RSERPOOL-MIB

All MIBs › RSERPOOL-MIB

Organization: IEM-TdR, UNIVERSITY OF DUISBURG-ESSEN

Last Updated: 2009-04-07

Category: Web and Application Servers

Description: Defines managed objects for Reliable Server Pooling (RSerPool), monitoring ENRP servers, pool elements, and pool users.

IPNetwork Monitor uses several OIDs from this MIB in network discovery and polling the applicable devices. Start monitoring RSERPOOL-MIB with a free 30-day trial of IPNetwork Monitor.

What Is RSERPOOL-MIB?

RSERPOOL-MIB is an IETF standards-track MIB module for managing implementations of Reliable Server Pooling (RSerPool), a protocol framework for grouping redundant servers into pools for high-availability, load-distributed services. It exposes data about ENRP (Endpoint Handlespace Redundancy Protocol) name servers, pool elements, and pool users, including server identity, operational scope, and reachability information. This makes it useful for monitoring the software/service-level health of an RSerPool deployment, notably tracking rserpoolENRPUptime for individual ENRP servers, plus their announce ports and addresses, to detect a name server that has restarted or become unreachable. Because it manages a specific IETF transport-layer redundancy protocol, it is closely tied to the ENRP/ASAP protocol specifications and SCTP-based transport, rather than to any single vendor's hardware. It is typically deployed in telecom/carrier-grade signaling infrastructure (e.g., SCTP-based server pools for VoIP/SS7-over-IP applications) where high availability of pooled servers must be tracked, per the RSERPOOL-MIB RFC that defines this module.

IPNetwork Monitor allows you to monitor SNMP objects defined in RSERPOOL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

vendor-neutral, standards-based IETF MIB, not tied to a specific manufacturer
RSerPool/ENRP server or pool-element hosts (typically Unix/Linux telecom signaling servers)

Monitoring Examples

A network manager would walk rserpoolENRPTable/rserpoolENRPEntry to enumerate active ENRP servers by rserpoolENRPIndex, checking rserpoolENRPUptime to confirm each server has been continuously available and rserpoolENRPIdentifier/rserpoolENRPDescription to identify which instance is being examined. Polling rserpoolENRPASAPAnnouncePort, rserpoolENRPASAPAnnounceAddrType and rserpoolENRPASAPAnnounceAddr alongside rserpoolENRPENRPAnnouncePort would reveal whether a server's announcement endpoints are correctly configured; a server whose uptime resets unexpectedly signals a crash or restart of the redundancy service.

What Can Be Monitored

ENRP server uptime
ENRP server identifier and description
ENRP operation scope
ASAP/ENRP announce port and address
pool element and pool user registrations

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressType
InetPortNumber

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32
experimental

From SNMPv2-TC

TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using rserpoolENRPUptime OID:

Select a device implementing RSERPOOL-MIB as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rserpoolENRPUptime into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The ENRP service uptime of this ENRP server. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a TimeTicks-type OID, Value bounds is the most useful condition here — trigger an alert if the value is unexpectedly low (e.g. under 10 minutes), since that indicates a recent, possibly unplanned, reboot or restart. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
rserpoolENRPASAPAddrTable	1.3.6.1.3.125.1.1.5		not-accessible	A table listing of all IP addresses of the ASAP transport endpoint.
rserpoolENRPASAPAddrTableEntry	1.3.6.1.3.125.1.1.5.1		not-accessible	An IP address of the ASAP transport endpoint.
U32 rserpoolENRPASAPAddrTableIndex	1.3.6.1.3.125.1.1.5.1.1	Unsigned32	not-accessible	A unique identifier for the IP address of an ASAP transport endpoint.
IP rserpoolENRPASAPAnnounceAddr	1.3.6.1.3.125.1.1.1.1.9	InetAddress	read-only	The destination IP multicast address to which ASAP multicast announce messages are sent. The type of this address is given in rserpoolENRPASAPAnnounceAddrType.
IPt rserpoolENRPASAPAnnounceAddrType	1.3.6.1.3.125.1.1.1.1.8	InetAddressType	read-only	The network-layer protocol over which ASAP multicast announce messages are sent.
INE rserpoolENRPASAPAnnouncePort	1.3.6.1.3.125.1.1.1.1.7	InetPortNumber	read-only	The destination UDP port number to which ASAP multicast announce messages are sent.
IP rserpoolENRPASAPL3Addr	1.3.6.1.3.125.1.1.5.1.3	InetAddress	read-only	The IP address of an ASAP transport endpoint. The type of this address is given in rserpoolENRPASAPL3Type.
IPt rserpoolENRPASAPL3Type	1.3.6.1.3.125.1.1.5.1.2	InetAddressType	read-only	The network-layer protocol (IPv4 or IPv6) of an IP address of an ASAP transport endpoint.
INE rserpoolENRPASAPTransportPort	1.3.6.1.3.125.1.1.4.1.3	InetPortNumber	read-only	The SCTP port number of the ASAP endpoint of this pool element.
OCT rserpoolENRPDescription	1.3.6.1.3.125.1.1.1.1.4	OCTET STRING	read-write	A textual description of this ENRP server, e.g., its location and a contact address of its administrator. This object SHOULD be maintained in a persistent manner.
rserpoolENRPENRPAddrTable	1.3.6.1.3.125.1.1.7		not-accessible	A table listing of all IP addresses of the ENRP transport endpoint.
rserpoolENRPENRPAddrTableEntry	1.3.6.1.3.125.1.1.7.1		not-accessible	An IP address of the ENRP transport endpoint.
U32 rserpoolENRPENRPAddrTableIndex	1.3.6.1.3.125.1.1.7.1.1	Unsigned32	not-accessible	A unique identifier for the IP address of an ENRP transport endpoint.
IP rserpoolENRPENRPAnnounceAddr	1.3.6.1.3.125.1.1.1.1.12	InetAddress	read-only	The destination multicast IP address to which ENRP multicast announce messages are sent. The type of this address is given in rserpoolENRPENRPAnnounceAddrType.
IPt rserpoolENRPENRPAnnounceAddrType	1.3.6.1.3.125.1.1.1.1.11	InetAddressType	read-only	The network-layer protocol over which ENRP multicast announce messages are sent.
INE rserpoolENRPENRPAnnouncePort	1.3.6.1.3.125.1.1.1.1.10	InetPortNumber	read-only	The destination UDP port number to which ENRP multicast announce messages are sent.
IP rserpoolENRPENRPL3Addr	1.3.6.1.3.125.1.1.7.1.3	InetAddress	read-only	The IP address of an ENRP transport endpoint. The type of this address is given in rserpoolENRPENRPL3Type.
IPt rserpoolENRPENRPL3Type	1.3.6.1.3.125.1.1.7.1.2	InetAddressType	read-only	The network-layer protocol (IPv4 or IPv6) of an IP address of an ENRP transport endpoint.
rserpoolENRPEntry	1.3.6.1.3.125.1.1.1.1		not-accessible	An ENRP server entry in the table listing of ENRP servers.
rserpoolENRPGroup	1.3.6.1.3.125.2.2.1			The group contains all ENRP server instances running on the system
OID rserpoolENRPHomeENRPServer	1.3.6.1.3.125.1.1.4.1.13	RSerPoolENRPServerIdentifierTC	read-only	The ID of the Home ENRP server of this pool element.
OID rserpoolENRPIdentifier	1.3.6.1.3.125.1.1.1.1.3	RSerPoolENRPServerIdentifierTC	read-only	The ENRP server identifier of this ENRP server.
U32 rserpoolENRPIndex	1.3.6.1.3.125.1.1.1.1.1	Unsigned32	not-accessible	An integer to uniquely identify an ENRP server.
RSE rserpoolENRPOperationScope	1.3.6.1.3.125.1.1.1.1.2	RSerPoolOperationScopeTC	read-only	The definition of the operation scope of this ENRP server.
rserpoolENRPPeerAddrTable	1.3.6.1.3.125.1.1.9		not-accessible	A table listing of the peer endpoint addresses.
rserpoolENRPPeerAddrTableEntry	1.3.6.1.3.125.1.1.9.1		not-accessible	A table listing of all IP addresses of the ENRP transport endpoint of a peer referenced by rserpoolENRPPeerIndex.
U32 rserpoolENRPPeerAddrTableIndex	1.3.6.1.3.125.1.1.9.1.1	Unsigned32	not-accessible	A unique identifier for the IP address of a peer ENRP transport endpoint.
rserpoolENRPPeerEntry	1.3.6.1.3.125.1.1.8.1		not-accessible	A peer entry in the table listing of a peer table.
OID rserpoolENRPPeerIdentifier	1.3.6.1.3.125.1.1.8.1.2	RSerPoolENRPServerIdentifierTC	read-only	The ENRP identifier of this peer.
U32 rserpoolENRPPeerIndex	1.3.6.1.3.125.1.1.8.1.1	Unsigned32	not-accessible	A unique identifier for a peer entry in the table listing of a peer table.
IP rserpoolENRPPeerL3Addr	1.3.6.1.3.125.1.1.9.1.3	InetAddress	read-only	The IP address of a peer ENRP transport endpoint. The type of this address is given in rserpoolENRPPeerL3Type.
IPt rserpoolENRPPeerL3Type	1.3.6.1.3.125.1.1.9.1.2	InetAddressType	read-only	The network-layer protocol (IPv4 or IPv6) of an IP address of a peer ENRP transport endpoint.
TIK rserpoolENRPPeerLastHeard	1.3.6.1.3.125.1.1.8.1.4	TimeTicks	read-only	The time since the reception of the last ENRP Presence message of this peer.
INE rserpoolENRPPeerPort	1.3.6.1.3.125.1.1.8.1.3	InetPortNumber	read-only	The SCTP port number of the ENRP transport endpoint of this peer.
rserpoolENRPPeerTable	1.3.6.1.3.125.1.1.8		not-accessible	The table listing of a peer table.
OCT rserpoolENRPPolicyDescription	1.3.6.1.3.125.1.1.4.1.8	OCTET STRING	read-only	The textual description of the pool policy of this pool element.
OID rserpoolENRPPolicyID	1.3.6.1.3.125.1.1.4.1.7	RSerPoolPolicyIdentifierTC	read-only	The pool policy of this pool element.
RSE rserpoolENRPPolicyLoad	1.3.6.1.3.125.1.1.4.1.10	RSerPoolPolicyLoadTC	read-only	The pool policy's load status for this pool element.
RSE rserpoolENRPPolicyLoadDeg	1.3.6.1.3.125.1.1.4.1.11	RSerPoolPolicyLoadTC	read-only	The pool policy's load degradation parameter for this pool element.
RSE rserpoolENRPPolicyWeight	1.3.6.1.3.125.1.1.4.1.9	RSerPoolPolicyWeightTC	read-only	The pool policy's weight parameter for this pool element.
rserpoolENRPPoolElementEntry	1.3.6.1.3.125.1.1.4.1		not-accessible	A pool element in the table listing of pool elements.
OID rserpoolENRPPoolElementID	1.3.6.1.3.125.1.1.4.1.2	RserpoolPoolElementIdentifierTC	read-only	The pool element identifier of this pool element.
U32 rserpoolENRPPoolElementIndex	1.3.6.1.3.125.1.1.4.1.1	Unsigned32	not-accessible	An integer to uniquely identify a pool element. Note, that uniqueness of a pool element identifier in the pool is not enforced; therefore, this index is required here!
rserpoolENRPPoolElementTable	1.3.6.1.3.125.1.1.4		not-accessible	The table listing of pool elements.
rserpoolENRPPoolEntry	1.3.6.1.3.125.1.1.3.1		not-accessible	The pool entry in the table listing of pools.
RSE rserpoolENRPPoolHandle	1.3.6.1.3.125.1.1.3.1.2	RSerPoolPoolHandleTC	read-only	The pool handle of this pool.
U32 rserpoolENRPPoolIndex	1.3.6.1.3.125.1.1.3.1.1	Unsigned32	not-accessible	An integer to uniquely identify a pool.
rserpoolENRPPoolTable	1.3.6.1.3.125.1.1.3		not-accessible	The table listing of pools.
INE rserpoolENRPPort	1.3.6.1.3.125.1.1.1.1.6	InetPortNumber	read-only	The Stream Control Transmission Protocol (SCTP) port number of the ENRP protocol endpoint of this ENRP server.
TIK rserpoolENRPRegistrationLife	1.3.6.1.3.125.1.1.4.1.12	TimeTicks	read-only	The registration life of this pool element.
rserpoolENRPServers	1.3.6.1.3.125.1.1
rserpoolENRPTable	1.3.6.1.3.125.1.1.1		not-accessible	The table listing of ENRP servers.
TIK rserpoolENRPUptimeEx	1.3.6.1.3.125.1.1.1.1.5	TimeTicks	read-only	The ENRP service uptime of this ENRP server.
rserpoolENRPUserAddrTable	1.3.6.1.3.125.1.1.6		not-accessible	A table listing of all IP addresses of the user transport endpoint.
rserpoolENRPUserAddrTableEntry	1.3.6.1.3.125.1.1.6.1		not-accessible	An IP address of the user transport endpoint.
U32 rserpoolENRPUserAddrTableIndex	1.3.6.1.3.125.1.1.6.1.1	Unsigned32	not-accessible	A unique identifier for the IP address of a user transport endpoint.
IP rserpoolENRPUserL3Addr	1.3.6.1.3.125.1.1.6.1.3	InetAddress	read-only	The IP address of a user transport endpoint. The type of this address is given in rserpoolENRPUserL3Type.
ADR rserpoolENRPUserL3Opaque	1.3.6.1.3.125.1.1.6.1.4	RSerPoolOpaqueAddressTC	read-only	The opaque address of a user transport endpoint.
IPt rserpoolENRPUserL3Type	1.3.6.1.3.125.1.1.6.1.2	InetAddressType	read-only	The network-layer protocol (IPv4 or IPv6) of an IP address of a user transport endpoint. Set to unknown for an opaque address.
INE rserpoolENRPUserTransportPort	1.3.6.1.3.125.1.1.4.1.5	InetPortNumber	read-only	The transport protocol's port number of the service endpoint of this pool element.
U32 rserpoolENRPUserTransportProto	1.3.6.1.3.125.1.1.4.1.4	Unsigned32	read-only	The transport protocol number of the service endpoint of this pool element.
RSE rserpoolENRPUserTransportUse	1.3.6.1.3.125.1.1.4.1.6	RSerPoolTransportUseTypeTC	read-only	The transport use of the service endpoint of this pool element.
rserpoolMIB	1.3.6.1.3.125			The MIB module for managing an RSerPool implementation. Copyright (c) 2009 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - Neither the name of Internet Society, IETF or IETF Trust, nor the names of specific contributors, may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This version of this MIB module is part of RFC 5525; see the RFC itself for full legal notices.
rserpoolMIBCompliance	1.3.6.1.3.125.2.1.1			The compliance statement for SNMP entities that implement RSerPool.
rserpoolMIBCompliances	1.3.6.1.3.125.2.1
rserpoolMIBConformance	1.3.6.1.3.125.2
rserpoolMIBGroups	1.3.6.1.3.125.2.2
rserpoolMIBObjects	1.3.6.1.3.125.1
rserpoolPEASAPAddrTable	1.3.6.1.3.125.1.2.2		not-accessible	A table listing of all IP addresses of the ASAP transport endpoint.
rserpoolPEASAPAddrTableEntry	1.3.6.1.3.125.1.2.2.1		not-accessible	An IP address of the ASAP transport endpoint.
U32 rserpoolPEASAPAddrTableIndex	1.3.6.1.3.125.1.2.2.1.1	Unsigned32	not-accessible	A unique identifier for the IP address of an ASAP transport endpoint.
IP rserpoolPEASAPL3Addr	1.3.6.1.3.125.1.2.2.1.3	InetAddress	read-only	The IP address of an ASAP transport endpoint. The type of this address is given in rserpoolPEASAPL3Type.
IPt rserpoolPEASAPL3Type	1.3.6.1.3.125.1.2.2.1.2	InetAddressType	read-only	The network-layer protocol (IPv4 or IPv6) of an IP address of an ASAP transport endpoint.
INE rserpoolPEASAPTransportPort	1.3.6.1.3.125.1.2.1.1.7	InetPortNumber	read-only	The SCTP port number of the ASAP endpoint of this pool element.
OCT rserpoolPEDescription	1.3.6.1.3.125.1.2.1.1.5	OCTET STRING	read-write	A textual description of this pool element, e.g., its location and a contact address of its administrator. This object SHOULD be maintained in a persistent manner.
rserpoolPEEntry	1.3.6.1.3.125.1.2.1.1		not-accessible	A pool element in the table listing of pool elements.
rserpoolPEGroup	1.3.6.1.3.125.2.2.2			The group contains all pool element instances running on the system
OID rserpoolPEHomeENRPServer	1.3.6.1.3.125.1.2.1.1.17	RSerPoolENRPServerIdentifierTC	read-only	The ID of the Home ENRP server of this pool element.
OID rserpoolPEIdentifier	1.3.6.1.3.125.1.2.1.1.4	RserpoolPoolElementIdentifierTC	read-only	The pool element identifier of this pool element.
U32 rserpoolPEIndex	1.3.6.1.3.125.1.2.1.1.1	Unsigned32	not-accessible	An integer to uniquely identify a pool element. Note, that uniqueness of a pool element identifier in the pool is not enforced; therefore, this index is required here!
RSE rserpoolPEOperationScope	1.3.6.1.3.125.1.2.1.1.2	RSerPoolOperationScopeTC	read-only	The operation scope of this pool element.
OCT rserpoolPEPolicyDescription	1.3.6.1.3.125.1.2.1.1.12	OCTET STRING	read-write	The textual description of the pool policy of this pool element. This object SHOULD be maintained in a persistent manner.
OID rserpoolPEPolicyID	1.3.6.1.3.125.1.2.1.1.11	RSerPoolPolicyIdentifierTC	read-write	The pool policy of this pool element. Changing this object will update the pool element's policy and result in a re-registration. This object SHOULD be maintained in a persistent manner.
RSE rserpoolPEPolicyLoad	1.3.6.1.3.125.1.2.1.1.14	RSerPoolPolicyLoadTC	read-only	The pool policy's load status for this pool element.
RSE rserpoolPEPolicyLoadDeg	1.3.6.1.3.125.1.2.1.1.15	RSerPoolPolicyLoadTC	read-write	The pool policy's load degradation parameter for this pool element. Changing this object will update the pool element's load degradation setting and result in a re-registration. This object SHOULD be maintained in a persistent manner.
RSE rserpoolPEPolicyWeight	1.3.6.1.3.125.1.2.1.1.13	RSerPoolPolicyWeightTC	read-write	The pool policy's weight parameter for this pool element. Changing this object will update the pool element's policy weight setting and result in a re-registration. This object SHOULD be maintained in a persistent manner.
RSE rserpoolPEPoolHandle	1.3.6.1.3.125.1.2.1.1.3	RSerPoolPoolHandleTC	read-write	The pool handle of this pool element. Changing this object will update the pool element's pool handle and result in a re-registration. This object SHOULD be maintained in a persistent manner.
TIK rserpoolPERegistrationLife	1.3.6.1.3.125.1.2.1.1.16	TimeTicks	read-write	The registration life of this pool element. Changing this object will update the pool element's lifetime setting and result in a re-registration. This object SHOULD be maintained in a persistent manner.
rserpoolPETable	1.3.6.1.3.125.1.2.1		not-accessible	The table listing of pool elements.
TIK rserpoolPEUptime	1.3.6.1.3.125.1.2.1.1.6	TimeTicks	read-only	The ENRP service uptime of this pool element.
rserpoolPEUserAddrTable	1.3.6.1.3.125.1.2.6		not-accessible	A table listing of all IP addresses of the user transport endpoint.
rserpoolPEUserAddrTableEntry	1.3.6.1.3.125.1.2.6.1		not-accessible	An IP address of the user transport endpoint.
U32 rserpoolPEUserAddrTableIndex	1.3.6.1.3.125.1.2.6.1.1	Unsigned32	not-accessible	A unique identifier for the IP address of a user transport endpoint.
IP rserpoolPEUserL3Addr	1.3.6.1.3.125.1.2.6.1.3	InetAddress	read-only	The IP address of a user transport endpoint. The type of this address is given in rserpoolPEUserL3Addr.
ADR rserpoolPEUserL3Opaque	1.3.6.1.3.125.1.2.6.1.4	RSerPoolOpaqueAddressTC	read-only	The opaque address of a user transport endpoint.
IPt rserpoolPEUserL3Type	1.3.6.1.3.125.1.2.6.1.2	InetAddressType	read-only	The network-layer protocol of an IP address of a user transport endpoint. Set to unknown for opaque address.
INE rserpoolPEUserTransportPort	1.3.6.1.3.125.1.2.1.1.9	InetPortNumber	read-only	The transport protocol's port number of the service endpoint of this pool element.
U32 rserpoolPEUserTransportProto	1.3.6.1.3.125.1.2.1.1.8	Unsigned32	read-only	The transport protocol number of the service endpoint of this pool element.
RSE rserpoolPEUserTransportUse	1.3.6.1.3.125.1.2.1.1.10	RSerPoolTransportUseTypeTC	read-only	The transport use of the service endpoint of this pool element.
rserpoolPoolElements	1.3.6.1.3.125.1.2
rserpoolPoolUsers	1.3.6.1.3.125.1.3
OCT rserpoolPUDescription	1.3.6.1.3.125.1.3.1.1.4	OCTET STRING	read-write	A textual description of this pool user, e.g., its location and a contact address of its administrator. This object SHOULD be maintained in a persistent manner.
rserpoolPUEntry	1.3.6.1.3.125.1.3.1.1		not-accessible	A pool user in the table listing of pool users.
rserpoolPUGroup	1.3.6.1.3.125.2.2.3			The group contains all pool user instances running on the system
U32 rserpoolPUIndex	1.3.6.1.3.125.1.3.1.1.1	Unsigned32	not-accessible	An integer to uniquely identify a pool user.
RSE rserpoolPUOperationScope	1.3.6.1.3.125.1.3.1.1.2	RSerPoolOperationScopeTC	read-only	The operation scope of this pool user.
RSE rserpoolPUPoolHandle	1.3.6.1.3.125.1.3.1.1.3	RSerPoolPoolHandleTC	read-write	The pool handle of this pool user. Changing this object will update the pool user's pool handle for all future sessions. This object SHOULD be maintained in a persistent manner.
rserpoolPUTable	1.3.6.1.3.125.1.3.1		not-accessible	The table listing of pool users.
TIK rserpoolPUUptime	1.3.6.1.3.125.1.3.1.1.5	TimeTicks	read-only	The ENRP service uptime of this pool user.

RFC description

Manages RSerPool (Reliable Server Pooling) protocol implementations and server pool resources.

Start monitoring vendor-neutral, standards-based IETF MIB, RSerPool/ENRP server or pool-element hosts with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RSERPOOL-MIB