SALIX-PRODUCT-PLUGIN-MIB

All MIBs › SALIX-PRODUCT-PLUGIN-MIB

Organization: SALIX Technologies

Last Updated: 1998-10-13

Category: SALIX Technologies Media Gateway, VoIP and Media Gateway

Description: Manages SALIX Technologies product plug-in module inventory and operational status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SALIX-PRODUCT-PLUGIN-MIB?

SALIX-PRODUCT-PLUGIN-MIB is a vendor-specific SALIX Technologies MIB that extends the ATM Forum's M4 interface MIB (ATM-FORUM-M4-MIB) with hardware-specific management objects for pluggable modules ('plug-in units') in SALIX's HNE (Hybrid Network Element) chassis platform. It defines per-plug-in-type tables indexed by entPhysicalIndex, paralleling the ATM Forum plug-in unit table: a Data Processor Unit table (processor type), a Line Interface Unit table (orderwire enable/SONET line/layer selection), a Sync module table (primary/secondary slot identification), a Transcoder table (DSP health via percent-working-DSP and server type), and a DS3 LIU table (group membership). Monitoring it is primarily about hardware inventory and health for SALIX's modular chassis, particularly the Transcoder's percent-working-DSP object, which surfaces partial hardware failure that a simple up/down status wouldn't capture. It depends on the SALIX-MIB for its platform root and on ATM-FORUM-M4-MIB for the underlying plug-in unit indexing, and the SALIX-PRODUCT-PLUGIN-MIB MIB is the reference administrators load into their MIB browser to decode plug-in unit OIDs from SALIX HNE inventory polls.

IPNetwork Monitor allows you to monitor SNMP objects defined in SALIX-PRODUCT-PLUGIN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

SALIX Technologies HNE (Hybrid Network Element) chassis plug-in modules (DPU, LIU, Sync, Transcoder, DS3 LIU cards)

Monitoring Examples

An operator polls the Transcoder plug-in table for its percent-working-DSP value on a given card; a value below 100% while the card otherwise reports as installed would indicate partial DSP failure, meaning some VoIP transcoding/announcement capacity has been silently lost even though the card itself hasn't failed outright.

What Can Be Monitored

Data Processor Unit processor type/identification
Line Interface Unit orderwire configuration
sync module primary/secondary slot assignment
Transcoder percent-working-DSP health
Transcoder server type (VoIP/announcement/universal)
DS3 LIU group membership

Imported Objects

From ATM-FORUM-M4-MIB

atmfM4CellProtoHistIndex	OBJECT-TYPE
atmfM4PlugInUnitEntry	OBJECT-TYPE

From ENTITY-MIB

PhysicalIndex
entPhysicalIndex	OBJECT-TYPE

From SALIX-MIB

platform1

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
salixProductPlugInMIB	1.3.6.1.4.1.2158.5.1.5			The MIB describing SALIX specific extensions to the M4-MIB
salixProductPlugInMIBObjects	1.3.6.1.4.1.2158.5.1.5.1
salixPlugInUnit	1.3.6.1.4.1.2158.5.1.5.1.1
salixPlugInUnitDpuTable	1.3.6.1.4.1.2158.5.1.5.1.1.1		not-accessible	The HNE Data Processor Unit (DPU) plug-in unit table.
salixPlugInUnitDpuEntry	1.3.6.1.4.1.2158.5.1.5.1.1.1.1		not-accessible	An entry in the HNE DPU plug-in unit table. An entry contains HNE specific plug-in information for a Data Processor Unit. This table parallels the salixAtmfM4PlugInUnitTable. However, only valid LIU indices of the salixAtmfM4PlugInUnitTable will contain information pertinent to a DPU.
INT salixDpuProcessorType	1.3.6.1.4.1.2158.5.1.5.1.1.1.1.1	INTEGER	read-only	The type of processor installed on the Data Processor Unit. mipsR4700(1) - MIPS R4700 RISC processor.
salixPlugInUnitLiuTable	1.3.6.1.4.1.2158.5.1.5.1.1.2		not-accessible	The HNE Line Interface Unit (LIU) plug-in unit table.
salixPlugInUnitLiuEntry	1.3.6.1.4.1.2158.5.1.5.1.1.2.1		not-accessible	An entry in the HNE LIU plug-in unit table. An entry contains HNE specific plug-in information for an LIU. This table is indexed the same as the salixAtmfM4PlugInUnitTable. However, only valid LIU indices of the salixAtmfM4PlugInUnitTable will contain information pertinent to an LIU.
T/F salixLiuOrderwireEnabled	1.3.6.1.4.1.2158.5.1.5.1.1.2.1.1	TruthValue	read-write	Indication of whether the orderwire is enabled. true(1) - the orderwire is enabled false(2) - the orderwire is not-enabled
INT salixLiuOrderwireSonetLine	1.3.6.1.4.1.2158.5.1.5.1.1.2.1.2	INTEGER	read-write	Identifies which of the SONET lines on the plug-in unit to take the orderwire from for drop to the handset.
INT salixLiuOrderwireSonetLayer	1.3.6.1.4.1.2158.5.1.5.1.1.2.1.3	INTEGER	read-write	Identifies which of the two orderwire signals in the selected SONET line should be routed to the handset on the plug-in unit.
salixPlugInUnitSyncTable	1.3.6.1.4.1.2158.5.1.5.1.1.3		not-accessible	The HNE Sync module plug-in unit table.
salixPlugInUnitSyncEntry	1.3.6.1.4.1.2158.5.1.5.1.1.3.1		not-accessible	An entry in the HNE Sync module plug-in unit table. An entry contains HNE specific plug-in information for a Sync module. This table is indexed the same as the salixAtmfM4PlugInUnitTable. However, only valid Sync module indices of the salixAtmfM4PlugInUnitTable will contain information pertinent to a Sync module.
INT salixSyncSlotIdentifier	1.3.6.1.4.1.2158.5.1.5.1.1.3.1.1	INTEGER	read-only	Indicates whether the Sync module is installed in the primary or secondary plug-in unit slot.
salixPlugInUnitXcdrTable	1.3.6.1.4.1.2158.5.1.5.1.1.6		not-accessible	The Transcoder (xcoder) plug-in unit table.
salixPlugInUnitXcdrEntry	1.3.6.1.4.1.2158.5.1.5.1.1.6.1		not-accessible	An entry in the XCDR table. On entry exists for each Transcoder in the system. Each entry contains information and configuration about the Transcoder
INT salixPlugInUnitXcdrPercentWorkingDsp	1.3.6.1.4.1.2158.5.1.5.1.1.6.1.1	INTEGER	read-only	Represents the percentage of the Dsp's on the Transcoder that are currently working. The exact Dsp's that have failed can be found in the itxDspConfigTable from the SALIX-ITX-MIB
INT salixPlugInUnitXcdrType	1.3.6.1.4.1.2158.5.1.5.1.1.6.1.2	INTEGER	read-write	This object describes the Type of Transcoder described by the entry. voipServer(1) - A Transcoder that is limited to VOIP calls toneAndAnnouncementServer(2) - A Transcoder that is limited to announcements and tones universalServer(3) - A Transcoder that can do both Annoucements and VOIP calls
salixPlugInUnitDs3LiuTable	1.3.6.1.4.1.2158.5.1.5.1.1.7		not-accessible	The DS3 Line Interface Unit (DS3LIU) plug-in unit table.
salixPlugInUnitDs3LiuEntry	1.3.6.1.4.1.2158.5.1.5.1.1.7.1		not-accessible	An entry in the SALIX Ds3Liu Plugin Unit Table. One entry exists for each DS3LIU in the system, and contains information specific to DS3LIUs.
INT salixDs3LiuGroupNumber	1.3.6.1.4.1.2158.5.1.5.1.1.7.1.1	INTEGER	read-write	The group that the DS3LIU corresponding to this entry belongs to. Valid groups are numbered from 1 to 4. A value of 0 indicates that the DS3LIU does not belong in a group.
salixProductPlugInMIBTraps	1.3.6.1.4.1.2158.5.1.5.2
salixProductPlugInMIBTrapPrefix	1.3.6.1.4.1.2158.5.1.5.2.0
salixProductPlugInMIBCompliance	1.3.6.1.4.1.2158.5.1.5.3
salixPPIGroup	1.3.6.1.4.1.2158.5.1.5.3.1			Salix M4 Plug-In Objects Group
salixPPIGroups	1.3.6.1.4.1.2158.5.1.5.3.1
salixPPICompliance	1.3.6.1.4.1.2158.5.1.5.3.2			The basic implementation requirements for the SALIX-M4-MIB.
salixPPICompliances	1.3.6.1.4.1.2158.5.1.5.3.2

RFC description

SALIX HNE plug-in unit monitoring for processors, line interfaces, and modules.

Start monitoring SALIX Technologies HNE chassis plug-in modules (DPU, LIU, Sync, Transcoder, DS3 LIU cards) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SALIX-PRODUCT-PLUGIN-MIB

What Is SALIX-PRODUCT-PLUGIN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description