RAD-MIB :: prtExPVc4SignalingProtocol

MIB Reference — IPNetwork Monitor

All MIBsRAD-MIBprtExPVc4SignalingProtocol

prtExPVc4SignalingProtocol

Module: RAD-MIB

OID (symbolic): RAD-MIB::prtExPVc4SignalingProtocol

OID (numeric): 1.3.6.1.4.1.164.3.2.3.2.9.1.1.24

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description:

The signaling protocol that will be used between the PABX & the voice port.

Delay Start Protocol: the line is seized by sending an Off hook signal and after a delay, if the called party is available (On hook) DTMF (Dual Tone Multi Frequency) digits are sent towards the called party.

Immediate Start Protocol: the line is seized by sending an Off Hook signal and immediately DTMF digits are sent towards the called party.

Wink start protocol: the line is seized by sending an Off Hook signal and then the called party sends a short Off Hook wink signal. Now the calling party starts sending DTMF digits.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.9.1.1.24
snmpwalk -v2c -c public <target> RAD-MIB::prtExPVc4SignalingProtocol

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.9.1.1.24.1
snmpget -v2c -c public <target> RAD-MIB::prtExPVc4SignalingProtocol.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.2.3.2.9.1.1.24.1 i <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.164radDACS-MIB
1.3.6.1.4.1.164.3radWanDACS-MIB
1.3.6.1.4.1.164.3.2muxHubDACS-MIB
1.3.6.1.4.1.164.3.2.3prtMuxDACS-MIB
1.3.6.1.4.1.164.3.2.3.2cnfgPrtMuxDACS-MIB
1.3.6.1.4.1.164.3.2.3.2.9prtPVc4CnfgDACS-MIB
1.3.6.1.4.1.164.3.2.3.2.9.1prtExPVc4CnfgTableDACS-MIB
1.3.6.1.4.1.164.3.2.3.2.9.1.1prtExPVc4CnfgEntryDACS-MIB
1.3.6.1.4.1.164.3.2.3.2.9.1.1.24prtExPVc4SignalingProtocolRAD-MIB