileControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.8 sheSystemFileControlFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..128)) MAX-ACCESS read-write STATUS current DESCRIPTION " File name of file on FTP server. Spaces in filenames are not allowed, because of possible problems with different FTP implementations (client and/or server)!! " ::= { sheSystemFileControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.9 sheSystemFileControlCardType OBJECT-TYPE SYNTAX SheCardType MAX-ACCESS read-write STATUS current DESCRIPTION " The card type to be upgraded. " ::= { sheSystemFileControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.10 sheSystemFileControlEntPhysicalIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-write STATUS current DESCRIPTION " The entPhysicalIndex of the card to be loaded. " ::= { sheSystemFileControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.12 sheSystemFileControlLoadStatus OBJECT-TYPE SYNTAX SheSystemFileLoadStatusType MAX-ACCESS read-only STATUS current DESCRIPTION " Status of SHE download. 1..finished, 2..running, 3..broken, " ::= { sheSystemFileControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.13 sheSystemFileControlServerAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION " Address of FTP server (dotted notation). Attribute only valid in var bind list with correct sheSystemFileControlCommand. Read-access will report an empty string." ::= { sheSystemFileControl 13 } -- read to this attribute will deliver 20 times sign '-' -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.14 sheSystemFileControlUsrName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION " Username for FTP access. Attribute only valid in var bind list with correct sheSystemFileControlCommand. Read-access will report an empty string. " ::= { sheSystemFileControl 14 } -- read to this attribute will deliver 20 times sign '-' -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.1.15 sheSystemFileControlPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION " Password for FTP access. Attribute only valid in var bind list with correct sheSystemFileControlCommand. Read-access will report an empty string. " ::= { sheSystemFileControl 15 } -- -------------------------------------------------------------- -- System file table -- -------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.2 sheSystemFileSwFileTable OBJECT-TYPE SYNTAX SEQUENCE OF SheSystemFileSwFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " File Table of SHE. List of all files per card present on the SHE and their counterpart on the FTP server Information about Primary and Secondary loads is also found in this table. " ::= { sheSystemFile 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.2.1 sheSystemFileSwFileEntry OBJECT-TYPE SYNTAX SheSystemFileSwFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the sheSystemFileSwTable. Notifications : none. " INDEX { entPhysicalIndex, sheSystemFileSwfIndex } ::= { sheSystemFileSwFileTable 1 } SheSystemFileSwFileEntry ::= SEQUENCE { sheSystemFileSwfIndex SheSystemFileIndexType, sheSystemFileSwfFileName OCTET STRING, sheSystemFileSwfTypeOfFile SheSystemTypeOfFile, sheSystemFileSwfVersion OCTET STRING, sheSystemFileSwfSize Integer32, sheSystemFileSwfTimeStamp Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.2.1.1 sheSystemFileSwfIndex OBJECT-TYPE SYNTAX SheSystemFileIndexType MAX-ACCESS read-only STATUS current DESCRIPTION " Second Index of file table. " ::= { sheSystemFileSwFileEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.2.1.2 sheSystemFileSwfFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION " File name of file in SHE file system. " ::= { sheSystemFileSwFileEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.2.1.3 sheSystemFileSwfTypeOfFile OBJECT-TYPE SYNTAX SheSystemTypeOfFile MAX-ACCESS read-only STATUS current DESCRIPTION " The file type definition: 1..stored load, (only download) 2..error log, (only upload) 3..restoreFile (both up/download) 4..remoteInventory (only upload, AllOfSystem possible) 5..performanceData (only upload) 6..alarmLog (only upload) 7..uptimeLog (only upload)" ::= { sheSystemFileSwFileEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.2.1.4 sheSystemFileSwfVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION " File or software version of file in the SHE file system. " ::= { sheSystemFileSwFileEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.2.1.5 sheSystemFileSwfSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Size of file in SHE file system. " ::= { sheSystemFileSwFileEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.2.2.1.6 sheSystemFileSwfTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION " Time stamp of file in file system of SHE. " ::= { sheSystemFileSwFileEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.3 sheSystemNotifications OBJECT IDENTIFIER ::= { sheSystem 3 } -- -------------------------------------------------------------- -- System notification subgroup -- -------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1 sheSystemEvents OBJECT IDENTIFIER ::= { sheSystemNotifications 1 } -- Start up end event -- 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.1 sheSystemStartupEnd NOTIFICATION-TYPE OBJECTS { sheSystemExternalTime, sheSystemStartupType } STATUS current DESCRIPTION " End of startup. " ::= { sheSystemEvents 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.2 sheSystemFtp NOTIFICATION-TYPE OBJECTS { sheSystemFileControlTimeStamp, sheSystemFileControlRequest, sheSystemFileControlTypeOfFile, sheSystemFileControlPathName, sheSystemFileControlFileName, sheSystemFileControlEntPhysicalIndex, sheSystemFileControlLoadStatus, sheSystemFileControlReqResult } STATUS current DESCRIPTION " Reports the result of a file up/download. The sheSystemFileControlRequest reports either upload / download The sheSystemFileControlLoadStatus reports either finished / ongoing / broken. " ::= { sheSystemEvents 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.3 sheSystemSwLoadPromoted NOTIFICATION-TYPE OBJECTS { sheSystemFileControlTimeStamp, entPhysicalIndex } STATUS current DESCRIPTION " The upgraded load is promoted to be good/trusted. " ::= { sheSystemEvents 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.4 sheSystemSwLoadPromotionFailed NOTIFICATION-TYPE OBJECTS { sheSystemFileControlTimeStamp, entPhysicalIndex, sheSystemFileControlReqResult } STATUS current DESCRIPTION " Sent when load promotion failed. Card will restart with fallback load. The ReqResult should contain some detailed information about the error-reason (tbd.)." ::= { sheSystemEvents 4 } -- LCT connected event -- 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.5 sheSystemLctSession NOTIFICATION-TYPE OBJECTS { sheSystemExternalTime, sheSystemLctConnected } STATUS current DESCRIPTION " A LCT session is connected or disconnected. " ::= { sheSystemEvents 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.6 sheSystemWriteDatatoFlashFinished NOTIFICATION-TYPE OBJECTS { sheSystemControlStatus, sheSystemControlReqResult, sheSystemControlTimeStamp } STATUS current DESCRIPTION "Description." ::= { sheSystemEvents 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.7 sheSystemChangedCPULoadThreshold NOTIFICATION-TYPE OBJECTS { sheSystemControlStatus, sheSystemControlReqResult, sheSystemControlTimeStamp } STATUS current DESCRIPTION "CPU Load Threshold change state by user." ::= { sheSystemEvents 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.3.1.8 sheSystemChangedMemoryThreshold NOTIFICATION-TYPE OBJECTS { sheSystemControlStatus, sheSystemControlReqResult, sheSystemControlTimeStamp } STATUS current DESCRIPTION "Memory usage Threshold change state by user." ::= { sheSystemEvents 8 } sheSystemCliSession NOTIFICATION-TYPE OBJECTS { sheSystemExternalTime, sheSystemCliConnected } STATUS current DESCRIPTION " A CLI session is connected or disconnected. " ::= { sheSystemEvents 9 } -- ----------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.3.2 sheSystemAlarms OBJECT IDENTIFIER ::= { sheSystemNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.3.2.1 sheSystemCPULoadThresholdExceeded NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "Measured CPU load has exceeded the threshold in the given measuring interval." ::= { sheSystemAlarms 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.3.2.2 sheSystemMemoryThresholdExceeded NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "Measured memory usage has exceeded the threshold in the given measuring interval." ::= { sheSystemAlarms 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5 sheSystemNtpClient OBJECT IDENTIFIER ::= { sheSystem 5 } -- -------------------------------------------------------------- -- System NTP Client/Server table -- -------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.1 sheSystemNtpClientEnabled OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "NTP Client enable status." ::= { sheSystemNtpClient 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.2 sheSystemNtpClientXmitInterval OBJECT-TYPE SYNTAX Integer32 (1..2160) UNITS "hour" MAX-ACCESS read-only STATUS current DESCRIPTION "NTP Client transmit-packet interval to request time information from NTP server.. Valid range is 1 hour up to 2160 hours (3 months). The default value should be 24 hours." ::= { sheSystemNtpClient 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.3 sheSystemNtpClientServerTable OBJECT-TYPE SYNTAX SEQUENCE OF SheSystemNtpClientServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " NTP Client server Table of SHE." ::= { sheSystemNtpClient 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.3.1 sheSystemNtpClientServerEntry OBJECT-TYPE SYNTAX SheSystemNtpClientServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the sheSystemNtpClientTable. Notifications : none. " INDEX { sheSystemNtpClientServerIndex } ::= { sheSystemNtpClientServerTable 1 } SheSystemNtpClientServerEntry ::= SEQUENCE { sheSystemNtpClientServerIndex Integer32, sheSystemNtpClientServerName OCTET STRING } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.3.1.1 sheSystemNtpClientServerIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION " Index of file table. " ::= { sheSystemNtpClientServerEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.3.1.2 sheSystemNtpClientServerName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION " Server name of NTP Client in SHE NTP Client system. " ::= { sheSystemNtpClientServerEntry 2 } -- -------------------------------------------------------------- -- System NtpClient management control subgroup -- -------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4 sheSystemNtpClientControl OBJECT IDENTIFIER ::= { sheSystemNtpClient 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4.1 sheSystemNtpClientControlRequest OBJECT-TYPE SYNTAX SheSystemNtpClientControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION " NtpClient management commands : enabledNtpClient : NtpClient client is enabled by users. disabledNtpClient : NtpClient client is disabled bu users changedNtpClientXmitInterval : NtpClient transmit-packet interval is changed by users. addedNtpClientServerName : NtpClient source hostname is added into source list. deletedNtpClientServerName : NtpClient source hostname is deleted in source list. Notifications: ZZZZZZ " ::= { sheSystemNtpClientControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4.2 sheSystemNtpClientControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION " The status of a control request. " ::= { sheSystemNtpClientControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4.3 sheSystemNtpClientControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE. " ::= { sheSystemNtpClientControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4.4 sheSystemNtpClientControlReqResult OBJECT-TYPE SYNTAX SheSystemNtpClientControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION " The result of the last user command. " ::= { sheSystemNtpClientControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4.5 sheSystemNtpClientControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION " The time stamp of the last command (end of command). " ::= { sheSystemNtpClientControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4.6 sheSystemNtpClientControlXmitInterval OBJECT-TYPE SYNTAX Integer32 (1..2160) UNITS "hour" MAX-ACCESS read-write STATUS current DESCRIPTION "Configure NTP Client transmit-packet interval to request time information from NTP server.. Valid range is 1 hour up to 2160 hours (3 months). The default value should be 24 hours." ::= { sheSystemNtpClientControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4.7 sheSystemNtpClientControlServername OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "NtpClient Source hostname or Ip address to get current time." ::= { sheSystemNtpClientControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.4.7 sheSystemNtpClientControlServerIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the addressed table entry." ::= { sheSystemNtpClientControl 8 } -- -------------------------------------------------------------- -- System NtpClient management notification subgroup -- -------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.5 sheSystemNtpClientNotifications OBJECT IDENTIFIER ::= { sheSystemNtpClient 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.5.1 sheSystemNtpClientEnable NOTIFICATION-TYPE OBJECTS { sheSystemNtpClientControlStatus, sheSystemNtpClientControlReqResult, sheSystemNtpClientControlTimeStamp } STATUS current DESCRIPTION "Description." ::= { sheSystemNtpClientNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.5.2 sheSystemNtpClientDisable NOTIFICATION-TYPE OBJECTS { sheSystemNtpClientControlStatus, sheSystemNtpClientControlReqResult, sheSystemNtpClientControlTimeStamp } STATUS current DESCRIPTION "Description." ::= { sheSystemNtpClientNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.5.3 sheSystemNtpClientChangeXmitInterval NOTIFICATION-TYPE OBJECTS { sheSystemNtpClientControlStatus, sheSystemNtpClientControlReqResult, sheSystemNtpClientControlTimeStamp, sheSystemNtpClientControlXmitInterval } STATUS current DESCRIPTION "Description." ::= { sheSystemNtpClientNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.5.4 sheSystemNtpClientAddServerName NOTIFICATION-TYPE OBJECTS { sheSystemNtpClientControlStatus, sheSystemNtpClientControlReqResult, sheSystemNtpClientControlTimeStamp, sheSystemNtpClientControlServerIndex, sheSystemNtpClientControlServername } STATUS current DESCRIPTION "Description." ::= { sheSystemNtpClientNotifications 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.5.5.5 sheSystemNtpClientDeleteServerName NOTIFICATION-TYPE OBJECTS { sheSystemNtpClientControlStatus, sheSystemNtpClientControlReqResult, sheSystemNtpClientControlTimeStamp, sheSystemNtpClientControlServerIndex, sheSystemNtpClientControlServername } STATUS current DESCRIPTION "Description." ::= { sheSystemNtpClientNotifications 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.6 sheSystemDnsServer OBJECT IDENTIFIER ::= { sheSystem 6 } -- -------------------------------------------------------------- -- System DNS Server table -- -------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.6.1 sheSystemDnsServerTable OBJECT-TYPE SYNTAX SEQUENCE OF SheSystemDnsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " DNS server Table of SHE." ::= { sheSystemDnsServer 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.6.1.1 sheSystemDnsServerEntry OBJECT-TYPE SYNTAX SheSystemDnsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the sheSystemDnsServerTable. Notifications : none. " INDEX { sheSystemDnsServerIndex } ::= { sheSystemDnsServerTable 1 } SheSystemDnsServerEntry ::= SEQUENCE { sheSystemDnsServerIndex Integer32, sheSystemDnsServerAddr OCTET STRING } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.6.1.1.1 sheSystemDnsServerIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION " Index of DnsServer table. " ::= { sheSystemDnsServerEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.6.1.1.2 sheSystemDnsServerAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION " IP address of DNS Server system. " ::= { sheSystemDnsServerEntry 2 } -- -------------------------------------------------------------- -- System DNS Server management control subgroup -- -------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.6.2 sheSystemDnsServerControl OBJECT IDENTIFIER ::= { sheSystemDnsServer 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.6.2.1 sheSystemDnsServerControlRequest OBJECT-TYPE SYNTAX SheSystemDnsServerControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION " DNS Server management commands : addedDnsServerName : DNS Server IP Address is added into server list. deletedDnsServerName : DNS Server IP Address is deleted in server list. Notifications: ZZZZZZ " ::= { sheSystemDnsServerControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.6.2.2 sheSystemDnsServerControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION " The status of a control request. " ::= { sheSystemDnsServerControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.6.2.3 sheSystemDnsServerControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE. " ::= { sheSystemDnsServerControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.6.2.4 sheSystemDnsServerControlReqResult OBJECT-TYPE SYNTAX SheSystemDnsServerControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION " The result of the last user command. " ::= { sheSystemDnsServerControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.6.2.5 sheSystemDnsServerControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION " The time stamp of the last command (end of command). " ::= { sheSystemDnsServerControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.6.2.6 sheSystemDnsServerControlAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "DNS Server Ip address." ::= { sheSystemDnsServerControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.6.2.6 sheSystemDnsServerControlIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the addressed table entry." ::= { sheSystemDnsServerControl 7 } -- -------------------------------------------------------------- -- System DNS Server management notification subgroup -- -------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.6.3 sheSystemDnsServerNotifications OBJECT IDENTIFIER ::= { sheSystemDnsServer 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.6.3.1 sheSystemDnsServerAddAddr NOTIFICATION-TYPE OBJECTS { sheSystemDnsServerControlStatus, sheSystemDnsServerControlReqResult, sheSystemDnsServerControlTimeStamp, sheSystemDnsServerControlAddr, sheSystemDnsServerControlIndex } STATUS current DESCRIPTION "Description." ::= { sheSystemDnsServerNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.6.3.2 sheSystemDnsServerDeleteAddr NOTIFICATION-TYPE OBJECTS { sheSystemDnsServerControlStatus, sheSystemDnsServerControlReqResult, sheSystemDnsServerControlTimeStamp, sheSystemDnsServerControlIndex } STATUS current DESCRIPTION "Description." ::= { sheSystemDnsServerNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7 sheSystemManagementSession OBJECT IDENTIFIER ::= { sheSystem 7 } -- -------------------------------------------------------------- -- System Management Session group -- -------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.1 sheSystemManagementSessionSnmpAgingTime OBJECT-TYPE SYNTAX Integer32 (300..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Aging time for SNMP management session." ::= { sheSystemManagementSession 1 } -- ----------------------------------------------------------------- -- System Management Session Table -- ----------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.2 sheSystemManagementSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF SheSystemManagementSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Management session information table for SHE." ::= { sheSystemManagementSession 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.2.1 sheSystemManagementSessionEntry OBJECT-TYPE SYNTAX SheSystemManagementSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the sheSystemManagementSessionTable. Notifications : none. " INDEX { sheSystemManagementSessionIndex } ::= { sheSystemManagementSessionTable 1 } SheSystemManagementSessionEntry ::= SEQUENCE { sheSystemManagementSessionIndex Integer32, sheSystemManagementSessionType SheSystemManagementSessionType, sheSystemManagementSessionSnmpExpiredTime Integer32, sheSystemManagementSessionAddress IpAddress } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.2.1.1 sheSystemManagementSessionIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION " Index of Management Session Table." ::= { sheSystemManagementSessionEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.2.1.2 sheSystemManagementSessionType OBJECT-TYPE SYNTAX SheSystemManagementSessionType MAX-ACCESS read-only STATUS current DESCRIPTION " Management Session Type." ::= { sheSystemManagementSessionEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.2.1.3 sheSystemManagementSessionSnmpExpiredTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Only SNMP Management Session expired Time. If the session is Telnet, this value is 0." ::= { sheSystemManagementSessionEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.2.1.4 sheSystemManagementSessionAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " Management Session IP Address." ::= { sheSystemManagementSessionEntry 4 } -- -------------------------------------------------------------- -- System Management Session control subgroup -- -------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.3 sheSystemManagementSessionControl OBJECT IDENTIFIER ::= { sheSystemManagementSession 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.3.1 sheSystemManagementSessionControlRequest OBJECT-TYPE SYNTAX SheSystemManagementSessionControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION " Management Session global user commands : setSnmpSessionAgingTime : configuring SNMP session aging time. Notifications: sheSystemManagementSessionChangedSnmpAgingTime " ::= { sheSystemManagementSessionControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.3.2 sheSystemManagementSessionControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION " The status of a control request. " ::= { sheSystemManagementSessionControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.3.3 sheSystemManagementSessionControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE. " ::= { sheSystemManagementSessionControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.3.4 sheSystemManagementSessionControlReqResult OBJECT-TYPE SYNTAX SheSystemManagementSessionControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION " The result of the last user command. " ::= { sheSystemManagementSessionControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.3.5 sheSystemManagementSessionControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION " The time stamp of the last command (end of command). " ::= { sheSystemManagementSessionControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.3.6 sheSystemManagementSessionControlSnmpAgingTime OBJECT-TYPE SYNTAX Integer32 (300..3600) UNITS "sec" MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Session Aging Time." ::= { sheSystemManagementSessionControl 6 } -- -------------------------------------------------------------- -- System Management Session notification subgroup -- -------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.4 sheSystemManagementSessionNotifications OBJECT IDENTIFIER ::= { sheSystemManagementSession 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.4.1 sheSystemManagementSessionConnection NOTIFICATION-TYPE OBJECTS { sheSystemManagementSessionType, sheSystemManagementSessionSnmpExpiredTime, sheSystemManagementSessionAddress } STATUS current DESCRIPTION "Management Session Connect event. When a new session is detected, the event occurs." ::= { sheSystemManagementSessionNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.4.2 sheSystemManagementSessionDisconnection NOTIFICATION-TYPE OBJECTS { sheSystemManagementSessionType, sheSystemManagementSessionSnmpExpiredTime, sheSystemManagementSessionAddress } STATUS current DESCRIPTION "Management Session Disonnect event. When an existing session is diconnected, the event occurs. In case of SNMP sessions, when SNMP aging timer is expired, disconnection decision." ::= { sheSystemManagementSessionNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.7.4.3 sheSystemManagementSessionChangedSnmpAgingTime NOTIFICATION-TYPE OBJECTS { sheSystemManagementSessionControlSnmpAgingTime } STATUS current DESCRIPTION "SNMP Management Session Aging Time Change Event." ::= { sheSystemManagementSessionNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8 sheSystemConfigLog OBJECT IDENTIFIER ::= { sheSystem 8 } -- -------------------------------------------------------------- -- System Config Log group -- -------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.1 sheSystemConfigLogGroup OBJECT IDENTIFIER ::= { sheSystemConfigLog 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.1.1 sheSystemConfigLogEntryNumber OBJECT-TYPE SYNTAX Integer32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the configuration log entries to keep. 0: disable configuration logging " DEFVAL { 500 } ::= { sheSystemConfigLogGroup 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.1.2 sheSystemConfigLogFtpServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "FTP server's IP address to which log file will be transferred. Default:0.0.0.0 0.0.0.0: disable FTP transfer " ::= { sheSystemConfigLogGroup 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.1.3 sheSystemConfigLogFtpUser OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "User ID for FTP server. Merge-Info: Element is not needed. Read-access will report an empty string." ::= { sheSystemConfigLogGroup 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.1.4 sheSystemConfigLogFtpPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Password for FTP server. Merge-Info: Element is not needed. Read-access will report an empty string." ::= { sheSystemConfigLogGroup 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.1.5 sheSystemConfigLogFtpInterval OBJECT-TYPE SYNTAX Integer32 (0..2147483647) UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "Timer interval between FTP transfers of log in second 0: disable FTP transfer " DEFVAL { 300 } ::= { sheSystemConfigLogGroup 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.1.6 sheSystemConfigLogFtpPathName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Path name of file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / )." DEFVAL { "/" } ::= { sheSystemConfigLogGroup 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2 sheSystemConfigLogControl OBJECT IDENTIFIER ::= { sheSystemConfigLog 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.1 sheSystemConfigLogControlRequest OBJECT-TYPE SYNTAX SheSystemConfigLogControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "Config log global user commands" ::= { sheSystemConfigLogControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.2 sheSystemConfigLogControlEntryNumber OBJECT-TYPE SYNTAX Integer32 (0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of the configuration log entries to keep" ::= { sheSystemConfigLogControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.3 sheSystemConfigLogControlFtpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "FTP server's IP address to which log file will be transferred" ::= { sheSystemConfigLogControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.4 sheSystemConfigLogControlFtpUser OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "User ID for FTP server. Read-access will report an empty string. " ::= { sheSystemConfigLogControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.5 sheSystemConfigLogControlFtpPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password for FTP server. Read-access will report an empty string." ::= { sheSystemConfigLogControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.6 sheSystemConfigLogControlFtpInterval OBJECT-TYPE SYNTAX Integer32 (0..2147483647) UNITS "sec" MAX-ACCESS read-write STATUS current DESCRIPTION "Timer interval between FTP transfers of log in second 0: disable FTP transfer " ::= { sheSystemConfigLogControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.7 sheSystemConfigLogControlFtpPathName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Path name of file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / )." DEFVAL { "/" } ::= { sheSystemConfigLogControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.8 sheSystemConfigLogControlReqResult OBJECT-TYPE SYNTAX SheSystemControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION " The result of the last user command. " ::= { sheSystemConfigLogControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.9 sheSystemConfigLogControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION " The status of a control request. " ::= { sheSystemConfigLogControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.2.10 sheSystemConfigLogControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION " The time stamp of the last command (end of command). " ::= { sheSystemConfigLogControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.3 sheSystemConfigLogNotifications OBJECT IDENTIFIER ::= { sheSystemConfigLog 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.3.1 sheSystemConfigLogEntryNumberChanged NOTIFICATION-TYPE OBJECTS { sheSystemConfigLogEntryNumber } STATUS current DESCRIPTION "Config entry number to keep is changed." ::= { sheSystemConfigLogNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.3.2 sheSystemConfigLogFtpLoginInfoChanged NOTIFICATION-TYPE OBJECTS { sheSystemConfigLogFtpServerAddress, sheSystemConfigLogFtpUser, sheSystemConfigLogFtpPassword, sheSystemConfigLogFtpPathName } STATUS current DESCRIPTION "FTP server address and login information is changed." ::= { sheSystemConfigLogNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.8.3.3 sheSystemConfigLogFtpIntervalChanged NOTIFICATION-TYPE OBJECTS { sheSystemConfigLogFtpInterval } STATUS current DESCRIPTION "Timer interval is changed." ::= { sheSystemConfigLogNotifications 3 } -- -------------------------------------------------------------- -- System Auto Config Backup group -- -------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9 -- -- Only contained for backward compatibility. -- Will never be supported by SHE R2.5 or higher! sheSystemAutoConfigBackup OBJECT IDENTIFIER ::= { sheSystem 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.1 sheSystemAutoConfigBackupGroup OBJECT IDENTIFIER ::= { sheSystemAutoConfigBackup 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.1.1 sheSystemAutoConfigBackupEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable auto configuration backup feature true: enable false: disable " DEFVAL { false } ::= { sheSystemAutoConfigBackupGroup 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.1.2 sheSystemAutoConfigBackupFtpServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "FTP server's IP address to which config file will be transferred. Default:0.0.0.0 0.0.0.0: disable FTP transfer " ::= { sheSystemAutoConfigBackupGroup 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.1.3 sheSystemAutoConfigBackupFtpUser OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS current DESCRIPTION "User ID for FTP server" ::= { sheSystemAutoConfigBackupGroup 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.1.4 sheSystemAutoConfigBackupFtpPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Password for FTP server" ::= { sheSystemAutoConfigBackupGroup 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.1.5 sheSystemAutoConfigBackupFtpPathName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Path name of file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ) Default: / " DEFVAL { "/" } ::= { sheSystemAutoConfigBackupGroup 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.1.6 sheSystemAutoConfigBackupTime OBJECT-TYPE SYNTAX Integer32 (30..2147483647) UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates a time that ftp backup should be performed since autoconfiguration has been set." DEFVAL { 300 } ::= { sheSystemAutoConfigBackupGroup 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.2 sheSystemAutoConfigBackupControl OBJECT IDENTIFIER ::= { sheSystemAutoConfigBackup 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.2.1 sheSystemAutoConfigBackupControlRequest OBJECT-TYPE SYNTAX SheSystemAutoConfigBackupControlRequest MAX-ACCESS read-write STATUS current DESCRIPTION "AutoConfigBackup global user commands" ::= { sheSystemAutoConfigBackupControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.2.2 sheSystemAutoConfigBackupControlEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable auto configuration backup feature true: enabled false: disabled " DEFVAL { false } ::= { sheSystemAutoConfigBackupControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.2.3 sheSystemAutoConfigBackupControlFtpServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "FTP server's IP address to which config file will be transferred." ::= { sheSystemAutoConfigBackupControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.2.4 sheSystemAutoConfigBackupControlFtpUser OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-write STATUS current DESCRIPTION "User ID for FTP server" ::= { sheSystemAutoConfigBackupControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.2.5 sheSystemAutoConfigBackupControlFtpPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password for FTP server" ::= { sheSystemAutoConfigBackupControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.2.6 sheSystemAutoConfigBackupControlFtpPathName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Path name of file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Default: / " ::= { sheSystemAutoConfigBackupControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.2.7 sheSystemAutoConfigBackupControlBackupTime OBJECT-TYPE SYNTAX Integer32 (30..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "It indicates a time that ftp backup should be performed since autoconfiguration has been set." ::= { sheSystemAutoConfigBackupControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.3 sheSystemAutoConfigBackupNotifications OBJECT IDENTIFIER ::= { sheSystemAutoConfigBackup 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.3.1 sheSystemAutoConfigBackupEnabledChanged NOTIFICATION-TYPE OBJECTS { sheSystemAutoConfigBackupEnabled } STATUS current DESCRIPTION "Auto configuration backup is enabled or disabled." ::= { sheSystemAutoConfigBackupNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.3.2 sheSystemAutoConfigBackupFtpLoginInfoChanged NOTIFICATION-TYPE OBJECTS { sheSystemAutoConfigBackupFtpServerAddress, sheSystemAutoConfigBackupFtpUser, sheSystemAutoConfigBackupFtpPassword, sheSystemAutoConfigBackupFtpPathName } STATUS current DESCRIPTION "FTP server address and login information is changed." ::= { sheSystemAutoConfigBackupNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.2.9.3.3 sheSystemAutoConfigBackupTimeChanged NOTIFICATION-TYPE OBJECTS { sheSystemAutoConfigBackupTime } STATUS current DESCRIPTION "Config backup time is changed." ::= { sheSystemAutoConfigBackupNotifications 3 } sheSystemSnmp OBJECT IDENTIFIER ::= { sheSystem 10 } sheSystemNotificationCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of last sended notification. This OID is last member of each sended notification from SHE NE. A TMN system should now be able to check, if all notification were received and if not a consistency check could be performed. " ::= { sheSystemSnmp 1 } -- Configuration and status information for automatic sw upgrade and db backup controls. sheSystemMaintenance OBJECT IDENTIFIER ::= { sheSystem 11 } sheSystemSwMaintenance OBJECT IDENTIFIER ::= { sheSystemMaintenance 1 } sheSystemSwMaintenanceBase OBJECT IDENTIFIER ::= { sheSystemSwMaintenance 1 } sheSystemSwmSapsServerAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "Address of SAPS FTP server (dotted notation)." ::= { sheSystemSwMaintenanceBase 1 } sheSystemSwmSapsPathName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Path name of SAPS file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Spaces in pathnames are not allowed, because of possible problems with different FTP implementations (client and/or server)!!" ::= { sheSystemSwMaintenanceBase 2 } sheSystemSwmSapsFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "File name of SAPS file on FTP server. Spaces in filenames are not allowed, because of possible problems with different FTP implementations (client and/or server)!! " ::= { sheSystemSwMaintenanceBase 3 } sheSystemSwmAdminState OBJECT-TYPE SYNTAX SheSystemAdminState MAX-ACCESS read-only STATUS current DESCRIPTION "This state describes the current usage of automatic sw upgrade. The following states are supported: unlocked(1) -> saps handling used locked(2) -> saps handling not used (default) Important Note: If the automatic sw upgrade system is enabled, the sheSystemFileControl group for single sw upgrades is always busy!! If a sw upgrade should be start for a single Card or a single card type, the sheSystemSwmAdminState has to be locked and then the sheSystemFileControl could be used!" DEFVAL { 2 } ::= { sheSystemSwMaintenanceBase 4 } sheSystemSwmCurrentStatus OBJECT-TYPE SYNTAX SheSystemSwmCurrentStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter describes the current status of automatic sw upgrade process. The following states are supported: passive(1) -> saps handling disabled (default) or saps handling enabled but last request failed started(2) -> saps handling enabled, start loading S-APS file active(3) -> saps handling enabled and running " ::= { sheSystemSwMaintenanceBase 5 } -- -------------------------------------------------------------- -- SW Upgrade Task Table -- -------------------------------------------------------------- -- sheSystemSwMaintenanceTaskTable OBJECT-TYPE SYNTAX SEQUENCE OF SheSystemSwMaintenanceTaskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of the current active or failed tasks of SW upgrade. This table is used to display the automatic upgrade status for single plugin units at the TMN. " ::= { sheSystemSwMaintenance 2 } -- info-IMPL: V2.0-> sheSystemSwMaintenanceTaskEntry OBJECT-TYPE SYNTAX SheSystemSwMaintenanceTaskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of the SW upgrade task table. " INDEX { sheSystemSwmTIndex } ::= { sheSystemSwMaintenanceTaskTable 1 } SheSystemSwMaintenanceTaskEntry ::= SEQUENCE { sheSystemSwmTIndex Unsigned32, sheSystemSwmTCardType SheCardType, sheSystemSwmTEntPhysicalIndex PhysicalIndex, sheSystemSwmTTimeStamp Unsigned32, sheSystemSwmTUpgradeState SheSystemMaintenanceControlReqResult, sheSystemSwmTUpgradeResult SheSystemMaintenanceControlReqResult, sheSystemSwmTSwVersion OCTET STRING, sheSystemSwmTSwVersionNeed OCTET STRING } sheSystemSwmTIndex OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Unique value to identify an entry of this table. " ::= { sheSystemSwMaintenanceTaskEntry 1 } sheSystemSwmTCardType OBJECT-TYPE SYNTAX SheCardType MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the plug-in unit type to be upgraded. " ::= { sheSystemSwMaintenanceTaskEntry 2 } sheSystemSwmTEntPhysicalIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The entPhysicalIndex of PIU to be loaded." ::= { sheSystemSwMaintenanceTaskEntry 3 } sheSystemSwmTTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the task. It is updated anytime the upgrade task state changes. " ::= { sheSystemSwMaintenanceTaskEntry 4 } sheSystemSwmTUpgradeState OBJECT-TYPE SYNTAX SheSystemMaintenanceControlReqResult MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the current processing state of the upgrade task: - sutInitialized - sutToDo - sutStarted - sutCrashed - sutFtpDone - sutDone - sutReadyForReset - sutResetInProgress - sutObsolete" ::= { sheSystemSwMaintenanceTaskEntry 5 } sheSystemSwmTUpgradeResult OBJECT-TYPE SYNTAX SheSystemMaintenanceControlReqResult MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only attribute informs about the result of the performed upgrade (in case of failed upgrade the error reason). " ::= { sheSystemSwMaintenanceTaskEntry 6 } sheSystemSwmTSwVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "String containing the APS version which is loaded into the plug-in unit. " ::= { sheSystemSwMaintenanceTaskEntry 7 } sheSystemSwmTSwVersionNeed OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "String containing the APS version which should be loaded into the plug-in unit. " ::= { sheSystemSwMaintenanceTaskEntry 8 } -- -------------------------------------------------------------- -- SW maintenance control subgroup -- -------------------------------------------------------------- -- This managed entity represents the control group for saps sw maintenance user commands. -- The following user commands are implemented : -- -- setSystemMaintenanceBase -- Set needed ftp access information for automatic SAPS request's. -- -- setSwmAdminState -- Enable/Disable the automatic saps sw maintenance system. -- -- swmUpgrStartRequest: -- Start upgrade for the sytem in the background including sw activation. -- -- swmUpgrStartRequestNoReset: -- Start upgrade for the sytem in the background without sw activation. -- To activate new sw versions, the piu's should be made a reset. -- -- swmReadSAPSContentFile : -- The SAPS (Sytem Application Software) content file describes an assignment of -- available SW loads to loadable PIUs inclusively the CXU . -- If there is a new SAPs content file at the FTP server f.ex. because of bug fix -- release the crafts person has to request the reading of the SAPS content file -- so that the information is available in the DSLAM. -- The SAPS content file is automatically read after reload or after activation -- of a CXU load. -- -- sheSystemSwMaintenanceControl OBJECT IDENTIFIER ::= { sheSystemSwMaintenance 3 } sheSystemSwmControlRequest OBJECT-TYPE SYNTAX SheSystemMaintenanceControlReq MAX-ACCESS read-write STATUS current DESCRIPTION "SW upgrade command requests from TMN. setSystemMaintenanceBase(50), - Set needed ftp access information for automatic SAPS request's. notifications: sheSystemSwmBaseSet setSwmAdminState(51), - lock or unlock the automatic saps system notifications: sheSystemSwmBaseAdminStateSet sheSystemReadSAPSContentFileReady (if set to unlock) sheSystemSwmFTPError (if ftp could not reached) swmUpgrStartRequest(100), - start new upgrade procedure including automatic load activation notifications: sheSystemSwmFTPError sheSystemSwmUpgradeStartResult swmUpgrStartRequestNoReset(101), - start new upgrade procedure without automatic load activation notifications: sheSystemSwmReadyForReset sheSystemSwmFTPError sheSystemUpgradeCanceled (bad case only) sheSystemSwmUpgradeStartResult swmReadSAPSContentFile(102), - start request of new SAPS file from server, no download action is started notification: sheSystemReadSAPSContentFileReady sheSystemSwmFTPError " ::= { sheSystemSwMaintenanceControl 1 } sheSystemSwmControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION " The status of the current request. " ::= { sheSystemSwMaintenanceControl 2 } sheSystemSwmControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Wait time in seconds after complete upgrade for a unit type. " ::= { sheSystemSwMaintenanceControl 3 } sheSystemSwmControlReqResult OBJECT-TYPE SYNTAX SheSystemMaintenanceControlReqResult MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheSystemSwMaintenanceControl 4 } sheSystemSwmControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION " The time stamp of the last command (end of command). " ::= { sheSystemSwMaintenanceControl 5 } sheSystemSwmControlSapsServerAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Address of SAPS FTP server (dotted notation)." ::= { sheSystemSwMaintenanceControl 6 } sheSystemSwmControlSapsPathName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Path name of SAPS file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Spaces in pathnames are not allowed, because of possible problems with different FTP implementations (client and/or server)!!" ::= { sheSystemSwMaintenanceControl 7 } sheSystemSwmControlSapsFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "File name of SAPS file on FTP server. Spaces in filenames are not allowed, because of possible problems with different FTP implementations (client and/or server)!! " ::= { sheSystemSwMaintenanceControl 8 } sheSystemSwmControlSapsUsrName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Username for SAPS FTP access. Read-access to this attribute will deliver 20 times sign '-' " ::= { sheSystemSwMaintenanceControl 9 } sheSystemSwmControlSapsPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password for SAPS FTP access. Read-access to this attribute will deliver 20 times sign '-' " ::= { sheSystemSwMaintenanceControl 10 } sheSystemSwmControlAdminState OBJECT-TYPE SYNTAX SheSystemAdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This set the current usage of automatic sw upgrade. The following states are supported: unlocked(1) -> saps handling used locked(2) -> saps handling not used (default) " ::= { sheSystemSwMaintenanceControl 11 } sheSystemSwMaintenanceNotifications OBJECT IDENTIFIER ::= { sheSystemSwMaintenance 4 } sheSystemSwmBaseSet NOTIFICATION-TYPE OBJECTS { sheSystemSwmControlStatus, sheSystemSwmControlReqResult, sheSystemSwmControlTimeStamp } STATUS current DESCRIPTION "Configuration trap for SAPS basic ftp access settings." ::= { sheSystemSwMaintenanceNotifications 1 } sheSystemSwmAdminStateSet NOTIFICATION-TYPE OBJECTS { sheSystemSwmControlStatus, sheSystemSwmControlReqResult, sheSystemSwmControlTimeStamp, sheSystemSwmAdminState } STATUS current DESCRIPTION "Configuration trap for SAPS basic admin state settings." ::= { sheSystemSwMaintenanceNotifications 2 } sheSystemReadSAPSContentFileReady NOTIFICATION-TYPE OBJECTS { sheSystemSwmControlStatus, sheSystemSwmControlReqResult, sheSystemSwmControlTimeStamp } STATUS current DESCRIPTION "Result trap for request of new SAPS file from server." ::= { sheSystemSwMaintenanceNotifications 3 } sheSystemSwmReadyForReset NOTIFICATION-TYPE OBJECTS { sheSystemSwmControlStatus, sheSystemSwmControlReqResult, sheSystemSwmControlTimeStamp, sheSystemSwmTEntPhysicalIndex } STATUS current DESCRIPTION "Trap will be send after succesfull SwUpgrade for a single card if a sw upgrade was started without automatic load activation." ::= { sheSystemSwMaintenanceNotifications 4 } sheSystemSwmFTPError NOTIFICATION-TYPE OBJECTS { sheSystemSwmControlStatus, sheSystemSwmControlReqResult, sheSystemSwmControlTimeStamp } STATUS current DESCRIPTION "Result trap for sw upgrade FTP access." ::= { sheSystemSwMaintenanceNotifications 5 } sheSystemSwmUpgradeStartResult NOTIFICATION-TYPE OBJECTS { sheSystemSwmControlRequest, sheSystemSwmControlStatus, sheSystemSwmControlReqResult, sheSystemSwmControlTimeStamp } STATUS current DESCRIPTION "Configuration result trap for long running command." ::= { sheSystemSwMaintenanceNotifications 6 } sheSystemSwmCurrentStatusChanged NOTIFICATION-TYPE OBJECTS { sheSystemSwmControlTimeStamp, sheSystemSwmCurrentStatus } STATUS current DESCRIPTION "The current operational status of the automatic sw upgrade process changed." ::= { sheSystemSwMaintenanceNotifications 7 } sheSystemSwMaintenanceAlarms OBJECT IDENTIFIER ::= { sheSystemSwMaintenance 5 } sheSystemSwmFtpAccessError NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "Alarm will be set because of failures during read or write during the NE internal FTP communication. A successful ftp process will clear this alarm. Alarm will be used by manual download and automatic saps upgrade." ::= { sheSystemSwMaintenanceAlarms 1 } sheSystemSwmFtpExternalAccessError NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "Alarm will be set because of failures during read or write during the NE external FTP communication (access to external ftp server failed). A successful ftp process will clear this alarm. Alarm will be used by manual download and automatic saps upgrade." ::= { sheSystemSwMaintenanceAlarms 2 } sheSystemSwmStatusError NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "Alarm will be set because of failures during automatic sw upgrade process which force a temporary switch off for this process. A restart could be triggered by the following command's: setSwmAdminState(51) swmUpgrStartRequest(100) swmUpgrStartRequestNoReset(101) " ::= { sheSystemSwMaintenanceAlarms 3 } sheSystemDbMaintenance OBJECT IDENTIFIER ::= { sheSystemMaintenance 2 } sheSystemDbMaintenanceBase OBJECT IDENTIFIER ::= { sheSystemDbMaintenance 1 } sheSystemDbmServerAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "Address of DB FTP server (dotted notation)." ::= { sheSystemDbMaintenanceBase 1 } sheSystemDbmPathName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Path name of DB backup files on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Spaces in pathnames are not allowed, because of possible problems with different FTP implementations (client and/or server)!!" ::= { sheSystemDbMaintenanceBase 2 } sheSystemDbmRemoteBackupAdminState OBJECT-TYPE SYNTAX SheSystemAdminState MAX-ACCESS read-only STATUS current DESCRIPTION "This state describes the current usage of automatic remote db backup. The following states are supported: unlocked(1) -> remote db backup handling used locked(2) -> remote db backup handling not used (default)" DEFVAL { 2 } ::= { sheSystemDbMaintenanceBase 3 } sheSystemDbmBackupStartTime OBJECT-TYPE SYNTAX Unsigned32 (0..1439) UNITS "minute" MAX-ACCESS read-only STATUS current DESCRIPTION "Start time basis for remote DB backup after system restart, backup timer reconfigurations or system clock reset. The first backup will be started at this time + sheSystemDbmBackupPeriod and will then be repeated each sheSystemDbmBackupPeriod. Range: 0 (0 am) .. 1439 (23.59 pm). Default: 0 Reminder: NE uses always a UTC time base." DEFVAL { 0 } ::= { sheSystemDbMaintenanceBase 4 } sheSystemDbmBackupPeriod OBJECT-TYPE SYNTAX Unsigned32 (1..48) UNITS "hour" MAX-ACCESS read-only STATUS current DESCRIPTION "Interval between two remote backup operations in hours. Backup is started only if there were relevant configuration changes during the last period. Default: 24 hours " DEFVAL { 24 } ::= { sheSystemDbMaintenanceBase 5 } sheSystemDbmBackupWaitingPeriod OBJECT-TYPE SYNTAX Unsigned32 (1..59) UNITS "minute" MAX-ACCESS read-only STATUS current DESCRIPTION "Waiting period in minutes before next local backup, in case of configuration changes. Default value : 5 minutes. " DEFVAL { 5 } ::= { sheSystemDbMaintenanceBase 6 } sheSystemDbmBackupMaxFileNumber OBJECT-TYPE SYNTAX Unsigned32 (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "This number describes the maximum set of different backup files on the remote ftp site. Default number is 5." DEFVAL { 5 } ::= { sheSystemDbMaintenanceBase 7 } sheSystemDbmLocalBackupAdminState OBJECT-TYPE SYNTAX SheSystemAdminState MAX-ACCESS read-only STATUS current DESCRIPTION "This value administrate the automatic local db backup after sheSystemDbmBackupWaitingPeriod in case of configuration actions. Default: unlocked (automatic local backup is enabled)" DEFVAL { 1 } ::= { sheSystemDbMaintenanceBase 8 } sheSystemDbBackupFilesTable OBJECT-TYPE SYNTAX SEQUENCE OF SheSystemDbBackupFilesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Table shows the DB backup files at the FTP server with time and date of their creation. The table is empty per default and can be updated with user command refreshDbBackupFilesTable. This command searches all existing DB backup files at the FTP server. " ::= { sheSystemDbMaintenance 2 } -- info-IMPL: V3.0-> sheSystemDbBackupFilesEntry OBJECT-TYPE SYNTAX SheSystemDbBackupFilesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of the xldv20DbBackupFilesTable. Notifications : . " INDEX { sheSystemDbBackupFileIndex } ::= { sheSystemDbBackupFilesTable 1 } SheSystemDbBackupFilesEntry ::= SEQUENCE { sheSystemDbBackupFileIndex Unsigned32, sheSystemDbBackupFileName DisplayString, sheSystemDbBackupFileTimeStamp Unsigned32 } sheSystemDbBackupFileIndex OBJECT-TYPE SYNTAX Unsigned32 (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "Unique value to identify an entry of this table. " ::= { sheSystemDbBackupFilesEntry 1 } sheSystemDbBackupFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION " The name of the DB backup file. " ::= { sheSystemDbBackupFilesEntry 2 } sheSystemDbBackupFileTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION " The time stamp of the DB backup file, i.e. the time and date when the DB backup file has been created. " ::= { sheSystemDbBackupFilesEntry 3 } -- ============================================================== -- D a t a B a s e M a n a g e m e n t G r o u p -- ============================================================== -- -------------------------------------------------------------- -- DataBase Management control subgroup -- -------------------------------------------------------------- sheSystemDbmControl OBJECT IDENTIFIER ::= { sheSystemDbMaintenance 3 } -- This managed entity manages the control request for storage -- of the database. sheSystemDbmControlRequest OBJECT-TYPE SYNTAX SheSystemMaintenanceControlReq MAX-ACCESS read-write STATUS current DESCRIPTION " Database Management commands : setSystemMaintenanceBase: - Set needed ftp access information for automatic DB request's. notifications: sheSystemDbmBaseSet backupDb : - The command for a manual database backup into the FEPROM of the DSLAM and to the FTP server. The return value commExecStarted indicates the beginning of DB storage. notification: sheSystemDbmResult refreshDbBackupFilesTable : - The DSLAM supports several backup files. The command retrieves the backup files at the FTP server and provides their file names and time and date of creation in the table sheSystemDbBackFilesTable. notification: sheSystemRefreshDbmBackupFilesTable dbReloadSpecificFile: - Reload a specific file from sheSystemDbBackFilesTable into the DSLAM. If successful, the CXU perform a reset for activation. notification: sheSystemDbmResult setBackupPeriod: - Configure the backup period settings for automatic remote backup to ftp server and local backup to EEPROM. notification: sheSystemDbmBackupPeriodSet setLocalBackupAdminState: - Enables or disables the automatic local backup feature. notification: sheSystemDbmLocalBackupAdminstateSet setRemoteBackupAdminState: - Enables or disables the automatic remote backup feature. notification: sheSystemDbmRemoteBackupAdminstateSet " ::= { sheSystemDbmControl 1 } sheSystemDbmControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION " The status of the control request. " ::= { sheSystemDbmControl 2 } sheSystemDbmControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The maximum wait time for the manager when a DB storage request cannot be executed immediately (value commExecStarted in the result attribute sheSystemMaintenanceControlReqResult). The manager reads this value from the DSLAM. The end of request indicates the trap sheSystemTrDbBackup. " ::= { sheSystemDbmControl 3 } sheSystemDbmControlReqResultLocal OBJECT-TYPE SYNTAX SheSystemMaintenanceControlReqResult MAX-ACCESS read-only STATUS current DESCRIPTION " The result of the local backup request. " ::= { sheSystemDbmControl 4 } sheSystemDbmControlReqResultRemote OBJECT-TYPE SYNTAX SheSystemMaintenanceControlReqResult MAX-ACCESS read-only STATUS current DESCRIPTION " The result of the last remote backup request. " ::= { sheSystemDbmControl 5 } sheSystemDbmControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION " The time stamp of the last command (end of command). " ::= { sheSystemDbmControl 6 } sheSystemDbmControlServerAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Address of DB FTP server (dotted notation)." ::= { sheSystemDbmControl 7 } sheSystemDbmControlPathName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Path name of DB backup files on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Spaces in pathnames are not allowed, because of possible problems with different FTP implementations (client and/or server)!!" ::= { sheSystemDbmControl 8 } sheSystemDbmControlUsrName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Username for DB backup FTP access. Read-access to this attribute will deliver 20 times sign '-' " ::= { sheSystemDbmControl 9 } sheSystemDbmControlPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password for DB backup FTP access. Read-access to this attribute will deliver 20 times sign '-' " ::= { sheSystemDbmControl 10 } sheSystemDbmControlRemoteBackupAdminState OBJECT-TYPE SYNTAX SheSystemAdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This set the current usage of automatic remote db backup. The following states are supported: unlocked(1) -> remote db backup handling used locked(2) -> remote db backup handling not used (default)" ::= { sheSystemDbmControl 11 } sheSystemDbmControlBackupStartTime OBJECT-TYPE SYNTAX Unsigned32 (0..1439) UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "Start time basis for remote DB backup after system restart, backup timer reconfigurations or system clock reset. The first backup will be started at this time + sheSystemDbmBackupPeriod and will then be repeated each sheSystemDbmBackupPeriod. Range: 0 (0 am) .. 1439 (23.59 pm). Reminder: NE uses always a UTC time base. " ::= { sheSystemDbmControl 12 } sheSystemDbmControlBackupPeriod OBJECT-TYPE SYNTAX Unsigned32 (1..48) UNITS "hour" MAX-ACCESS read-write STATUS current DESCRIPTION "Interval between two remote backup operations in hours. Backup is started only if there were relevant configuration changes during the last period." ::= { sheSystemDbmControl 13 } sheSystemDbmControlBackupWaitingPeriod OBJECT-TYPE SYNTAX Unsigned32 (1..59) UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "Waiting period in minutes before next local backup, in case of configuration changes." ::= { sheSystemDbmControl 14 } sheSystemDbmControlBackupMaxFileNumber OBJECT-TYPE SYNTAX Unsigned32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "This number describes the maximum set of different backup files on the remote ftp site. " ::= { sheSystemDbmControl 15 } sheSystemDbmControlLocalBackupAdminState OBJECT-TYPE SYNTAX SheSystemAdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This value administrate the automatic local db backup after sheSystemDbmBackupWaitingPeriod in case of configuration actions. Default: unlocked (automatic local backup is enabled)" ::= { sheSystemDbmControl 16 } sheSystemDbmControlBackupFileIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "The index selects the DB backup file in the sheSystemDbBackupFilesTable which shall be loaded into the DSLAM from the FTP server with user command dbReloadSpecificFile. " ::= { sheSystemDbmControl 17 } sheSystemDbMaintenanceNotifications OBJECT IDENTIFIER ::= { sheSystemDbMaintenance 4 } sheSystemDbmBaseSet NOTIFICATION-TYPE OBJECTS { sheSystemDbmControlStatus, sheSystemDbmControlTimeStamp, sheSystemDbmControlReqResultRemote, sheSystemDbmControlServerAddr, sheSystemDbmControlPathName } STATUS current DESCRIPTION "Configuration trap for remote DB basic access settings." ::= { sheSystemDbMaintenanceNotifications 1 } sheSystemDbmResult NOTIFICATION-TYPE OBJECTS { sheSystemDbmControlTimeStamp, sheSystemDbmControlReqResultLocal, sheSystemDbmControlReqResultRemote, sheSystemDbmControlStatus } STATUS current DESCRIPTION "Indicates the end and the result of the database backup or restore." ::= { sheSystemDbMaintenanceNotifications 3 } sheSystemDbmBackupFilesTableRefreshed NOTIFICATION-TYPE OBJECTS { sheSystemDbmControlTimeStamp, sheSystemDbmControlStatus, sheSystemDbmControlReqResultRemote } STATUS current DESCRIPTION "Indicates end of user command refreshDbmBackupFilesTable." ::= { sheSystemDbMaintenanceNotifications 4 } sheSystemDbmBackupPeriodSet NOTIFICATION-TYPE OBJECTS { sheSystemDbmControlTimeStamp, sheSystemDbmControlStatus, sheSystemDbmBackupMaxFileNumber, sheSystemDbmControlReqResultLocal, sheSystemDbmBackupPeriod, sheSystemDbmBackupStartTime, sheSystemDbmBackupWaitingPeriod } STATUS current DESCRIPTION "Settings for automatic backup period are set." ::= { sheSystemDbMaintenanceNotifications 5 } sheSystemDbmLocalBackupAdminstateSet NOTIFICATION-TYPE OBJECTS { sheSystemDbmControlTimeStamp, sheSystemDbmControlReqResultLocal, sheSystemDbmControlStatus, sheSystemDbmLocalBackupAdminState } STATUS current DESCRIPTION "Configuration notification for local db backup." ::= { sheSystemDbMaintenanceNotifications 6 } sheSystemDbmRemoteBackupAdminstateSet NOTIFICATION-TYPE OBJECTS { sheSystemDbmControlTimeStamp, sheSystemDbmControlStatus, sheSystemDbmControlReqResultRemote, sheSystemDbmControlRemoteBackupAdminState } STATUS current DESCRIPTION "Configuration notification for local db backup." ::= { sheSystemDbMaintenanceNotifications 7 } sheSystemDbMaintenanceAlarms OBJECT IDENTIFIER ::= { sheSystemDbMaintenance 5 } sheSystemLocalDbInvalid NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "Alarm will be set if the local DB is invalid because of failures during read/write local DB or if the local DB was not updated yet after a configuration sequence." ::= { sheSystemDbMaintenanceAlarms 1 } sheSystemRemoteDbInvalid NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "Alarm will be set if the remote DB is invalid because of failures during read/write remote DB or if the remote DB was not updated yet after a configuration sequence." ::= { sheSystemDbMaintenanceAlarms 2 } sheSystemDbFtpAccessError NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "Alarm will be set because of failures during read or write on DB Ftp server." ::= { sheSystemDbMaintenanceAlarms 3 } -- New supported with SHE R2.6. sheSystemIpConfig OBJECT IDENTIFIER ::= { sheSystem 12 } sheSystemIpHostTable OBJECT-TYPE SYNTAX SEQUENCE OF SheSystemIpHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains attributes for each IP host interface." ::= { sheSystemIpConfig 1 } sheSystemIpHostEntry OBJECT-TYPE SYNTAX SheSystemIpHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry represents a set of configurations in sheSystemIpHostTable. " INDEX { sheSystemIpHostIndex } ::= { sheSystemIpHostTable 1 } SheSystemIpHostEntry ::= SEQUENCE { sheSystemIpHostIndex Unsigned32, sheSystemIpHostName DisplayString, sheSystemIpHostUseDhcp SheSystemIpHostUseDhcpType, sheSystemIpHostIpAddress IpAddress, sheSystemIpHostSubnetMask IpAddress, sheSystemIpHostOuterVlanId Unsigned32, sheSystemIpHostInnerVlanId Unsigned32, sheSystemIpHostDescription OCTET STRING, sheSystemIpHostOuterVlanPriority Unsigned32, sheSystemIpHostInnerVlanPriority Unsigned32 } sheSystemIpHostIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Table index. Each index uniquely identifies one Ip host table entry." ::= { sheSystemIpHostEntry 1 } sheSystemIpHostName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "A descriptional name that uniquely identifies a entry of this table. The name is selected by the NE and identify the interface also on CLI." ::= { sheSystemIpHostEntry 2 } sheSystemIpHostUseDhcp OBJECT-TYPE SYNTAX SheSystemIpHostUseDhcpType MAX-ACCESS read-only STATUS current DESCRIPTION "Either to use Dhcp or not. If set to 0 (default) no DHCP will be used. Valid values: noUseDhcp(0), useDhcp(1) Note: Currently no support planed." DEFVAL { noUseDhcp } ::= { sheSystemIpHostEntry 3 } sheSystemIpHostIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IpAddress. Assigned by operator request or by DHCP if used." ::= { sheSystemIpHostEntry 4 } sheSystemIpHostSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "subnet mask" ::= { sheSystemIpHostEntry 5 } sheSystemIpHostOuterVlanId OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "The host vlan for this ip interface which should be used as outer tag in double tagging mode or in single tagging mode. Set to 0 if no host VLAN should be used." DEFVAL { 0 } ::= { sheSystemIpHostEntry 6 } sheSystemIpHostInnerVlanId OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "The host vlan for this ip interface which should be used as inner tag if the NE run in double tagging mode. Set to 0 if no host VLAN should be used or if the NE uses single tag mode." DEFVAL { 0 } ::= { sheSystemIpHostEntry 7 } sheSystemIpHostDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Could describe who uses this ip interface. This description could be used by the operator to store information about the intended interface usage. The parameter will not be evaluated by the NE." ::= { sheSystemIpHostEntry 8 } sheSystemIpHostOuterVlanPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The used .1p priority for host vlan of this ip interface which should be used as outer tag in double tagging mode or in single tagging mode. Setting is don't care if no host VLAN should be used. New with R2.8 maintenance." DEFVAL { 7 } ::= { sheSystemIpHostEntry 9 } sheSystemIpHostInnerVlanPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The used .1p priority for host vlan of this ip interface which should be used as inner tag if the NE run in double tagging mode. Setting is don't care if no host VLAN should be used. New with R2.8 maintenance." DEFVAL { 7 } ::= { sheSystemIpHostEntry 10 } sheSystemIpHostControl OBJECT IDENTIFIER ::= { sheSystemIpConfig 2 } sheSystemIpHostControlRequest OBJECT-TYPE SYNTAX SheSystemIpControlReqType MAX-ACCESS read-write STATUS current DESCRIPTION "The request of a user command. createSystemIpHost (50) sheSystemIpHostControlUseDhcp sheSystemIpHostControlIpAddress sheSystemIpHostControlSubnetMask sheSystemIpHostControlOuterVlanId sheSystemIpHostControlInnerVlanId sheSystemIpHostControlDescription sheSystemIpHostControlOuterVlanPriority (new with R2.8 maintenance) sheSystemIpHostControlInnerVlanPriority (new with R2.8 maintenance) deleteSystemIpHost (51), sheSystemIpHostControlIndex modifySystemIpHost (52), sheSystemIpHostControlIndex sheSystemIpHostControlUseDhcp sheSystemIpHostControlIpAddress sheSystemIpHostControlSubnetMask sheSystemIpHostControlOuterVlanId sheSystemIpHostControlInnerVlanId sheSystemIpHostControlDescription sheSystemIpHostControlOuterVlanPriority (new with R2.8 maintenance) sheSystemIpHostControlInnerVlanPriority (new with R2.8 maintenance) " ::= { sheSystemIpHostControl 1 } sheSystemIpHostControlIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Table index" ::= { sheSystemIpHostControl 2 } sheSystemIpHostControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command." ::= { sheSystemIpHostControl 3 } sheSystemIpHostControlReqResult OBJECT-TYPE SYNTAX SheSystemControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheSystemIpHostControl 4 } sheSystemIpHostControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command." ::= { sheSystemIpHostControl 5 } sheSystemIpHostControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheSystemIpHostControl 6 } sheSystemIpHostControlName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "A descriptional name that uniquely identifies an entry of this table. This name was selected by the NE and identifies the interface also on CLI." ::= { sheSystemIpHostControl 7 } sheSystemIpHostControlUseDhcp OBJECT-TYPE SYNTAX SheSystemIpHostUseDhcpType MAX-ACCESS read-write STATUS current DESCRIPTION "Either to use Dhcp or not. If set to 0 (default) no DHCP will be used. Valid values: noUseDhcp(0), useDhcp(1) Note: Currently no support planed." ::= { sheSystemIpHostControl 8 } sheSystemIpHostControlIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Ipaddress if no Dhcp is used." ::= { sheSystemIpHostControl 9 } sheSystemIpHostControlSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask" ::= { sheSystemIpHostControl 10 } sheSystemIpHostControlOuterVlanId OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "The host vlan for this ip interface which should be used as outer tag in double tagging mode or in single tagging mode. Set to 0 if no host VLAN should be used." ::= { sheSystemIpHostControl 11 } sheSystemIpHostControlInnerVlanId OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "The host vlan for this ip interface which should be used as inner tag if the NE run in double tagging mode. Set to 0 if no host VLAN should be used or if the NE uses single tag mode." ::= { sheSystemIpHostControl 12 } sheSystemIpHostControlDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Could describe who uses this ip interface. This description could be used by the operator to store information about the intended interface usage. The parameter will not be evaluated by the NE." ::= { sheSystemIpHostControl 13 } sheSystemIpHostControlOuterVlanPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The used .1p priority for host vlan of this ip interface which should be used as outer tag in double tagging mode or in single tagging mode. Setting is don't care if no host VLAN should be used. New with R2.8 maintenance." ::= { sheSystemIpHostControl 14 } sheSystemIpHostControlInnerVlanPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The used .1p priority for host vlan of this ip interface which should be used as inner tag if the NE run in double tagging mode. Setting is don't care if no host VLAN should be used. New with R2.8 maintenance." ::= { sheSystemIpHostControl 15 } sheSystemIpRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SheSystemIpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains attributes for each static configured IP route. Learned routes from routing protocols will not be shown here!" ::= { sheSystemIpConfig 3 } sheSystemIpRouteEntry OBJECT-TYPE SYNTAX SheSystemIpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry represents a set of configurations in sheSystemIpRouteTable. " INDEX { sheSystemIpRouteIndex } ::= { sheSystemIpRouteTable 1 } SheSystemIpRouteEntry ::= SEQUENCE { sheSystemIpRouteIndex Unsigned32, sheSystemIpRouteName DisplayString, sheSystemIpRouteDestIpAddress IpAddress, sheSystemIpRouteSubnetMask IpAddress, sheSystemIpRouteGatewayIpAddress IpAddress, sheSystemIpRouteMetric Integer32 } sheSystemIpRouteIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Table index. Each index uniquely identifies one an Ip route table entry." ::= { sheSystemIpRouteEntry 1 } sheSystemIpRouteName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "A describable name that uniquely identifies an entry of this table. The name is user specified. Special characters like space ? . are not allowed." ::= { sheSystemIpRouteEntry 2 } sheSystemIpRouteDestIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Destination IpAddress for this route." ::= { sheSystemIpRouteEntry 4 } sheSystemIpRouteSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "subnet mask " ::= { sheSystemIpRouteEntry 5 } sheSystemIpRouteGatewayIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Gateway IpAddress for this route." ::= { sheSystemIpRouteEntry 6 } sheSystemIpRouteMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The routing metric for this route. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { sheSystemIpRouteEntry 7 } sheSystemIpRouteControl OBJECT IDENTIFIER ::= { sheSystemIpConfig 4 } sheSystemIpRouteControlRequest OBJECT-TYPE SYNTAX SheSystemIpControlReqType MAX-ACCESS read-write STATUS current DESCRIPTION "The request of a user command. createSystemIpRoute (55), sheSystemIpRouteControlName sheSystemIpRouteControlDestIpAddress sheSystemIpRouteControlGatewayIpAddress sheSystemIpRouteControlSubnetMask sheSystemIpRouteControlMetric deleteSystemIpRoute (56), sheSystemIpRouteControlIndex modifySystemIpRoute (57), sheSystemIpRouteControlIndex sheSystemIpRouteControlDestIpAddress sheSystemIpRouteControlGatewayIpAddress sheSystemIpRouteControlSubnetMask sheSystemIpRouteControlMetric" ::= { sheSystemIpRouteControl 1 } sheSystemIpRouteControlIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Table index" ::= { sheSystemIpRouteControl 2 } sheSystemIpRouteControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command." ::= { sheSystemIpRouteControl 3 } sheSystemIpRouteControlReqResult OBJECT-TYPE SYNTAX SheSystemControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheSystemIpRouteControl 4 } sheSystemIpRouteControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command." ::= { sheSystemIpRouteControl 5 } sheSystemIpRouteControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheSystemIpRouteControl 6 } sheSystemIpRouteControlName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "A describable name that uniquely identifies a entry of this table. The route name is user specified." ::= { sheSystemIpRouteControl 7 } sheSystemIpRouteControlDestIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Destination Ipaddress." ::= { sheSystemIpRouteControl 8 } sheSystemIpRouteControlSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask." ::= { sheSystemIpRouteControl 9 } sheSystemIpRouteControlGatewayIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Gateway Ipaddress ." ::= { sheSystemIpRouteControl 10 } sheSystemIpRouteControlMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The routing metric for this route. If this metric is not used, its value should be set to -1." ::= { sheSystemIpRouteControl 11 } sheSystemIpHostNotification OBJECT IDENTIFIER ::= { sheSystemIpConfig 5 } sheSystemIpHostCreated NOTIFICATION-TYPE OBJECTS { sheSystemIpHostControlIndex, sheSystemIpHostControlReqResult, sheSystemIpHostControlTimeStamp, sheSystemIpHostControlName, sheSystemIpHostControlUseDhcp, sheSystemIpHostControlIpAddress, sheSystemIpHostControlSubnetMask, sheSystemIpHostControlOuterVlanId, sheSystemIpHostControlInnerVlanId, sheSystemIpHostControlDescription, sheSystemIpHostControlOuterVlanPriority, sheSystemIpHostControlInnerVlanPriority } STATUS current DESCRIPTION "Configuration trap." ::= { sheSystemIpHostNotification 1 } sheSystemIpHostDeleted NOTIFICATION-TYPE OBJECTS { sheSystemIpHostControlIndex, sheSystemIpHostControlTimeStamp } STATUS current DESCRIPTION "Configuration trap." ::= { sheSystemIpHostNotification 2 } sheSystemIpHostModified NOTIFICATION-TYPE OBJECTS { sheSystemIpHostControlIndex, sheSystemIpHostControlReqResult, sheSystemIpHostControlTimeStamp, sheSystemIpHostControlName, sheSystemIpHostControlUseDhcp, sheSystemIpHostControlIpAddress, sheSystemIpHostControlSubnetMask, sheSystemIpHostControlOuterVlanId, sheSystemIpHostControlInnerVlanId, sheSystemIpHostControlDescription, sheSystemIpHostControlOuterVlanPriority, sheSystemIpHostControlInnerVlanPriority } STATUS current DESCRIPTION "Configuration trap." ::= { sheSystemIpHostNotification 3 } sheSystemIpRouteCreated NOTIFICATION-TYPE OBJECTS { sheSystemIpRouteControlIndex, sheSystemIpRouteControlReqResult, sheSystemIpRouteControlTimeStamp, sheSystemIpRouteControlName, sheSystemIpRouteControlDestIpAddress, sheSystemIpRouteControlSubnetMask, sheSystemIpRouteControlGatewayIpAddress, sheSystemIpRouteControlMetric } STATUS current DESCRIPTION "Configuration trap." ::= { sheSystemIpHostNotification 4 } sheSystemIpRouteDeleted NOTIFICATION-TYPE OBJECTS { sheSystemIpRouteControlIndex, sheSystemIpRouteControlTimeStamp } STATUS current DESCRIPTION "Configuration trap." ::= { sheSystemIpHostNotification 5 } sheSystemIpRouteModified NOTIFICATION-TYPE OBJECTS { sheSystemIpRouteControlIndex, sheSystemIpRouteControlReqResult, sheSystemIpRouteControlTimeStamp, sheSystemIpRouteControlName, sheSystemIpRouteControlDestIpAddress, sheSystemIpRouteControlSubnetMask, sheSystemIpRouteControlGatewayIpAddress, sheSystemIpRouteControlMetric } STATUS current DESCRIPTION "Configuration trap." ::= { sheSystemIpHostNotification 6 } sheSystemConformance OBJECT IDENTIFIER ::= { sheSystem 100 } sheSystemGroups OBJECT IDENTIFIER ::= { sheSystemConformance 1 } sheSystemGroup OBJECT-GROUP OBJECTS { sheSystemFeatureIndex, sheSystemFeatureName, sheSystemFileSwfIndex, sheSystemFileSwfFileName, sheSystemFileSwfTypeOfFile, sheSystemFileSwfVersion, sheSystemFileSwfSize, sheSystemFileSwfTimeStamp, sheSystemDbBackupFileIndex, sheSystemDbBackupFileName, sheSystemManagementSessionIndex, sheSystemManagementSessionType, sheSystemManagementSessionSnmpExpiredTime, sheSystemManagementSessionAddress, sheSystemDnsServerIndex, sheSystemDnsServerAddr, sheSystemNtpClientServerIndex, sheSystemNtpClientServerName, sheSystemDbBackupFileTimeStamp, sheSystemSwmTIndex, sheSystemSwmTCardType, sheSystemSwmTEntPhysicalIndex, sheSystemSwmTTimeStamp, sheSystemSwmTUpgradeState, sheSystemSwmTUpgradeResult, sheSystemSwmTSwVersion, sheSystemSwmTSwVersionNeed } STATUS current DESCRIPTION " " ::= { sheSystemGroups 1 } sheSystemControlGroup OBJECT-GROUP OBJECTS { sheSystemVersion, sheSystemExternalTime, sheSystemStartupType, sheSystemTmnConnected, sheSystemLctConnected, sheSystemControlRequest, sheSystemControlStatus, sheSystemControlTimer, sheSystemControlReqResult, sheSystemControlTimeStamp, sheSystemControlExternalTime, sheSystemCliConnected, sheSystemFileControlRequest, sheSystemFileControlStatus, sheSystemFileControlTimer, sheSystemFileControlReqResult, sheSystemFileControlTimeStamp, sheSystemFileControlTypeOfFile, sheSystemFileControlPathName, sheSystemFileControlFileName, sheSystemFileControlCardType, sheSystemFileControlEntPhysicalIndex, sheSystemFileControlLoadStatus, sheSystemFileControlServerAddr, sheSystemFileControlUsrName, sheSystemFileControlPassword, sheSystemNotificationCounter, sheSystemSwmSapsServerAddr, sheSystemSwmSapsPathName, sheSystemSwmSapsFileName, sheSystemSwmAdminState, sheSystemSwmControlSapsServerAddr, sheSystemSwmControlSapsPathName, sheSystemSwmControlSapsFileName, sheSystemSwmControlSapsUsrName, sheSystemSwmControlSapsPassword, sheSystemSwmControlAdminState, sheSystemDbmServerAddr, sheSystemDbmPathName, sheSystemDbmRemoteBackupAdminState, sheSystemDbmBackupPeriod, sheSystemDbmBackupStartTime, sheSystemDbmBackupWaitingPeriod, sheSystemDbmBackupMaxFileNumber, sheSystemDbmLocalBackupAdminState, sheSystemDbmControlRequest, sheSystemDbmControlStatus, sheSystemDbmControlTimer, sheSystemDbmControlReqResultLocal, sheSystemDbmControlReqResultRemote, sheSystemDbmControlTimeStamp, sheSystemDbmControlServerAddr, sheSystemDbmControlPathName, sheSystemDbmControlUsrName, sheSystemDbmControlPassword, sheSystemDbmControlRemoteBackupAdminState, sheSystemDbmControlBackupPeriod, sheSystemDbmControlBackupStartTime, sheSystemDbmControlBackupWaitingPeriod, sheSystemDbmControlBackupMaxFileNumber, sheSystemDbmControlLocalBackupAdminState, sheSystemNtpClientEnabled, sheSystemNtpClientXmitInterval, sheSystemManagementSessionControlRequest, sheSystemManagementSessionControlStatus, sheSystemManagementSessionControlTimer, sheSystemManagementSessionControlReqResult, sheSystemManagementSessionControlTimeStamp, sheSystemManagementSessionControlSnmpAgingTime, sheSystemConfigLogEntryNumber, sheSystemConfigLogFtpUser, sheSystemConfigLogFtpPassword, sheSystemConfigLogFtpInterval, sheSystemConfigLogFtpPathName, sheSystemConfigLogControlRequest, sheSystemConfigLogControlEntryNumber, sheSystemConfigLogControlFtpAddress, sheSystemConfigLogControlFtpUser, sheSystemConfigLogControlFtpPassword, sheSystemConfigLogControlFtpInterval, sheSystemConfigLogControlFtpPathName, sheSystemDnsServerControlRequest, sheSystemDnsServerControlStatus, sheSystemDnsServerControlTimer, sheSystemDnsServerControlReqResult, sheSystemDnsServerControlTimeStamp, sheSystemDnsServerControlAddr, sheSystemDnsServerControlIndex, sheSystemManagementSessionSnmpAgingTime, sheSystemNtpClientControlRequest, sheSystemNtpClientControlStatus, sheSystemNtpClientControlTimer, sheSystemNtpClientControlReqResult, sheSystemNtpClientControlTimeStamp, sheSystemNtpClientControlXmitInterval, sheSystemSwmControlRequest, sheSystemSwmControlStatus, sheSystemSwmControlTimer, sheSystemSwmControlReqResult, sheSystemSwmControlTimeStamp, sheSystemNtpClientControlServerIndex, sheSystemControlTimeZone, sheSystemControlCPUThreshold, sheSystemControlCPUThresholdInterval, sheSystemControlMemoryThreshold, sheSystemControlMemoryThresholdInterval, sheSystemTimeZone, sheSystem5SecCPULoad, sheSystem1MinCPULoad, sheSystem10MinCPULoad, sheSystemCPULoadThreshold, sheSystemCPULoadThresholdInterval, sheSystemTotalMemory, sheSystemUsedMemory, sheSystemFreeMemory, sheSystemMemoryThreshold, sheSystemMemoryThresholdInterval, sheSystemBootloaderVersion, sheSystemStartupResult, sheSystemDbmControlBackupFileIndex, sheSystemConfigLogControlReqResult, sheSystemConfigLogControlStatus, sheSystemConfigLogControlTimeStamp, sheSystemSwmCurrentStatus, sheSystemConfigLogFtpServerAddress, sheSystemNtpClientControlServername } STATUS current DESCRIPTION " " ::= { sheSystemGroups 2 } sheSystemNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheSystemStartupEnd, sheSystemFtp, sheSystemSwLoadPromoted, sheSystemSwLoadPromotionFailed, sheSystemLctSession, sheSystemWriteDatatoFlashFinished, sheSystemCliSession, sheSystemSwmBaseSet, sheSystemReadSAPSContentFileReady, sheSystemDbmBaseSet, sheSystemDbmBackupFilesTableRefreshed, sheSystemDbmBackupPeriodSet, sheSystemDbmLocalBackupAdminstateSet, sheSystemLocalDbInvalid, sheSystemRemoteDbInvalid, sheSystemDbFtpAccessError, sheSystemSwmFtpExternalAccessError, sheSystemChangedCPULoadThreshold, sheSystemChangedMemoryThreshold, sheSystemCPULoadThresholdExceeded, sheSystemMemoryThresholdExceeded, sheSystemNtpClientEnable, sheSystemNtpClientDisable, sheSystemNtpClientChangeXmitInterval, sheSystemNtpClientAddServerName, sheSystemNtpClientDeleteServerName, sheSystemDnsServerAddAddr, sheSystemDnsServerDeleteAddr, sheSystemManagementSessionConnection, sheSystemManagementSessionDisconnection, sheSystemManagementSessionChangedSnmpAgingTime, sheSystemConfigLogEntryNumberChanged, sheSystemConfigLogFtpLoginInfoChanged, sheSystemConfigLogFtpIntervalChanged, sheSystemSwmCurrentStatusChanged, sheSystemSwmStatusError, sheSystemDbmRemoteBackupAdminstateSet, sheSystemSwmAdminStateSet, sheSystemSwmReadyForReset, sheSystemSwmFTPError, sheSystemSwmUpgradeStartResult, sheSystemSwmFtpAccessError, sheSystemDbmResult } STATUS current DESCRIPTION " " ::= { sheSystemGroups 3 } sheSystemIpGroup OBJECT-GROUP OBJECTS { sheSystemIpHostIndex, sheSystemIpHostName, sheSystemIpHostUseDhcp, sheSystemIpHostIpAddress, sheSystemIpHostSubnetMask, sheSystemIpHostOuterVlanId, sheSystemIpHostInnerVlanId, sheSystemIpHostControlRequest, sheSystemIpHostControlIndex, sheSystemIpHostControlStatus, sheSystemIpHostControlReqResult, sheSystemIpHostControlTimer, sheSystemIpHostControlTimeStamp, sheSystemIpHostControlName, sheSystemIpHostControlUseDhcp, sheSystemIpHostControlIpAddress, sheSystemIpHostControlSubnetMask, sheSystemIpHostControlOuterVlanId, sheSystemIpHostControlInnerVlanId, sheSystemIpRouteIndex, sheSystemIpRouteName, sheSystemIpRouteDestIpAddress, sheSystemIpRouteSubnetMask, sheSystemIpRouteGatewayIpAddress, sheSystemIpRouteControlRequest, sheSystemIpRouteControlIndex, sheSystemIpRouteControlStatus, sheSystemIpRouteControlReqResult, sheSystemIpRouteControlTimer, sheSystemIpRouteControlTimeStamp, sheSystemIpRouteControlName, sheSystemIpRouteControlDestIpAddress, sheSystemIpRouteControlSubnetMask, sheSystemIpRouteMetric, sheSystemIpRouteControlMetric, sheSystemIpHostOuterVlanPriority, sheSystemIpHostInnerVlanPriority, sheSystemIpHostControlOuterVlanPriority, sheSystemIpHostControlInnerVlanPriority, sheSystemIpRouteControlGatewayIpAddress, sheSystemIpHostDescription, sheSystemIpHostControlDescription } STATUS current DESCRIPTION "Description." ::= { sheSystemGroups 4 } sheSystemIpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheSystemIpHostCreated, sheSystemIpHostDeleted, sheSystemIpHostModified, sheSystemIpRouteCreated, sheSystemIpRouteDeleted, sheSystemIpRouteModified } STATUS current DESCRIPTION "Description." ::= { sheSystemGroups 5 } sheSystemObsoleteGroup OBJECT-GROUP OBJECTS { sheSystemAutoConfigBackupEnabled, sheSystemAutoConfigBackupFtpServerAddress, sheSystemAutoConfigBackupFtpUser, sheSystemAutoConfigBackupFtpPassword, sheSystemAutoConfigBackupFtpPathName, sheSystemAutoConfigBackupTime, sheSystemAutoConfigBackupControlRequest, sheSystemAutoConfigBackupControlEnabled, sheSystemAutoConfigBackupControlFtpServerAddress, sheSystemAutoConfigBackupControlFtpUser, sheSystemAutoConfigBackupControlFtpPassword, sheSystemAutoConfigBackupControlFtpPathName, sheSystemAutoConfigBackupControlBackupTime } STATUS current DESCRIPTION "Description." ::= { sheSystemGroups 6 } sheSystemObsoleteNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheSystemAutoConfigBackupEnabledChanged, sheSystemAutoConfigBackupFtpLoginInfoChanged, sheSystemAutoConfigBackupTimeChanged } STATUS current DESCRIPTION "Description." ::= { sheSystemGroups 7 } sheSystemCompliances OBJECT IDENTIFIER ::= { sheSystemConformance 2 } sheSystemCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which manage VDSL interfaces in SHE." MODULE -- this module MANDATORY-GROUPS { sheSystemGroup, sheSystemControlGroup, sheSystemNotificationGroup, sheSystemIpGroup, sheSystemIpNotificationGroup } GROUP sheSystemObsoleteGroup DESCRIPTION "Not used by SHR R2.5.x..." GROUP sheSystemObsoleteNotificationGroup DESCRIPTION "Not used by SHR R2.5.x..." ::= { sheSystemCompliances 1 } END -- -- she-system-mib.mib --