All MIBs › RAD-MIB › prtMl4CGA
prtMl4CGA
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtMl4CGA
OID (numeric): 1.3.6.1.4.1.164.3.2.3.2.19.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object selects the method used to signal the CGA state to the other end, through the main link. 'none' - non-transparent mode. When one of the links (main) will be in Out Of Service state, both 'Data/Voice Oos' and 'Oos' will be transmitted to the other end. 'trans' - when one of the links (main) will be in Out Of Service state, 'Data/Voice Oos' will be transmitted to the other end. 'full' - fully-transparent mode. When one of the links (main) will be in Out Of Service state, neither 'Data/Voice Oos' nor 'Oos' will be transmitted to the other end.
What is prtMl4CGA?
Configures how the device signals carrier group alarm (CGA) state to the far end—either non-transparent, transparent, or full transparency modes. Different modes control what alarms are sent when a link fails. An operator sets this to control which fault conditions propagate to the remote device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.19.1.1.5 snmpwalk -v2c -c public <target> RAD-MIB::prtMl4CGA
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.19.1.1.5.1 snmpget -v2c -c public <target> RAD-MIB::prtMl4CGA.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.2.3.2.19.1.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> prtMl4CGA.1
Start monitoring RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAD-MIB::prtMl4CGA OID value, configure state conditions and alerts, and monitor any RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.2 | muxHub | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3 | prtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2 | cnfgPrtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.19 | prtMl4Cnfg | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.19.1 | prtMl4CnfgTable | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1 | prtMl4CnfgEntry | DACS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.5 | prtMl4CGA | RAD-MIB |