SCCRAID7-PROXY-MIB

All MIBs › SCCRAID7-PROXY-MIB

Category: RAID and Storage Management

Description: Provides proxy access objects for remote SCC RAID7 array management via an agent.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SCCRAID7-PROXY-MIB?

SCCRAID7-PROXY-MIB provides SNMP proxy access objects for managing an SCC RAID7 storage array indirectly through an intermediary proxy agent. It exposes link-level statistics and status for the interconnect between the proxy agent and the array, including named link status, inactivity time, and RX/TX byte and frame counters, along with cache lifetime/timeout settings. Its monitoring value spans both hardware and software status: link status and traffic counters reveal interconnect health, cache timeout and bad-value counters flag data-path problems within the array, and the proxy/agent version objects confirm which proxy software build is running. It depends on an underlying SNMP proxy agent mechanism and is closely tied to the broader SCC RAID MIB family for the array it fronts. It is typically deployed in enterprise/data-center storage environments where an SCC RAID7 array is managed remotely via an SNMP proxy rather than direct SNMP support. Engineers can download the SCCRAID7-PROXY-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SCCRAID7-PROXY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

SCC RAID7 storage array (accessed via SNMP proxy agent)

Monitoring Examples

An admin polls raid7LinkStatus per raid7LinkName to detect an inter-controller or host link that has gone down, monitors raid7LinkRcvBytes/raid7LinkXmtBytes and raid7LinkRcvFrames/raid7LinkXmtFrames for throughput and possible frame-level errors, and checks raid7CacheTimeouts/raid7BadValues to catch cache flush timeouts or invalid data returned by the underlying RAID7 array through the proxy; raid7proxyAgentVersion and raid7proxyMibVersion confirm which proxy agent software version is running.

What Can Be Monitored

link status per named link
link inactivity time
link RX/TX byte counters
link RX/TX frame counters
cache timeout/lifetime events
proxy agent and MIB version

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge

From RFC1213-MIB

DisplayString

From SCC-ENTERPRISE-MIB

raid7proxy

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF raid7LinkUp	1.3.6.1.4.1.1386.2.2.0.1			This trap is sent whenever the link becomes operational.
NTF raid7LinkDown	1.3.6.1.4.1.1386.2.2.0.2			This trap is sent whenever the link status changes from operational to quiet.
raid7Agent	1.3.6.1.4.1.1386.2.2.1
INT raid7proxyMibVersion	1.3.6.1.4.1.1386.2.2.1.1	INTEGER	read-only	The version of this proxy MIB.
INT raid7proxyAgentVersion	1.3.6.1.4.1.1386.2.2.1.2	INTEGER	read-only	The version of the Proxy Agent software
GAU raid7CacheLifetime	1.3.6.1.4.1.1386.2.2.1.3	Gauge	read-only	The time in seconds that the agent will treat a value from the RAID7 as valid. When this time is exceeded for any object, the value of that object will be considered invalid and will return GenError (NoSuchObject will be returned only for oids that are never valid).
CTR raid7CacheTimeouts	1.3.6.1.4.1.1386.2.2.1.4	Counter	read-only	The number of times that an error has been returned for an SNMP operation because the raid7CacheLifetime has been exceeded for some object.
CTR raid7BadValues	1.3.6.1.4.1.1386.2.2.1.5	Counter	read-only	This counts the number of times that the agent has discarded a data value from the RAID7 because it was out of range. This may indicate a version incompatibility between the agent and the array, or a serial link problem.
raid7Link	1.3.6.1.4.1.1386.2.2.2
STR raid7LinkName	1.3.6.1.4.1.1386.2.2.2.1	DisplayString	read-only	The device name on the proxy agent platform for the link between the proxy agent and the RAID7.
INT raid7LinkStatus	1.3.6.1.4.1.1386.2.2.2.2	INTEGER	read-only	This object indicates the status of the serial link to the RAID7: operational indicates that the device is open and frames are being received from the RAID7. openfailed indicates that there is a problem local to the agent that is preventing the agent process from opening; see the log file on the agent system. quiet indicates that the port was opened, but no data is being received from the RAID7.
GAU raid7LinkInactivityTime	1.3.6.1.4.1.1386.2.2.2.3	Gauge	read-only	The number of seconds allowed between characters received from the RAID7 before the raid7LinkStatus is changed to quiet.
CTR raid7LinkRcvBytes	1.3.6.1.4.1.1386.2.2.2.4	Counter	read-only	Number of bytes received from the RAID7; this includes those bytes later discarded due to errors, and counts both bytes of an escaped value sequence.
CTR raid7LinkXmtBytes	1.3.6.1.4.1.1386.2.2.2.5	Counter	read-only	Number of bytes sent to the RAID7; this counts both bytes of an escaped value sequence.
CTR raid7LinkRcvFrames	1.3.6.1.4.1.1386.2.2.2.6	Counter	read-only	Number of frames recognized from the RAID7; this includes those frames later discarded due to errors counted below.
CTR raid7LinkXmtFrames	1.3.6.1.4.1.1386.2.2.2.7	Counter	read-only	Number of framees sent to the RAID7.
CTR raid7LinkFramingErrors	1.3.6.1.4.1.1386.2.2.2.8	Counter	read-only	This counts frames from the RAID7 discarded by the agent because the length received did not match the message length field in the header.
CTR raid7LinkChecksumErrors	1.3.6.1.4.1.1386.2.2.2.9	Counter	read-only	This counts frames from the RAID7 discarded by the agent because the checksum was not correct.
CTR raid7LinkBadVersions	1.3.6.1.4.1.1386.2.2.2.10	Counter	read-only	This counts frames from the RAID7 discarded by the agent because the protocol version number in the header was not a version supported by the proxy software.
CTR raid7LinkBadIds	1.3.6.1.4.1.1386.2.2.2.11	Counter	read-only	This counts frames from the RAID7 discarded by the agent because the type/class/group header field was not a value supported by the proxy software.
CTR raid7LinkBadInstances	1.3.6.1.4.1.1386.2.2.2.12	Counter	read-only	This counts frames from the RAID7 discarded by the agent because the instance header field was out of range.

RFC description

SNMP proxy agent management for Storage Computer Corporation RAID7 systems, including proxy status and RAID7 communication metrics.

Start monitoring SCC RAID7 storage array accessed via SNMP proxy agent (interconnect link status/traffic counters) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SCCRAID7-PROXY-MIB

What Is SCCRAID7-PROXY-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description