All MIBs › RAD-MIB › prtExVc2CallEnable
prtExVc2CallEnable
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtExVc2CallEnable
OID (numeric): 1.3.6.1.4.1.164.3.2.3.2.5.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object indicates the Enabled Call direction. notApplicable - for all cards except VC-2/R2. both - incoming + outgoing.
What is prtExVc2CallEnable?
This OID stores a setting that controls whether phone calls can come in, go out, or do both on a VC-2/R2 interface card. It tells you the direction of call traffic the card is permitted to handle. An operator would adjust this when setting up a new phone line to specify if it should accept incoming calls only, make outgoing calls only, or handle both directions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.5.1.14 snmpwalk -v2c -c public <target> RAD-MIB::prtExVc2CallEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.5.1.14.1 snmpget -v2c -c public <target> RAD-MIB::prtExVc2CallEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.2.3.2.5.1.14.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.2 | muxHub | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3 | prtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2 | cnfgPrtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.5 | prtVc2CnfgTable | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.5.1 | prtVc2CnfgEntry | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.14 | prtExVc2CallEnable | RAD-MIB |