RGS200-Switch-MIB

All MIBs › RGS200-Switch-MIB

Last Updated: 2016-03-15

Category: Industrial Networking

Description: Manages RGS200 series industrial Ethernet switch configuration and port statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RGS200-Switch-MIB?

RGS200-Switch-MIB is a vendor MIB for the RGS200 series industrial Ethernet switch, a ruggedized networking product typically used in industrial automation, transportation, or utility environments. It is intended to manage switch configuration and port statistics as part of the industrial networking equipment technology area. No detailed object list or rich module description was available in the source beyond a generic reference to an event type identifier, so the specific breadth of exposed data (interface counters, port link status, environmental sensors) cannot be confirmed here. In general, industrial switch MIBs like this are used to monitor hardware status such as port link up/down state, traffic counters, and sometimes power/temperature health typical of DIN-rail mounted switches, alongside event/trap identifiers for fault conditions. It likely builds on standard IF-MIB/BRIDGE-MIB conventions for interface and switching data common to Ethernet switches. It is deployed in industrial control networks, substations, or transportation systems requiring hardened Ethernet switching. Network engineers evaluating or troubleshooting this functionality can download the RGS200-Switch-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RGS200-Switch-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

RGS200 industrial Ethernet switch

Monitoring Examples

No detailed sample objects were provided for this module beyond a generic event type identifier, so a concrete polling scenario using real object names cannot be constructed; an admin would typically expect per-port link status and traffic counters plus an event/trap table for fault conditions, but this cannot be confirmed from the available data.

What Can Be Monitored

switch event type identifier (unconfirmed - limited object data available)

Imported Objects

From ENTITY-MIB

PhysicalIndex
entPhysicalIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RMON-MIB

OwnerString

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

PhysAddress
RowStatus
TAddress
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
org	1.3
dod	1.3.6
internet	1.3.6.1
private	1.3.6.1.4
enterprises	1.3.6.1.4.1
zyxel	1.3.6.1.4.1.890
products	1.3.6.1.4.1.890.1
enterpriseSolution	1.3.6.1.4.1.890.1.15
esPartnerProducts	1.3.6.1.4.1.890.1.15.5
rgs200_12P	1.3.6.1.4.1.890.1.15.5.1			The MIB module for managing system inventory inforamtion and event/alarm.
ivsSystemMIB	1.3.6.1.4.1.890.1.15.5.1.1
ivsSysInventory	1.3.6.1.4.1.890.1.15.5.1.1.1
OCT invProductModel	1.3.6.1.4.1.890.1.15.5.1.1.1.1	OCTET STRING	read-only	Product Model name.
OCT invSwVersion	1.3.6.1.4.1.890.1.15.5.1.1.1.2	OCTET STRING	read-only	System SW version
OCT invSwBuild	1.3.6.1.4.1.890.1.15.5.1.1.1.3	OCTET STRING	read-only	System SW version built date
PHY invPhyMac	1.3.6.1.4.1.890.1.15.5.1.1.1.4	PhysAddress	read-only
I32 invPortCount	1.3.6.1.4.1.890.1.15.5.1.1.1.5	Integer32	read-only
ivsSysMonitor	1.3.6.1.4.1.890.1.15.5.1.1.2
ivsEventTable	1.3.6.1.4.1.890.1.15.5.1.1.2.1		not-accessible	The Event/Alarm/Log table.
ivsEventEntry	1.3.6.1.4.1.890.1.15.5.1.1.2.1.1		not-accessible	An Entry in the Event table.
I32 ivsEventSeqId	1.3.6.1.4.1.890.1.15.5.1.1.2.1.1.1	Integer32	not-accessible	This object is used by the event table to identify the row of this table.
IVS ivsEventLevel	1.3.6.1.4.1.890.1.15.5.1.1.2.1.1.2	IvsSystemEventType	read-only	This object indicates the level of event.
OCT ivsEventTime	1.3.6.1.4.1.890.1.15.5.1.1.2.1.1.3	OCTET STRING	read-only	This attribute indicates the event occurence time.
OCT ivsEventMessage	1.3.6.1.4.1.890.1.15.5.1.1.2.1.1.4	OCTET STRING	read-only	This attribute indicates the event message.
ivsTrapGroup	1.3.6.1.4.1.890.1.15.5.1.1.2.2
ivsTrapAlmVars	1.3.6.1.4.1.890.1.15.5.1.1.2.2.1
IVS ivsCurrentAlarmSeqId	1.3.6.1.4.1.890.1.15.5.1.1.2.2.1.1	IvsSystemAlarmLevel	read-only
IVS ivsCurrentAlarmState	1.3.6.1.4.1.890.1.15.5.1.1.2.2.1.3	IvsSystemAlarmState	read-only
OCT ivsCurrentAlarmTime	1.3.6.1.4.1.890.1.15.5.1.1.2.2.1.4	OCTET STRING	read-only
ivsManagement	1.3.6.1.4.1.890.1.15.5.1.1.3
INT ivsManagedFlag	1.3.6.1.4.1.890.1.15.5.1.1.3.1	INTEGER	read-write	If it is (1)managed, then alarm LED should be in blink status. If it is (0)un-managed, then alarm LED is normal. Default is (0)un-managed.
ivsTrap	1.3.6.1.4.1.890.1.15.5.1.1.4
ivsAlarmTrap	1.3.6.1.4.1.890.1.15.5.1.1.4.1
NTF ivsAlmTrapPort1Linkdown	1.3.6.1.4.1.890.1.15.5.1.1.4.1.1			Device's port 1 link down alarm happens or cleared.
NTF ivsAlmTrapPort2Linkdown	1.3.6.1.4.1.890.1.15.5.1.1.4.1.2			Device's port 2 link down alarm happens or cleared.
NTF ivsAlmTrapPort3Linkdown	1.3.6.1.4.1.890.1.15.5.1.1.4.1.3			Device's port 3 link down alarm happens or cleared.
NTF ivsAlmTrapPort4Linkdown	1.3.6.1.4.1.890.1.15.5.1.1.4.1.4			Device's port 4 link down alarm happens or cleared.
NTF ivsAlmTrapPort5Linkdown	1.3.6.1.4.1.890.1.15.5.1.1.4.1.5			Device's port 5 link down alarm happens or cleared.
NTF ivsAlmTrapPort6Linkdown	1.3.6.1.4.1.890.1.15.5.1.1.4.1.6			Device's port 6 link down alarm happens or cleared.
NTF ivsAlmTrapPort7Linkdown	1.3.6.1.4.1.890.1.15.5.1.1.4.1.7			Device's port 7 link down alarm happens or cleared.
NTF ivsAlmTrapPort8Linkdown	1.3.6.1.4.1.890.1.15.5.1.1.4.1.8			Device's port 8 link down alarm happens or cleared.
NTF ivsAlmTrapPort9Linkdown	1.3.6.1.4.1.890.1.15.5.1.1.4.1.9			Device's port 9 link down alarm happens or cleared.
NTF ivsAlmTrapPort10Linkdown	1.3.6.1.4.1.890.1.15.5.1.1.4.1.10			Device's port 10 link down alarm happens or cleared.
NTF ivsAlmTrapPort11Linkdown	1.3.6.1.4.1.890.1.15.5.1.1.4.1.11			Device's port 11 link down alarm happens or cleared.
NTF ivsAlmTrapPort12Linkdown	1.3.6.1.4.1.890.1.15.5.1.1.4.1.12			Device's port 12 link down alarm happens or cleared.
NTF ivsAlmTrapPort13Linkdown	1.3.6.1.4.1.890.1.15.5.1.1.4.1.13			Device's port 13 link down alarm happens or cleared.
NTF ivsAlmTrapPort14Linkdown	1.3.6.1.4.1.890.1.15.5.1.1.4.1.14			Device's port 14 link down alarm happens or cleared.
NTF ivsAlmTrapPowerAlarm	1.3.6.1.4.1.890.1.15.5.1.1.4.1.15			Device Power Alarm happens/clear! Normally Power1 and Power2 should both work. If alarmState is set(1), indicates only one of them works! If alarmState is clear(2), indicates alarm disappears!

RFC description

Vendor-private management MIB for the RGS200 switch platform.

Start monitoring Zyxel RGS200 series industrial Ethernet switch (port statistics/event traps) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RGS200-Switch-MIB

What Is RGS200-Switch-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description