All MIBs › SALIX-DS1-MIB › salixDsx1ContinuityTestType
salixDsx1ContinuityTestType
Module: SALIX-DS1-MIB
OID (symbolic): SALIX-DS1-MIB::salixDsx1ContinuityTestType
OID (numeric): 1.3.6.1.4.1.2158.2.7.1.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The type of continuity test that should be setup. An entry exists for every DS1 in the system. This object is consulted when IPDC is requested to setup a continuity test. Since this value is specified in SGCP, it is not consulted if the SGCP protocol is used. Writing to this value has the effect that it changes the continuity test type for any subsequently setup continuity tests. Any tests currently in progress are not effected by changing this object.
What is salixDsx1ContinuityTestType?
This read-write value sets which continuity test type, loopback(1) or transponder(2), is used when IPDC requests a continuity test on a given DS1, though it is ignored when SGCP signaling is in use since SGCP specifies its own test type. Admins change it to control future continuity tests on that DS1; any test already in progress is unaffected by the change. For example, setting salixDsx1ContinuityTestType to transponder(2) makes the next IPDC-requested continuity test on that DS1 use the transponder method instead of loopback.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2158.2.7.1.1.1.1 snmpwalk -v2c -c public <target> SALIX-DS1-MIB::salixDsx1ContinuityTestType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2158.2.7.1.1.1.1.1 snmpget -v2c -c public <target> SALIX-DS1-MIB::salixDsx1ContinuityTestType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2158.2.7.1.1.1.1.1 i <value>
Start monitoring SALIX Technologies media-gateway products (DS1 signaling/echo-cancellation configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SALIX-DS1-MIB::salixDsx1ContinuityTestType OID value, configure state conditions and alerts, and monitor any SALIX Technologies media-gateway products (DS1 signaling/echo-cancellation configuration) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2158 | salixTechnologies | SALIX-MIB |
| 1.3.6.1.4.1.2158.2 | salixGeneric | SALIX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2158.2.7 | salixDsx1MIB | SALIX-DS1-MIB |
| 1.3.6.1.4.1.2158.2.7.1 | salixDsx1MIBObjects | SALIX-DS1-MIB |
| 1.3.6.1.4.1.2158.2.7.1.1 | salixDsx1ConfigTable | SALIX-DS1-MIB |
| 1.3.6.1.4.1.2158.2.7.1.1.1 | salixDsx1ConfigEntry | SALIX-DS1-MIB |
| 1.3.6.1.4.1.2158.2.7.1.1.1.1 | salixDsx1ContinuityTestType | SALIX-DS1-MIB |