RAD-MIB :: agnListDecodingAcmRelaySlt

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsRAD-MIBagnListDecodingAcmRelaySlt

agnListDecodingAcmRelaySlt

Module: RAD-MIB

OID (symbolic): RAD-MIB::agnListDecodingAcmRelaySlt

OID (numeric): 1.3.6.1.4.1.164.3.1.2.7.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object indicates the ACM slot, desired for outbound relay (report) for the selected alarm. In the ?004 Unit the entries io6(10)..io12(16) are not valid. none - when agnListDecodingType=alr AND the selected alarm should not be reported by an ACM card. notApplicable - when agnListDecodingType=sanity OR when [agnListDecodingType=alr and there is no ACM card installed in the Mux].

What is agnListDecodingAcmRelaySlt?

This read-write object specifies which ACM (Alarm Control Module) slot should receive and relay alarm reports for a selected alarm entry in a RAD device, with 'none' indicating no relay and 'notApplicable' when relaying is not available. Operators use this to configure redundancy and alarm distribution across multiple ACM cards in the system. The slot choices (io1 through io12 in some hardware) depend on which ACM cards are installed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.1.2.7.1.1.6
snmpwalk -v2c -c public <target> RAD-MIB::agnListDecodingAcmRelaySlt

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.1.2.7.1.1.6.1
snmpget -v2c -c public <target> RAD-MIB::agnListDecodingAcmRelaySlt.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.1.2.7.1.1.6.1 i <value>

Start monitoring RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAD-MIB::agnListDecodingAcmRelaySlt OID value, configure state conditions and alerts, and monitor any RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.164radDACS-MIB
1.3.6.1.4.1.164.3radWanDACS-MIB
1.3.6.1.4.1.164.3.1wanGenDACS-MIB
1.3.6.1.4.1.164.3.1.2agnWanGenDACS-MIB
1.3.6.1.4.1.164.3.1.2.7agnListDecodingDACS-MIB
1.3.6.1.4.1.164.3.1.2.7.1agnListDecodingTableDACS-MIB
1.3.6.1.4.1.164.3.1.2.7.1.1agnListDecodingEntryDACS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.164.3.1.2.7.1.1.6agnListDecodingAcmRelaySltRAD-MIB