RAD-MIB :: prtGenTestMask

MIB Reference — IPNetwork Monitor

All MIBsRAD-MIBprtGenTestMask

prtGenTestMask

Module: RAD-MIB

OID (symbolic): RAD-MIB::prtGenTestMask

OID (numeric): 1.3.6.1.4.1.164.3.3.3.1.1.1.8

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description:

This is a mask which indicates which tests from the
'prtGenTestCmd' list are allowed for the selected port.
If a specific test is allowed, its respective bit will be SET 
in the mask :

  TEST                  BIT
 -----------            ---
 localLoop               1
 remoteLoop              2
 bert                    3
 plb                     4
 inband                  5

 prbs                    8
 loop2-v54  (RLB)        9
 loop3-v54  (LLB)       10

 Tone injection         13
 Tx-plb                 14
 Tx-llb                 15
 DTE loop (HSSI)        16

 HDSL-Tx-Inband         20
 HDSL-Rx-Inband         21
         Monitor                22  (test port)
         User Line Loopback         23

 Rem-Loop-on-Rem-Unit   25
         LBBD                   26
         LB1                    27
         LB2                    28
 BERT-on-Rem-Unit       29
         TS Remote Loop         30
         LLB-on-Rem-Unit        31

 e.g : If the return value is 3 -> 0000000000000011  ->
       Bits 1 & 2 are set -> the allowed tests are :
                                    local-loop
                                    remote-loop  

What is prtGenTestMask?

This OID holds a numeric value used for hardware diagnostics on the RAD device, though its specific purpose in this MIB is not documented. The read-only access means you can check its value but cannot change it. A technician may reference this during equipment troubleshooting if directed by RAD technical support.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.3.3.1.1.1.8
snmpwalk -v2c -c public <target> RAD-MIB::prtGenTestMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.3.3.1.1.1.8.1
snmpget -v2c -c public <target> RAD-MIB::prtGenTestMask.1

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.164radDACS-MIB
1.3.6.1.4.1.164.3radWanDACS-MIB
1.3.6.1.4.1.164.3.3dacsMuxDACS-MIB
1.3.6.1.4.1.164.3.3.3prtDacsMuxDACS-MIB
1.3.6.1.4.1.164.3.3.3.1prtGenDACS-MIB
1.3.6.1.4.1.164.3.3.3.1.1prtGenParamTableDACS-MIB
1.3.6.1.4.1.164.3.3.3.1.1.1prtGenEntryDACS-MIB
1.3.6.1.4.1.164.3.3.3.1.1.1.8prtGenTestMaskRAD-MIB