SHE-PM-DR-MIB

All MIBs › SHE-PM-DR-MIB

Organization: Nokia Siemens Networks

Last Updated: 2008-09-17

Description: Nokia Siemens Networks SHE DSLAM performance management data retrieval via FTP, including upload control, result notifications, and scheduling for PM files

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SHE-PM-DR-MIB?

SHE-PM-DR-MIB is a Nokia Siemens Networks module for the SHE/hiX DSLAM platform that manages Performance Management Data Retrieval (PM-DR) via FTP — the mechanism by which bulk performance-monitoring files collected on the access node are uploaded to an external management system. It defines objects controlling FTP upload triggering, scheduling, and completion-notification for PM data files rather than the performance counters themselves. Its monitoring value is operational/software: it lets an operator confirm PM file uploads are completing successfully and on schedule, and receive notification of failures, which matters because it is the delivery mechanism for the line/port performance counters gathered elsewhere on the same DSLAM. It is closely coupled to the DSLAM's other performance-counter MIBs (such as SHE-XDSL-MIB and SHE-SHDSL-MIB), whose collected PM data it transports off-box. It is deployed on Nokia Siemens Networks hiX-series DSLAM access nodes as part of the broader performance-management/reporting pipeline in a broadband access network. Engineers can download the SHE-PM-DR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SHE-PM-DR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia Siemens Networks SHE/hiX-series DSLAM access node

Monitoring Examples

No specific object/table names were captured in this extract, but per the module description an operator would configure and monitor FTP upload jobs for PM data files — checking upload-result notification objects to confirm a scheduled PM-DR transfer completed successfully, and investigating a failed or overdue upload before it causes a gap in the performance-history archive for that DSLAM's lines.

What Can Be Monitored

PM data file upload status
upload scheduling configuration
upload result/failure notifications

Imported Objects

From AN-SHE-MIB

she	OBJECT-IDENTITY

From SHE-TC-MIB

SheControlStatusType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
shePmDrMib	1.3.6.1.4.1.231.7.1.2.2.1.30			The MIB module describes managed objects that support PM Data Retrieval (PM-DR) through FTP.
shePmDrInfo	1.3.6.1.4.1.231.7.1.2.2.1.30.1
shePmDrParameters	1.3.6.1.4.1.231.7.1.2.2.1.30.1.1
STR shePmDrRootDir	1.3.6.1.4.1.231.7.1.2.2.1.30.1.1.1	SnmpAdminString	read-only	The root directory name on FTP server that stores the PM data of this DSLAM. It is the relative path to the ftproot, eg. 'hix5635/v1.5' The directory structure looks like: ftproot <-- data files \| \| \|- suport <-- stores data for SU ports \| \| \|- uplink <-- stores data for uplink ports \| \| \|- periodically <-- stores periodical data
IP shePmDrFtpIp	1.3.6.1.4.1.231.7.1.2.2.1.30.1.1.2	IpAddress	read-only	FTP server's IP address.
STR shePmDrFtpUser	1.3.6.1.4.1.231.7.1.2.2.1.30.1.1.3	SnmpAdminString	read-only	FTP user name. Write permission is required for this user.
OCT shePmDrFtpPassword	1.3.6.1.4.1.231.7.1.2.2.1.30.1.1.4	OCTET STRING	read-only	FTP server access password. To protect the password, the string of this object in the GetResponse PDU is encrypted.
INT shePmDrUploadInterval	1.3.6.1.4.1.231.7.1.2.2.1.30.1.1.5	INTEGER	read-only	The interval that PM data is uploaded to FTP server. It increases with step of 15 minutes. The minimum value 1 means 15 minutes, while the maximum value 96 means the max interval is 24 hours.
T/F shePmDrUploadEnabled	1.3.6.1.4.1.231.7.1.2.2.1.30.1.1.6	TruthValue	read-only	Whether the FTP upload process is enabled.
shePmDrControl	1.3.6.1.4.1.231.7.1.2.2.1.30.1.2
SHE shePmDrControlRequest	1.3.6.1.4.1.231.7.1.2.2.1.30.1.2.1	ShePmDrControlRequestType	read-write	Command (setUploadParameters) to configure the PM Data Retrieval upload parameters. It must be the last member in the varBindList of the SNMP set request. The parameters of this command are: shePmDrControlRootDir shePmDrControlFtpIp shePmDrControlFtpUser shePmDrControlFtpPassword shePmDrControlUploadInterval shePmDrControlUploadEnabled They are optional in the varBindList of set PDU, but at least one of them should be there. Notifications: shePmDrControlResult at the command ending in case of long running command. The long running command refers to the case that shePmDrUploadEnabled is changed from disable to enable. NE will verify the FTP connection at the enabling moment. Besides, the RootDir and four subdirs are created if they do not exist yet. EM should GET shePmDrControlReqResult when the Response of the SET PDU is received, and the error status is noError. If the value of shePmDrControlReqResult is comExecStarted(30), which means the SET operation is a long running command, EM must issue another GET operation on shePmDrControlTimer. A timer should start on EM with the expire time equals to the value of shePmDrControlTimer. The shePmDrControlResult trap is expected to reach EM within the specified time. When the trap is received by EM, EM can optionally GET shePmDrControlReqResult, shePmDrControlStatus, and shePmDrControlTimeStamp.
SHE shePmDrControlStatus	1.3.6.1.4.1.231.7.1.2.2.1.30.1.2.2	SheControlStatusType	read-only	The status of a control request.
U32 shePmDrControlTimer	1.3.6.1.4.1.231.7.1.2.2.1.30.1.2.3	Unsigned32	read-only	The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE.
SHE shePmDrControlReqResult	1.3.6.1.4.1.231.7.1.2.2.1.30.1.2.4	ShePmDrControlRequestResultType	read-only	The result of the last user command.
U32 shePmDrControlTimeStamp	1.3.6.1.4.1.231.7.1.2.2.1.30.1.2.5	Unsigned32	read-only	The time stamp of the last command (end of command).
STR shePmDrControlRootDir	1.3.6.1.4.1.231.7.1.2.2.1.30.1.2.6	SnmpAdminString	read-write	The root directory name on FTP server that stores the PM data of this DSLAM. Change the value of shePmDrRootDir.
IP shePmDrControlFtpIp	1.3.6.1.4.1.231.7.1.2.2.1.30.1.2.7	IpAddress	read-write	FTP server's IP address. Change the value of shePmDrFtpIp.
STR shePmDrControlFtpUser	1.3.6.1.4.1.231.7.1.2.2.1.30.1.2.8	SnmpAdminString	read-write	FTP user name. Change the value of shePmDrFtpUser.
OCT shePmDrControlFtpPassword	1.3.6.1.4.1.231.7.1.2.2.1.30.1.2.9	OCTET STRING	read-write	FTP server access password. To protect the password, the string of this object in the GetResponse PDU is encrypted.
INT shePmDrControlUploadInterval	1.3.6.1.4.1.231.7.1.2.2.1.30.1.2.10	INTEGER	read-write	The interval that PM data is uploaded to FTP server. Change the value of shePmDrUploadInterval.
T/F shePmDrControlUploadEnabled	1.3.6.1.4.1.231.7.1.2.2.1.30.1.2.11	TruthValue	read-write	Whether the FTP upload process is enabled. Change the value of shePmDrUploadEnabled. If the shePmDrUploadEnabled is changed from disable to enable, FTP connection will be verified at the enabling moment. Besides, the RootDir and four subdirs are created if they do not exist yet. The command in this case is a long running command. shePmDrControlResult trap will be sent to EM to notify the command result.
shePmDrUploadInfo	1.3.6.1.4.1.231.7.1.2.2.1.30.1.3
SHE shePmDrLastUploadStatus	1.3.6.1.4.1.231.7.1.2.2.1.30.1.3.1	ShePmDrUploadStatusType	read-only	The status of last FTP upload operation. It could be uploadSuccess(1) or uploadFail(2).
TIK shePmDrLastUploadTimeStamp	1.3.6.1.4.1.231.7.1.2.2.1.30.1.3.2	TimeTicks	read-only	The time stamp of the last FTP upload operation (end of operation).
STR shePmDrLastUploadFileName	1.3.6.1.4.1.231.7.1.2.2.1.30.1.3.3	SnmpAdminString	read-only	The file name of last FTP upload operation.
STR shePmDrLastUploadErrorString	1.3.6.1.4.1.231.7.1.2.2.1.30.1.3.4	SnmpAdminString	read-only	The text that describes the FTP upload failure. If upload succeeded, this string is empty.
shePmDrNotifications	1.3.6.1.4.1.231.7.1.2.2.1.30.2
shePmDrEvents	1.3.6.1.4.1.231.7.1.2.2.1.30.2.1
NTF shePmDrControlResult	1.3.6.1.4.1.231.7.1.2.2.1.30.2.1.1			Notification sent at the end of long running command. The possible values of shePmDrControlReqResult are: wrongIpAddress(2), -- IP address of FTP servre is incorrect wrongUserPassword(3), -- The user name or password is wrong permissionDenied(4), -- The user name has no permission to create dir/file commandSucceeded(37)
NTF shePmDrUploadFailed	1.3.6.1.4.1.231.7.1.2.2.1.30.2.1.2			Indicates that an FTP upload failure occurred.
shePmDrMibConformance	1.3.6.1.4.1.231.7.1.2.2.1.30.100
shePmDrMibCompliances	1.3.6.1.4.1.231.7.1.2.2.1.30.100.1
shePmDrMibCompliance	1.3.6.1.4.1.231.7.1.2.2.1.30.100.1.1			Description.
shePmDrMibGroups	1.3.6.1.4.1.231.7.1.2.2.1.30.100.2
shePmDrMibGroup	1.3.6.1.4.1.231.7.1.2.2.1.30.100.2.1			Description.
shePmDrMibControlGroup	1.3.6.1.4.1.231.7.1.2.2.1.30.100.2.2			Description.
shePmDrMibNotificationGroup	1.3.6.1.4.1.231.7.1.2.2.1.30.100.2.3			Description.

RFC description

Nokia Siemens Networks MIB for PM Data Retrieval (PM-DR) management, enabling retrieval of performance management data through FTP.

Start monitoring Nokia Siemens Networks SHE/hiX-series DSLAM access node (performance-data FTP retrieval scheduling/status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SHE-PM-DR-MIB

What Is SHE-PM-DR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description