RADLAN-rlMacMulticast-MIB

All MIBs › RADLAN-rlMacMulticast-MIB

Category: IGMP and Multicast, Vendor: RADLAN/Cisco SB

Description: Handles static MAC multicast address entries within the bridge forwarding table.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RADLAN-rlMacMulticast-MIB?

RADLAN-rlMacMulticast-MIB is an enterprise MIB from RADLAN, a switch-software vendor whose embedded L2/L3 stack is licensed and rebranded by multiple OEM switch makers, covering static MAC multicast forwarding entries and IGMP/MLD snooping configuration. It exposes configuration objects for enabling MAC multicast filtering and IGMP snooping, per-VLAN IGMP version and aging timers, and tables of statically configured multicast group-to-VLAN (TV) bindings. From a monitoring perspective it lets an administrator confirm the software-level multicast-forwarding configuration is correct: whether IGMP snooping is enabled on the expected VLANs, what aging timers are in effect for hosts and routers, and which static multicast groups have been provisioned, which helps troubleshoot multicast traffic such as IPTV not reaching or improperly flooding to clients. It builds on the concepts of standard IGMP-snooping conventions found in related IETF work, though it is implemented as RADLAN's own enterprise objects. It is deployed on switches built on the RADLAN embedded switch operating system, commonly found as the underlying software in various OEM-branded managed switches supporting multicast television/video distribution. Engineers can download the RADLAN-rlMacMulticast-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RADLAN-rlMacMulticast-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

switches based on the RADLAN embedded switch OS (various OEM-branded managed switches)

Monitoring Examples

An administrator would check rlIgmpSnoopEnable and rlIgmpSnoopVlanIgmpVersion to confirm snooping is active and using the expected IGMP version on a given VLAN, then poll rlIgmpSnoopMulticastTvTable/rlIgmpSnoopMulticastTvEntry to verify a specific rlIgmpSnoopMulticastTvGroup is correctly bound to the intended rlIgmpSnoopMulticastTvVID. Checking rlIgmpSnoopHostAgingTime and rlIgmpSnoopRouterAgingTime helps explain unexpectedly fast or slow removal of multicast group members from the forwarding table.

What Can Be Monitored

IGMP/MLD snooping enable state
per-VLAN IGMP version
host/router aging timers
static multicast group-to-VLAN bindings
MAC multicast filter status

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressType
InetVersion

From Q-BRIDGE-MIB

PortList
VlanIndex

From RADLAN-DEVICEPARAMS-MIB

rndErrorDesc	OBJECT-TYPE
rndErrorSeverity	OBJECT-TYPE

From RADLAN-MIB

rlMacMulticast	OBJECT-IDENTITY
rnd	OBJECT-IDENTITY
rndNotifications	OBJECT-IDENTITY

From SNMPv2-SMI

IpAddress
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF rlMacMulticastUnregFilterFailed	1.3.6.1.4.1.89.0.1			Warning trap indicating - Setting Mac Unregistered Filtering on port is failed. The bound variable rndErrorDesc provides the interface number.
NTF rlIgmpMldSnoopTriplePlayPort	1.3.6.1.4.1.89.0.208			Informational trap indicating that a query was recieved on a triple play port.
NTF rlbrgIgmpSnoopQrrDuplicateIP	1.3.6.1.4.1.89.0.227			Warning trap indicating that duplicate ip\ipv6 address occured between two queries
T/F rlMacMulticastEnable	1.3.6.1.4.1.89.55.1	TruthValue	read-write	Enable/Disable MAC Multicast bridging in the device.
rlIgmpSnoop	1.3.6.1.4.1.89.55.2
INT rlIgmpSnoopMibVersion	1.3.6.1.4.1.89.55.2.1	INTEGER	read-only	MIB's version, the current version is 3. IGMP Snooping supports IGMPv3.
T/F rlIgmpSnoopEnable	1.3.6.1.4.1.89.55.2.2	TruthValue	read-write	Enable/Disable IGMP Snooping in the switch.
INT rlIgmpSnoopHostAgingTime	1.3.6.1.4.1.89.55.2.3	INTEGER	read-write	The amount of time that should pass before aging out an entry in the rlIgmpSnoopGroupTable will be aged out.
INT rlIgmpSnoopRouterAgingTime	1.3.6.1.4.1.89.55.2.4	INTEGER	read-write	The amount of time that should pass before aging out an entry in the rlIgmpSnoopInterfaceTable will be aged out.
rlIgmpSnoopVlanTable	1.3.6.1.4.1.89.55.2.7		not-accessible	The table listing the per vlan parameters : enable/disable , aging-out timers , filter ports and permanent ports.
rlIgmpSnoopVlanEntry	1.3.6.1.4.1.89.55.2.7.1		not-accessible	An entry (conceptual row) in the rlIgmpSnoopVlanTable.
INT rlIgmpSnoopVlanTag	1.3.6.1.4.1.89.55.2.7.1.1	INTEGER	read-only	The tag of the VLAN for which this entry contains information for an IP Multicast Router.
T/F rlIgmpSnoopVlanEnable	1.3.6.1.4.1.89.55.2.7.1.2	TruthValue	read-write	Enable/Disable IGMP Snooping in the vlan.
T/F rlIgmpSnoopVlanRouterLearn	1.3.6.1.4.1.89.55.2.7.1.3	TruthValue	read-write	Enable/Disable of Learning of routers in the vlan.
INT rlIgmpSnoopVlanHostTimeOut	1.3.6.1.4.1.89.55.2.7.1.4	INTEGER	read-write	The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan.
INT rlIgmpSnoopVlanQuerierTimeOut	1.3.6.1.4.1.89.55.2.7.1.5	INTEGER	read-write	The amount of time where no query is heard until querier is activated
INT rlIgmpSnoopVlanRouterTimeOut	1.3.6.1.4.1.89.55.2.7.1.6	INTEGER	read-write	The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan.
INT rlIgmpSnoopVlanLeaveTimeOut	1.3.6.1.4.1.89.55.2.7.1.7	INTEGER	read-write	The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry.
IGM rlIgmpSnoopVlanIgmpVersion	1.3.6.1.4.1.89.55.2.7.1.8	IgmpVersion	read-only	The current IGMP protocol version running on the VLAN.
POR rlIgmpSnoopVlanRouterPortlist	1.3.6.1.4.1.89.55.2.7.1.9	PortList	read-only	List of router ports learned dynamically on this VLAN from PIM, DVMRP, MRDISC and IGMP Query messages
INT rlIgmpSnoopIGMP224ReportsHandle	1.3.6.1.4.1.89.55.2.8	INTEGER	read-write	This varaiable indicates whether to allow IGMP reports for groups in the 224.0.0.X range when the group address is already manually configured or to ignore.
rlIgmpSnoopMulticastTvTable	1.3.6.1.4.1.89.55.2.10		not-accessible	multicast vlan used for this port
rlIgmpSnoopMulticastTvEntry	1.3.6.1.4.1.89.55.2.10.1		not-accessible	entry of multicast ip
VLA rlIgmpSnoopMulticastTvVID	1.3.6.1.4.1.89.55.2.10.1.1	VlanIndex	read-only	Specify the multicast ip to be used.
IP rlIgmpSnoopMulticastTvGroup	1.3.6.1.4.1.89.55.2.10.1.2	IpAddress	read-only	Specify the multicast ip to be used.
ROW rlIgmpSnoopMulticastTvStatus	1.3.6.1.4.1.89.55.2.10.1.3	RowStatus	read-write	The row status variable, used according to row installation and removal conventions.
rlIgmpSnoopMembershipTable	1.3.6.1.4.1.89.55.2.11		not-accessible	The table listing the IP multicast memberships.
rlIgmpSnoopMembershipEntry	1.3.6.1.4.1.89.55.2.11.1		not-accessible	An entry (conceptual row) in the rlIgmpSnoopMembershipTable.
VLA rlIgmpSnoopMembershipVlanTag	1.3.6.1.4.1.89.55.2.11.1.1	VlanIndex	read-only	The VLAN tag for which this entry contains multicast membership information.
IP rlIgmpSnoopMembershipGroupIpAddress	1.3.6.1.4.1.89.55.2.11.1.2	IpAddress	read-only	The multicast group address.
IP rlIgmpSnoopMembershipSourceIpAddress	1.3.6.1.4.1.89.55.2.11.1.3	IpAddress	read-only	The unicast source address.
POR rlIgmpSnoopMembershipIncPortlist	1.3.6.1.4.1.89.55.2.11.1.4	PortList	read-only	Included ports, where a report message was heard for the group (IGMP version 2\|1) or group and source address (IGMP version 3).
POR rlIgmpSnoopMembershipExcPortlist	1.3.6.1.4.1.89.55.2.11.1.5	PortList	read-only	Excluded ports where an exclude report message was heard for the group and source address (IGMP version 3).
INT rlIgmpSnoopMembershipExpiryTime	1.3.6.1.4.1.89.55.2.11.1.6	INTEGER	read-only	Time till entry will expire.
IGM rlIgmpSnoopMembershipCompatibilityMode	1.3.6.1.4.1.89.55.2.11.1.7	IgmpVersion	read-only	IGMP group compatibility mode.
rlIgmpSnoopQuerierVlanTable	1.3.6.1.4.1.89.55.2.12		not-accessible	A table that contains IGMP Snooping Querier information about every vlan. This is indexed by vlan tag.
rlIgmpSnoopQuerierVlanEntry	1.3.6.1.4.1.89.55.2.12.1		not-accessible	An entry (conceptual row) in the rlIgmpSnoopQuerierVlanTable.
VLA rlIgmpSnoopQuerierVlanTag	1.3.6.1.4.1.89.55.2.12.1.1	VlanIndex	read-only	An IGMP Snoop Querier entry vlan tag.
T/F rlIgmpSnoopQuerierAdminEnable	1.3.6.1.4.1.89.55.2.12.1.2	TruthValue	read-write	The desired administrative state of IGMP Snoop Querier on the vlan.
T/F rlIgmpSnoopQuerierOperEnable	1.3.6.1.4.1.89.55.2.12.1.3	TruthValue	read-only	The current operational state of IGMP Snoop Querier on the vlan.
IP rlIgmpSnoopQuerierAdminAddr	1.3.6.1.4.1.89.55.2.12.1.4	IpAddress	read-write	The desired IP address is being used in IGMP Snoop Querier messages on the vlan.
IP rlIgmpSnoopQuerierOperAddr	1.3.6.1.4.1.89.55.2.12.1.5	IpAddress	read-only	The current operational IP address is being used in IGMP Snoop Querier messages on the vlan.
IGM rlIgmpSnoopQuerierAdminVersionNumber	1.3.6.1.4.1.89.55.2.12.1.6	IgmpVersion	read-write	The highest version number of IGMP Snoop Querier for the vlan.
IGM rlIgmpSnoopQuerierOperVersionNumber	1.3.6.1.4.1.89.55.2.12.1.7	IgmpVersion	read-only	The current operational version number of IGMP Snoop Querier for the vlan.
T/F rlIgmpSnoopQuerierElectionEnable	1.3.6.1.4.1.89.55.2.12.1.8	TruthValue	read-write	Whether or not to participate in querier election. When true, the snooping querier participates in querier election. When false, the snooping querier is the elected querier until a general query is heard from another router on the vlan (always lose).
T/F rlIgmpSnoopQuerierEnable	1.3.6.1.4.1.89.55.2.13	TruthValue	read-write	Globally enable/disable IGMP Snooping Querier in the switch.
INT rlMacMulticastMaxEntriesNum	1.3.6.1.4.1.89.55.3	INTEGER	read-only	The maximum number of Mac Multicast entries the device supports.
rlMacMulticastFilter	1.3.6.1.4.1.89.55.4
POR rlMacMulticastUnregFilterEnable	1.3.6.1.4.1.89.55.4.1	PortList	read-write	Each bit represent a port whether Unregistered Multicast Filtering enable
rlMldSnoop	1.3.6.1.4.1.89.55.5
T/F rlMldSnoopEnable	1.3.6.1.4.1.89.55.5.1	TruthValue	read-write	Enable/Disable Mld Snooping in the switch.
INT rlMldSnoopHostAgingTime	1.3.6.1.4.1.89.55.5.2	INTEGER	read-write	The amount of time that should pass before aging out an entry in the rlMldSnoopGroupTable will be aged out.
INT rlMldSnoopRouterAgingTime	1.3.6.1.4.1.89.55.5.3	INTEGER	read-write	The amount of time that should pass before aging out an entry in the rlMldSnoopInterfaceTable will be aged out.
rlIgmpMldSnoopMembershipTable	1.3.6.1.4.1.89.55.5.4		not-accessible	The table listing the IP multicast memberships.
rlIgmpMldSnoopMembershipEntry	1.3.6.1.4.1.89.55.5.4.1		not-accessible	An entry (conceptual row) in the rlIgmpMldSnoopMembershipTable.
VLA rlIgmpMldSnoopMembershipVlanTag	1.3.6.1.4.1.89.55.5.4.1.1	VlanIndex	read-only	The VLAN tag for which this entry contains multicast membership information.
IPt rlIgmpMldSnoopMembershipGroupIpAddressType	1.3.6.1.4.1.89.55.5.4.1.2	InetAddressType	read-only	Inet type IPv4/IPv6.
IP rlIgmpMldSnoopMembershipGroupIpAddress	1.3.6.1.4.1.89.55.5.4.1.3	InetAddress	read-only	The multicast group address.
IPt rlIgmpMldSnoopMembershipSourceIpAddressType	1.3.6.1.4.1.89.55.5.4.1.4	InetAddressType	read-only	Inet type IPv4/IPv6.
IP rlIgmpMldSnoopMembershipSourceIpAddress	1.3.6.1.4.1.89.55.5.4.1.5	InetAddress	read-only	The unicast source address.
POR rlIgmpMldSnoopMembershipIncPortlist	1.3.6.1.4.1.89.55.5.4.1.6	PortList	read-only	Included ports, where a report message was heard for the group (IGMPv2/V1 or MLDv1) or group and source address (IGMPv3/MLDv2).
POR rlIgmpMldSnoopMembershipExcPortlist	1.3.6.1.4.1.89.55.5.4.1.7	PortList	read-only	list of excluded ports to which an exclude report message was heard for the group and source address (IGMPv3/MLDv2 ).
INT rlIgmpMldSnoopMembershipExpiryTime	1.3.6.1.4.1.89.55.5.4.1.8	INTEGER	read-only	Time till entry will expire.
IGM rlIgmpMldSnoopMembershipCompatibilityMode	1.3.6.1.4.1.89.55.5.4.1.9	IgmpVersion	read-only	IGMP/MLD group compatibility mode.
rlIgmpMldSnoopVlanTable	1.3.6.1.4.1.89.55.5.5		not-accessible	The table lists the per vlan parameters : enable/disable , aging-out timers , filter ports and permanent ports.
rlIgmpMldSnoopVlanEntry	1.3.6.1.4.1.89.55.5.5.1		not-accessible	An entry (conceptual row) in the rlIgmpSnoopVlanTable.
IPt rlIgmpMldSnoopVlanInetAddressType	1.3.6.1.4.1.89.55.5.5.1.1	InetAddressType	read-only	Inet type ipv6/ipv4.
INT rlIgmpMldSnoopVlanTag	1.3.6.1.4.1.89.55.5.5.1.2	INTEGER	read-only	The tag of the VLAN for which this entry contains information for an IP Multicast Router.
T/F rlIgmpMldSnoopVlanEnable	1.3.6.1.4.1.89.55.5.5.1.3	TruthValue	read-write	Enable/Disable IGMP Snooping in the vlan.
T/F rlIgmpMldSnoopVlanRouterLearn	1.3.6.1.4.1.89.55.5.5.1.4	TruthValue	read-write	Enable/Disable of Learning of routers in the vlan.
INT rlIgmpMldSnoopVlanHostTimeOut	1.3.6.1.4.1.89.55.5.5.1.5	INTEGER	read-write	The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan.
INT rlIgmpMldSnoopVlanQuerierTimeOut	1.3.6.1.4.1.89.55.5.5.1.6	INTEGER	read-write	The amount of time where no query is heard until querier is activated
INT rlIgmpMldSnoopVlanRouterTimeOut	1.3.6.1.4.1.89.55.5.5.1.7	INTEGER	read-write	The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan.
INT rlIgmpMldSnoopVlanLeaveTimeOut	1.3.6.1.4.1.89.55.5.5.1.8	INTEGER	read-write	The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry.
IGM rlIgmpMldSnoopVlanIgmpVersion	1.3.6.1.4.1.89.55.5.5.1.9	IgmpVersion	read-only	The current IGMP protocol version running on the VLAN.
POR rlIgmpMldSnoopVlanRouterPortlist	1.3.6.1.4.1.89.55.5.5.1.10	PortList	read-only	List of router ports learned dynamically from PIM, DVMRP, MRDISC, MOSPF and IGMP/MLD Query messages on this VLAN
POR rlIgmpMldSnoopVlanRouterStaticPortlist	1.3.6.1.4.1.89.55.5.5.1.11	PortList	read-write	List of router ports configured statically on this VLAN.
POR rlIgmpMldSnoopVlanRouterForbiddenPortlist	1.3.6.1.4.1.89.55.5.5.1.12	PortList	read-write	List of ports statically configured to NOT be router ports on this VLAN
T/F rlIgmpMldSnoopVlanQueryOverride	1.3.6.1.4.1.89.55.5.5.1.13	TruthValue	read-write	Enable/Disable overriding of Query values
U32 rlIgmpMldSnoopVlanOperRobustness	1.3.6.1.4.1.89.55.5.5.1.14	Unsigned32	read-only	The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP and MLD are robust to (Robustness Variable-1) packet losses.
U32 rlIgmpMldSnoopVlanOperQueryInterval	1.3.6.1.4.1.89.55.5.5.1.15	Unsigned32	read-only	The frequency at which IGMP or MLD Host-Query packets are transmitted on this interface. This variable must be a non-zero value.
U32 rlIgmpMldSnoopVlanOperQueryMaxResponseTime	1.3.6.1.4.1.89.55.5.5.1.16	Unsigned32	read-only	The maximum query response interval advertised in MGMDv2 or v3 queries on this interface.
U32 rlIgmpMldSnoopVlanOperLastMemberQueryInterval	1.3.6.1.4.1.89.55.5.5.1.17	Unsigned32	read-only	The Last Member Query Interval is the Max Query Response Interval inserted into group-specific queries sent in response to leave group messages, and is also the amount of time between group-specific query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if mgmdRouterInterfaceVersion is 1.
U32 rlIgmpMldSnoopVlanOperLastMemberQueryCount	1.3.6.1.4.1.89.55.5.5.1.18	Unsigned32	read-only	Represents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members.
U32 rlIgmpMldSnoopVlanOperStartupQueryInterval	1.3.6.1.4.1.89.55.5.5.1.19	Unsigned32	read-only	This variable represents the interval between General Queries sent by a Querier on startup.
U32 rlIgmpMldSnoopVlanOperStartupQueryCount	1.3.6.1.4.1.89.55.5.5.1.20	Unsigned32	read-only	Represents the number of Queries sent out on startup separated by the Startup Query Interval.
U32 rlIgmpMldSnoopVlanOperHostTimeOut	1.3.6.1.4.1.89.55.5.5.1.21	Unsigned32	read-only	The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. DEFVAL { rlIgmpMldSnoopVlanOperRobustness * rlIgmpMldSnoopVlanOperQueryInterval + rlIgmpMldSnoopVlanOperQueryMaxResponseTime }
U32 rlIgmpMldSnoopVlanOperRouterTimeOut	1.3.6.1.4.1.89.55.5.5.1.22	Unsigned32	read-only	The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. DEFVAL { rlIgmpMldSnoopVlanOperRobustness * rlIgmpMldSnoopVlanOperQueryInterval }
U32 rlIgmpMldSnoopVlanOperLeaveTimeOut	1.3.6.1.4.1.89.55.5.5.1.23	Unsigned32	read-only	The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry. DEFVAL { rlIgmpMldSnoopVlanOperLastMemberQueryCount * rlIgmpMldSnoopVlanOperLastMemberQueryInterval }
U32 rlIgmpMldSnoopVlanAdminRobustness	1.3.6.1.4.1.89.55.5.5.1.24	Unsigned32	read-write	The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP and MLD are robust to (Robustness Variable-1) packet losses.
U32 rlIgmpMldSnoopVlanAdminQueryInterval	1.3.6.1.4.1.89.55.5.5.1.25	Unsigned32	read-write	The frequency at which IGMP or MLD Host-Query packets are transmitted on this interface. This variable must be a non-zero value.
U32 rlIgmpMldSnoopVlanAdminQueryMaxResponseTime	1.3.6.1.4.1.89.55.5.5.1.26	Unsigned32	read-write	The maximum query response interval advertised in MGMDv2 or v3 queries on this interface.
U32 rlIgmpMldSnoopVlanAdminLastMemberQueryInterval	1.3.6.1.4.1.89.55.5.5.1.27	Unsigned32	read-write	The Last Member Query Interval is the Max Query Response Interval inserted into group-specific queries sent in response to leave group messages, and is also the amount of time between group-specific query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if mgmdRouterInterfaceVersion is 1.
U32 rlIgmpMldSnoopVlanAdminLastMemberQueryCount	1.3.6.1.4.1.89.55.5.5.1.28	Unsigned32	read-write	Represents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members. Value 0 is used to indicate usage of default value. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness }
U32 rlIgmpMldSnoopVlanAdminStartupQueryInterval	1.3.6.1.4.1.89.55.5.5.1.29	Unsigned32	read-write	This variable represents the interval between General Queries sent by a Querier on startup.
U32 rlIgmpMldSnoopVlanAdminStartupQueryCount	1.3.6.1.4.1.89.55.5.5.1.30	Unsigned32	read-write	Represents the number of Queries sent out on startup separated by the Startup Query Interval.
U32 rlIgmpMldSnoopVlanAdminHostTimeOut	1.3.6.1.4.1.89.55.5.5.1.31	Unsigned32	read-write	The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness * rlIgmpMldSnoopVlanAdminQueryInterval + rlIgmpMldSnoopVlanAdminQueryMaxResponseTime }
U32 rlIgmpMldSnoopVlanAdminRouterTimeOut	1.3.6.1.4.1.89.55.5.5.1.32	Unsigned32	read-write	The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness * rlIgmpMldSnoopVlanAdminQueryInterval }
U32 rlIgmpMldSnoopVlanAdminLeaveTimeOut	1.3.6.1.4.1.89.55.5.5.1.33	Unsigned32	read-write	The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry. DEFVAL { rlIgmpMldSnoopVlanAdminLastMemberQueryCount * rlIgmpMldSnoopVlanAdminLastMemberQueryInterval }
T/F rlIgmpMldSnoopVlanIsImmediateLeave	1.3.6.1.4.1.89.55.5.5.1.34	TruthValue	read-write	Enable/Disable immediate leave on this Vlan
rlIgmpMldSnoopMulticastTvTable	1.3.6.1.4.1.89.55.5.6		not-accessible	multicast vlan used for this port
rlIgmpMldSnoopMulticastTvEntry	1.3.6.1.4.1.89.55.5.6.1		not-accessible	entry of multicast ip
IPt rlIgmpMldSnoopMulticastTvInetAddressType	1.3.6.1.4.1.89.55.5.6.1.1	InetAddressType	read-only	Inet type ipv6/ipv4.
VLA rlIgmpMldSnoopMulticastTvVID	1.3.6.1.4.1.89.55.5.6.1.2	VlanIndex	read-only	Specify the multicast ip to be used.
IPt rlIgmpMldSnoopMulticastTvGroupAddressType	1.3.6.1.4.1.89.55.5.6.1.3	InetAddressType	read-only	Inet type ipv6/ipv4.
IP rlIgmpMldSnoopMulticastTvGroup	1.3.6.1.4.1.89.55.5.6.1.4	InetAddress	read-only	Specify the multicast ip to be used.
ROW rlIgmpMldSnoopMulticastTvStatus	1.3.6.1.4.1.89.55.5.6.1.5	RowStatus	read-write	The row status variable, used according to row installation and removal conventions.
rlMldSnoopQuerierVlanTable	1.3.6.1.4.1.89.55.5.7		not-accessible	A table that contains MLD Snooping Querier information about every vlan. This is indexed by vlan tag.
rlMldSnoopQuerierVlanEntry	1.3.6.1.4.1.89.55.5.7.1		not-accessible	An entry (conceptual row) in the rlMldSnoopQuerierVlanTable.
VLA rlMldSnoopQuerierVlanTag	1.3.6.1.4.1.89.55.5.7.1.1	VlanIndex	read-only	An MLD Snoop Querier entry vlan tag.
T/F rlMldSnoopQuerierAdminEnable	1.3.6.1.4.1.89.55.5.7.1.2	TruthValue	read-write	The desired administrative state of MLD Snoop Querier on the vlan.
T/F rlMldSnoopQuerierOperEnable	1.3.6.1.4.1.89.55.5.7.1.3	TruthValue	read-only	The current operational state of MLD Snoop Querier on the vlan.
IPt rlMldSnoopQuerierAdminAddrInetAddressType	1.3.6.1.4.1.89.55.5.7.1.4	InetAddressType	read-only	Inet type IPv6/IPv4.
IP rlMldSnoopQuerierAdminAddr	1.3.6.1.4.1.89.55.5.7.1.5	InetAddress	read-write	The desired IP address is being used in MLD Snoop Querier messages on the vlan.
IPt rlMldSnoopQuerierOperAddrInetAddressType	1.3.6.1.4.1.89.55.5.7.1.6	InetAddressType	read-only	Inet type IPv6/IPv4.
IP rlMldSnoopQuerierOperAddr	1.3.6.1.4.1.89.55.5.7.1.7	InetAddress	read-only	The current operational IP address is being used in MLD Snoop Querier messages on the vlan.
MLD rlMldSnoopQuerierAdminVersionNumber	1.3.6.1.4.1.89.55.5.7.1.8	MldVersion	read-write	The highest version number of MLD Snoop Querier for the vlan.
MLD rlMldSnoopQuerierOperVersionNumber	1.3.6.1.4.1.89.55.5.7.1.9	MldVersion	read-only	The current operational version number of MLD Snoop Querier for the vlan.
T/F rlMldSnoopQuerierElectionEnable	1.3.6.1.4.1.89.55.5.7.1.10	TruthValue	read-write	Whether or not to participate in querier election. When true, the snooping querier participates in querier election. When false, the snooping querier is the elected querier until a general query is heard from another router on the vlan (always lose).
T/F rlMldSnoopQuerierEnable	1.3.6.1.4.1.89.55.5.8	TruthValue	read-write	Globally enable/disable MLD Snooping Querier in the switch.
rlIgmpMldSnoopQuerierGlobalAddressTable	1.3.6.1.4.1.89.55.5.9		not-accessible	A table that contains IGMP/MLD Snooping Querier global address.
rlIgmpMldSnoopQuerierGlobalAddressEntry	1.3.6.1.4.1.89.55.5.9.1		not-accessible	An entry (conceptual row) in the rlIgmpMldSnoopQuerierGlobalAddressTable.
INE rlIgmpMldSnoopQuerierGlobalAddressIPVersion	1.3.6.1.4.1.89.55.5.9.1.1	InetVersion	not-accessible	The IP version of this PIM interface. A physical interface may be configured in multiple modes concurrently, e.g., IPv4 and IPv6; however, the traffic is considered to be logically separate.
IPt rlIgmpMldSnoopQuerierGlobalAddressType	1.3.6.1.4.1.89.55.5.9.1.2	InetAddressType	read-only	Inet type IPv6/IPv4.
IP rlIgmpMldSnoopQuerierGlobalAddress	1.3.6.1.4.1.89.55.5.9.1.3	InetAddress	read-write	The desired address to used in IGMP/MLD Snoop Querier messages if such an address is not configured on the vlan.

RFC description

Configures static MAC multicast address entries in the bridge forwarding table.

Start monitoring switches based on the RADLAN embedded switch OS, various OEM-branded managed switches (static MAC multicast/IGMP snooping) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RADLAN-rlMacMulticast-MIB

What Is RADLAN-rlMacMulticast-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description