REDSTONE-RXSYS-MIB

All MIBs › REDSTONE-RXSYS-MIB

Organization: Redstone Communications, Inc.

Last Updated: 1999-07-12

Category: DSL and Broadband Access

Description: Monitors and manages RX system hardware chassis, cards, and platform resources on Redstone routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is REDSTONE-RXSYS-MIB?

REDSTONE-RXSYS-MIB is a Redstone Communications enterprise MIB covering chassis-level hardware and platform resource management for the company's RX-series routing systems. It exposes chassis hardware revision, software version and build date, switch-fabric speed and revision, non-volatile storage (NVS) status/capacity/utilization percentage, and a per-slot table describing installed card slots, alongside a dedicated trap group for chassis fault notifications. This MIB is squarely focused on hardware/software status monitoring: rsRXSysSwVersion/rsRXSysSwBuildDate track running software version, rsRXSysNvsStatus/rsRXSysNvsUtilPct flag non-volatile storage health and capacity issues, and the slot table combined with rsRXSysTrap notifications reveal card insertion/removal or slot-level hardware faults. It is a self-contained Redstone enterprise MIB with no notable dependency on external standard MIBs beyond conventional SNMP framework MIBs. It is deployed on Redstone RX-series chassis-based routers in service-provider or enterprise core/edge deployments where operators need to track chassis hardware health, card slot status, and software version across the platform. Engineers can download the REDSTONE-RXSYS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in REDSTONE-RXSYS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Redstone RX-series chassis-based router

Monitoring Examples

An operator would poll rsRXSysSwVersion and rsRXSysSwBuildDate to confirm the chassis is running the expected software release, and check rsRXSysNvsStatus alongside rsRXSysNvsUtilPct/rsRXSysNvsCapacity to catch non-volatile storage nearing capacity before configuration saves start failing. rsRXSysSlotTable (rsRXSysSlotEntry) per rsRXSysSlotIndex would be checked against rsRXSysSlotCount to confirm all expected line cards are present and recognized, with rsRXSysTrap notifications alerting on a card removal, insertion, or fault event. rsRXSysFabricSpeed/rsRXSysFabricRev would be checked to confirm the switch fabric is operating at its expected rate.

What Can Be Monitored

chassis hardware revision
software version and build date
switch fabric speed/revision
non-volatile storage status and utilization
card slot status
chassis fault traps

Imported Objects

From IF-MIB

InterfaceIndexOrZero

From REDSTONE-SMI

rsMgmt

OBJECT-IDENTITY

From REDSTONE-TC

RsEnable

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
rsRXSysMIB	1.3.6.1.4.1.2773.2.17			Added 'ct1' enumeration to RsSysCardType and rsRxSysPortType.
rsRXSysTrap	1.3.6.1.4.1.2773.2.17.0
NTF rsRXSysSlotOperStatusChange	1.3.6.1.4.1.2773.2.17.0.1			Reports a status change for a slot. This trap is generated on a transition into a stable state (online or disabled) or on a transition out of online.
NTF rsRXSysPowerStatusChange	1.3.6.1.4.1.2773.2.17.0.2			Reports a change in the status of a power element.
NTF rsRXSysTempFanStatusChange	1.3.6.1.4.1.2773.2.17.0.3			Reports a change in the status of the fan tray.
NTF rsRXSysTempStatusChange	1.3.6.1.4.1.2773.2.17.0.4			Reports a change in the status of a temperature sensor.
rsRXSysObjects	1.3.6.1.4.1.2773.2.17.1
rsRXSysGeneral	1.3.6.1.4.1.2773.2.17.1.1
I32 rsRXSysChassisRev	1.3.6.1.4.1.2773.2.17.1.1.1	Integer32	read-only	Chassis revision number. If unknown, the value 255 is reported.
STR rsRXSysSwVersion	1.3.6.1.4.1.2773.2.17.1.1.2	DisplayString	read-only	Currently executing operational software version.
STR rsRXSysSwBuildDate	1.3.6.1.4.1.2773.2.17.1.1.3	DisplayString	read-only	Build date of currently executing operational software version.
rsRXSysFabric	1.3.6.1.4.1.2773.2.17.1.2
I32 rsRXSysFabricSpeed	1.3.6.1.4.1.2773.2.17.1.2.1	Integer32	read-only	Speed of switching fabric, in gigabits per second.
I32 rsRXSysFabricRev	1.3.6.1.4.1.2773.2.17.1.2.2	Integer32	read-only	Fabric revision number. If unknown, the value 255 is reported.
rsRXSysNvs	1.3.6.1.4.1.2773.2.17.1.3
INT rsRXSysNvsStatus	1.3.6.1.4.1.2773.2.17.1.3.1	INTEGER	read-only	Status of non-volatile storage (NVS): notPresent NVS is not installed. writeProtected NVS is write-protected. volumeError Status poll of NVS failed. nearCapacity Utilization exceeds 85% of NVS capacity. ok NVS is operational, none of the preceding conditions apply.
I32 rsRXSysNvsCapacity	1.3.6.1.4.1.2773.2.17.1.3.2	Integer32	read-only	Capacity of NVS storage in megabytes.
I32 rsRXSysNvsUtilPct	1.3.6.1.4.1.2773.2.17.1.3.3	Integer32	read-only	Percentage of NVS storage used. A value of -1 indicates NVS utilization is unknown.
rsRXSysSlot	1.3.6.1.4.1.2773.2.17.1.4
I32 rsRXSysSlotCount	1.3.6.1.4.1.2773.2.17.1.4.1	Integer32	read-only	The number of slots in the system.
rsRXSysSlotTable	1.3.6.1.4.1.2773.2.17.1.4.2		not-accessible	Table of system slots.
rsRXSysSlotEntry	1.3.6.1.4.1.2773.2.17.1.4.2.1		not-accessible	A table entry describing contents of a system slot.
I32 rsRXSysSlotIndex	1.3.6.1.4.1.2773.2.17.1.4.2.1.1	Integer32	not-accessible	Slot number. NOTE: Port numbers are zero-based.
STR rsRXSysSlotDescr	1.3.6.1.4.1.2773.2.17.1.4.2.1.2	DisplayString	read-only	Textual description of the card.
RSS rsRXSysSlotCurrentCardType	1.3.6.1.4.1.2773.2.17.1.4.2.1.3	RsSysCardType	read-only	Type of card actually in the slot. This could be different from the type reported in rsRXSysSlotExpectedCardType, in which case it may be necessary to set rsRXSysSlotControl to 'flush' before this card can be made operational.
I32 rsRXSysSlotRev	1.3.6.1.4.1.2773.2.17.1.4.2.1.4	Integer32	read-only	Revision number of the card. If unknown, the value 255 is reported.
RSE rsRXSysSlotAdminStatus	1.3.6.1.4.1.2773.2.17.1.4.2.1.5	RsEnable	read-write	Exerts administrative control to enable/disable the slot.
INT rsRXSysSlotOperStatus	1.3.6.1.4.1.2773.2.17.1.4.2.1.6	INTEGER	read-only	Status of the card.
INT rsRXSysSlotDisableReason	1.3.6.1.4.1.2773.2.17.1.4.2.1.7	INTEGER	read-only	Indicates the condition causing the slot to be disabled: none Value when card is not disabled. unknown Unknown reason for disablement. assessing The slot content is being assessed (transient initialization state). admin The slot is administratively disabled. cardMismatch The current card type conflicts with configuration associated with a different card type that previously occupied the slot. fabricLimit Card resource requirements exceed available fabric capacity. imageError Software image for card is missing or invalid.
RSS rsRXSysSlotExpectedCardType	1.3.6.1.4.1.2773.2.17.1.4.2.1.8	RsSysCardType	read-only	Type of card associated with this slot through prior presence. After the card is removed, this association persists (and inhibits operation of a different card type in this slot, if one is inserted) until rsRXSysSlotControl is set to 'flush'.
INT rsRXSysSlotControl	1.3.6.1.4.1.2773.2.17.1.4.2.1.9	INTEGER	read-write	Administrative control of this slot: noOperation Setting this value has no effect. flush Flushes configuration associated with a card type that previously occupied this slot. Used to explicitly confirm that the slot is now empty, or contains a different card type. Card must be disabled when this value is asserted. See description for rsRXSysSlotDisableReason. reset Resets the slot.
I32 rsRXSysSlotCpuUtilPct	1.3.6.1.4.1.2773.2.17.1.4.2.1.10	Integer32	read-only	Percentage of CPU utilization. A value of -1 indicates the utilization is unknown.
I32 rsRXSysSlotMemUtilPct	1.3.6.1.4.1.2773.2.17.1.4.2.1.11	Integer32	read-only	Percentage of memory utilization. A value of -1 indicates the utilization is unknown.
T/F rsRXSysSlotIoaPresent	1.3.6.1.4.1.2773.2.17.1.4.2.1.12	TruthValue	read-only	Indicates whether the card's corresponding I/O adapter is present.
I32 rsRXSysSlotPortCount	1.3.6.1.4.1.2773.2.17.1.4.2.1.13	Integer32	read-only	Number of physical ports for the EXPECTED card type for this slot. NOTE: In event of a card mismatch in this slot, the port count for the CURRENT card in this slot is not recognized/reported until the configuration for the EXPECTED card is explicitly flushed via rsRXSysSlotControl.
TIK rsRXSysSlotLastChange	1.3.6.1.4.1.2773.2.17.1.4.2.1.14	TimeTicks	read-only	The value of sysUpTime when the value of rsRXSysSlotOperStatus last changed.
rsRXSysPort	1.3.6.1.4.1.2773.2.17.1.5
rsRXSysPortTable	1.3.6.1.4.1.2773.2.17.1.5.1		not-accessible	Table of system physical ports. The information in this table reflects the ports for the EXPECTED card type in each slot; in event of a card mismatch, this table permits navigation of the existing configuration of the expected card type.
rsRXSysPortEntry	1.3.6.1.4.1.2773.2.17.1.5.1.1		not-accessible	A table entry describing a physical port of the system.
I32 rsRXSysPortIndex	1.3.6.1.4.1.2773.2.17.1.5.1.1.1	Integer32	not-accessible	Port number of this physical port, relative to the slot in which it resides. Each physical port is uniquely distinguished by its slot/port pair. NOTE: Port numbers are zero-based.
STR rsRXSysPortDescr	1.3.6.1.4.1.2773.2.17.1.5.1.1.2	DisplayString	read-only	Textual description of this port.
INT rsRXSysPortType	1.3.6.1.4.1.2773.2.17.1.5.1.1.3	INTEGER	read-only	Type of the physical port: unknown Unknown port type. eth Ethernet. ct3 Channelized T3. oc3c OC-3c (SONET/SDH). ut3Atm Unchannelized T3 (ATM service). ut3Frame Unchannelized T3 (Frame service). ue3Atm Unchannelized E3 (ATM service). ue3Frame Unchannelized E3 (Frame service). ce1 Channelized E1. ct1 Channelized T1.
NUM rsRXSysPortIfIndex	1.3.6.1.4.1.2773.2.17.1.5.1.1.4	InterfaceIndexOrZero	read-only	The ifIndex of the Interfaces MIB ifTable entry corresponding to this physical port; if zero, the ifIndex is unknown or does not exist.
rsRXSysPower	1.3.6.1.4.1.2773.2.17.1.6
rsRXSysPowerTable	1.3.6.1.4.1.2773.2.17.1.6.1		not-accessible	Table of system power elements.
rsRXSysPowerEntry	1.3.6.1.4.1.2773.2.17.1.6.1.1		not-accessible	A table entry describing status of a system power element.
I32 rsRXSysPowerIndex	1.3.6.1.4.1.2773.2.17.1.6.1.1.1	Integer32	not-accessible	Arbitrary integer index to distinguish entries in this table.
STR rsRXSysPowerDescr	1.3.6.1.4.1.2773.2.17.1.6.1.1.2	DisplayString	read-only	Textual description of this power element.
INT rsRXSysPowerStatus	1.3.6.1.4.1.2773.2.17.1.6.1.1.3	INTEGER	read-only	The status of the power element: inactive No power available from this element. active Power available from this element.
rsRXSysTemperature	1.3.6.1.4.1.2773.2.17.1.7
INT rsRXSysTempFanStatus	1.3.6.1.4.1.2773.2.17.1.7.1	INTEGER	read-only	Status of fan tray.
rsRXSysTempTable	1.3.6.1.4.1.2773.2.17.1.7.2		not-accessible	Table of system temperature sensors. Sensors are distributed across the chassis, at least one sensor per populated slot.
rsRXSysTempEntry	1.3.6.1.4.1.2773.2.17.1.7.2.1		not-accessible	A table entry describing status of a temperature sensor.
I32 rsRXSysTempIndex	1.3.6.1.4.1.2773.2.17.1.7.2.1.1	Integer32	not-accessible	Arbitrary integer index to distinguish sensors associated with the same chassis slot.
STR rsRXSysTempDescr	1.3.6.1.4.1.2773.2.17.1.7.2.1.2	DisplayString	read-only	Textual description of this sensor.
INT rsRXSysTempStatus	1.3.6.1.4.1.2773.2.17.1.7.2.1.3	INTEGER	read-only	The status of a temperature sensor: unknown Unknown. failed Failed. tooLow Below nominal range. nominal Within nominal range. tooHigh Above nominal range.
I32 rsRXSysTempValue	1.3.6.1.4.1.2773.2.17.1.7.2.1.4	Integer32	read-only	The temperature measured by this sensor in degrees Celsius. This measurement is valid only if the value of the corresponding rsRXSysTempStatus is nominal.
rsRXSysConformance	1.3.6.1.4.1.2773.2.17.2
rsRXSysCompliances	1.3.6.1.4.1.2773.2.17.2.1
rsRXSysCompliance	1.3.6.1.4.1.2773.2.17.2.1.1			The compliance statement for entities which implement the Redstone System MIB.
rsRXSysGroups	1.3.6.1.4.1.2773.2.17.2.2
rsRXSysGroup	1.3.6.1.4.1.2773.2.17.2.2.1			A collection of management objects pertaining to system capabilities in a Redstone product.

RFC description

Manages RX1400/RX700 system parameters including card types, ports, and fabric configuration.

Start monitoring Redstone RX-series chassis-based router (chassis hardware/software/slot status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download REDSTONE-RXSYS-MIB

What Is REDSTONE-RXSYS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description