RADLAN-rlLcli-MIB

All MIBs › RADLAN-rlLcli-MIB

Category: Vendor: RADLAN/Cisco SB

Description: Manages local CLI session parameters and terminal configuration on Marvell switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RADLAN-rlLcli-MIB?

RADLAN-rlLcli-MIB is a Marvell/RADLAN private enterprise MIB managing local CLI (command-line interface) session behavior on RADLAN-based switches, including idle timeout, command-history settings, and per-command authorization levels. It exposes scalars for CLI session timeout and command-history enable/size, plus a command-level table mapping each CLI command (and applicable context) to a required privilege level, action mode, and insertion time. This is a management-plane configuration/access-control MIB rather than a hardware-health MIB: it verifies CLI session timeouts are set appropriately (a security best practice) and audits which commands have elevated or restricted privilege levels, confirming role-based CLI access control is configured as intended. It has no apparent dependency on other standard MIBs, being a self-contained RADLAN management-access extension. It is typically deployed on RADLAN-based switches where admins enforce CLI session timeouts and command-level authorization for operational security. Engineers can download the RADLAN-rlLcli-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RADLAN-rlLcli-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Marvell/RADLAN-based managed Ethernet switch
OEM switches licensing the RADLAN software stack

Monitoring Examples

An administrator auditing CLI access controls would check rlLCliTimeout to confirm idle sessions disconnect after the expected period, and rlLcliCommandLevelTable/rlLcliCommandLevelEntry to verify sensitive commands (identified by rlLcliCommandLevelCommandName and rlLcliCommandLevelContextName) are set to the correct rlLcliCommandLevelCommandLevel. rlLCliHistoryEnable and rlLCliHistorySize show whether command history logging is active and how many entries are retained, relevant for post-incident forensics. rlLcliCommandLevelInsertTime helps identify recently added or modified command-level overrides when auditing unexpected privilege changes.

What Can Be Monitored

CLI session idle timeout
command history enable/size
per-command required privilege level
command-level entry insert time / action mode

Imported Objects

From RADLAN-MIB

rnd	OBJECT-IDENTITY

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlLCli	1.3.6.1.4.1.89.74
INT rlLCliMibVersion	1.3.6.1.4.1.89.74.1	INTEGER	read-only	MIB's version, the current version is 2.
U32 rlLCliTimeout	1.3.6.1.4.1.89.74.2	Unsigned32	read-write	LCLI Timeout indicates the interval in seconds, that the system waits until user input is detected.
T/F rlLCliHistoryEnable	1.3.6.1.4.1.89.74.3	TruthValue	read-write	Indicates if command history function is supported.
U32 rlLCliHistorySize	1.3.6.1.4.1.89.74.4	Unsigned32	read-write	Indicates number of commands that the system will record in its history buffer.
rlLcliCommandLevelTable	1.3.6.1.4.1.89.74.5		not-accessible	This Table maps a CLI command to its level.
rlLcliCommandLevelEntry	1.3.6.1.4.1.89.74.5.1		not-accessible	The row definition for this table.
STR rlLcliCommandLevelCommandName	1.3.6.1.4.1.89.74.5.1.1	DisplayString	read-write	The CLI command name
STR rlLcliCommandLevelContextName	1.3.6.1.4.1.89.74.5.1.2	DisplayString	read-write	The CLI context ID which the command name is associated with
TIK rlLcliCommandLevelInsertTime	1.3.6.1.4.1.89.74.5.1.3	TimeTicks	read-write	The time elapsed until this entry was created.
INT rlLcliCommandLevelCommandLevel	1.3.6.1.4.1.89.74.5.1.4	INTEGER	read-write	The level which is associated with the command name
INT rlLcliCommandLevelActionMode	1.3.6.1.4.1.89.74.5.1.5	INTEGER	read-write	The level action which is associated with the command name
ROW rlLcliCommandLevelStatus	1.3.6.1.4.1.89.74.5.1.6	RowStatus	read-write	The status of the commandLevel table entry.
U32 rlLCliSshTimeout	1.3.6.1.4.1.89.74.6	Unsigned32	read-write	LCLI Timeout indicates the interval in seconds, that the system waits until user input is detected on SSH LCLI.
U32 rlLCliTelnetTimeout	1.3.6.1.4.1.89.74.7	Unsigned32	read-write	LCLI Timeout indicates the interval in seconds, that the system waits until user input is detected on telnet LCLI.
T/F rlLCliTelnetHistoryEnable	1.3.6.1.4.1.89.74.8	TruthValue	read-write	Indicates if command history function is supported for Telnet.
U32 rlLCliTelnetHistorySize	1.3.6.1.4.1.89.74.9	Unsigned32	read-write	Indicates number of commands that the system will record in its history buffer for Telnet.
T/F rlLCliSshHistoryEnable	1.3.6.1.4.1.89.74.10	TruthValue	read-write	Indicates if command history function is supported for Ssh.
U32 rlLCliSshHistorySize	1.3.6.1.4.1.89.74.11	Unsigned32	read-write	Indicates number of commands that the system will record in its history buffer for Ssh.

RFC description

Radlan CLI management MIB controlling command-line interface timeout, history, and command-level access restrictions.

Start monitoring Marvell/RADLAN-based managed Ethernet switch, OEM switches (local CLI session/command authorization) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RADLAN-rlLcli-MIB

What Is RADLAN-rlLcli-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description