RADLAN-CDP-MIB

All MIBs › RADLAN-CDP-MIB

Organization: Marvell Technology Group Ltd.

Last Updated: 2015-03-04

Category: Vendor: RADLAN/Cisco SB

Description: Configures and monitors Cisco Discovery Protocol (CDP) on Marvell switch interfaces.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RADLAN-CDP-MIB?

RADLAN-CDP-MIB is a private Marvell/Radlan switch MIB that configures and monitors Cisco Discovery Protocol (CDP) support, giving Marvell-based switches interoperability with Cisco neighbor-discovery tooling. It exposes a neighbor cache table of discovered adjacent devices, protocol counters, and configuration items like the source interface used to advertise CDP and the voice VLAN ID announced to phones. Rather than hardware sensors, its monitoring value lies in software/protocol status: the cache table reveals whether neighbor discovery is actively working, and counters plus the duplex-mismatch logging flag surface protocol-level faults such as misconfigured neighbors. It implements Cisco's proprietary CDP protocol rather than a formal IETF MIB, though it depends on IF-MIB ifIndex values for interface association. It is typically deployed on switches in mixed-vendor networks needing topology visibility alongside Cisco equipment. Engineers can download the RADLAN-CDP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RADLAN-CDP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Marvell/Radlan-based managed switch

Monitoring Examples

rlCdpCacheTable/rlCdpCacheEntry lists discovered neighbor devices per interface, letting an admin confirm expected Cisco neighbors are visible. rlCdpCountersTable's rlCdpCountersName/rlCdpCountersValue pairs expose protocol counters (e.g., packets sent/received or errors); a sudden spike would suggest misbehaving neighbor devices or a flapping link. rlCdpLogMismatchDuplexEnable, when enabled, causes duplex mismatches detected via CDP neighbor exchange to be logged, a common root cause of interface errors that would otherwise be hard to diagnose.

What Can Be Monitored

CDP neighbor cache entries
CDP protocol counters
duplex mismatch detection via CDP
voice VLAN ID advertised
CDP source interface configuration

Imported Objects

From CISCO-CDP-MIB

cdpCacheDeviceIndex	OBJECT-TYPE
cdpCacheEntry	OBJECT-TYPE
cdpCacheIfIndex	OBJECT-TYPE

From CISCO-TC

CiscoNetworkAddress
CiscoNetworkProtocol

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From Q-BRIDGE-MIB

PortList
VlanId

From RADLAN-DEVICEPARAMS-MIB

rndErrorDesc	OBJECT-TYPE
rndErrorSeverity	OBJECT-TYPE

From RADLAN-MIB

rnd	OBJECT-IDENTITY
rndNotifications	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF rlCdpLogMismatchDuplexTrap	1.3.6.1.4.1.89.0.224			Warning trap indicating that duplex mismatch has been detected by CDP
NTF rlCdpLogMismatchVoiceVlanTrap	1.3.6.1.4.1.89.0.225			Warning trap indicating that voice vlan mismatch has been detected by CDP
NTF rlCdpLogMismatchNativeVlanTrap	1.3.6.1.4.1.89.0.226			Warning trap indicating that native vlan mismatch has been detected by CDP
rlCdp	1.3.6.1.4.1.89.137			The private MIB module definition for CDP protocol.
RLC rlCdpVersionAdvertised	1.3.6.1.4.1.89.137.1	RlCdpVersionTypes	read-write	Specifies the verison of sent CDP packets
NUM rlCdpSourceInterface	1.3.6.1.4.1.89.137.2	InterfaceIndexOrZero	read-write	Specifices the CDP source-interface, which the IP address advertised into TLV is accoding to this source-interface instead of the outgoing interface. value of 0 indicates no source interface. value must belong to an ethernet port/lag
POR rlCdpLogMismatchDuplexEnable	1.3.6.1.4.1.89.137.3	PortList	read-write	Enable logging messages when detecting mishmatch between advertised and received duplex mode. To enable loging on specific interface set the corresponing bit.
rlCdpCountersTable	1.3.6.1.4.1.89.137.4		not-accessible	This table contains all cdp counter values, indexed by conter name
rlCdpCountersEntry	1.3.6.1.4.1.89.137.4.1		not-accessible	The row definition for this table.
NUM rlCdpCountersName	1.3.6.1.4.1.89.137.4.1.1	RlCdpCounterTypes	not-accessible	counter name used as key for counters table
C32 rlCdpCountersValue	1.3.6.1.4.1.89.137.4.1.2	Counter32	read-only	the value of the counter name specisifed by rlCdpCountersName, unsuppo will have no entry in the tab.
T/F rlCdpCountersClear	1.3.6.1.4.1.89.137.5	TruthValue	read-write	By setting the MIB to True, all error and traffic counters are set to zero.
T/F rlCdpCacheClear	1.3.6.1.4.1.89.137.6	TruthValue	read-write	By setting the MIB to True, all entries from the cdp cache table is deleted.
INT rlCdpVoiceVlanId	1.3.6.1.4.1.89.137.7	INTEGER	read-write	voice vlan Id, used as the Appliance Vlan-Id TLV
rlCdpCacheTable	1.3.6.1.4.1.89.137.8		not-accessible	The (conceptual) table contains externtion for the cdpCache table. indexed by cdpCacheEntry.
rlCdpCacheEntry	1.3.6.1.4.1.89.137.8.1		not-accessible	The row definition for this table.
STR rlCdpCacheVersionExt	1.3.6.1.4.1.89.137.8.1.1	DisplayString	read-only	This field contains the extention of the cdpCacheVersion field in the cdpCache table. In case the neighbour advertised the SW TLV as a string with length larger than 160, this field contains the chacters from place 160 and on. Zero-length strings indicates no Version field (TLV) was reported in the most recent CDP message, or it was smaller than 160 chars
INT rlCdpCacheTimeToLive	1.3.6.1.4.1.89.137.8.1.2	INTEGER	read-only	This field indicates the time remains in seconds till the entry should be expried.
RLC rlCdpCacheCdpVersion	1.3.6.1.4.1.89.137.8.1.3	RlCdpVersionTypes	read-only	This field indicates the cdp version that was reported in the most recent CDP message.
RLC rlCdpPduAction	1.3.6.1.4.1.89.137.9	RlCdpPduActionTypes	read-write	Defines CDP packets handling when CDP is globally disabled.
POR rlCdpLogMismatchVoiceVlanEnable	1.3.6.1.4.1.89.137.10	PortList	read-write	Enable logging messages when detecting mishmatch between advertised and received voice VLAN. To enable logging on specific interface set the corresponing bit.
POR rlCdpLogMismatchNativeVlanEnable	1.3.6.1.4.1.89.137.11	PortList	read-write	Enable logging messages when detecting mishmatch between advertised and received native VLAN. To enable loging on specific interface set the corresponing bit.
rlCdpSecondaryCacheTable	1.3.6.1.4.1.89.137.12		not-accessible	The (conceptual) table contains partial information from cdpCache table. indexed by rlCdpSecondaryCacheEntry.
rlCdpSecondaryCacheEntry	1.3.6.1.4.1.89.137.12.1		not-accessible	An entry (conceptual row) in the rlCdpSecondaryCacheTable, containing partial information received via CDP on one interface from one device. Entries appear when a CDP advertisement is received from a neighbor device. Entries disappear when CDP is disabled on the interface, globally or when the secondary cache is cleared
MAC rlCdpSecondaryCacheMacAddress	1.3.6.1.4.1.89.137.12.1.3	MacAddress	read-only	The MAC address of the neighbor.
STR rlCdpSecondaryCachePlatform	1.3.6.1.4.1.89.137.12.1.4	DisplayString	read-only	The Device's Hardware Platform prefix, as reported in the most recent CDP message. The zero-length string indicates that no Platform field (TLV) was reported in the most recent CDP message.
OCT rlCdpSecondaryCacheCapabilities	1.3.6.1.4.1.89.137.12.1.5	OCTET STRING	read-only	The Device's Functional Capabilities as reported in the most recent CDP message.
U32 rlCdpSecondaryCacheVoiceVlanID	1.3.6.1.4.1.89.137.12.1.6	Unsigned32	read-only	The remote device's VoIP VLAN ID, as reported in the most recent CDP message. This object is not instantiated if no Appliance VLAN-ID field (TLV) was reported in the most recently received CDP message.
INT rlCdpSecondaryCacheTimeToLive	1.3.6.1.4.1.89.137.12.1.7	INTEGER	read-only	This field indicates the number of seconds till the entry is expried.
U32 rlCdpSecondaryCachePowerAvailable	1.3.6.1.4.1.89.137.12.1.8	Unsigned32	read-only	The remote device's available power, as reported in the most recent CDP message. A value of 0xFFFFFFFF indicates that no Power Available TLV was reported in the most recently received CDP message.
U32 rlCdpSecondaryCachePowerConsumption	1.3.6.1.4.1.89.137.12.1.9	Unsigned32	read-only	The remote device's consumed power, as reported in the most recent CDP message. A value of 0xFFFFFFFF indicates that no Power Consumption TLV was reported in the most recently received CDP message.
BIT rlCdpSecondaryCacheSparePairPoECapabilities	1.3.6.1.4.1.89.137.12.1.10	Bits	read-only	The remote device's Spare-Pair (4-wire) Power-Over-Ethernet negotiation capabilities. The bit 'supported(0)' indicates that the device supports Spare Pair POE. The bit 'detectionClassificationRequired(1)' indicates that the device requires detection/classification on the spare-pair. The bit 'desiredState(2)' indicates whether the PD device desires power on the spare pair. The bit 'operationalState(3)' indicates whether the PSE device supplies power on the spare pair.
STR rlCdpSecondaryCacheDeviceId	1.3.6.1.4.1.89.137.12.1.11	DisplayString	read-only	The remote device's Device-ID prefix, as reported in the most recent CDP message. The zero-length string indicates that no Device-ID TLV was reported in the most recent CDP message.
STR rlCdpSecondaryCachePortId	1.3.6.1.4.1.89.137.12.1.12	DisplayString	read-only	The remote device's Port-ID prefix, as reported in the most recent CDP message. The zero-length string indicates that no Port-ID TLV was reported in the most recent CDP message.
T/F rlCdpGlobalLogMismatchDuplexEnable	1.3.6.1.4.1.89.137.13	TruthValue	read-write	Globally enable/disable logging messages when detecting mishmatch between advertised and received duplex mode.
T/F rlCdpGlobalLogMismatchVoiceVlanEnable	1.3.6.1.4.1.89.137.14	TruthValue	read-write	Globally enable/disable logging messages when detecting mishmatch between advertised and received voice VLAN.
T/F rlCdpGlobalLogMismatchNativeVlanEnable	1.3.6.1.4.1.89.137.15	TruthValue	read-write	Globally enable/disable logging messages when detecting mishmatch between advertised and received native VLAN.
rlCdpTlvTable	1.3.6.1.4.1.89.137.16		not-accessible	The (conceptual) table contains the local advertised information. indexed by rlCdpTlvEntry.
rlCdpTlvEntry	1.3.6.1.4.1.89.137.16.1		not-accessible	An entry (conceptual row) in the rlCdpTlvTable, containing local information advertised by CDP on one interface. Entries are available only when CDP is globally enabled, for interfaces on which CDP is enabled and the interface state is UP.
U32 rlCdpTlvIfIndex	1.3.6.1.4.1.89.137.16.1.1	Unsigned32	not-accessible	The ifIndex value of the local interface. A value of zero is used to access TLVs which do not changed between interfaces.
INT rlCdpTlvDeviceIdFormat	1.3.6.1.4.1.89.137.16.1.2	INTEGER	read-only	An indication of the format of Device-Id contained in the corresponding instance of rlCdpTlvDeviceId. serialNumber(1) indicates that the value of rlCdpTlvDeviceId object is in the form of an ASCII string contain the device serial number. macAddress(2) indicates that the value of rlCdpTlvDeviceId object is in the form of Layer 2 MAC address. other(3) indicates that the value of rlCdpTlvDeviceId object is in the form of a platform specific ASCII string contain info that identifies the device. For example: ASCII string contains serialNumber appended/prepened with system name.
STR rlCdpTlvDeviceId	1.3.6.1.4.1.89.137.16.1.3	DisplayString	read-only	The Device-ID string as will be advertised in subsequent CDP messages.
IPt rlCdpTlvAddress1Type	1.3.6.1.4.1.89.137.16.1.4	InetAddressType	read-only	The Inet address type of rlCdpTlvAddress1
IP rlCdpTlvAddress1	1.3.6.1.4.1.89.137.16.1.5	InetAddress	read-only	The (first) network-layer address of the device as will be advertised in the Address TLV of subsequent CDP messages. For example, if the corresponding instance of rlCdpTlvAddress1Type had the value 'ipv4(1)', then this object would be an IPv4-address.
IPt rlCdpTlvAddress2Type	1.3.6.1.4.1.89.137.16.1.6	InetAddressType	read-only	The Inet address type of rlCdpTlvAddress2
IP rlCdpTlvAddress2	1.3.6.1.4.1.89.137.16.1.7	InetAddress	read-only	The (first) network-layer address of the device as will be advertised in the Address TLV of subsequent CDP messages. For example, if the corresponding instance of rlCdpTlvAddress2Type had the value 'ipv6(2)', then this object would be an IPv6-address.
IPt rlCdpTlvAddress3Type	1.3.6.1.4.1.89.137.16.1.8	InetAddressType	read-only	The Inet address type of rlCdpTlvAddress3
IP rlCdpTlvAddress3	1.3.6.1.4.1.89.137.16.1.9	InetAddress	read-only	The (first) network-layer address of the device as will be advertised in the Address TLV of subsequent CDP messages. For example, if the corresponding instance of rlCdpTlvAddress3Type had the value 'ipv6(2)', then this object would be an IPv6-address.
STR rlCdpTlvPortId	1.3.6.1.4.1.89.137.16.1.10	DisplayString	read-only	The Port-ID string as will be advertised in subsequent CDP messages from this interface. This will typically be the value of the ifName object (e.g., 'Ethernet0').
OCT rlCdpTlvCapabilities	1.3.6.1.4.1.89.137.16.1.11	OCTET STRING	read-only	The Device's Functional Capabilities as will be advertised in subsequent CDP messages. For latest set of specific values, see the latest version of the CDP specification.
STR rlCdpTlvVersion	1.3.6.1.4.1.89.137.16.1.12	DisplayString	read-only	The Version string as will be advertised in subsequent CDP messages.
STR rlCdpTlvPlatform	1.3.6.1.4.1.89.137.16.1.13	DisplayString	read-only	The Device's Hardware Platform as will be advertised in subsequent CDP messages.
U32 rlCdpTlvNativeVLAN	1.3.6.1.4.1.89.137.16.1.14	Unsigned32	read-only	The local device's interface's native VLAN, as will be advertised in subsequent CDP messages.
INT rlCdpTlvDuplex	1.3.6.1.4.1.89.137.16.1.15	INTEGER	read-only	The local device's interface's duplex mode, as will be advertised in subsequent CDP messages.
U32 rlCdpTlvApplianceID	1.3.6.1.4.1.89.137.16.1.16	Unsigned32	read-only	The local device's Appliance ID, as will be advertised in subsequent CDP messages. A value of zero denotes no Appliance VLAN-ID TLV will be advertised in subsequent CDP messages.
U32 rlCdpTlvApplianceVlanID	1.3.6.1.4.1.89.137.16.1.17	Unsigned32	read-only	The local device's VoIP VLAN ID, as will be advertised in subsequent CDP messages. A value of zero denotes no Appliance VLAN-ID TLV will be advertised in subsequent CDP messages.
INT rlCdpTlvExtendedTrust	1.3.6.1.4.1.89.137.16.1.18	INTEGER	read-only	The local device's interface's extended trust mode, as will be advertised in subsequent CDP messages. A value of zero indicates the absence of extended trust.
U32 rlCdpTlvCosForUntrustedPorts	1.3.6.1.4.1.89.137.16.1.19	Unsigned32	read-only	The COS value with which all packets received on an untrusted port should be marked by a simple switching device which cannot itself classify individual packets. This TLV only has any meaning if corresponding instance of rlCdpTlvExtendedTrust indicates the absence of extended trust.
U32 rlCdpTlvPowerAvailableRequestId	1.3.6.1.4.1.89.137.16.1.20	Unsigned32	read-only	The Power Available TLV Request-ID field echoes the Request-ID field last received in a Power Requested TLV. It is 0 if no Power Requested TLV has been received since the interface last transitioned to ifOperState == Up.
U32 rlCdpTlvPowerAvailablePowerManagementId	1.3.6.1.4.1.89.137.16.1.21	Unsigned32	read-only	The Power Available TLV Power-Management-ID field.
U32 rlCdpTlvPowerAvailable	1.3.6.1.4.1.89.137.16.1.22	Unsigned32	read-only	The Power Available TLV Available-Power field indicates the number of milliwatts of power available to powered devices at the time this object is instatiated. A value of 0xFFFFFFFF indicates that the Power Available TLV is not advertised.
U32 rlCdpTlvPowerAvailableManagementPowerLevel	1.3.6.1.4.1.89.137.16.1.23	Unsigned32	read-only	The Power Available TLV Management-Power-Level field indicates the number of milliwatts representing the supplier's request to the powered device for its Power Consumption TLV. A value of 0xFFFFFFFF indicates the local device has no preference.
STR rlCdpTlvSysName	1.3.6.1.4.1.89.137.16.1.24	DisplayString	read-only	The sysName MIB as will be advertised in subsequent CDP messages.
U32 rlCdpTlvPowerConsumption	1.3.6.1.4.1.89.137.16.1.25	Unsigned32	read-only	The value of Power Consumption TLV indicates the maximum amount of power, in milliwatts, expected to be obtained and consumed from the interface over which the CDP packet is sent. A value of 0xFFFFFFFF indicates the TLV is not advertised.
U32 rlCdpTlvPowerRequestedRequestId	1.3.6.1.4.1.89.137.16.1.26	Unsigned32	read-only	The Power Requested TLV Request-ID field. A value of zero indicates that the Power Requested TLV is not advertised.
U32 rlCdpTlvPowerRequestedPowerManagementId	1.3.6.1.4.1.89.137.16.1.27	Unsigned32	read-only	The Power Requested TLV Power-Management-ID field echoes the Management- Power-ID field in the last received Power Available TLV, or to 0, if no Power Available TLV has been received.
BIT rlCdpTlvSparePairPoECapabilities	1.3.6.1.4.1.89.137.16.1.28	Bits	read-only	The capabilities advertised in the Spare-Pair POE TLV. The bit 'supported(0)' indicates that the device supports Spare Pair POE. The bit 'detectionClassificationRequired(1)' indicates that the device requires detection/classification on the spare-pair. The bit 'desiredState(2)' indicates whether the PD device desires power on the spare pair. The bit 'operationalState(3)' indicates whether the PSE device supplies power on the spare pair.
T/F rlCdpAdvertiseApplianceTlv	1.3.6.1.4.1.89.137.17	TruthValue	read-write	By setting the MIB to True Appliance VLAN-ID TLV may be advertised. A value of False will prevent this TLV from being advertised.
T/F rlCdpValidateMandatoryTlvs	1.3.6.1.4.1.89.137.18	TruthValue	read-write	By setting the MIB to true all mandatory TLVs 0x0001-0x0006 will be validated. Incoming CDP frames without any of the TLVs will be dropped. A value of false indicates that only the Device ID TLV (0x0001) is mandatory. Frames containing Device ID TLV will be processed, regardless of whether other TLVs are present or not.
rlCdpInterfaceCountersTable	1.3.6.1.4.1.89.137.19		not-accessible	This table contains all CDP counter values, indexed by interface id.
rlCdpInterfaceCountersEntry	1.3.6.1.4.1.89.137.19.1		not-accessible	The row definition for this table.
NUM rlCdpInterfaceId	1.3.6.1.4.1.89.137.19.1.1	InterfaceIndex	not-accessible	Interface id, used as index for interface counters table.
C32 rlCdpInterfaceTotalInputPackets	1.3.6.1.4.1.89.137.19.1.2	Counter32	read-only	Num of received packets on rlCdpInterfaceId
C32 rlCdpInterfaceV1InputPackets	1.3.6.1.4.1.89.137.19.1.3	Counter32	read-only	Num of v1 received packets on rlCdpInterfaceId
C32 rlCdpInterfaceV2InputPackets	1.3.6.1.4.1.89.137.19.1.4	Counter32	read-only	Num of v2 received packets on rlCdpInterfaceId
C32 rlCdpInterfaceTotalOutputPackets	1.3.6.1.4.1.89.137.19.1.5	Counter32	read-only	Num of sent packets from rlCdpInterfaceId
C32 rlCdpInterfaceV1OutputPackets	1.3.6.1.4.1.89.137.19.1.6	Counter32	read-only	Num of v1 sent packets from rlCdpInterfaceId
C32 rlCdpInterfaceV2OutputPackets	1.3.6.1.4.1.89.137.19.1.7	Counter32	read-only	Num of v2 sent packets from rlCdpInterfaceId
C32 rlCdpInterfaceIllegalChksum	1.3.6.1.4.1.89.137.19.1.8	Counter32	read-only	Num of received packets with illegal CDP checksum.
C32 rlCdpInterfaceErrorPackets	1.3.6.1.4.1.89.137.19.1.9	Counter32	read-only	specifies the number of received CDP packets with other error (duplicated TLVs, illegal TLVs, etc.)
C32 rlCdpInterfaceMaxNeighborsExceededInMainCache	1.3.6.1.4.1.89.137.19.1.10	Counter32	read-only	specifies the number of times a CDP neighbor could not be stored in the main cache.
C32 rlCdpInterfaceMaxNeighborsExceededInSecondaryCache	1.3.6.1.4.1.89.137.19.1.11	Counter32	read-only	specifies the number of times a CDP neighbor could not be stored in the secondary cache.
NUM rlCdpInterfaceCountersClear	1.3.6.1.4.1.89.137.20	InterfaceIndexOrZero	read-write	By setting the scalar to a interface id , all error and traffic counters of this interface are set to zero. To clear the counters for ALL interfaces set the scalar to 0x0FFFFFFF
rlCdpTlvPowerRequestTable	1.3.6.1.4.1.89.137.21		not-accessible	The (conceptual) table contains the local advertised requested power levels in Power Requested TLV. indexed by rlCdpTlvPowerRequestEntry.
rlCdpTlvPowerRequestEntry	1.3.6.1.4.1.89.137.21.1		not-accessible	An entry (conceptual row) in the rlCdpTlvPowerRequestTable, containing locally requested power levels advertised by CDP on one interface. Entries are available only when CDP is globally enabled, for interfaces on which CDP is enabled and the interface state is UP.
U32 rlCdpTlvPowerRequestPowerLevelIndex	1.3.6.1.4.1.89.137.21.1.2	Unsigned32	not-accessible	An index to the list of Requested-Power-Level in Power Requested TLV.
U32 rlCdpTlvPowerRequestPowerLevel	1.3.6.1.4.1.89.137.21.1.3	Unsigned32	read-only	A possible value of the Power Consumption TLV, in milliwatts
rlCdpSecondaryCacheAddressTable	1.3.6.1.4.1.89.137.22		not-accessible	The (conceptual) table containing the list of network-layer addresses of a neighbor interface, as reported in the Address TLV of the most recently received CDP message and stored in the secondary cache.
rlCdpSecondaryCacheAddressEntry	1.3.6.1.4.1.89.137.22.1		not-accessible	An entry (conceptual row) in the rlCdpSecondaryCacheAddressTable, containing the list of network-layer addresses of a neighbor interface, as reported in the Address TLV of the most recently received CDP message and stored in the secondary cache. Entries are available only when CDP is globally enabled, for interfaces on which CDP is enabled and the interface state is UP.
INT rlCdpSecondaryCacheAddressIndex	1.3.6.1.4.1.89.137.22.1.3	INTEGER	not-accessible	The index of the address entry for a given cdpCacheIfIndex,cdpCacheDeviceIndex pair.
CIS rlCdpSecondaryCacheAddressType	1.3.6.1.4.1.89.137.22.1.4	CiscoNetworkProtocol	read-only	An indication of the type of address contained in the corresponding instance of rlCdpSecondaryCacheAddress
ADR rlCdpSecondaryCacheAddress	1.3.6.1.4.1.89.137.22.1.5	CiscoNetworkAddress	read-only	A network-layer address of the device as reported in the most recent CDP message's Address TLV. For example, if the the corresponding instance of rlCdpSecondaryCacheAddressType had the value 'ip(1)', then this object would be an IPv4-address.
rlCdpSecondaryCacheRequestedPowerTable	1.3.6.1.4.1.89.137.23		not-accessible	The (conceptual) table containing the list of requested power levels by a remote device, as reported in the Power Requested TLV of the most recently received CDP message and stored in the secondary cache.
rlCdpSecondaryCacheRequestedPowerEntry	1.3.6.1.4.1.89.137.23.1		not-accessible	An entry (conceptual row) in the rlCdpSecondaryCacheRequestedPowerTable, containing the list of requested power levels by a remote device, as reported in the Power Requested TLV of the most recently received CDP message and stored in the secondary cache. Entries are available only when CDP is globally enabled, for interfaces on which CDP is enabled and the interface state is UP.
INT rlCdpSecondaryCacheRequestedPowerIndex	1.3.6.1.4.1.89.137.23.1.3	INTEGER	not-accessible	The index of the requested power level entry for a given cdpCacheIfIndex,cdpCacheDeviceIndex pair.
U32 rlCdpSecondaryCacheRequestedPowerLevel	1.3.6.1.4.1.89.137.23.1.4	Unsigned32	read-only	A requested power level in the Power Requested TLV, in milliwatts.

RFC description

Cisco Discovery Protocol (CDP) monitoring for Marvell/Radlan network switches, including TLV processing and neighbor discovery.

Start monitoring Marvell/Radlan-based managed switch (Cisco Discovery Protocol) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RADLAN-CDP-MIB

What Is RADLAN-CDP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description