All MIBs › RAPID-CITY › rcPrFilterAceIpv6ShowDstAddrList
rcPrFilterAceIpv6ShowDstAddrList
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcPrFilterAceIpv6ShowDstAddrList
OID (numeric): 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description:
List of v6 destination address to display.
What is rcPrFilterAceIpv6ShowDstAddrList?
This OID specifies which destination IP addresses (in the newer IPv6 format) should be displayed or used when applying a traffic filter rule. It controls what addresses the rule targets. An operator uses this to configure which remote addresses are affected by a network filtering policy.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.5 snmpwalk -v2c -c public <target> RAPID-CITY::rcPrFilterAceIpv6ShowDstAddrList
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.5.1 snmpget -v2c -c public <target> RAPID-CITY::rcPrFilterAceIpv6ShowDstAddrList.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.202 | rcPowerRanger | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.202.1 | rcPowerRangerMib | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.202.1.1 | rcPowerRangerObjects | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.202.1.1.2 | rcPrFilter | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4 | rcPrFilterAce | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32 | rcPrFilterAceIpv6ShowTable | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1 | rcPrFilterAceIpv6ShowEntry | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.5 | rcPrFilterAceIpv6ShowDstAddrList | RAPID-CITY |