All MIBs › RAD-MIB › prtExPVc4SeizeAck
prtExPVc4SeizeAck
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtExPVc4SeizeAck
OID (numeric): 1.3.6.1.4.1.164.3.2.3.2.9.1.1.23
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This parameter shows whether the device will acknowledge a seize signal (On/Off Hook). When the value is set to yes(3) & the device receives an on/off hook signal it will transmit back an on/off hook signal. When the value is set to no(2) & the device receives an on/off hook signal it will NOT transmit back an on/off hook signal.
Example: If Seize Ack Parameter = YES, when the MVC.4 receives a seize signal (Off Hook) from the PBX it will send an Off Hook to the PBX.
The Seize Parameter is relevant for all the following cards: MVC-4 MVC-4/E1-Framer MVC-4/T1-DSU-Framer MVC-4/T1-CSU-Framer MVC-4/E1-SLAVE MVC-4/T1-SLAVE
Default values: Analog FXS - No (value can't be changed). Analog FXO - Yes (value can't be changed). Analog E&M - No (values NO/YES). Digital E1/T1 Framer & Slave - No.
What is prtExPVc4SeizeAck?
This object controls whether the MVC.4 voice card will acknowledge an on-hook or off-hook signal received from a PBX by transmitting a matching signal back. When set to 'yes', the device echoes the seize signal; when set to 'no', it ignores the signal without responding. An operator configures this based on the PBX integration requirements and signal protocol expectations.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.9.1.1.23 snmpwalk -v2c -c public <target> RAD-MIB::prtExPVc4SeizeAck
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.9.1.1.23.1 snmpget -v2c -c public <target> RAD-MIB::prtExPVc4SeizeAck.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.2.3.2.9.1.1.23.1 i <value>
Start monitoring RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAD-MIB::prtExPVc4SeizeAck OID value, configure state conditions and alerts, and monitor any RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.2 | muxHub | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3 | prtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2 | cnfgPrtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.9 | prtPVc4Cnfg | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.9.1 | prtExPVc4CnfgTable | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1 | prtExPVc4CnfgEntry | DACS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.23 | prtExPVc4SeizeAck | RAD-MIB |