MOXA-IO-E2210-MIB

All MIBs › MOXA-IO-E2210-MIB

Organization: Moxa Networking,Inc.

Last Updated: 2009-11-04

Category: Industrial Networking

Description: Manages Moxa ioLogik E2210 remote I/O module digital input and output channels.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MOXA-IO-E2210-MIB?

MOXA-IO-E2210-MIB is a vendor-specific MIB for Moxa's ioLogik E2210 active Ethernet remote I/O module, an industrial device that provides digital input and output channels for automation and monitoring applications. It exposes configuration and status data for each digital input (DI) and digital output (DO) channel, including type, mode, filtering, and trigger settings. Its monitoring value centers on hardware I/O status: diStatus reports the current state of each digital input channel (useful for detecting a sensor/contact change or fault), and diCntStart relates to input event counting, letting an admin monitor discrete physical events (e.g., door open/close, alarm contact) in near real time. There's no explicit stated dependency on other MIBs, being a self-contained device MIB. It's typically deployed in industrial/OT environments (factory floors, remote cabinets) where the E2210 module reports field I/O state back to a SCADA or NMS system. Engineers can download the MOXA-IO-E2210-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MOXA-IO-E2210-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Moxa ioLogik E2210 remote I/O module

Monitoring Examples

An operator would poll diTable/diEntry, indexed by diIndex, and read diStatus to determine the current on/off state of a given digital input channel, revealing whether a connected sensor or contact has changed state. Configuring diTrigger and diFilter lets the admin tune how quickly and reliably a transition is detected and counted via diCntStart, useful for catching brief pulse events. Correspondingly, doTable/doEntry with doIndex would be used to read back or set the state of digital output channels, confirming that commanded relay/output actions actually took effect on the hardware.

What Can Be Monitored

digital input channel status
digital input type/mode/filter settings
digital input trigger and count
digital output channel state

Imported Objects

From RFC-1215

TRAP-TYPE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

How to Use in IPNetwork Monitor

Example using systemTime OID:

Select a Moxa ioLogik E2210 active Ethernet I/O module as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type systemTime into the Find box to locate it in the OID tree, then select it and click OK. It reports i/O server up time (in seconds). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the value is unexpectedly low (e.g. under 10 minutes), since that indicates a recent, possibly unplanned, reboot or restart. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
moxa	1.3.6.1.4.1.8691
e2000	1.3.6.1.4.1.8691.10
e2210	1.3.6.1.4.1.8691.10.2210			The MIB module for Moxa ioLogik Active Ethernet I/O specific information.
NTF activeMessageTrap	1.3.6.1.4.1.8691.10.2210.0.1			The SNMP trap with active message
NTF diChannel0	1.3.6.1.4.1.8691.10.2210.0.1			The channel di-00 status. 0=Off, 1=On in DI mode or N=Count in counter mode
NTF doChannel0	1.3.6.1.4.1.8691.10.2210.0.1			The channel do-00 status. 0=Off, 1=On in DO mode or N=Count in pulse mode
NTF diChannel1	1.3.6.1.4.1.8691.10.2210.0.2			The channel di-01 status. 0=Off, 1=On in DI mode or N=Count in counter mode
NTF doChannel1	1.3.6.1.4.1.8691.10.2210.0.2			The channel do-01 status. 0=Off, 1=On in DO mode or N=Count in pulse mode
NTF diChannel2	1.3.6.1.4.1.8691.10.2210.0.3			The channel di-02 status. 0=Off, 1=On in DI mode or N=Count in counter mode
NTF doChannel2	1.3.6.1.4.1.8691.10.2210.0.3			The channel do-02 status. 0=Off, 1=On in DO mode or N=Count in pulse mode
NTF diChannel3	1.3.6.1.4.1.8691.10.2210.0.4			The channel di-03 status. 0=Off, 1=On in DI mode or N=Count in counter mode
NTF doChannel3	1.3.6.1.4.1.8691.10.2210.0.4			The channel do-03 status. 0=Off, 1=On in DO mode or N=Count in pulse mode
NTF diChannel4	1.3.6.1.4.1.8691.10.2210.0.5			The channel di-04 status. 0=Off, 1=On in DI mode or N=Count in counter mode
NTF doChannel4	1.3.6.1.4.1.8691.10.2210.0.5			The channel do-04 status. 0=Off, 1=On in DO mode or N=Count in pulse mode
NTF diChannel5	1.3.6.1.4.1.8691.10.2210.0.6			The channel di-05 status. 0=Off, 1=On in DI mode or N=Count in counter mode
NTF doChannel5	1.3.6.1.4.1.8691.10.2210.0.6			The channel do-05 status. 0=Off, 1=On in DO mode or N=Count in pulse mode
NTF diChannel6	1.3.6.1.4.1.8691.10.2210.0.7			The channel di-06 status. 0=Off, 1=On in DI mode or N=Count in counter mode
NTF doChannel6	1.3.6.1.4.1.8691.10.2210.0.7			The channel do-06 status. 0=Off, 1=On in DO mode or N=Count in pulse mode
NTF diChannel7	1.3.6.1.4.1.8691.10.2210.0.8			The channel di-07 status. 0=Off, 1=On in DI mode or N=Count in counter mode
NTF doChannel7	1.3.6.1.4.1.8691.10.2210.0.8			The channel do-07 status. 0=Off, 1=On in DO mode or N=Count in pulse mode
NTF diChannel8	1.3.6.1.4.1.8691.10.2210.0.9			The channel di-08 status. 0=Off, 1=On in DI mode or N=Count in counter mode
NTF diChannel9	1.3.6.1.4.1.8691.10.2210.0.10			The channel di-09 status. 0=Off, 1=On in DI mode or N=Count in counter mode
NTF diChannel10	1.3.6.1.4.1.8691.10.2210.0.11			The channel di-10 status. 0=Off, 1=On in DI mode or N=Count in counter mode
NTF diChannel11	1.3.6.1.4.1.8691.10.2210.0.12			The channel di-11 status. 0=Off, 1=On in DI mode or N=Count in counter mode
I32 totalChannelNumber	1.3.6.1.4.1.8691.10.2210.1	Integer32	read-only	Total I/O channels.
OCT serverModel	1.3.6.1.4.1.8691.10.2210.2	OCTET STRING	read-only	The I/O server model.
I32 systemTimeEx	1.3.6.1.4.1.8691.10.2210.3	Integer32	read-only	I/O server up time (in seconds).
OCT firmwareVersion	1.3.6.1.4.1.8691.10.2210.4	OCTET STRING	read-only	The firmware version.
e2210monitor	1.3.6.1.4.1.8691.10.2210.10
diTable	1.3.6.1.4.1.8691.10.2210.10.1		not-accessible	The DI channel monitor table
diEntry	1.3.6.1.4.1.8691.10.2210.10.1.1		not-accessible	The DI channel monitor item
I32 diIndex	1.3.6.1.4.1.8691.10.2210.10.1.1.1	Integer32	not-accessible	The channel DI index.
I32 diType	1.3.6.1.4.1.8691.10.2210.10.1.1.2	Integer32	read-only	The channel DI type. 0=DI, 1=DO
I32 diMode	1.3.6.1.4.1.8691.10.2210.10.1.1.3	Integer32	read-write	The channel DI mode. 0=DI, 1=Event Counter
U32 diStatus	1.3.6.1.4.1.8691.10.2210.10.1.1.4	Unsigned32	read-only	The channel DI status. 0=Off, 1=On in DI mode or N=Count in counter mode
I32 diFilter	1.3.6.1.4.1.8691.10.2210.10.1.1.5	Integer32	read-write	The channel DI counter filter. unit=0.5ms
I32 diTrigger	1.3.6.1.4.1.8691.10.2210.10.1.1.6	Integer32	read-write	The channel DI counter trigger level. 0=L2H, 1=H2L
I32 diCntStart	1.3.6.1.4.1.8691.10.2210.10.1.1.7	Integer32	read-write	The channel DI counter start/stop. 0=stop, 1=start
doTable	1.3.6.1.4.1.8691.10.2210.10.2		not-accessible	The DO channel monitor table
doEntry	1.3.6.1.4.1.8691.10.2210.10.2.1		not-accessible	The DO channel monitor item
I32 doIndex	1.3.6.1.4.1.8691.10.2210.10.2.1.1	Integer32	not-accessible	The channel DO index.
I32 doType	1.3.6.1.4.1.8691.10.2210.10.2.1.2	Integer32	read-only	The channel DO type. 0=DI, DO=1
I32 doMode	1.3.6.1.4.1.8691.10.2210.10.2.1.3	Integer32	read-write	The channel DO mode. 0=DO, 1=Pulse Output
U32 doStatus	1.3.6.1.4.1.8691.10.2210.10.2.1.4	Unsigned32	read-write	The channel DO status. 0=Off, 1=On in DO mode or N=Count in pulse mode
I32 doLowWidth	1.3.6.1.4.1.8691.10.2210.10.2.1.5	Integer32	read-write	The channel DO signal low width. unit=0.5ms
I32 doHighWidth	1.3.6.1.4.1.8691.10.2210.10.2.1.6	Integer32	read-write	The channel DO signal high width. unit=0.5ms
I32 doPulseStart	1.3.6.1.4.1.8691.10.2210.10.2.1.7	Integer32	read-write	The channel DO pulse start/stop. 0=stop, 1=start
logicSettings	1.3.6.1.4.1.8691.10.2210.10.4
irTable	1.3.6.1.4.1.8691.10.2210.10.4.1		not-accessible	Table of internal registers
irEntry	1.3.6.1.4.1.8691.10.2210.10.4.1.1		not-accessible	Table of internal registers
I32 irIndex	1.3.6.1.4.1.8691.10.2210.10.4.1.1.1	Integer32	read-only	The internal register index.
OCT irName	1.3.6.1.4.1.8691.10.2210.10.4.1.1.2	OCTET STRING	read-write	The internal register description.
I32 irValue	1.3.6.1.4.1.8691.10.2210.10.4.1.1.3	Integer32	read-write	The internal register working value.
diChannelTrap	1.3.6.1.4.1.8691.10.2210.11
doChannelTrap	1.3.6.1.4.1.8691.10.2210.12
messageTrap	1.3.6.1.4.1.8691.10.2210.13

RFC description

Moxa MIB for ioLogik E2210 smart Ethernet remote I/O controller that manages digital input/output channels, system parameters, and I/O operations via SNMP. Enables SNMPv1/v2c/v3 monitoring of I/O status and configuration on Moxa industrial remote I/O devices.

Start monitoring Moxa ioLogik E2210 active Ethernet I/O module with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MOXA-IO-E2210-MIB