RAD-MIB :: prtHSPrtIdx

MIB Reference — IPNetwork Monitor

All MIBsRAD-MIBprtHSPrtIdx

prtHSPrtIdx

Module: RAD-MIB

OID (symbolic): RAD-MIB::prtHSPrtIdx

OID (numeric): 1.3.6.1.4.1.164.3.3.3.3.1.1.2

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description:

This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP. * The inside ports will be the HS cards ports. The convention used will be (for DXC): - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 .

What is prtHSPrtIdx?

This read-only integer uniquely identifies a physical port on a RAD telecom device based on its slot and card location. The numbering scheme encodes IO slot and port position so administrators can map logical OIDs to physical connectors. When troubleshooting a line card, a technician would use this to identify which physical port corresponds to the problematic SNMP object.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.3.3.3.1.1.2
snmpwalk -v2c -c public <target> RAD-MIB::prtHSPrtIdx

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.3.3.3.1.1.2.1
snmpget -v2c -c public <target> RAD-MIB::prtHSPrtIdx.1

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.164radDACS-MIB
1.3.6.1.4.1.164.3radWanDACS-MIB
1.3.6.1.4.1.164.3.3dacsMuxDACS-MIB
1.3.6.1.4.1.164.3.3.3prtDacsMuxDACS-MIB
1.3.6.1.4.1.164.3.3.3.3prtHSDACS-MIB
1.3.6.1.4.1.164.3.3.3.3.1prtHSParamTableDACS-MIB
1.3.6.1.4.1.164.3.3.3.3.1.1prtHSParamEntryDACS-MIB
1.3.6.1.4.1.164.3.3.3.3.1.1.2prtHSPrtIdxRAD-MIB