RADLAN-DHCPv6-CLIENT

All MIBs › RADLAN-DHCPv6-CLIENT

Category: DHCP, Vendor: RADLAN/Cisco SB

Description: Configures DHCPv6 client operation for IPv6 address acquisition on management interfaces.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RADLAN-DHCPv6-CLIENT?

RADLAN-DHCPv6-CLIENT is a private Radlan/Marvell MIB module for configuring and monitoring DHCPv6 client operation used to acquire IPv6 addresses and prefixes on management or routed interfaces of a switch. It exposes per-interface DHCPv6 client configuration such as prefix delegation and stateless mode settings, along with status objects reporting refresh timers and information-refresh values received from the DHCPv6 server. In terms of software status monitoring, it lets an administrator verify that the DHCPv6 client process on a given interface is actively obtaining and refreshing its lease/configuration information rather than stalled or unsupported. It builds on the IETF DHCPv6 protocol concepts (RFC 3315) as implemented in vendor firmware. It is typically deployed on Radlan/Marvell-based managed switches, where administrators consult the RADLAN-DHCPv6-CLIENT MIB to support IPv6 management addressing.

IPNetwork Monitor allows you to monitor SNMP objects defined in RADLAN-DHCPv6-CLIENT. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Radlan/Marvell-based managed switches

Monitoring Examples

An administrator would poll rlDhcpv6ClientTable entries indexed by rlDhcpv6ClientIfIndex to check rlDhcpv6ClientPd and rlDhcpv6ClientStateless flags, confirming which mode (prefix delegation vs. stateless) is active on an interface. Watching rlDhcpv6ClientInfoRefreshReceived versus rlDhcpv6ClientInfoRefreshConf would reveal whether the server is honoring the configured refresh interval or if the client has stopped refreshing, indicating loss of IPv6 management connectivity. rlDhcpv6ClientSupported indicates whether the platform/interface even supports DHCPv6 client operation.

What Can Be Monitored

DHCPv6 client enable state per interface
prefix delegation mode
stateless mode
information refresh interval
information refresh received/remaining time
reconfigure support

Imported Objects

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressIPv6
InetAddressPrefixLength
InetAddressType

From RADLAN-DHCPv6

rlDhcpv6Client

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT rlDhcpv6ClientMibVersion	1.3.6.1.4.1.89.214.2.1	INTEGER	read-only
T/F rlDhcpv6ClientSupported	1.3.6.1.4.1.89.214.2.2	TruthValue	read-only
rlDhcpv6ClientTable	1.3.6.1.4.1.89.214.2.3		not-accessible	The table saved ipv6 DHCP clients and their services.
rlDhcpv6ClientEntry	1.3.6.1.4.1.89.214.2.3.1		not-accessible	An entry in rlDhcpv6Client.
NUM rlDhcpv6ClientIfIndex	1.3.6.1.4.1.89.214.2.3.1.1	InterfaceIndex	read-only	The interface that ipv6 DHCP client is running on.
INT rlDhcpv6ClientPd	1.3.6.1.4.1.89.214.2.3.1.2	INTEGER	read-only	Enables Prefix Delegation service on the interface.
INT rlDhcpv6ClientStateless	1.3.6.1.4.1.89.214.2.3.1.3	INTEGER	read-write	Enables Stateless service on the interface.
INT rlDhcpv6ClientReconfigure	1.3.6.1.4.1.89.214.2.3.1.4	INTEGER	read-only	Enables reconfiguration service on the interface.
U32 rlDhcpv6ClientInfoRefreshMin	1.3.6.1.4.1.89.214.2.3.1.5	Unsigned32	read-write	Defines the minimum refresh time between information-request packets on the same interface.
U32 rlDhcpv6ClientInfoRefreshConf	1.3.6.1.4.1.89.214.2.3.1.6	Unsigned32	read-write	Defines the refresh time between information-request packets on the same interface.
U32 rlDhcpv6ClientInfoRefreshReceived	1.3.6.1.4.1.89.214.2.3.1.7	Unsigned32	read-only	Shows the received time from DHCP server untill next information-request packet.
U32 rlDhcpv6ClientInfoRefreshRemain	1.3.6.1.4.1.89.214.2.3.1.8	Unsigned32	read-only	Shows the remain time untill next information-request packet.
IPt rlDhcpv6ClientDhcpServerInetAddressType	1.3.6.1.4.1.89.214.2.3.1.9	InetAddressType	read-only	Contains Inet address Type of current DHCPv6 server.
IP rlDhcpv6ClientDhcpServerInetAddress	1.3.6.1.4.1.89.214.2.3.1.10	InetAddress	read-only	Contains Inet address of current DHCPv6 server.
OCT rlDhcpv6ClientDhcpServerDuid	1.3.6.1.4.1.89.214.2.3.1.11	OCTET STRING	read-only	Contains DUID of current DHCPv6 server.
U32 rlDhcpv6ClientDhcpServerPreference	1.3.6.1.4.1.89.214.2.3.1.12	Unsigned32	read-only	Contains preference of current DHCPv6 server.
INT rlDhcpv6ClientState	1.3.6.1.4.1.89.214.2.3.1.13	INTEGER	read-only	shows the state machine.
STR rlDhcpv6ClientTftpServerName	1.3.6.1.4.1.89.214.2.3.1.14	DisplayString	read-only	The Tftp server name received by DHCPv6 stateless service.
STR rlDhcpv6ClientTftpFileName	1.3.6.1.4.1.89.214.2.3.1.15	DisplayString	read-only	Name of file to use in configuration process received by DHCPv6 stateless service.
STR rlDhcpv6ClientTimeZone	1.3.6.1.4.1.89.214.2.3.1.16	DisplayString	read-only	The timezone received by DHCPv6 stateless service
INT rlDhcpv6ClientOperStatus	1.3.6.1.4.1.89.214.2.3.1.17	INTEGER	read-only	The operational status of this entry. Enabled or Disabled .
INT rlDhcpv6ClientDisableReason	1.3.6.1.4.1.89.214.2.3.1.18	INTEGER	read-only	The disable operational status reason.
ROW rlDhcpv6ClientStatus	1.3.6.1.4.1.89.214.2.3.1.19	RowStatus	read-create	The status of this entry. Creating the entry when ipv6 DHCP is enabled OR ipv6 DHCP stateless in enabled OR ipv6 DHCP pd is enabled.
T/F rlDhcpv6ClientInfoRefreshIsReceived	1.3.6.1.4.1.89.214.2.3.1.20	TruthValue	read-only	Shows whether information-request option is received.
STR rlDhcpv6ClientIndirectImageFileName	1.3.6.1.4.1.89.214.2.3.1.21	DisplayString	read-only	Name of file to use in autoupdate process received by DHCPv6 stateless service.
rlDhcpv6ClientAuxDnsServerListTable	1.3.6.1.4.1.89.214.2.4		not-accessible	The table saved the list of DNS servers received by DHCPv6 stateless service. This is an auxulary table for rlDhcpv6ClientEntry.
rlDhcpv6ClientAuxDnsServerListEntry	1.3.6.1.4.1.89.214.2.4.1		not-accessible	An entry in rlDhcpv6ClientAuxDnsServerListTable.
NUM rlDhcpv6ClientAuxDnsServerListIfIndex	1.3.6.1.4.1.89.214.2.4.1.1	InterfaceIndex	not-accessible	The IfIndex in rlDhcpv6ClientAuxDnsServerListEntry.
INT rlDhcpv6ClientAuxDnsServerListPriority	1.3.6.1.4.1.89.214.2.4.1.2	INTEGER	not-accessible	The priority of the entry.
ADR rlDhcpv6ClientAuxDnsServerListAddress	1.3.6.1.4.1.89.214.2.4.1.3	InetAddressIPv6	read-only	DNS server address received by DHCPv6 stateless service
rlDhcpv6ClientAuxSntpServerListTable	1.3.6.1.4.1.89.214.2.5		not-accessible	The table saved the list of Sntp servers received by DHCPv6 stateless service. This is an auxulary table for rlDhcpv6ClientEntry.
rlDhcpv6ClientAuxSntpServerListEntry	1.3.6.1.4.1.89.214.2.5.1		not-accessible	An entry in rlDhcpv6ClientAuxSntpServerListTable.
NUM rlDhcpv6ClientAuxSntpServerListIfIndex	1.3.6.1.4.1.89.214.2.5.1.1	InterfaceIndex	not-accessible	The IfIndex in rlDhcpv6ClientAuxSntpServerEntry.
INT rlDhcpv6ClientAuxSntpServerListPriority	1.3.6.1.4.1.89.214.2.5.1.2	INTEGER	not-accessible	The priority of the entry.
ADR rlDhcpv6ClientAuxSntpServerListAddress	1.3.6.1.4.1.89.214.2.5.1.3	InetAddressIPv6	read-only	Sntp server address received by DHCPv6 stateless service
rlDhcpv6ClientAuxDomainNameSearchListTable	1.3.6.1.4.1.89.214.2.6		not-accessible	The table saved the list of Domain Name Search received by DHCPv6 stateless service. This is an auxulary table for rlDhcpv6ClientEntry.
rlDhcpv6ClientAuxDomainNameSearchListEntry	1.3.6.1.4.1.89.214.2.6.1		not-accessible	An entry in rlDhcpv6ClientAuxDomainNameSearchListTable.
NUM rlDhcpv6ClientAuxDomainNameSearchListIfIndex	1.3.6.1.4.1.89.214.2.6.1.1	InterfaceIndex	not-accessible	The IfIndex in rlDhcpv6ClientAuxDomainNameSearchEntry.
INT rlDhcpv6ClientAuxDomainNameSearchListPriority	1.3.6.1.4.1.89.214.2.6.1.2	INTEGER	not-accessible	The priority of the entry.
STR rlDhcpv6ClientAuxDomainNameSearchListName	1.3.6.1.4.1.89.214.2.6.1.3	DisplayString	read-only	Domain Name in DomainNameSearchList received by DHCPv6 stateless service
rlDhcpv6ClientCommandTable	1.3.6.1.4.1.89.214.2.7		read-only	Action MIB for DHCP v6 Renew command.
rlDhcpv6ClientCommandEntry	1.3.6.1.4.1.89.214.2.7.1		not-accessible	The row definition for this table.
NUM rlDhcpv6ClientCommandIfIndex	1.3.6.1.4.1.89.214.2.7.1.1	InterfaceIndex	not-accessible	The IfIndex in rlDhcpv6ClientAuxDomainNameSearchEntry.
INT rlDhcpv6ClientCommandAction	1.3.6.1.4.1.89.214.2.7.1.2	INTEGER	read-write	Action to apply. The default value is none.
INT rlDhcpv6ClientEnabledByDefaultRemovedIfindex	1.3.6.1.4.1.89.214.2.8	INTEGER	read-write	DHCPv6 Client flag is relevant when mtsc parameter DHCPv6_client_enabled_by_default is TRUE. If the MIB has non zero value the meaning is that DHCP client has removed from configuration by the user on the interface and signs to application not to add DHCPv6 client entry. Otherwise (zero value) - the meaning is that DHCPv6 client entry must be added.

RFC description

DHCPv6 client MIB for IPv6 DHCP configuration and management on network interfaces.

Start monitoring Radlan/Marvell-based managed switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RADLAN-DHCPv6-CLIENT

What Is RADLAN-DHCPv6-CLIENT?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description