SERVERVIEW-STATUS-MIB

All MIBs › SERVERVIEW-STATUS-MIB

Category: Fujitsu ServerView Server Management

Description: Provides Fujitsu ServerView overall server status aggregation and component health summary.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SERVERVIEW-STATUS-MIB?

SERVERVIEW-STATUS-MIB is a Fujitsu MIB that provides an aggregated, top-level status summary for a server managed by the Fujitsu ServerView systems-management agent, rolling up the health of individual hardware subsystems into one overall status value. It exposes agent identification data (company, version, build) alongside a system-wide status value, a last-error message, and a table enumerating each monitored subsystem. This makes it squarely a hardware/software health-monitoring MIB: sieStSystemStatusValue gives an at-a-glance overall server health state (e.g. OK, warning, critical) while sieStSubsystemTable breaks that down per component (such as power supplies, fans, temperature sensors, or disks depending on the underlying ServerView subsystem MIBs). It depends on and summarizes data collected by the broader Fujitsu ServerView SNMP agent MIB family covering individual component MIBs (fans, power, storage, etc.), acting as a roll-up rather than a primary data source. It is typically deployed on Fujitsu PRIMERGY servers where ServerView Agent software is installed to provide unified SNMP-based hardware health monitoring. Engineers can download the SERVERVIEW-STATUS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SERVERVIEW-STATUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fujitsu PRIMERGY server running ServerView Agent

Monitoring Examples

An administrator would poll sieStSystemStatusValue as a quick health check across many Fujitsu servers, then drill into sieStSubsystemTable/sieStSubsystemNumber to identify which specific subsystem (e.g. power, thermal, storage) triggered a degraded status. sieStSystemLastErrorMessage would be checked to get a human-readable description of the most recent fault, useful for a monitoring dashboard that needs a quick-glance alert without polling every individual component MIB. sieStAgentVersionString and sieStAgentBuild help confirm the ServerView agent software version when troubleshooting inconsistent reporting.

What Can Be Monitored

overall system status
last error message
subsystem count and list
agent version/build
subsystem-level status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
enterprises

From RFC1213-MIB

DisplayString
mib-2

OIDs

OID symbolic	OID numeric	Type	Access	Description
sni	1.3.6.1.4.1.231
sniProductMibs	1.3.6.1.4.1.231.2
sniExtensions	1.3.6.1.4.1.231.2.10
sniServerMgmt	1.3.6.1.4.1.231.2.10.2
NTF sieStTrapStatusChanged	1.3.6.1.4.1.231.2.10.2.0.1100			System status has changed.
sniInventory	1.3.6.1.4.1.231.2.10.2.1
sniCommon	1.3.6.1.4.1.231.2.10.2.2
sniBios	1.3.6.1.4.1.231.2.10.2.2.1
sniEisa	1.3.6.1.4.1.231.2.10.2.2.2
sniHd	1.3.6.1.4.1.231.2.10.2.2.3
sniBus	1.3.6.1.4.1.231.2.10.2.2.4
sniServerControl	1.3.6.1.4.1.231.2.10.2.2.5
sniPcSpecific	1.3.6.1.4.1.231.2.10.2.3
sniScb	1.3.6.1.4.1.231.2.10.2.4
sniOsSpecific	1.3.6.1.4.1.231.2.10.2.5
sniNetware	1.3.6.1.4.1.231.2.10.2.5.1
sniWinNt	1.3.6.1.4.1.231.2.10.2.5.2
sniOs2	1.3.6.1.4.1.231.2.10.2.5.3
sniUnix	1.3.6.1.4.1.231.2.10.2.5.4
sniOemComponents	1.3.6.1.4.1.231.2.10.2.6
sniOemDpt	1.3.6.1.4.1.231.2.10.2.6.1
sniOemMylex	1.3.6.1.4.1.231.2.10.2.6.2
sniMlxDiskArray	1.3.6.1.4.1.231.2.10.2.6.2.1
sniSecurity	1.3.6.1.4.1.231.2.10.2.7
sniSmSecurity	1.3.6.1.4.1.231.2.10.2.7.1
sniServerView	1.3.6.1.4.1.231.2.10.2.8
sieStatusAgent	1.3.6.1.4.1.231.2.10.2.11
sieStAgentInfo	1.3.6.1.4.1.231.2.10.2.11.1
STR sieStAgentId	1.3.6.1.4.1.231.2.10.2.11.1.1	DisplayString	read-only	Agent identification string
STR sieStAgentCompany	1.3.6.1.4.1.231.2.10.2.11.1.2	DisplayString	read-only	Agent company name
STR sieStAgentVersionString	1.3.6.1.4.1.231.2.10.2.11.1.3	DisplayString	read-only	Agent version string . (i.e. 1.05)
STR sieStAgentBuild	1.3.6.1.4.1.231.2.10.2.11.1.4	DisplayString	read-only	Build time and date of agent program implementation
sieStSystemStatus	1.3.6.1.4.1.231.2.10.2.11.2
INT sieStSystemStatusValue	1.3.6.1.4.1.231.2.10.2.11.2.1	INTEGER	read-only	Overall status of this system: ok(1): all subsystems and components working properly, no failure degraded(2): redundant components failed or signal a warning error(3): severe problem, system may no longer work properly failed(4): this value is obsolete - will no longer appear unknown(5): none of the subsystems had a valid status (e.g. during initialization)
STR sieStSystemLastErrorMessage	1.3.6.1.4.1.231.2.10.2.11.2.2	DisplayString	read-only	Error message text of the component that has failed last. Empty string, if no error has happened since reboot. This object is not supported by all components and can therefore be empty although an error happened.
STR sieStSubsystemList	1.3.6.1.4.1.231.2.10.2.11.2.3	DisplayString	read-only	List if subsystems included in this system, separated by blank spaces. E.g. 'Environment PowerSupply MassStorage'
INT sieStSystemIdentify	1.3.6.1.4.1.231.2.10.2.11.2.4	INTEGER	read-write	Sets the signal IDENTIFY for the system: off(1): clear the identify signal / signal is off on(2): set the IDENTIFY signal not-available(3): identify signal ist not available (this value cannot be set) blinking(4): IDENTIFY LED blinking, used for different purposes Setting IDENTIFY by the ServerView application normally sets a LED to have the possibility to identify a system selected by ServerView.
sieStSubsystemStatus	1.3.6.1.4.1.231.2.10.2.11.3
sieStSubsystemTable	1.3.6.1.4.1.231.2.10.2.11.3.1		not-accessible	Table containing the monitored subsystems
sieStSubsystems	1.3.6.1.4.1.231.2.10.2.11.3.1.1		not-accessible
INT sieStSubsystemNumber	1.3.6.1.4.1.231.2.10.2.11.3.1.1.1	INTEGER	read-only	Subsystem number (index, 1..n)
STR sieStSubsystemName	1.3.6.1.4.1.231.2.10.2.11.3.1.1.2	DisplayString	read-only	Subsystem name. This name identifies the subsystem and will never be changed if once defined. This name is a string like 'Environment', 'PowerSupply', 'MassStorage' etc.
INT sieStSubsystemStatusValue	1.3.6.1.4.1.231.2.10.2.11.3.1.1.3	INTEGER	read-only	Subsystem status value: ok(1): all components in this subsystem working properly degraded(2): redundant components failed or signal a warning error(3): severe problem, system may no longer work properly failed(4): this value is obsolete - will no longer appear unknown(5): none of the components had a valid status (initialization, no components)
STR sieStSubsystemLastErrorMessage	1.3.6.1.4.1.231.2.10.2.11.3.1.1.4	DisplayString	read-only	Error message text of the component that has failed last. Empty string, if no error has happened since reboot. This object is not supported by all components and can therefore be empty although an error happened.
STR sieStSubsystemComponents	1.3.6.1.4.1.231.2.10.2.11.3.1.1.5	DisplayString	read-only	List if components (short names) included in this subsystem, separated by blank spaces; e.g. 'SvPowerSupply OemUpsAPC'
STR sieStSubsystemDisplayName	1.3.6.1.4.1.231.2.10.2.11.3.1.1.6	DisplayString	read-only	Subsystem display name string.
INT sieStNumberSubsystems	1.3.6.1.4.1.231.2.10.2.11.3.2	INTEGER	read-only	Number of available subsystems; this is the number of entries in the subsystem table
sieStComponentStatus	1.3.6.1.4.1.231.2.10.2.11.4
sieStComponentTable	1.3.6.1.4.1.231.2.10.2.11.4.1		not-accessible	Table containing the monitored components
sieStComponents	1.3.6.1.4.1.231.2.10.2.11.4.1.1		not-accessible
INT sieStComponentNumber	1.3.6.1.4.1.231.2.10.2.11.4.1.1.1	INTEGER	read-only	Component number (index, 1..n)
STR sieStComponentName	1.3.6.1.4.1.231.2.10.2.11.4.1.1.2	DisplayString	read-only	Component name/tag. This name identifies the component and will never be changed if once defined. This name is a string like 'SvEnvironment', 'SvVoltages', 'OemUpsAPC' etc.
INT sieStComponentStatusValue	1.3.6.1.4.1.231.2.10.2.11.4.1.1.3	INTEGER	read-only	Component status value: ok(1): component is working properly degraded(2): redundant component has failed or signals a warning error(3): severe problem, system may no longer work properly failed(4): this value is obsolete - will no longer appear unknown(5): component had no valid status (initialization, no instances) notPresent(6): component is not present (e.g. empty socket) notManageable(7): component is not manageable
STR sieStComponentLastErrorMessage	1.3.6.1.4.1.231.2.10.2.11.4.1.1.4	DisplayString	read-only	Error message text of the current component. Empty string, if no error has happened since reboot. This object is not supported by all components and can therefore be empty although an error happened.
STR sieStComponentDisplayName	1.3.6.1.4.1.231.2.10.2.11.4.1.1.5	DisplayString	read-only	Component display name string.
INT sieStComponentConfirmFailure	1.3.6.1.4.1.231.2.10.2.11.4.1.1.6	INTEGER	read-write	Confirm a failure status of a component that does not automatically reset its status (e.g. BIOS selftest error). The error condition is removed after the failure has been confirmed. GET values: 0 - no failure to confirm; SET not possible >0 - component failure; SET a zero value to confirm SET values: 0 - confirm failure and remove error condition (setting other values than 0 is not possible)
INT sieStNumberComponents	1.3.6.1.4.1.231.2.10.2.11.4.2	INTEGER	read-only	Number of available components; this is the number of entries in the component table
sieStAgentParameters	1.3.6.1.4.1.231.2.10.2.11.5
STR sieStAgentType	1.3.6.1.4.1.231.2.10.2.11.5.1	DisplayString	read-only	Type of agent (i.e. 'Desktop' or 'Server'). This field can be used to launch the correct management front end application (DeskView or ServerView) in enterprise management systems.
sieStTrapParameters	1.3.6.1.4.1.231.2.10.2.11.10
STR sieStTrapParamServerName	1.3.6.1.4.1.231.2.10.2.11.10.1	DisplayString	not-accessible	Name of server the trap occured at
INT sieStTrapParamTimestamp	1.3.6.1.4.1.231.2.10.2.11.10.2	INTEGER	not-accessible	Time the trap occured (in seconds since 01/01/1970 00:00h)
sniTrapMib	1.3.6.1.4.1.231.2.10.5

RFC description

Fujitsu ServerView status MIB for Fujitsu Siemens servers providing system inventory and status monitoring.

Start monitoring Fujitsu PRIMERGY server running ServerView Agent (aggregated overall system health status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SERVERVIEW-STATUS-MIB

What Is SERVERVIEW-STATUS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description