All MIBs › RMS-COMPACT-SNMPv1-MAIN-MIB
Category: Environmental Monitoring
Description: Manages core device status, temperature, and system identity for the RMS Compact environmental monitor.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is RMS-COMPACT-SNMPv1-MAIN-MIB?
RMS-COMPACT-SNMPv1-MAIN-MIB is a Sinetica enterprise MIB for the "RMS Compact" environmental monitoring appliance, a small rack-mount unit that watches conditions such as temperature in equipment rooms and cabinets. It exposes per-sensor configuration (enable/disable, name, calibration offset) alongside live readings and multi-tier threshold levels (lower/upper warning and control levels) plus trap-arming flags for each threshold crossing. This is a hardware environmental-status MIB: administrators use it to track the current temperature reading against configured warning/critical thresholds and to know whether the device will fire a trap when a threshold is crossed, catching cooling failures or overheating before equipment damage occurs. It's a self-contained vendor MIB with no stated dependency on other standard sensor MIBs. It's typically deployed in server rooms, network closets, or cabinets alongside networking/server equipment as an independent environmental monitoring probe. Engineers can download the RMS-COMPACT-SNMPv1-MAIN-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in RMS-COMPACT-SNMPv1-MAIN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Sinetica RMS Compact environmental monitor
Monitoring Examples
An admin polls rms-cTemp1Current against rms-cTemp1UpperWarningLevel and rms-cTemp1UpperControlLevel to see how close a room or cabinet is to an overheating condition. rms-cTemp1EnableMonitoring confirms the sensor channel is actually active, and rms-cTemp1OFFtoONtrapUWL/rms-cTemp1OFFtoONtrapLCL indicate whether the device is configured to fire a trap the moment upper-warning or lower-control thresholds are crossed, giving early warning of an HVAC failure.
What Can Be Monitored
- current temperature reading
- temperature warning/control thresholds
- sensor monitoring enable state
- calibration offset
- trap-on-threshold-crossing configuration
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| enterprises |
From RFC1213-MIB
| DisplayString | |
| sysDescr | |
| sysName |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| sinetica | 1.3.6.1.4.1.3711 | |||
| rms_compact | 1.3.6.1.4.1.3711.15 | |||
| rms_compact1 | 1.3.6.1.4.1.3711.15.1 | |||
| rms_cObjects | 1.3.6.1.4.1.3711.15.1.1 | |||
| rms_cEnviroment | 1.3.6.1.4.1.3711.15.1.1.1 | |||
| rms_cTemp1 | 1.3.6.1.4.1.3711.15.1.1.1.1 | |||
| NTF rms_cTemp1LowControlLimitAlarm | 1.3.6.1.4.1.3711.15.1.1.1.1.0.101 | Temperature is below the low control limit. | ||
| NTF rms_cTemp1LowWarningLimitAlarm | 1.3.6.1.4.1.3711.15.1.1.1.1.0.102 | Temperature is below the low warning limit. | ||
| NTF rms_cTemp1HighWarningLimitAlarm | 1.3.6.1.4.1.3711.15.1.1.1.1.0.103 | Temperature is over the high warning limit. | ||
| NTF rms_cTemp1HighControlLimitAlarm | 1.3.6.1.4.1.3711.15.1.1.1.1.0.104 | Temperature is over the high control limit. | ||
| NTF rms_cTemp1LowControlLimitNormal | 1.3.6.1.4.1.3711.15.1.1.1.1.0.105 | Temperature is inside the low control limit. | ||
| NTF rms_cTemp1LowWarningLimitNormal | 1.3.6.1.4.1.3711.15.1.1.1.1.0.106 | Temperature is inside the low warning limit. | ||
| NTF rms_cTemp1HighWarningLimitNormal | 1.3.6.1.4.1.3711.15.1.1.1.1.0.107 | Temperature is inside the high warning limit. | ||
| NTF rms_cTemp1HighControlLimitNormal | 1.3.6.1.4.1.3711.15.1.1.1.1.0.108 | Temperature is inside the high control limit. | ||
| INT rms_cTemp1EnableMonitoring | 1.3.6.1.4.1.3711.15.1.1.1.1.1 | INTEGER | read-write | Setting to one enables monitoring of Temperature |
| STR rms_cTemp1Name | 1.3.6.1.4.1.3711.15.1.1.1.1.2 | DisplayString | read-write | The name of the temperature reading |
| INT rms_cTemp1CalibrationOffset | 1.3.6.1.4.1.3711.15.1.1.1.1.3 | INTEGER | read-write | Calibration offset in 0.1 degrees |
| INT rms_cTemp1Current | 1.3.6.1.4.1.3711.15.1.1.1.1.4 | INTEGER | read-only | The current temperature reading in 0.1% |
| rms_cTemp1Thresholds | 1.3.6.1.4.1.3711.15.1.1.1.1.5 | |||
| INT rms_cTemp1LowerControlLevel | 1.3.6.1.4.1.3711.15.1.1.1.1.5.1 | INTEGER | read-write | The Lower Limit temperature threshold in 0.1 degrees |
| INT rms_cTemp1LowerWarningLevel | 1.3.6.1.4.1.3711.15.1.1.1.1.5.2 | INTEGER | read-write | The Lower Control temperature threshold in 0.1 degrees |
| INT rms_cTemp1UpperWarningLevel | 1.3.6.1.4.1.3711.15.1.1.1.1.5.3 | INTEGER | read-write | The Upper Control temperature threshold in 0.1 degrees |
| INT rms_cTemp1UpperControlLevel | 1.3.6.1.4.1.3711.15.1.1.1.1.5.4 | INTEGER | read-write | The Upper Limit temperature threshold in 0.1 degrees |
| rms_cTemp1OFFtoONtraps | 1.3.6.1.4.1.3711.15.1.1.1.1.6 | |||
| INT rms_cTemp1OFFtoONtrapLCL | 1.3.6.1.4.1.3711.15.1.1.1.1.6.1 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cTemp1OFFtoONontrapLWL | 1.3.6.1.4.1.3711.15.1.1.1.1.6.2 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cTemp1OFFtoONtrapUWL | 1.3.6.1.4.1.3711.15.1.1.1.1.6.3 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cTemp1OFFtoONtrapUCL | 1.3.6.1.4.1.3711.15.1.1.1.1.6.4 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| rms_cTemp1OFFtoONrepeatTimers | 1.3.6.1.4.1.3711.15.1.1.1.1.7 | |||
| INT rms_cTemp1OFFtoONrepLCL | 1.3.6.1.4.1.3711.15.1.1.1.1.7.1 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in minutes |
| INT rms_cTemp1OFFtoONrepLWL | 1.3.6.1.4.1.3711.15.1.1.1.1.7.2 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in minutes |
| INT rms_cTemp1OFFtoONrepUWL | 1.3.6.1.4.1.3711.15.1.1.1.1.7.3 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in minutes |
| INT rms_cTemp1OFFtoONrepUCL | 1.3.6.1.4.1.3711.15.1.1.1.1.7.4 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in minutes |
| rms_cTemp1ONtoOFFtraps | 1.3.6.1.4.1.3711.15.1.1.1.1.8 | |||
| INT rms_cTemp1ONtoOFFtrapLCL | 1.3.6.1.4.1.3711.15.1.1.1.1.8.1 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cTemp1ONtoOFFtrapLWL | 1.3.6.1.4.1.3711.15.1.1.1.1.8.2 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cTemp1ONtoOFFtrapUWL | 1.3.6.1.4.1.3711.15.1.1.1.1.8.3 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cTemp1ONtoOFFtrapUCL | 1.3.6.1.4.1.3711.15.1.1.1.1.8.4 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| rms_cTemp1ONtoOFFrepeatTimers | 1.3.6.1.4.1.3711.15.1.1.1.1.9 | |||
| INT rms_cTemp1ONtoOFFrepLCL | 1.3.6.1.4.1.3711.15.1.1.1.1.9.1 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cTemp1ONtoOFFrepLWL | 1.3.6.1.4.1.3711.15.1.1.1.1.9.2 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cTemp1ONtoOFFrepUWL | 1.3.6.1.4.1.3711.15.1.1.1.1.9.3 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cTemp1ONtoOFFrepUCL | 1.3.6.1.4.1.3711.15.1.1.1.1.9.4 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| rms_cHumid1 | 1.3.6.1.4.1.3711.15.1.1.1.2 | |||
| INT rms_cHumid1EnableMonitoring | 1.3.6.1.4.1.3711.15.1.1.1.2.1 | INTEGER | read-write | Setting to one enables monitoring of Humidity |
| STR rms_cHumid1Name | 1.3.6.1.4.1.3711.15.1.1.1.2.2 | DisplayString | read-write | The name of the humidity reading |
| INT rms_cHumid1CalibrationOffset | 1.3.6.1.4.1.3711.15.1.1.1.2.3 | INTEGER | read-write | Calibration offset in 0.1 percent |
| INT rms_cHumid1Current | 1.3.6.1.4.1.3711.15.1.1.1.2.4 | INTEGER | read-only | The current humidity reading in 0.1% |
| rms_cHumid1Thresholds | 1.3.6.1.4.1.3711.15.1.1.1.2.5 | |||
| INT rms_cHumid1LowerControlLevel | 1.3.6.1.4.1.3711.15.1.1.1.2.5.1 | INTEGER | read-write | The Lower Limit Humidity threshold in 0.1 percent |
| INT rms_cHumid1LowerWarningLevel | 1.3.6.1.4.1.3711.15.1.1.1.2.5.2 | INTEGER | read-write | The Lower Control humidity threshold in 0.1 percent |
| INT rms_cHumid1UpperWarningLevel | 1.3.6.1.4.1.3711.15.1.1.1.2.5.3 | INTEGER | read-write | The Upper Control humidity threshold in 0.1 percent |
| INT rms_cHumid1UpperControlLevel | 1.3.6.1.4.1.3711.15.1.1.1.2.5.4 | INTEGER | read-write | The Upper Limit humidity threshold in 0.1 percent |
| rms_cHumid1OFFtoONtraps | 1.3.6.1.4.1.3711.15.1.1.1.2.6 | |||
| INT rms_cHumid1OFFtoONtrapLCL | 1.3.6.1.4.1.3711.15.1.1.1.2.6.1 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cHumid1OFFtoONtrapLWL | 1.3.6.1.4.1.3711.15.1.1.1.2.6.2 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cHumid1OFFtoONtrapUWL | 1.3.6.1.4.1.3711.15.1.1.1.2.6.3 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cHumid1OFFtoONtrapUCL | 1.3.6.1.4.1.3711.15.1.1.1.2.6.4 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| rms_cHumid1OFFtoONrepeatTimers | 1.3.6.1.4.1.3711.15.1.1.1.2.7 | |||
| INT rms_cHumid1OFFtoONrepLCL | 1.3.6.1.4.1.3711.15.1.1.1.2.7.1 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cHumid1OFFtoONrepLWL | 1.3.6.1.4.1.3711.15.1.1.1.2.7.2 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cHumid1OFFtoONrepUWL | 1.3.6.1.4.1.3711.15.1.1.1.2.7.3 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cHumid1OFFtoONrepUCL | 1.3.6.1.4.1.3711.15.1.1.1.2.7.4 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| rms_cHumid1ONtoOFFtraps | 1.3.6.1.4.1.3711.15.1.1.1.2.8 | |||
| INT rms_cHumid1ONtoOFFtrapLCL | 1.3.6.1.4.1.3711.15.1.1.1.2.8.1 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cHumid1ONtoOFFtrapLWL | 1.3.6.1.4.1.3711.15.1.1.1.2.8.2 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cHumid1ONtoOFFtrapUWL | 1.3.6.1.4.1.3711.15.1.1.1.2.8.3 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cHumid1ONtoOFFtrapUCL | 1.3.6.1.4.1.3711.15.1.1.1.2.8.4 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| rms_cHumid1ONtoOFFrepeatTimers | 1.3.6.1.4.1.3711.15.1.1.1.2.9 | |||
| INT rms_cHumid1ONtoOFFrepLCL | 1.3.6.1.4.1.3711.15.1.1.1.2.9.1 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cHumid1ONtoOFFrepLWL | 1.3.6.1.4.1.3711.15.1.1.1.2.9.2 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cHumid1ONtoOFFrepUWL | 1.3.6.1.4.1.3711.15.1.1.1.2.9.3 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cHumid1ONtoOFFrepUCL | 1.3.6.1.4.1.3711.15.1.1.1.2.9.4 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| rms_cTemp2 | 1.3.6.1.4.1.3711.15.1.1.1.3 | |||
| INT rms_cTemp2EnableMonitoring | 1.3.6.1.4.1.3711.15.1.1.1.3.1 | INTEGER | read-write | Setting to one enables monitoring of Temperature |
| STR rms_cTemp2Name | 1.3.6.1.4.1.3711.15.1.1.1.3.2 | DisplayString | read-write | The name of the temperature reading |
| INT rms_cTemp2CalibrationOffset | 1.3.6.1.4.1.3711.15.1.1.1.3.3 | INTEGER | read-write | Calibration offset in 0.1 degrees |
| INT rms_cTemp2Current | 1.3.6.1.4.1.3711.15.1.1.1.3.4 | INTEGER | read-only | The current temperature reading in 0.1% |
| rms_cTemp2Thresholds | 1.3.6.1.4.1.3711.15.1.1.1.3.5 | |||
| INT rms_cTemp2LowerControlLevel | 1.3.6.1.4.1.3711.15.1.1.1.3.5.1 | INTEGER | read-write | The Lower Limit temperature threshold in 0.1 degrees |
| INT rms_cTemp2LowerWarningLevel | 1.3.6.1.4.1.3711.15.1.1.1.3.5.2 | INTEGER | read-write | The Lower Control temperature threshold in 0.1 degrees |
| INT rms_cTemp2UpperWarningLevel | 1.3.6.1.4.1.3711.15.1.1.1.3.5.3 | INTEGER | read-write | The Upper Control temperature threshold in 0.1 degrees |
| INT rms_cTemp2UpperControlLevel | 1.3.6.1.4.1.3711.15.1.1.1.3.5.4 | INTEGER | read-write | The Upper Limit temperature threshold in 0.1 degrees |
| rms_cTemp2OFFtoONtraps | 1.3.6.1.4.1.3711.15.1.1.1.3.6 | |||
| INT rms_cTemp2OFFtoONtrapLCL | 1.3.6.1.4.1.3711.15.1.1.1.3.6.1 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cTemp2OFFtoONontrapLWL | 1.3.6.1.4.1.3711.15.1.1.1.3.6.2 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cTemp2OFFtoONtrapUWL | 1.3.6.1.4.1.3711.15.1.1.1.3.6.3 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cTemp2OFFtoONtrapUCL | 1.3.6.1.4.1.3711.15.1.1.1.3.6.4 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| rms_cTemp2OFFtoONrepeatTimers | 1.3.6.1.4.1.3711.15.1.1.1.3.7 | |||
| INT rms_cTemp2OFFtoONrepLCL | 1.3.6.1.4.1.3711.15.1.1.1.3.7.1 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cTemp2OFFtoONrepLWL | 1.3.6.1.4.1.3711.15.1.1.1.3.7.2 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cTemp2OFFtoONrepUWL | 1.3.6.1.4.1.3711.15.1.1.1.3.7.3 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cTemp2OFFtoONrepUCL | 1.3.6.1.4.1.3711.15.1.1.1.3.7.4 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| rms_cTemp2ONtoOFFtraps | 1.3.6.1.4.1.3711.15.1.1.1.3.8 | |||
| INT rms_cTemp2ONtoOFFtrapLCL | 1.3.6.1.4.1.3711.15.1.1.1.3.8.1 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cTemp2ONtoOFFtrapLWL | 1.3.6.1.4.1.3711.15.1.1.1.3.8.2 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cTemp2ONtoOFFtrapUWL | 1.3.6.1.4.1.3711.15.1.1.1.3.8.3 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cTemp2ONtoOFFtrapUCL | 1.3.6.1.4.1.3711.15.1.1.1.3.8.4 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| rms_cTemp2ONtoOFFrepeatTimers | 1.3.6.1.4.1.3711.15.1.1.1.3.9 | |||
| INT rms_cTemp2ONtoOFFrepLCL | 1.3.6.1.4.1.3711.15.1.1.1.3.9.1 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cTemp2ONtoOFFrepLWL | 1.3.6.1.4.1.3711.15.1.1.1.3.9.2 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cTemp2ONtoOFFrepUWL | 1.3.6.1.4.1.3711.15.1.1.1.3.9.3 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cTemp2ONtoOFFrepUCL | 1.3.6.1.4.1.3711.15.1.1.1.3.9.4 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| rms_cHumid2 | 1.3.6.1.4.1.3711.15.1.1.1.4 | |||
| INT rms_cHumid2EnableMonitoring | 1.3.6.1.4.1.3711.15.1.1.1.4.1 | INTEGER | read-write | Setting to one enables monitoring of Humidity |
| STR rms_cHumid2Name | 1.3.6.1.4.1.3711.15.1.1.1.4.2 | DisplayString | read-write | The name of the humidity reading |
| INT rms_cHumid2CalibrationOffset | 1.3.6.1.4.1.3711.15.1.1.1.4.3 | INTEGER | read-write | Calibration offset in 0.1 percent |
| INT rms_cHumid2Current | 1.3.6.1.4.1.3711.15.1.1.1.4.4 | INTEGER | read-only | The current humidity reading in 0.1% |
| rms_cHumid2Thresholds | 1.3.6.1.4.1.3711.15.1.1.1.4.5 | |||
| INT rms_cHumid2LowerControlLevel | 1.3.6.1.4.1.3711.15.1.1.1.4.5.1 | INTEGER | read-write | The Lower Limit Humidity threshold in 0.1 percent |
| INT rms_cHumid2LowerWarningLevel | 1.3.6.1.4.1.3711.15.1.1.1.4.5.2 | INTEGER | read-write | The Lower Control humidity threshold in 0.1 percent |
| INT rms_cHumid2UpperWarningLevel | 1.3.6.1.4.1.3711.15.1.1.1.4.5.3 | INTEGER | read-write | The Upper Control humidity threshold in 0.1 percent |
| INT rms_cHumid2UpperControlLevel | 1.3.6.1.4.1.3711.15.1.1.1.4.5.4 | INTEGER | read-write | The Upper Limit humidity threshold in 0.1 percent |
| rms_cHumid2OFFtoONtraps | 1.3.6.1.4.1.3711.15.1.1.1.4.6 | |||
| INT rms_cHumid2OFFtoONtrapLCL | 1.3.6.1.4.1.3711.15.1.1.1.4.6.1 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cHumid2OFFtoONtrapLWL | 1.3.6.1.4.1.3711.15.1.1.1.4.6.2 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cHumid2OFFtoONtrapUWL | 1.3.6.1.4.1.3711.15.1.1.1.4.6.3 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cHumid2OFFtoONtrapUCL | 1.3.6.1.4.1.3711.15.1.1.1.4.6.4 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| rms_cHumid2OFFtoONrepeatTimers | 1.3.6.1.4.1.3711.15.1.1.1.4.7 | |||
| INT rms_cHumid2OFFtoONrepLCL | 1.3.6.1.4.1.3711.15.1.1.1.4.7.1 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cHumid2OFFtoONrepLWL | 1.3.6.1.4.1.3711.15.1.1.1.4.7.2 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cHumid2OFFtoONrepUWL | 1.3.6.1.4.1.3711.15.1.1.1.4.7.3 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cHumid2OFFtoONrepUCL | 1.3.6.1.4.1.3711.15.1.1.1.4.7.4 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| rms_cHumid2ONtoOFFtraps | 1.3.6.1.4.1.3711.15.1.1.1.4.8 | |||
| INT rms_cHumid2ONtoOFFtrapLCL | 1.3.6.1.4.1.3711.15.1.1.1.4.8.1 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cHumid2ONtoOFFtrapLWL | 1.3.6.1.4.1.3711.15.1.1.1.4.8.2 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cHumid2ONtoOFFtrapUWL | 1.3.6.1.4.1.3711.15.1.1.1.4.8.3 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cHumid2ONtoOFFtrapUCL | 1.3.6.1.4.1.3711.15.1.1.1.4.8.4 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| rms_cHumid2ONtoOFFrepeatTimers | 1.3.6.1.4.1.3711.15.1.1.1.4.9 | |||
| INT rms_cHumid2ONtoOFFrepLCL | 1.3.6.1.4.1.3711.15.1.1.1.4.9.1 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cHumid2ONtoOFFrepLWL | 1.3.6.1.4.1.3711.15.1.1.1.4.9.2 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cHumid2ONtoOFFrepUWL | 1.3.6.1.4.1.3711.15.1.1.1.4.9.3 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cHumid2ONtoOFFrepUCL | 1.3.6.1.4.1.3711.15.1.1.1.4.9.4 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| rms_cContact | 1.3.6.1.4.1.3711.15.1.1.2 | |||
| rms_cContactNames | 1.3.6.1.4.1.3711.15.1.1.2.1 | |||
| STR rms_cContact1Name | 1.3.6.1.4.1.3711.15.1.1.2.1.1 | DisplayString | read-write | The name of the contact |
| STR rms_cContact2Name | 1.3.6.1.4.1.3711.15.1.1.2.1.2 | DisplayString | read-write | The name of the contact |
| STR rms_cContact3Name | 1.3.6.1.4.1.3711.15.1.1.2.1.3 | DisplayString | read-write | The name of the contact |
| STR rms_cContact4Name | 1.3.6.1.4.1.3711.15.1.1.2.1.4 | DisplayString | read-write | The name of the contact |
| STR rms_cContact5Name | 1.3.6.1.4.1.3711.15.1.1.2.1.5 | DisplayString | read-write | The name of the contact |
| STR rms_cContact6Name | 1.3.6.1.4.1.3711.15.1.1.2.1.6 | DisplayString | read-write | The name of the contact |
| STR rms_cContact7Name | 1.3.6.1.4.1.3711.15.1.1.2.1.7 | DisplayString | read-write | The name of the contact |
| STR rms_cContact8Name | 1.3.6.1.4.1.3711.15.1.1.2.1.8 | DisplayString | read-write | The name of the contact |
| rms_cContactType | 1.3.6.1.4.1.3711.15.1.1.2.2 | |||
| INT rms_cContact1Type | 1.3.6.1.4.1.3711.15.1.1.2.2.1 | INTEGER | read-write | Level or posedge or negedge input detection |
| INT rms_cContact2Type | 1.3.6.1.4.1.3711.15.1.1.2.2.2 | INTEGER | read-write | Level or posedge or negedge input detection |
| INT rms_cContact3Type | 1.3.6.1.4.1.3711.15.1.1.2.2.3 | INTEGER | read-write | Level or posedge or negedge input detection |
| INT rms_cContact4Type | 1.3.6.1.4.1.3711.15.1.1.2.2.4 | INTEGER | read-write | Level or posedge or negedge input detection |
| INT rms_cContact5Type | 1.3.6.1.4.1.3711.15.1.1.2.2.5 | INTEGER | read-write | Level or posedge or negedge input detection |
| INT rms_cContact6Type | 1.3.6.1.4.1.3711.15.1.1.2.2.6 | INTEGER | read-write | Level or posedge or negedge input detection |
| INT rms_cContact7Type | 1.3.6.1.4.1.3711.15.1.1.2.2.7 | INTEGER | read-write | Level or posedge or negedge input detection |
| INT rms_cContact8Type | 1.3.6.1.4.1.3711.15.1.1.2.2.8 | INTEGER | read-write | Level or posedge or negedge input detection |
| rms_cContactReset | 1.3.6.1.4.1.3711.15.1.1.2.3 | |||
| INT rms_cContact1Reset | 1.3.6.1.4.1.3711.15.1.1.2.3.1 | INTEGER | write-only | Resets edge triggered input |
| INT rms_cContact2Reset | 1.3.6.1.4.1.3711.15.1.1.2.3.2 | INTEGER | write-only | Resets edge triggered input |
| INT rms_cContact3Reset | 1.3.6.1.4.1.3711.15.1.1.2.3.3 | INTEGER | write-only | Resets edge triggered input |
| INT rms_cContact4Reset | 1.3.6.1.4.1.3711.15.1.1.2.3.4 | INTEGER | write-only | Resets edge triggered input |
| INT rms_cContact5Reset | 1.3.6.1.4.1.3711.15.1.1.2.3.5 | INTEGER | write-only | Resets edge triggered input |
| INT rms_cContact6Reset | 1.3.6.1.4.1.3711.15.1.1.2.3.6 | INTEGER | write-only | Resets edge triggered input |
| INT rms_cContact7Reset | 1.3.6.1.4.1.3711.15.1.1.2.3.7 | INTEGER | write-only | Resets edge triggered input |
| INT rms_cContact8Reset | 1.3.6.1.4.1.3711.15.1.1.2.3.8 | INTEGER | write-only | Resets edge triggered input |
| rms_cContactNormalStates | 1.3.6.1.4.1.3711.15.1.1.2.4 | |||
| INT rms_cContact1NormalState | 1.3.6.1.4.1.3711.15.1.1.2.4.1 | INTEGER | read-write | Set to 0 for normally open condition, 1 for normally closed |
| INT rms_cContact2NormalState | 1.3.6.1.4.1.3711.15.1.1.2.4.2 | INTEGER | read-write | Set to 0 for normally open condition, 1 for normally closed |
| INT rms_cContact3NormalState | 1.3.6.1.4.1.3711.15.1.1.2.4.3 | INTEGER | read-write | Set to 0 for normally open condition, 1 for normally closed |
| INT rms_cContact4NormalState | 1.3.6.1.4.1.3711.15.1.1.2.4.4 | INTEGER | read-write | Set to 0 for normally open condition, 1 for normally closed |
| INT rms_cContact5NormalState | 1.3.6.1.4.1.3711.15.1.1.2.4.5 | INTEGER | read-write | Set to 0 for normally open condition, 1 for normally closed |
| INT rms_cContact6NormalState | 1.3.6.1.4.1.3711.15.1.1.2.4.6 | INTEGER | read-write | Set to 0 for normally open condition, 1 for normally closed |
| INT rms_cContact7NormalState | 1.3.6.1.4.1.3711.15.1.1.2.4.7 | INTEGER | read-write | Set to 0 for normally open condition, 1 for normally closed |
| INT rms_cContact8NormalState | 1.3.6.1.4.1.3711.15.1.1.2.4.8 | INTEGER | read-write | Set to 0 for normally open condition, 1 for normally closed |
| rms_cContactCurrentStates | 1.3.6.1.4.1.3711.15.1.1.2.5 | |||
| INT rms_cContact1CurrentState | 1.3.6.1.4.1.3711.15.1.1.2.5.1 | INTEGER | read-only | The current state of the contact |
| INT rms_cContact2CurrentState | 1.3.6.1.4.1.3711.15.1.1.2.5.2 | INTEGER | read-only | The current state of the contact |
| INT rms_cContact3CurrentState | 1.3.6.1.4.1.3711.15.1.1.2.5.3 | INTEGER | read-only | The current state of the contact |
| INT rms_cContact4CurrentState | 1.3.6.1.4.1.3711.15.1.1.2.5.4 | INTEGER | read-only | The current state of the contact |
| INT rms_cContact5CurrentState | 1.3.6.1.4.1.3711.15.1.1.2.5.5 | INTEGER | read-only | The current state of the contact |
| INT rms_cContact6CurrentState | 1.3.6.1.4.1.3711.15.1.1.2.5.6 | INTEGER | read-only | The current state of the contact |
| INT rms_cContact7CurrentState | 1.3.6.1.4.1.3711.15.1.1.2.5.7 | INTEGER | read-only | The current state of the contact |
| INT rms_cContact8CurrentState | 1.3.6.1.4.1.3711.15.1.1.2.5.8 | INTEGER | read-only | The current state of the contact |
| rms_cContactOFFtoONtraps | 1.3.6.1.4.1.3711.15.1.1.2.6 | |||
| INT rms_cContact1OFFtoONtrap | 1.3.6.1.4.1.3711.15.1.1.2.6.1 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cContact2OFFtoONtrap | 1.3.6.1.4.1.3711.15.1.1.2.6.2 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cContact3OFFtoONtrap | 1.3.6.1.4.1.3711.15.1.1.2.6.3 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cContact4OFFtoONtrap | 1.3.6.1.4.1.3711.15.1.1.2.6.4 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cContact5OFFtoONtrap | 1.3.6.1.4.1.3711.15.1.1.2.6.5 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cContact6OFFtoONtrap | 1.3.6.1.4.1.3711.15.1.1.2.6.6 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cContact7OFFtoONtrap | 1.3.6.1.4.1.3711.15.1.1.2.6.7 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cContact8OFFtoONtrap | 1.3.6.1.4.1.3711.15.1.1.2.6.8 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| rms_cContactOFFtoONrepeatTimers | 1.3.6.1.4.1.3711.15.1.1.2.7 | |||
| INT rms_cContact1OFFtoONrep | 1.3.6.1.4.1.3711.15.1.1.2.7.1 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cContact2OFFtoONrep | 1.3.6.1.4.1.3711.15.1.1.2.7.2 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cContact3OFFtoONrep | 1.3.6.1.4.1.3711.15.1.1.2.7.3 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cContact4OFFtoONrep | 1.3.6.1.4.1.3711.15.1.1.2.7.4 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cContact5OFFtoONrep | 1.3.6.1.4.1.3711.15.1.1.2.7.5 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cContact6OFFtoONrep | 1.3.6.1.4.1.3711.15.1.1.2.7.6 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cContact7OFFtoONrep | 1.3.6.1.4.1.3711.15.1.1.2.7.7 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cContact8OFFtoONrep | 1.3.6.1.4.1.3711.15.1.1.2.7.8 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| rms_cContactONtoOFFtraps | 1.3.6.1.4.1.3711.15.1.1.2.8 | |||
| INT rms_cContact1ONtoOFFtrap | 1.3.6.1.4.1.3711.15.1.1.2.8.1 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cContact2ONtoOFFtrap | 1.3.6.1.4.1.3711.15.1.1.2.8.2 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cContact3ONtoOFFtrap | 1.3.6.1.4.1.3711.15.1.1.2.8.3 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cContact4ONtoOFFtrap | 1.3.6.1.4.1.3711.15.1.1.2.8.4 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cContact5ONtoOFFtrap | 1.3.6.1.4.1.3711.15.1.1.2.8.5 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cContact6ONtoOFFtrap | 1.3.6.1.4.1.3711.15.1.1.2.8.6 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cContact7ONtoOFFtrap | 1.3.6.1.4.1.3711.15.1.1.2.8.7 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cContact8ONtoOFFtrap | 1.3.6.1.4.1.3711.15.1.1.2.8.8 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| rms_cContactONtoOFFrepeatTimers | 1.3.6.1.4.1.3711.15.1.1.2.9 | |||
| INT rms_cContact1ONtoOFFrep | 1.3.6.1.4.1.3711.15.1.1.2.9.1 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cContact2ONtoOFFrep | 1.3.6.1.4.1.3711.15.1.1.2.9.2 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cContact3ONtoOFFrep | 1.3.6.1.4.1.3711.15.1.1.2.9.3 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cContact4ONtoOFFrep | 1.3.6.1.4.1.3711.15.1.1.2.9.4 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cContact5ONtoOFFrep | 1.3.6.1.4.1.3711.15.1.1.2.9.5 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cContact6ONtoOFFrep | 1.3.6.1.4.1.3711.15.1.1.2.9.6 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cContact7ONtoOFFrep | 1.3.6.1.4.1.3711.15.1.1.2.9.7 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cContact8ONtoOFFrep | 1.3.6.1.4.1.3711.15.1.1.2.9.8 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| rms_cOutput | 1.3.6.1.4.1.3711.15.1.1.3 | |||
| rms_cOutputEnables | 1.3.6.1.4.1.3711.15.1.1.3.1 | |||
| INT rms_cOutput1Enable | 1.3.6.1.4.1.3711.15.1.1.3.1.1 | INTEGER | read-write | Set to one enables the output |
| INT rms_cOutput2Enable | 1.3.6.1.4.1.3711.15.1.1.3.1.2 | INTEGER | read-write | Set to one enables the output |
| INT rms_cOutput3Enable | 1.3.6.1.4.1.3711.15.1.1.3.1.3 | INTEGER | read-write | Set to one enables the output |
| rms_cOutputNames | 1.3.6.1.4.1.3711.15.1.1.3.2 | |||
| STR rms_cOutput1Name | 1.3.6.1.4.1.3711.15.1.1.3.2.1 | DisplayString | read-write | The name of the output |
| STR rms_cOutput2Name | 1.3.6.1.4.1.3711.15.1.1.3.2.2 | DisplayString | read-write | The name of the output |
| STR rms_cOutput3Name | 1.3.6.1.4.1.3711.15.1.1.3.2.3 | DisplayString | read-write | The name of the output |
| STR rms_cOutput4Name | 1.3.6.1.4.1.3711.15.1.1.3.2.4 | DisplayString | read-write | The name of the output |
| rms_cOutputStates | 1.3.6.1.4.1.3711.15.1.1.3.3 | |||
| INT rms_cOutput1State | 1.3.6.1.4.1.3711.15.1.1.3.3.1 | INTEGER | read-write | Default State for the output |
| INT rms_cOutput2State | 1.3.6.1.4.1.3711.15.1.1.3.3.2 | INTEGER | read-write | Default State for the output |
| INT rms_cOutput3State | 1.3.6.1.4.1.3711.15.1.1.3.3.3 | INTEGER | read-write | Default State for the output |
| rms_cOutputBooleanStates | 1.3.6.1.4.1.3711.15.1.1.3.4 | |||
| INT rms_cOutput1BooleanState | 1.3.6.1.4.1.3711.15.1.1.3.4.1 | INTEGER | read-only | Set as a result of the AND/OR comparison |
| INT rms_cOutput2BooleanState | 1.3.6.1.4.1.3711.15.1.1.3.4.2 | INTEGER | read-only | Set as a result of the AND/OR comparison |
| INT rms_cOutput3BooleanState | 1.3.6.1.4.1.3711.15.1.1.3.4.3 | INTEGER | read-only | Set as a result of the AND/OR comparison |
| INT rms_cOutput4BooleanState | 1.3.6.1.4.1.3711.15.1.1.3.4.4 | INTEGER | read-only | Set as a result of the AND/OR comparison |
| rms_cOutputOnDelay | 1.3.6.1.4.1.3711.15.1.1.3.5 | |||
| INT rms_cOutput1OnDelay | 1.3.6.1.4.1.3711.15.1.1.3.5.1 | INTEGER | read-write | Delay in seconds for the activation of the output in response to a change into the on state |
| INT rms_cOutput2OnDelay | 1.3.6.1.4.1.3711.15.1.1.3.5.2 | INTEGER | read-write | Delay in seconds for the activation of the output in response to a change into the on state |
| INT rms_cOutput3OnDelay | 1.3.6.1.4.1.3711.15.1.1.3.5.3 | INTEGER | read-write | Delay in seconds for the activation of the output in response to a change into the on state |
| INT rms_cOutput4OnDelay | 1.3.6.1.4.1.3711.15.1.1.3.5.4 | INTEGER | read-write | Delay in seconds for the activation of the output in response to a change into the on state |
| rms_cOutputOffDelay | 1.3.6.1.4.1.3711.15.1.1.3.6 | |||
| INT rms_cOutput1OffDelay | 1.3.6.1.4.1.3711.15.1.1.3.6.1 | INTEGER | read-write | Delay in seconds for the activation of the output in response to a change into the OFF state |
| INT rms_cOutput2OffDelay | 1.3.6.1.4.1.3711.15.1.1.3.6.2 | INTEGER | read-write | Delay in seconds for the activation of the output in response to a change into the OFF state |
| INT rms_cOutput3OffDelay | 1.3.6.1.4.1.3711.15.1.1.3.6.3 | INTEGER | read-write | Delay in seconds for the activation of the output in response to a change into the OFF state |
| INT rms_cOutput4OffDelay | 1.3.6.1.4.1.3711.15.1.1.3.6.4 | INTEGER | read-write | Delay in seconds for the activation of the output in response to a change into the OFF state |
| rms_cOutputStrings | 1.3.6.1.4.1.3711.15.1.1.3.7 | |||
| STR rms_cOutput1BooleanInput | 1.3.6.1.4.1.3711.15.1.1.3.7.1 | DisplayString | read-write | Tn=temperature source, n is one of the following subindex:1->Temp1 LCL,2->Temp1 LWL, 3->Temp1 UWL,4->Temp1 UCL,5->Temp2 LCL,6->Temp2 LWL,7->Temp2 UWL,8->Temp2 UCL. Cn=contact source, n is the contact order number. No spaces used. Max 12 inputs |
| STR rms_cOutput2BooleanInput | 1.3.6.1.4.1.3711.15.1.1.3.7.2 | DisplayString | read-write | Tn=temperature source, n is one of the following subindex:1->Temp1 LCL,2->Temp1 LWL, 3->Temp1 UWL,4->Temp1 UCL,5->Temp2 LCL,6->Temp2 LWL,7->Temp2 UWL,8->Temp2 UCL. Cn=contact source, n is the contact order number. No spaces used. Max 12 inputs |
| STR rms_cOutput3BooleanInput | 1.3.6.1.4.1.3711.15.1.1.3.7.3 | DisplayString | read-write | Tn=temperature source, n is one of the following subindex:1->Temp1 LCL,2->Temp1 LWL, 3->Temp1 UWL,4->Temp1 UCL,5->Temp2 LCL,6->Temp2 LWL,7->Temp2 UWL,8->Temp2 UCL. Cn=contact source, n is the contact order number. No spaces used. Max 12 inputs |
| STR rms_cOutput4BooleanInput | 1.3.6.1.4.1.3711.15.1.1.3.7.4 | DisplayString | read-write | Tn=temperature source, n is one of the following subindex:1->Temp1 LCL,2->Temp1 LWL, 3->Temp1 UWL,4->Temp1 UCL,5->Temp2 LCL,6->Temp2 LWL,7->Temp2 UWL,8->Temp2 UCL. Cn=contact source, n is the contact order number. No spaces used. Max 12 inputs |
| rms_cOutputBooleanSelector | 1.3.6.1.4.1.3711.15.1.1.3.8 | |||
| INT rms_cOutput1BooleanSelector | 1.3.6.1.4.1.3711.15.1.1.3.8.1 | INTEGER | read-write | Set 0 to select OR, and 1 to select AND |
| INT rms_cOutput2BooleanSelector | 1.3.6.1.4.1.3711.15.1.1.3.8.2 | INTEGER | read-write | Set 0 to select OR, and 1 to select AND |
| INT rms_cOutput3BooleanSelector | 1.3.6.1.4.1.3711.15.1.1.3.8.3 | INTEGER | read-write | Set 0 to select OR, and 1 to select AND |
| INT rms_cOutput4BooleanSelector | 1.3.6.1.4.1.3711.15.1.1.3.8.4 | INTEGER | read-write | Set 0 to select OR, and 1 to select AND |
| rms_cOutputOFFtoONtraps | 1.3.6.1.4.1.3711.15.1.1.3.9 | |||
| INT rms_cOutput1OFFtoONtrap | 1.3.6.1.4.1.3711.15.1.1.3.9.1 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cOutput2OFFtoONtrap | 1.3.6.1.4.1.3711.15.1.1.3.9.2 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cOutput3OFFtoONtrap | 1.3.6.1.4.1.3711.15.1.1.3.9.3 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cOutput4OFFtoONtrap | 1.3.6.1.4.1.3711.15.1.1.3.9.4 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| rms_cOutputOFFtoONrepeatTimers | 1.3.6.1.4.1.3711.15.1.1.3.10 | |||
| INT rms_cOutput1OFFtoONrep | 1.3.6.1.4.1.3711.15.1.1.3.10.1 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cOutput2OFFtoONrep | 1.3.6.1.4.1.3711.15.1.1.3.10.2 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cOutput3OFFtoONrep | 1.3.6.1.4.1.3711.15.1.1.3.10.3 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cOutput4OFFtoONrep | 1.3.6.1.4.1.3711.15.1.1.3.10.4 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| rms_cOutputONtoOFFtraps | 1.3.6.1.4.1.3711.15.1.1.3.11 | |||
| INT rms_cOutput1ONtoOFFtrap | 1.3.6.1.4.1.3711.15.1.1.3.11.1 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cOutput2ONtoOFFtrap | 1.3.6.1.4.1.3711.15.1.1.3.11.2 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cOutput3ONtoOFFtrap | 1.3.6.1.4.1.3711.15.1.1.3.11.3 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| INT rms_cOutput4ONtoOFFtrap | 1.3.6.1.4.1.3711.15.1.1.3.11.4 | INTEGER | read-write | Set to 0 for trap disabled, 1 for enabled |
| rms_cOutputONtoOFFrepeatTimers | 1.3.6.1.4.1.3711.15.1.1.3.12 | |||
| INT rms_cOutput1ONtoOFFrep | 1.3.6.1.4.1.3711.15.1.1.3.12.1 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cOutput2ONtoOFFrep | 1.3.6.1.4.1.3711.15.1.1.3.12.2 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cOutput3ONtoOFFrep | 1.3.6.1.4.1.3711.15.1.1.3.12.3 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| INT rms_cOutput4ONtoOFFrep | 1.3.6.1.4.1.3711.15.1.1.3.12.4 | INTEGER | read-write | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
RFC description
Monitors environmental conditions and power output for Knuerr RMS Compact power management systems.
Start monitoring Sinetica RMS Compact environmental monitor (temperature sensor/threshold configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.