All MIBs › RAD-MIB › prtInVc3Oos
prtInVc3Oos
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtInVc3Oos
OID (numeric): 1.3.6.1.4.1.164.3.2.3.2.14.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object is equal for all the ports in the specific card because of HW limitations
What is prtInVc3Oos?
This object controls the out-of-service state for incoming VC3 (Virtual Container 3) circuits on a port card, allowing states like forcedIdle, forcedBusy, busyIdle, or idleBusy. The setting applies equally to all ports on a card due to hardware constraints, meaning the entire card shares a single configuration. Operators use this to manage circuit availability and traffic patterns across all ports on the affected card.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.14.2.1.6 snmpwalk -v2c -c public <target> RAD-MIB::prtInVc3Oos
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.14.2.1.6.1 snmpget -v2c -c public <target> RAD-MIB::prtInVc3Oos.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.2.3.2.14.2.1.6.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.2 | muxHub | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3 | prtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2 | cnfgPrtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.14 | prtVc3Cnfg | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.14.2 | prtInVc3CnfgTable | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1 | prtInVc3CnfgEntry | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1.6 | prtInVc3Oos | RAD-MIB |