RAS-MIB

All MIBs › RAS-MIB

Organization: ITU-T

Last Updated: 1998-12-16

Category: SS7 / Telecom Signaling

Description: Defines ITU-T Registration Authority Server management objects for H.323 gatekeeper monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RAS-MIB?

RAS-MIB is a vendor-neutral ITU-T standards-based MIB defining management objects for a Registration, Admission, and Status (RAS) server, the signaling component of an H.323 gatekeeper used in VoIP call control. It exposes objects related to endpoint registration behavior, such as pre-granted admission requests and registration status by request type, along with conformance group definitions. It is used to monitor the software-level operational status of the gatekeeper's registration process, revealing whether endpoints are successfully registering and being admitted for calls rather than reporting physical hardware sensors. It is built on ITU-T H.225.0 RAS protocol concepts and typically complements other H.323-related MIBs for a full view of VoIP gatekeeper operation. It is typically deployed on H.323 gatekeepers or softswitches handling VoIP endpoint registration and call admission control, consistent with the RAS-MIB RFC definitions it implements.

IPNetwork Monitor allows you to monitor SNMP objects defined in RAS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

vendor-neutral, standards-based MIB, not tied to a specific manufacturer
H.323 gatekeepers, VoIP softswitches

Monitoring Examples

An administrator would monitor rasRegistrationIsregisteredByRRQ to confirm which endpoints have successfully completed registration via Registration Request messages, and check rasRegistrationPregrantedARQ to see whether admission requests are being pre-granted without full validation, which could indicate a relaxed security posture. A drop in successful registrations combined with rising unregistered endpoint counts would reveal a gatekeeper-side registration processing problem or a network reachability issue affecting VoIP endpoints.

What Can Be Monitored

endpoint registration status
pre-granted admission requests
registration request/response counts
gatekeeper conformance group status

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From MULTI-MEDIA-MIB-TC

MmAliasAddress
MmAliasTag
MmCallType
MmEndpointID
MmGatekeeperID
MmGlobalIdentifier
MmH225Crv
MmTAddressTag
mmH323Root	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
RowStatus
TAddress
TruthValue

How to Use in IPNetwork Monitor

Example using rasStatsGatekeeperConfirms OID:

Select an H.323 gatekeeper or VoIP softswitch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rasStatsGatekeeperConfirms into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of granting permission to register messages sent by or received from a gatekeeper. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF admissionReject	0.0.8.341.1.1.2.5.0.4			This message will be sent on generation and reception of admissionReject for the following reasons: 1 - calledPartyNotRegistered 2 - invalidPermission 3 - requestDenied 4 - undefinedReason 5 - callerNotRegistered 6 - routeCallToGatekeeper 7 - invalidEndpointIdentifier 8 - resourceUnavailable 9 - securityDenial 10 - qosControlNotSupported 11 - incompleteAddress
ADR lastArjRasAddress	0.0.8.341.1.1.2.5.0.3	TAddress	read-only	The ras address of the endpoint.
ADR lastArjRasAddressTag	0.0.8.341.1.1.2.5.0.2	MmTAddressTag	read-only	The transport address tag of the endpoint.
INT lastArjReason	0.0.8.341.1.1.2.5.0.1	INTEGER	read-only	This value identifies the reason for the admission reject.
ras	0.0.8.341.1.1.2			RAS MIB
rasAdmission	0.0.8.341.1.1.2.3
INT rasAdmissionAnswerCallIndicator	0.0.8.341.1.1.2.3.1.1.15	INTEGER	read-only	Caller/callee.
I32 rasAdmissionBandwidth	0.0.8.341.1.1.2.3.1.1.18	Integer32	read-only	The allowed maximum bandwidth for the call; may be less than requested by the endpoint.
OID rasAdmissionCallIdentifier	0.0.8.341.1.1.2.3.1.1.5	MmGlobalIdentifier	not-accessible	Call identifier.
INT rasAdmissionCallModel	0.0.8.341.1.1.2.3.1.1.21	INTEGER	read-only	This value of gatekeeper indicates that call signaling is being passed via the gatekeeper, while direct indicates that the endpoint-to-endpoint call mode is in use.
MMC rasAdmissionCallType	0.0.8.341.1.1.2.3.1.1.20	MmCallType	read-only	Using this value, gatekeeper can attempt to determine real bandwidth usage.
OID rasAdmissionConferenceId	0.0.8.341.1.1.2.3.1.1.6	MmGlobalIdentifier	read-only	Conference identifier.
MMH rasAdmissionCRV	0.0.8.341.1.1.2.3.1.1.9	MmH225Crv	read-only	Call reference value of the caller.
ADR rasAdmissionDestAliasAddress	0.0.8.341.1.1.2.3.1.1.14	MmAliasAddress	read-only	The alias address of the callee.
MMA rasAdmissionDestAliasAddressTag	0.0.8.341.1.1.2.3.1.1.13	MmAliasTag	read-only	The alias address tag of the called endpoint.
ADR rasAdmissionDestCallSignallingAddress	0.0.8.341.1.1.2.3.1.1.4	TAddress	read-only	The call signalling address of the callee.
ADR rasAdmissionDestCallSignallingAddressTag	0.0.8.341.1.1.2.3.1.1.3	MmTAddressTag	read-only	The transport address tag of the endpoint.
T/F rasAdmissionDestHandlesBandwidth	0.0.8.341.1.1.2.3.1.1.23	TruthValue	read-only	This value indicates that the calee reserves its own bandwidth.
T/F rasAdmissionDestWillSupplyUUIE	0.0.8.341.1.1.2.3.1.1.26	TruthValue	read-only	This value indicates that the callee will supply Q.931 message info in IRR messages if requested by the gatekeeper
NUM rasAdmissionEndpointId	0.0.8.341.1.1.2.3.1.1.17	MmEndpointID	read-only	Endpoint identifier.
rasAdmissionGroup	0.0.8.341.1.1.2.6.1.3			.
I32 rasAdmissionIRRFrequency	0.0.8.341.1.1.2.3.1.1.19	Integer32	read-only	The time interval in seconds in which the endpoint shall send IRRs to the gatekeeper while on a call.
T/F rasAdmissionIsGatekeeper	0.0.8.341.1.1.2.3.1.1.10	TruthValue	read-only	This value identifies the endpoint being a gatekeeper.
ADR rasAdmissionRasAddress	0.0.8.341.1.1.2.3.1.1.8	TAddress	not-accessible	The call signalling address of the caller.
ADR rasAdmissionRasAddressTag	0.0.8.341.1.1.2.3.1.1.7	MmTAddressTag	read-only	The transport address tag of the endpoint.
T/F rasAdmissionSecurity	0.0.8.341.1.1.2.3.1.1.24	TruthValue	read-only	This value indicates that the endpoint is using security.
ADR rasAdmissionSrcAliasAddress	0.0.8.341.1.1.2.3.1.1.12	MmAliasAddress	read-only	The call alias address of the caller.
MMA rasAdmissionSrcAliasAddressTag	0.0.8.341.1.1.2.3.1.1.11	MmAliasTag	read-only	The alias address tag of the calling endpoint.
ADR rasAdmissionSrcCallSignallingAddress	0.0.8.341.1.1.2.3.1.1.2	TAddress	not-accessible	The call signalling address of the caller.
ADR rasAdmissionSrcCallSignallingAddressTag	0.0.8.341.1.1.2.3.1.1.1	MmTAddressTag	read-only	The transport address tag of the endpoint.
T/F rasAdmissionSrcHandlesBandwidth	0.0.8.341.1.1.2.3.1.1.22	TruthValue	read-only	This value indicates that the caller reserves its own bandwidth.
T/F rasAdmissionSrcWillSupplyUUIE	0.0.8.341.1.1.2.3.1.1.25	TruthValue	read-only	This value indicates that the caller will supply Q.931 message info in IRR messages if requested by the gatekeeper
rasAdmissionTable	0.0.8.341.1.1.2.3.1		not-accessible	This table contains information about entities that have been admitted by the gatekeeper. It is a list of admitted endpoints. The number of entries equals to the number of admitted endpoints.
rasAdmissionTableEntry	0.0.8.341.1.1.2.3.1.1		not-accessible	It contains objects that describe endpoints that are admitted by the gatekeeper.
ROW rasAdmissionTableRowStatus	0.0.8.341.1.1.2.3.1.1.27	RowStatus	read-create	The row status of the entry. This object is required to create or delete rows remotely by a manager.
DAT rasAdmissionTime	0.0.8.341.1.1.2.3.1.1.16	DateAndTime	read-only	Thetime of the admission.
rasConfiguration	0.0.8.341.1.1.2.1
ADR rasConfigurationGatekeeperDiscoveryAddress	0.0.8.341.1.1.2.1.1.1.5	TAddress	read-only	The gatekeeper transport address that allow for manual discovery.
ADR rasConfigurationGatekeeperDiscoveryAddressTag	0.0.8.341.1.1.2.1.1.1.4	MmTAddressTag	read-only	The transport address tag of the gatekeeper.
MMG rasConfigurationGatekeeperIdentifier	0.0.8.341.1.1.2.1.1.1.1	MmGatekeeperID	read-only	String that identifies gatekeeper. For a gatekeeper, this string identifies the gatekeeper. In an endpoint, the field is the desired gatekeeper or NULLString that identifies gatekeeper.
rasConfigurationGroup	0.0.8.341.1.1.2.6.1.1			.
I32 rasConfigurationMaxNumberOfRetries	0.0.8.341.1.1.2.1.1.1.3	Integer32	read-write	The maximum number of times the message shall be resent.
rasConfigurationTable	0.0.8.341.1.1.2.1.1		not-accessible	This table contains information about ras configuration parameters. It is a list of ras configuration parameters entries. The number of entries equals to the number of configuration parameters.
rasConfigurationTableEntry	0.0.8.341.1.1.2.1.1.1		not-accessible	It contains objects that describe the ras configuration parameters.
I32 rasConfigurationTimer	0.0.8.341.1.1.2.1.1.1.2	Integer32	read-write	The amount of time that the timer is set to in seconds. This is the maximum time that the endpoint will wait for the responce.
rasEvents	0.0.8.341.1.1.2.5.0
rasEventsGroup	0.0.8.341.1.1.2.6.1.5			.
rasMIBCompliance	0.0.8.341.1.1.2.6.2			The set of objects required for compliance.
rasMIBConformance	0.0.8.341.1.1.2.6
rasMIBGroups	0.0.8.341.1.1.2.6.1
rasRegistration	0.0.8.341.1.1.2.2
ADR rasRegistrationAdditionalCallSignalingAddress	0.0.8.341.1.1.2.2.4.1.3	TAddress	read-only	The endpoint call signalling address.
ADR rasRegistrationAdditionalCallSignalingAddressTag	0.0.8.341.1.1.2.2.4.1.2	MmTAddressTag	read-only	The transport address tag of the endpoint.
ADR rasRegistrationAdditionalSrcRasAddress	0.0.8.341.1.1.2.2.3.1.3	TAddress	read-only	The transport address of the endpoint.
ADR rasRegistrationAdditionalSrcRasAddressTag	0.0.8.341.1.1.2.2.3.1.2	MmTAddressTag	read-only	The transport address tag of the endpoint.
ADR rasRegistrationAlias	0.0.8.341.1.1.2.2.2.1.3	MmAliasAddress	read-only	The alias of the registred endpoint.
rasRegistrationAliasTable	0.0.8.341.1.1.2.2.2		not-accessible	This table contains information about registered endpoint's aliases. It is a list alias entries. The number of entries equals to the sum of all aliases for all registered endpoints.
rasRegistrationAliasTableEntry	0.0.8.341.1.1.2.2.2.1		not-accessible	It contains an alias that corresponds to a registered endpoint.
I32 rasRegistrationAliasTableIndex	0.0.8.341.1.1.2.2.2.1.1	Integer32	not-accessible	An arbitrary index to this table. This index is one for the first alias for every given ras address. It is incremented by one for each subsequent alias of the same ras address. The last index for a particular ras address is equal to the number of aliases for that endpoint.
MMA rasRegistrationAliasTag	0.0.8.341.1.1.2.2.2.1.2	MmAliasTag	read-only	The alias tag of the registred endpoint.
rasRegistrationCallSignalingAddressTable	0.0.8.341.1.1.2.2.4		not-accessible	This table contains information about registered endpoint's additional call signaling adresses. It is a list of call signaling address entries. The number of entries equals to the sum of all call signaling addresses for all registered endpoints.
rasRegistrationCallSignalingAddressTableEntry	0.0.8.341.1.1.2.2.4.1		not-accessible	It contains a call signaling address that corresponds to the registered endpoint.
I32 rasRegistrationCallSignalingAddressTableIndex	0.0.8.341.1.1.2.2.4.1.1	Integer32	not-accessible	An arbitrary index to this table. This index is one for the first alias for every given ras address. It is incremented by one for each subsequent alias of the same ras address. The last index for a particular ras address is equal to the number of aliases for that endpoint.
ADR rasRegistrationCallSignallingAddress	0.0.8.341.1.1.2.2.1.1.2	TAddress	not-accessible	The endpoint call signalling address.
ADR rasRegistrationCallSignallingAddressTag	0.0.8.341.1.1.2.2.1.1.1	MmTAddressTag	not-accessible	The transport address tag of the endpoint.
T/F rasRegistrationEncryption	0.0.8.341.1.1.2.2.1.1.8	TruthValue	read-only	This value indicates that the endpoint is using encryption.
NUM rasRegistrationEndpointId	0.0.8.341.1.1.2.2.1.1.7	MmEndpointID	read-only	The endpoint identifier.
I32 rasRegistrationEndpointType	0.0.8.341.1.1.2.2.1.1.13	Integer32	read-only	Terminal type represents the type of H.323 terminal: 50 - terminal without MC 60 - gateway without MC 70 - terminal with MC but without MP 80 - gateway with MC but without MP 120 - gatekeeper with MC but without MP 160 - MCU with MC but without MP 90 - gateway with MC and Data MP 130 - gatekeeper with MC and Data MP 170 - MCU with MC and Data MP 100 - gateway containing MC with Data and audio MP 140 - gatekeeper containing MC with Data and audio MP 180 - MCU containing MC with Data and audio MP 110 - gateway containing MC with Data, Audio and Video MP 150 - gatekeeper containing MC with Data, Audio and Video MP 190 - MCU containing MC with Data, Audio and Video MP 240 - entity with active MC .
MMG rasRegistrationGatekeeperId	0.0.8.341.1.1.2.2.1.1.6	MmGatekeeperID	read-only	The identifier of the gatekeeper that this endpoint is registered with.
rasRegistrationGroup	0.0.8.341.1.1.2.6.1.2			.
T/F rasRegistrationIntegrityCheckValue	0.0.8.341.1.1.2.2.1.1.10	TruthValue	read-only	The value indicates that the endpoint will supply the integrity check value.
T/F rasRegistrationIsGatekeeper	0.0.8.341.1.1.2.2.1.1.5	TruthValue	read-only	This value identifies the endpoint being a gatekeeper.
T/F rasRegistrationIsregisteredByRRQ	0.0.8.341.1.1.2.2.1.1.15	TruthValue	read-only	This value indicates if this endpoint was registered dynamically - True or statically - False.
T/F rasRegistrationPregrantedARQ	0.0.8.341.1.1.2.2.1.1.14	TruthValue	read-only	This value indicates if pregranted ARQ exists.
rasRegistrationRasAddressTable	0.0.8.341.1.1.2.2.3		not-accessible	This table contains information about registered endpoint's additional ras addresses. It is a list ras address entries. The number of entries equals to the sum of all ras addresses for all registered endpoints.
rasRegistrationRasAddressTableEntry	0.0.8.341.1.1.2.2.3.1		not-accessible	It contains a ras address that corresponds to the registered endpoint call signaling address.
I32 rasRegistrationRasAddressTableIndex	0.0.8.341.1.1.2.2.3.1.1	Integer32	not-accessible	An arbitrary index to this table. This index is one for the first alias for every given ras address. It is incremented by one for each subsequent alias of the same ras address. The last index for a particular ras address is equal to the number of aliases for that endpoint.
ADR rasRegistrationSrcRasAddress	0.0.8.341.1.1.2.2.1.1.4	TAddress	not-accessible	The ras address of the calling endpoint.
ADR rasRegistrationSrcRasAddressTag	0.0.8.341.1.1.2.2.1.1.3	MmTAddressTag	not-accessible	The ras address tag of the calling endpoint.
rasRegistrationTable	0.0.8.341.1.1.2.2.1		not-accessible	This table contains information about endpoints that are registered with the Gatekeeper. It is a list of registered entities entries. The number of entries equals to the number of registered endpoints.
rasRegistrationTableEntry	0.0.8.341.1.1.2.2.1.1		not-accessible	It contains objects that describe the registered endpoint.
I32 rasRegistrationTableNumberOfAliases	0.0.8.341.1.1.2.2.1.1.11	Integer32	read-only	The number of alias addresses for the endpoint.
ROW rasRegistrationTableRowStatus	0.0.8.341.1.1.2.2.1.1.12	RowStatus	read-create	The row status of the entry. This object is required to create or delete rows remotely by a manager.
T/F rasRegistrationWillSupplyUUIE	0.0.8.341.1.1.2.2.1.1.9	TruthValue	read-only	This value indicates that the endpoint will supply Q.931 message info in IRR messages if requested by the gatekeeper.
rasStats	0.0.8.341.1.1.2.4
C32 rasStatsAdmissionConfirms	0.0.8.341.1.1.2.4.1.1.7	Counter32	read-only	The number of admission request messages sent by or received from a gatekeeper.
C32 rasStatsAdmissionRejects	0.0.8.341.1.1.2.4.1.1.8	Counter32	read-only	The number of admission reject messages sent by or received from a gatekeeper.
C32 rasStatsAdmittedEndpointsNo	0.0.8.341.1.1.2.4.1.1.23	Counter32	read-only	The number of admitted endpoints.
C32 rasStatsBandwidthConfirms	0.0.8.341.1.1.2.4.1.1.9	Counter32	read-only	The number of bandwidth confirm messages received from a gatekeeper.
C32 rasStatsBandwidthRejects	0.0.8.341.1.1.2.4.1.1.10	Counter32	read-only	The number of bandwidth reject messages sent by or received from a gatekeeper.
C32 rasStatsDisengageConfirms	0.0.8.341.1.1.2.4.1.1.11	Counter32	read-only	The number of disengage confirm messages received from a gatekeeper.
C32 rasStatsDisengageRejects	0.0.8.341.1.1.2.4.1.1.12	Counter32	read-only	The number of disengage reject messages sent by a gatekeeper.
C32 rasStatsGatekeeperConfirmsEx	0.0.8.341.1.1.2.4.1.1.1	Counter32	read-only	The number of granting permission to register messages sent by or received from a gatekeeper.
C32 rasStatsGatekeeperRejects	0.0.8.341.1.1.2.4.1.1.2	Counter32	read-only	The number of declining permission to register messages sent by or received from a gatekeeper.
C32 rasStatsGkRoutedCalls	0.0.8.341.1.1.2.4.1.1.26	Counter32	read-only	The number of calls that are routed through Gatekeeper.
rasStatsGroup	0.0.8.341.1.1.2.6.1.4			.
C32 rasStatsIACKs	0.0.8.341.1.1.2.4.1.1.25	Counter32	read-only	The number of IACKs massages received and sent by the endpoint.
C32 rasStatsINAKs	0.0.8.341.1.1.2.4.1.1.24	Counter32	read-only	The number of INAK massages received and sent by the endpoint.
C32 rasStatsInfoRequestResponses	0.0.8.341.1.1.2.4.1.1.16	Counter32	read-only	The number of info request response messages sent by endpoint or received by a gatekeeper.
C32 rasStatsInfoRequests	0.0.8.341.1.1.2.4.1.1.15	Counter32	read-only	The number of info request messages sent by a gatekeeper.
C32 rasStatsLocationConfirms	0.0.8.341.1.1.2.4.1.1.13	Counter32	read-only	The number of location confirm messages sent by or received from a gatekeeper.
C32 rasStatsLocationRejects	0.0.8.341.1.1.2.4.1.1.14	Counter32	read-only	The number of location reject messages sent by or received from a gatekeeper.
C32 rasStatsnonStandardMessages	0.0.8.341.1.1.2.4.1.1.17	Counter32	read-only	The number of non standard messages received/sent.
C32 rasStatsRegisteredEndpointsNo	0.0.8.341.1.1.2.4.1.1.22	Counter32	read-only	The number of registered endpoints.
C32 rasStatsRegistrationConfirms	0.0.8.341.1.1.2.4.1.1.3	Counter32	read-only	The number of registration confirm messages sent by or received from a gatekeeper.
C32 rasStatsRegistrationRejects	0.0.8.341.1.1.2.4.1.1.4	Counter32	read-only	The number of registration reject messages sent by or received from a gatekeeper.
C32 rasStatsRequestInProgress	0.0.8.341.1.1.2.4.1.1.19	Counter32	read-only	The number of request in progress messages received.
C32 rasStatsResourceAvailabilityConfirm	0.0.8.341.1.1.2.4.1.1.21	Counter32	read-only	The number of availability confirm messages received.
C32 rasStatsResourceAvailabilityConfirmations	0.0.8.341.1.1.2.4.1.1.28	Counter32	read-only	The number of RAC massages received and sent by the endpoint.
C32 rasStatsResourceAvailabilityIndications	0.0.8.341.1.1.2.4.1.1.27	Counter32	read-only	The number of RAI massages received and sent by the endpoint.
C32 rasStatsResourceAvailabilityIndicator	0.0.8.341.1.1.2.4.1.1.20	Counter32	read-only	The number of resource availability indicator messages sent by the endpoint.
rasStatsTable	0.0.8.341.1.1.2.4.1		not-accessible	This table contains information about ras statistics variables. It is a list of ras statistics variables entries. The number of entries equals to the number of statistics variables.
rasStatsTableEntry	0.0.8.341.1.1.2.4.1.1		not-accessible	It contains objects that describe the ras statistics variables.
C32 rasStatsUnknownMessages	0.0.8.341.1.1.2.4.1.1.18	Counter32	read-only	The number of unknown messages received.
C32 rasStatsUnregistrationConfirms	0.0.8.341.1.1.2.4.1.1.5	Counter32	read-only	The number of unregistration confirmation messages received.
C32 rasStatsUnregistrationRejects	0.0.8.341.1.1.2.4.1.1.6	Counter32	read-only	The number of unregistration reject messages received.

RFC description

Manages H.323 RAS (Registration, Admission, Status) protocol configuration for gatekeepers and endpoints.

Start monitoring H.323 gatekeepers and VoIP softswitches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RAS-MIB