RADLAN-PIM-MIB

All MIBs › RADLAN-PIM-MIB

Organization: Marvell Semiconductor, Inc.

Last Updated: 2008-09-25

Category: IGMP and Multicast, Vendor: RADLAN/Cisco SB

Description: Manages Protocol Independent Multicast (PIM) routing configuration and neighbor state on Marvell switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RADLAN-PIM-MIB?

RADLAN-PIM-MIB is a Marvell Semiconductor, Inc. (Radlan switch-software heritage) proprietary MIB extending the standard PIM-STD-MIB with additional per-interface PIM (Protocol Independent Multicast) state and statistics. Its interface table, keyed by ifIndex, records admin/operational status, stub-interface flag, P2P-no-hellos flag, associated MGMD entity index, neighbor count, (*,G) and (S,G) state limits with warning thresholds and stored counts, neighbor filter, assert interval/holdtime, and ASM/SSM group filters, while a statistics table records sent hello/join-prune/assert/bootstrap-message counts. As a configuration/performance MIB it lets an administrator confirm PIM state-table usage against configured limits and watch control-message volume per interface. It is deployed on Marvell (Radlan-based) managed switches running PIM. Engineers can download the RADLAN-PIM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RADLAN-PIM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Marvell (Radlan-based) managed switches (PIM)

Monitoring Examples

An administrator checks rlPimInterfaceSGStateStored against rlPimInterfaceSGStateLimit to confirm PIM (S,G) state isn't approaching its configured capacity on a Marvell Radlan-based switch.

What Can Be Monitored

PIM state-table usage vs. limits and control-message statistics

Imported Objects

From IANA-RTPROTO-MIB

IANAipRouteProtocol

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType
InetVersion

From PIM-STD-MIB

pimInterfaceEntry	OBJECT-TYPE
pimInterfaceIPVersion	OBJECT-TYPE
pimInterfaceIfIndex	OBJECT-TYPE
pimNeighborAddress	OBJECT-TYPE
pimNeighborAddressType	OBJECT-TYPE
pimNeighborIfIndex	OBJECT-TYPE

From RADLAN-MIB

rnd	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using rlPimInterfaceNeighborCount OID:

Select a Marvell (Radlan-based) managed switch (PIM per-interface state/statistics) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rlPimInterfaceNeighborCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of PIM neighbors on this interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlPim	1.3.6.1.4.1.89.211			The private MIB module definition for PIM MIB.
rlPimInterfaceTable	1.3.6.1.4.1.89.211.1		not-accessible	This table is used to create and manage the {interface, IP version} pairs for which PIM is enabled.
rlPimInterfaceEntry	1.3.6.1.4.1.89.211.1.1		not-accessible	An entry (conceptual row) in the pimInterfaceTable.
ADM rlPimInterfaceAdminStatus	1.3.6.1.4.1.89.211.1.1.3	AdminStatus	read-create	The desired administrative state of this interface.
NPG rlPimInterfaceOperStatus	1.3.6.1.4.1.89.211.1.1.4	NpgOperStatus	read-only	The current operational state of this interface.
T/F rlPimInterfaceStubInterface	1.3.6.1.4.1.89.211.1.1.5	TruthValue	read-create	Whether this interface is a 'stub interface' with regard to PIM. If this is set to 'true', no PIM packets are sent or processed (if received) on this interface. This should be set to 'true' if there are no other PIM routers on the interface but there may be untrusted hosts on the interface, to prevent the router processing forged PIM messages from those hosts. If there are other PIM routers on this interface, this must be left as 'false'. Changing the value of this object while the interface is operational causes the interface to be deactivated and then reactivated.
T/F rlPimInterfaceP2PNoHellos	1.3.6.1.4.1.89.211.1.1.6	TruthValue	read-create	Whether this interface is a point-to-point interface on which we do not require the neighbor to send PIM-Hello signals. Provided for back-compatibility with some older implementations that do not send Hellos on point-to-point links. Changing the value of this object while the interface is operational causes the interface to be deactivated and then reactivated.
NUM rlPimInterfaceMgmdEntIndex	1.3.6.1.4.1.89.211.1.1.7	NumericIndexOrZero	read-create	The HAF entity index of the DC-MGMD (for example, for IPv4 this is DC-IGMP) Router component that owns this interface. Zero is a wildcard value meaning that no DC-MGMD Router component currently owns the interface, and the first DC-MGMD Router component that sends Group Membership information for this interface will take ownership of it.
G32 rlPimInterfaceNeighborCountEx	1.3.6.1.4.1.89.211.1.1.8	Gauge32	read-only	The number of PIM neighbors on this interface.
U32 rlPimInterfaceStarGStateLimit	1.3.6.1.4.1.89.211.1.1.9	Unsigned32	read-create	The maximum number of groups for which DC-PIM TIB Manager is allowed to store (*,G,I) state specific to this interface. A value of zero means that there is no limit.
U32 rlPimInterfaceStarGStateWarnThold	1.3.6.1.4.1.89.211.1.1.10	Unsigned32	read-create	DC-PIM TIB Manager logs an exception if the number of groups for which it is storing (*,G,I) state specific to this interface exceeds this value. A value of zero means that there is no warning threshold.
G32 rlPimInterfaceStarGStateStored	1.3.6.1.4.1.89.211.1.1.11	Gauge32	read-only	The number of groups for which DC-PIM TIB Manager is storing (*,G,I) state specific to this interface.
U32 rlPimInterfaceSGStateLimit	1.3.6.1.4.1.89.211.1.1.12	Unsigned32	read-create	The maximum number of {source, group} pairs for which DC-PIM TIB Manager is allowed to store (S,G,I) state specific to this interface. A value of zero means that there is no limit.
U32 rlPimInterfaceSGStateWarnThold	1.3.6.1.4.1.89.211.1.1.13	Unsigned32	read-create	DC-PIM TIB Manager logs an exception if the number of {source, group} pairs for which it is storing (S,G,I) state specific to this interface exceeds this value. A value of zero means that there is no warning threshold.
G32 rlPimInterfaceSGStateStored	1.3.6.1.4.1.89.211.1.1.14	Gauge32	read-only	The number of {source, group} pairs for which DC-PIM TIB Manager is storing (S,G,I) state specific to this interface.
STR rlPimInterfaceNeighborFilter	1.3.6.1.4.1.89.211.1.1.15	DisplayString	read-create	When neighbor filtering is enabled, the local router will process link-local multicast PIM messages received on this interface only if the originator's IP address (that is, the source address in the IP header) is included in the standard access list corresponding to the list name configured for this object. Note that this filter does not apply to unicast PIM messages, even if the originator is directly connected to the local router. So, for example, this filter has no effect on the processing of received Register messages. In other words, the standard access list is a whitelist, and the local router will treat any router excluded from the list as not being a valid PIM neighbor. To filter out all PIM neighbors, either configure this object to be the list name of an 'exclude all' standard access list, or use the rlPimInterfaceStubInterface object.
U32 rlPimInterfaceAssertInterval	1.3.6.1.4.1.89.211.1.1.16	Unsigned32	read-create	The frequency at which this router sends PIM Assert messages on this interface when it is the assert winner. This object corresponds to the 'Assert_Time' minus the 'Assert_Override_Interval' defined in the PIM-SM specification [I-D.ietf-rlPim-sm-v2-new]. This must be less than rlPimInterfaceAssertHoldtime.
U32 rlPimInterfaceAssertHoldtime	1.3.6.1.4.1.89.211.1.1.17	Unsigned32	read-create	The interval before this router leaves assert loser state on this interface, unless it receives a PIM Assert message that refreshes this state. This object corresponds to the 'Assert_Time' timer value defined in the PIM-SM specification [I-D.ietf-rlPim-sm-v2-new]. Note that configuring different values for this object for different routers on the same interface might lead to incorrect protocol operation.
STR rlPimInterfaceAsmGrpFilter	1.3.6.1.4.1.89.211.1.1.18	DisplayString	read-create	When ASM group filtering is enabled, then for groups in the ASM space the local router will: - process PIM (,G) Join and (S,G) Join messages received on this interface only if the group address is included in the standard access list corresponding to the list index value configured for this object - only send PIM (,G) Join and (S,G) Join messages over this interface if the group address is included in the standard access list corresponding to the list index value configured for this object. Local membership requests from the MGMD Router component are not filtered. These should be filtered by the MGMD Router component. In other words, the standard access list is a whitelist of the ASM groups for which DC-PIM is permitted to request or receive traffic over the interface. rlPimInterfaceAsmGrpFilter defaults to an empty string, which indicates that no access list is specified. If the name does not correspond to a valid access list, no group addresses will match the list and therefore all PIM (*,G) Join and PIM (S,G) Join messages will be filtered.
STR rlPimInterfaceSsmSrcAndGrpFilter	1.3.6.1.4.1.89.211.1.1.19	DisplayString	read-create	When SSM source and group filtering is enabled, then for groups in the SSM space the local router will - process PIM (S,G) Join messages received on this interface only if the {source, group} pair is included in the extended access list corresponding to the list index value configured for this object - only send PIM (S,G) Join messages over this interface if the {source, group} pair is included in the extended access list corresponding to the list index value configured for this object. In other words, the extended access list is a whitelist of the SSM {source, group} pairs for which DC-PIM is permitted to request or receive traffic over the interface. rlPimInterfaceSsmSrcAndGrpFilter defaults to an empty string, which indicates that no access list is specified. If the name does not correspond to a valid access list, no {source, group} pairs will match the list and therefore all PIM (S,G) Join messages will be filtered.
rlPimIfStatsTable	1.3.6.1.4.1.89.211.2		not-accessible	This table lists the statistics for {interface, IP version} pairs for which PIM is enabled. Note that any messages filtered out by rlPimInterfaceNeighborFilter do not contribute to any statistics in this table except for rlPimIfStatsNumFilteredOut.
rlPimIfStatsEntry	1.3.6.1.4.1.89.211.2.1		not-accessible	An entry (conceptual row) in the rlPimIfStatsTable.
NUM rlPimIfStatsNumSentHello	1.3.6.1.4.1.89.211.2.1.1	PimStatsCounter	read-only	The number of PIM Hello messages that have been sent out this interface.
NUM rlPimIfStatsNumSentJoinPrune	1.3.6.1.4.1.89.211.2.1.2	PimStatsCounter	read-only	The number of PIM Join/Prune messages that have been sent out this interface.
NUM rlPimIfStatsNumSentAssert	1.3.6.1.4.1.89.211.2.1.3	PimStatsCounter	read-only	The number of PIM Assert messages that have been sent out this interface.
NUM rlPimIfStatsNumSentBsm	1.3.6.1.4.1.89.211.2.1.4	PimStatsCounter	read-only	The number of PIM Bootstrap Router messages that have been sent out this interface. DC-PIM always multicasts this type of message.
NUM rlPimIfStatsNumErrHello	1.3.6.1.4.1.89.211.2.1.5	PimStatsCounter	read-only	The number of PIM Hello messages that have been received on this interface that have contained errors.
NUM rlPimIfStatsNumRecvUnknownNbr	1.3.6.1.4.1.89.211.2.1.6	PimStatsCounter	read-only	The number of PIM Join/Prune, Assert and multicast Bootstrap Router messages that have been received on this interface from a neighbor from which we had not previously received a valid PIM Hello message (and for which rlPimInterfaceP2PNoHellos was 'false'). Bootstrap Router messages which are sent to a unicast address are not included in this count.
NUM rlPimIfStatsNumUnknownHelloOpt	1.3.6.1.4.1.89.211.2.1.7	PimStatsCounter	read-only	The number of unknown options that have been received in PIM Hello messages on this interface.
NUM rlPimIfStatsNumFilteredOut	1.3.6.1.4.1.89.211.2.1.8	PimStatsCounter	read-only	The number of link-local multicast PIM messages filtered out by rlPimInterfaceNeighborFilter on this interface.
rlPimNmEntTable	1.3.6.1.4.1.89.211.3		not-accessible	This table is used to create and manage DC-PIM Neighbor Manager entities.
rlPimNmEntEntry	1.3.6.1.4.1.89.211.3.1		not-accessible	Each entry represents an instance of the DC-PIM Neighbor Manager entity.
NUM rlPimNmEntIndex	1.3.6.1.4.1.89.211.3.1.1	NumericIndex	not-accessible	The index of this rlPimNmEntEntry. This is the HAF entity index passed on the entity create parameters.
ROW rlPimNmEntRowStatus	1.3.6.1.4.1.89.211.3.1.2	RowStatus	read-create	Used to create and delete a DC-PIM Neighbor Manager Entity Table entry.
ADM rlPimNmEntAdminStatus	1.3.6.1.4.1.89.211.3.1.3	AdminStatus	read-create	The desired administrative state of the DC-PIM Neighbor Manager entity.
NPG rlPimNmEntOperStatus	1.3.6.1.4.1.89.211.3.1.4	NpgOperStatus	read-only	The current operational state of the DC-PIM Neighbor Manager entity.
NUM rlPimNmEntTmEntIndex	1.3.6.1.4.1.89.211.3.1.5	NumericIndex	read-create	The HAF entity index value of the DC-PIM TIB Manager to join to. Once set, the value of this object cannot be changed.
NPG rlPimNmEntI3JoinOperStatus	1.3.6.1.4.1.89.211.3.1.6	NpgOperStatus	read-only	The current operational state of the I3 join. rlPimNmEntOperStatus cannot transition to 'operStatusUp' unless this object has a value of 'operStatusUp', and cannot transition to 'operStatusDown' unless this object has a value of 'operStatusDown'.
NPG rlPimNmEntNmiJoinOperStatus	1.3.6.1.4.1.89.211.3.1.7	NpgOperStatus	read-only	The current operational state of the NMI join. rlPimNmEntOperStatus cannot transition to 'operStatusUp' unless this object has a value of 'operStatusUp', and cannot transition to 'operStatusDown' unless this object has a value of 'operStatusDown'.
NPG rlPimNmEntSckJoinOperStatus	1.3.6.1.4.1.89.211.3.1.8	NpgOperStatus	read-only	The current operational state of the SCK join. rlPimNmEntOperStatus cannot transition to 'operStatusUp' unless this object has a value of 'operStatusUp', and cannot transition to 'operStatusDown' unless this object has a value of 'operStatusDown'.
T/F rlPimNmEntClearStatsCounters	1.3.6.1.4.1.89.211.3.1.9	TruthValue	read-create	Set this object to 'true' to cause DC-PIM Neighbor Manager to reset all its statistics counters (that is, all objects with syntax PimStatsCounter that are either in the rlPimNmEntStatsTable, or in a row of the rlPimIfStatsTable or rlPimNbrStatsTable for an interface for which rlPimInterfaceNmEntIndex equals rlPimNmEntIndex). Reading the value of this object has no meaning.
TIK rlPimNmEntStatsUpTime	1.3.6.1.4.1.89.211.3.1.10	TimeTicks	read-only	The time since the statistics counters were last reset, either by establishing the NMI join (caused by activating DC-PIM TIB Manager or DC-PIM Neighbor Manager, or by recovery after NMI join failure/fail-over) or by setting the rlPimNmEntClearStatsCounters object to 'true'.
T/F rlPimNmEntEnableUnicastMessages	1.3.6.1.4.1.89.211.3.1.11	TruthValue	read-create	Set this object to 'true' to enable DC-PIM Neighbor Manager to send and receive unicast PIM messages. This object must only be set to 'false' if the local router will never be an RP for any multicast group, and will never be the DR for any connected source that sends data to any ASM group. Note that this will always be the case if the local router will perform only the SSM subset of PIM-SM.
T/F rlPimNmEntAcceptUnicastBsms	1.3.6.1.4.1.89.211.3.1.12	TruthValue	read-create	Set this object to 'true' to enable DC-PIM Neighbor Manager to accept PIM Bootstrap Messages (BSMs) which are sent to DC-PIM as unicast messages. Setting the object to 'false' means that DC-PIM Neighbor Manager ignores received unicast BSMs. The setting of this object has no effect on the ability of DC-PIM to accept BSMs which are multicast. DC-PIM only ever multicasts BSMs; it never sends them as unicast messages. This object can only be set to 'true' if the rlPimNmEntEnableUnicastMessages object is also set to 'true'.
STD rlPimNmEntCrpAdvFilterIndex	1.3.6.1.4.1.89.211.3.1.13	StdAccessListListIndexOrZero	read-create	Set this object to zero to disable Candidate-RP Advertisement filtering. This means that the local router will process a Candidate-RP Advertisement message from any source IP address. Set this object to a non-zero value to enable Candidate-RP Advertisement filtering. The value gives the standard access list index used to filter received Candidate-RP Advertisement messages. The local router will process a received Candidate-RP Advertisement message only if its source IP address is included in the specified standard access list. In other words, the standard access list is a whitelist of the unicast sources from which DC-PIM is permitted to accept Candidate-RP advertisements.
rlPimNmEntStatsTable	1.3.6.1.4.1.89.211.4		not-accessible	This table lists the statistics for DC-PIM Neighbor Manager entities. Note that any messages filtered out by rlPimInterfaceNeighborFilter do not contribute to any statistics in this table. Note that in the case of critical parsing errors, only the first error encountered will be counted. The checks are made in the following order. - Length. - Checksum. - Message type. - Version.
rlPimNmEntStatsEntry	1.3.6.1.4.1.89.211.4.1		not-accessible	Each entry represents the statistics for a DC-PIM Neighbor Manager entity.
NUM rlPimNmEntStatsNumSentCRPAdvert	1.3.6.1.4.1.89.211.4.1.1	PimStatsCounter	read-only	The number of PIM Candidate-RP-Advertisement messages that have been sent by this DC-PIM Neighbor Manager entity.
NUM rlPimNmEntStatsNumSentRegister	1.3.6.1.4.1.89.211.4.1.2	PimStatsCounter	read-only	The number of PIM Register messages that have been sent by this DC-PIM Neighbor Manager entity. Note that this only includes PIM Register messages forwarded to other members of Anycast-RP sets, and Null-Register messages. It does not include Register-encapsulated data packets sent from the DR to the RP; these are sent by the data plane.
NUM rlPimNmEntStatsNumSentRegisterStop	1.3.6.1.4.1.89.211.4.1.3	PimStatsCounter	read-only	The number of PIM Register-Stop messages that have been sent by this DC-PIM Neighbor Manager entity.
NUM rlPimNmEntStatsNumRecvCRPAdvert	1.3.6.1.4.1.89.211.4.1.4	PimStatsCounter	read-only	The number of valid PIM Candidate-RP-Advertisement messages that have been received by this DC-PIM Neighbor Manager entity.
NUM rlPimNmEntStatsNumRecvRegister	1.3.6.1.4.1.89.211.4.1.5	PimStatsCounter	read-only	The number of valid PIM Register messages that have been received by this DC-PIM Neighbor Manager entity.
NUM rlPimNmEntStatsNumRecvRegisterStop	1.3.6.1.4.1.89.211.4.1.6	PimStatsCounter	read-only	The number of valid PIM Register-Stop messages that have been received by this DC-PIM Neighbor Manager entity.
NUM rlPimNmEntStatsNumErrCRPAdvert	1.3.6.1.4.1.89.211.4.1.7	PimStatsCounter	read-only	The number of PIM Candidate-RP-Advertisement messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors.
NUM rlPimNmEntStatsNumErrRegister	1.3.6.1.4.1.89.211.4.1.8	PimStatsCounter	read-only	The number of PIM Register messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors.
NUM rlPimNmEntStatsNumErrRegisterStop	1.3.6.1.4.1.89.211.4.1.9	PimStatsCounter	read-only	The number of PIM Register-Stop messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors.
NUM rlPimNmEntStatsNumRecvIgnoredType	1.3.6.1.4.1.89.211.4.1.10	PimStatsCounter	read-only	The number of PIM messages with a known but unsupported PIM message type that have been received by this DC-PIM Neighbor Manager entity.
NUM rlPimNmEntStatsNumRecvUnknownType	1.3.6.1.4.1.89.211.4.1.11	PimStatsCounter	read-only	The number of PIM messages with an unknown PIM message type that have been received by this DC-PIM Neighbor Manager entity.
NUM rlPimNmEntStatsNumRecvUnknownVer	1.3.6.1.4.1.89.211.4.1.12	PimStatsCounter	read-only	The number of PIM messages with an unknown PIM version that have been received by this DC-PIM Neighbor Manager entity.
NUM rlPimNmEntStatsNumRecvBadChecksum	1.3.6.1.4.1.89.211.4.1.13	PimStatsCounter	read-only	The number of PIM messages with a incorrect PIM checksum that have been received by this DC-PIM Neighbor Manager entity.
NUM rlPimNmEntStatsNumRecvBadLength	1.3.6.1.4.1.89.211.4.1.14	PimStatsCounter	read-only	The number of PIM messages with a length too short to contain a common PIM header that have been received by this DC-PIM Neighbor Manager entity.
NUM rlPimNmEntStatsNumCRPAdvfiltered	1.3.6.1.4.1.89.211.4.1.15	PimStatsCounter	read-only	The number of C-RP-Advertisement messages which have been filtered out by this DC-PIM Neighbor Manager entity.
rlPimNbrStatsTable	1.3.6.1.4.1.89.211.5		not-accessible	This table lists the statistics for PIM neighbors. Note that if a neighbor's Liveness Timer expires (including on receipt of a PIM Hello message with a zero Holdtime), this event resets all of the statistics in this table. However, if a neighbor's Generation ID value changes, none of the statistics in this table are affected.
rlPimNbrStatsEntry	1.3.6.1.4.1.89.211.5.1		not-accessible	An entry (conceptual row) in the rlPimNbrStatsTable.
NUM rlPimNbrStatsNumRecvHello	1.3.6.1.4.1.89.211.5.1.1	PimStatsCounter	read-only	The number of valid PIM Hello messages that have been received from this neighbor.
NUM rlPimNbrStatsNumRecvJoinPrune	1.3.6.1.4.1.89.211.5.1.2	PimStatsCounter	read-only	The number of valid PIM Join/Prune messages that have been received from this neighbor.
NUM rlPimNbrStatsNumRecvAssert	1.3.6.1.4.1.89.211.5.1.3	PimStatsCounter	read-only	The number of valid PIM Assert messages that have been received from this neighbor.
NUM rlPimNbrStatsNumRecvBSM	1.3.6.1.4.1.89.211.5.1.4	PimStatsCounter	read-only	The number of valid PIM Bootstrap messages that have been received from this neighbor.
NUM rlPimNbrStatsNumErrJoinPrune	1.3.6.1.4.1.89.211.5.1.5	PimStatsCounter	read-only	The number of PIM Join/Prune messages that have been received from this neighbor that have contained errors. Note that this does not include messages for which the RP in the message differs from the RP known by the local router, nor does it include (*,G) messages received for SSM groups.
NUM rlPimNbrStatsNumErrAssert	1.3.6.1.4.1.89.211.5.1.6	PimStatsCounter	read-only	The number of PIM Assert messages that have been received from this neighbor that have contained errors.
NUM rlPimNbrStatsNumErrBSM	1.3.6.1.4.1.89.211.5.1.7	PimStatsCounter	read-only	The number of PIM Bootstrap messages that have been received from this neighbor that have contained errors.
rlPimTmEntTable	1.3.6.1.4.1.89.211.6		not-accessible	This table is used to create and manage DC-PIM TIB Manager entities.
rlPimTmEntEntry	1.3.6.1.4.1.89.211.6.1		not-accessible	Each entry represents an instance of the DC-PIM TIB Manager entity.
NUM rlPimTmEntIndex	1.3.6.1.4.1.89.211.6.1.1	NumericIndex	not-accessible	The index of this rlPimTmEntEntry. This is the HAF entity index passed on the entity create parameters.
ROW rlPimTmEntRowStatus	1.3.6.1.4.1.89.211.6.1.2	RowStatus	read-create	Used to create and delete a DC-PIM TIB Manager Entity Table entry.
ADM rlPimTmEntAdminStatus	1.3.6.1.4.1.89.211.6.1.3	AdminStatus	read-create	The desired administrative state of the DC-PIM TIB Manager entity.
NPG rlPimTmEntOperStatus	1.3.6.1.4.1.89.211.6.1.4	NpgOperStatus	read-only	The current operational state of the DC-PIM TIB Manager entity.
U32 rlPimTmEntGStateLimit	1.3.6.1.4.1.89.211.6.1.5	Unsigned32	read-create	The maximum number of groups for which DC-PIM TIB Manager is allowed to store non-interface specific (*,G) and/or (S,G) state. A value of zero means that there is no limit.
U32 rlPimTmEntGStateWarnThold	1.3.6.1.4.1.89.211.6.1.6	Unsigned32	read-create	DC-PIM TIB Manager logs an exception if the number of groups for which it is storing non-interface specific (*,G) and/or (S,G) state exceeds this value. A value of zero means that there is no warning threshold.
G32 rlPimTmEntGStateStored	1.3.6.1.4.1.89.211.6.1.7	Gauge32	read-only	The number of groups for which DC-PIM TIB Manager is storing non-interface specific (*,G) and/or (S,G) state.
U32 rlPimTmEntSGStateLimit	1.3.6.1.4.1.89.211.6.1.8	Unsigned32	read-create	The maximum number of {source, group} pairs for which DC-PIM TIB Manager is allowed to store non-interface specific (S,G) state. A value of zero means that there is no limit.
U32 rlPimTmEntSGStateWarnThold	1.3.6.1.4.1.89.211.6.1.9	Unsigned32	read-create	DC-PIM TIB Manager logs an exception if the number of {source, group} pairs for which it is storing non-interface specific (S,G) state exceeds this value. A value of zero means that there is no warning threshold.
G32 rlPimTmEntSGStateStored	1.3.6.1.4.1.89.211.6.1.10	Gauge32	read-only	The number of {source, group} pairs for which DC-PIM TIB Manager is storing non-interface specific (S,G) state.
U32 rlPimTmEntStarGIStateLimit	1.3.6.1.4.1.89.211.6.1.11	Unsigned32	read-create	The maximum number of {group, interface} pairs for which DC-PIM TIB Manager is allowed to store (*,G,I) state. A value of zero means that there is no limit.
U32 rlPimTmEntStarGIStateWarnThold	1.3.6.1.4.1.89.211.6.1.12	Unsigned32	read-create	DC-PIM TIB Manager logs an exception if the number of {group, interface} pairs for which it is storing (*,G,I) state exceeds this value. A value of zero means that there is no warning threshold.
G32 rlPimTmEntStarGIStateStored	1.3.6.1.4.1.89.211.6.1.13	Gauge32	read-only	The number of {group, interface} pairs for which DC-PIM TIB Manager is storing (*,G,I) state.
U32 rlPimTmEntSGIStateLimit	1.3.6.1.4.1.89.211.6.1.14	Unsigned32	read-create	The maximum number of {source, group, interface} triplets for which DC-PIM TIB Manager is allowed to store (S,G,I) state. A value of zero means that there is no limit.
U32 rlPimTmEntSGIStateWarnThold	1.3.6.1.4.1.89.211.6.1.15	Unsigned32	read-create	DC-PIM TIB Manager logs an exception if the number of {source, group, interface} triplets for which it is storing (S,G,I) state exceeds this value. A value of zero means that there is no warning threshold.
G32 rlPimTmEntSGIStateStored	1.3.6.1.4.1.89.211.6.1.16	Gauge32	read-only	The number of {source, group, interface} triplets for which DC-PIM TIB Manager is storing (S,G,I) state.
STR rlPimTmEntAsmGrpFilter	1.3.6.1.4.1.89.211.6.1.17	DisplayString	read-create	When ASM group filtering is enabled, then for groups in the ASM space, the local router will: - process received PIM (,G) Join and (S,G) Join messages only if the group address is included in the standard access list corresponding to the list index value configured for this object, and - accept (,G) and (S,G) local membership requests from the MGMD Router component only if the group address is included in the standard access list corresponding to the list index value configured for this object. In other words, the standard access list is a whitelist of the ASM groups for which DC-PIM is permitted to request traffic. Note that DC-PIM will never Register-encapsulate multicast data packets for groups that are blocked by this filter. See rlPimTmEntRegSrcAndGrpFilter for additional Register message filtering options. rlPimTmEntAsmGrpFilter defaults to an empty string, which indicates that no access list is specified.
STR rlPimTmEntSsmSrcAndGrpFilter	1.3.6.1.4.1.89.211.6.1.18	DisplayString	read-create	When SSM source and group filtering is enabled, then for groups in the SSM space, the local router will: - process received PIM (S,G) Join messages only if the {source, group} pair is included in the extended access list corresponding to the list index value configured for this object, and - accept (S,G) local membership requests from the MGMD Router component only if the {source, group} pair is included in the extended access list corresponding to the list index value configured for this object. In other words, the extended access list is a whitelist of the SSM {source, group} pairs for which DC-PIM is permitted to request traffic. rlPimTmEntSsmSrcAndGrpFilter defaults to an empty string, which indicates that no access list is specified.
STR rlPimTmEntRegSrcAndGrpFilter	1.3.6.1.4.1.89.211.6.1.19	DisplayString	read-create	When Register message filtering by source and group address is enabled then: - for groups for which the local router is the RP, it will process received PIM Register messages as normal only if the {source, group} pair of the encapsulated multicast data packet is included in the extended access list corresponding to the list index value configured for this object; if the {source, group} pair is excluded from the extended access list, the local router will send a Register-Stop message, and - on interfaces on which the local router is the DR, it will encapsulate received multicast data packets and forward them in PIM Register messages only if the {source, group} pair of the multicast data packet is included in the extended access list corresponding to the list index value configured for this object. In other words, the extended access list is a whitelist of the {source, group} pairs for which the local router is permitted to Register-encapsulate/decapsulate multicast data packets. rlPimTmEntRegSrcAndGrpFilter defaults to an empty string, which indicates that no access list is specified.
U32 rlPimTmEntRegSuppressionTime	1.3.6.1.4.1.89.211.6.1.20	Unsigned32	read-create	The mean value of the randomized interval during which a DR stops Register-encapsulation after receiving a PIM Register-Stop message. This object corresponds to the 'Register_Suppression_Time' defined in the PIM-SM specification [I-D.ietf-dcPim-sm-v2-new]. Note that configuring different values for this object for different routers in the PIM domain might lead to incorrect protocol operation.
U32 rlPimTmEntRegProbeTime	1.3.6.1.4.1.89.211.6.1.21	Unsigned32	read-create	The time to wait for a PIM Register-Stop message after sending a PIM Null-Register message, before resuming Register-encapsulation at a DR. This object corresponds to the 'Register_Probe_Time' defined in the PIM-SM specification [I-D.ietf-dcPim-sm-v2-new].
U32 rlPimTmEntKeepalivePeriod	1.3.6.1.4.1.89.211.6.1.22	Unsigned32	read-create	The time keep (S,G) state alive in the absence of PIM (S,G) Join messages, (S,G) local membership or (S,G) data packets. This object corresponds to the 'Keepalive_Period' defined in the PIM-SM specification [I-D.ietf-dcPim-sm-v2-new]. Note that this value must also be configured in the MPF stub, as the duration of its Data Flow Liveness timer. Note that configuring different values for this object for different routers in the PIM domain might lead to incorrect protocol operation.
T/F rlPimTmEntSendIfStateChangeTraps	1.3.6.1.4.1.89.211.6.1.23	TruthValue	read-create	Setting this object to 'true' means that DC-PIM TIB Manager will send a rlPimInterfaceStateChange trap when an interface's operational state changes.
IPt rlPimTmEntSupportedAddrType	1.3.6.1.4.1.89.211.6.1.24	InetAddressType	read-create	This field indicates the address family type that this entity supports. On routers which support multiple address families, separate DC-PIM-TM and DC-PIM-NM entities must be configured for each family. This configuration can only be updated when the row status of the TM entity is NotInService or the admin status is Down.
T/F rlPimEmbeddedRpEnabled	1.3.6.1.4.1.89.211.7	TruthValue	read-write	The enabled status of Embedded-RP function for PIM-SM on this system.

RFC description

Marvell Semiconductor private MIB extension for Protocol Independent Multicast (PIM) configuration and monitoring on network switches.

Start monitoring Marvell (Radlan-based) managed switches (PIM per-interface state/statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RADLAN-PIM-MIB