All MIBs › RAD-MIB › prtIn7p8VcPbxSignalMode
prtIn7p8VcPbxSignalMode
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtIn7p8VcPbxSignalMode
OID (numeric): 1.3.6.1.4.1.164.3.2.3.2.15.3.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object indicates the Signal Mode. For Server mode (prtIn7p8VcPbxMode=server), the only valid values are: - none - aBit
What is prtIn7p8VcPbxSignalMode?
This object specifies the signal mode configuration for a RAD network device's voice processing interface when operating in server mode. The signal mode determines how signaling information is transmitted or controlled on the interface (with valid values including 'none' or 'aBit'). An operator would check or modify this setting when configuring voice circuit behavior for PBX integration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.15.3.1.7 snmpwalk -v2c -c public <target> RAD-MIB::prtIn7p8VcPbxSignalMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.15.3.1.7.1 snmpget -v2c -c public <target> RAD-MIB::prtIn7p8VcPbxSignalMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.2.3.2.15.3.1.7.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.2 | muxHub | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3 | prtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2 | cnfgPrtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.15 | prtVcPbxCnfg | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.15.3 | prtIn7p8VcPbxCnfgTable | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1 | prtIn7p8VcPbxCnfgEntry | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.7 | prtIn7p8VcPbxSignalMode | RAD-MIB |