All MIBs › RAD-MIB › prtSupervisoryStopBits
prtSupervisoryStopBits
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtSupervisoryStopBits
OID (numeric): 1.3.6.1.4.1.164.6.2.15.2.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This attribute indicates the parity mode in an async frame.
What is prtSupervisoryStopBits?
This object specifies the number of stop bits used in asynchronous serial frames on a port, with valid values being 1, 1.5, or 2 stop bits per character. Stop bits mark the end of a character transmission and allow receiver synchronization recovery. An operator would configure this when setting up serial port parameters to match the requirements of connected devices.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.6.2.15.2.1.1.5 snmpwalk -v2c -c public <target> RAD-MIB::prtSupervisoryStopBits
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.6.2.15.2.1.1.5.1 snmpget -v2c -c public <target> RAD-MIB::prtSupervisoryStopBits.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.6.2.15.2.1.1.5.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.6 | radGen | DACS-MIB |
| 1.3.6.1.4.1.164.6.2 | agnt | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15 | systemPort | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15.2 | prtSupervisory | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15.2.1 | prtSpTable | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15.2.1.1 | prtSpEntry | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15.2.1.1.5 | prtSupervisoryStopBits | RAD-MIB |