RAD-MIB :: agnCSaveFlipDbCmd

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsRAD-MIBagnCSaveFlipDbCmd

agnCSaveFlipDbCmd

Module: RAD-MIB

OID (symbolic): RAD-MIB::agnCSaveFlipDbCmd

OID (numeric): 1.3.6.1.4.1.164.3.1.2.5.4.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Setting this attribute to on(3) will initiate the process of Sanity check on the Temp Flip Db and if it is OK, it will save the Flip Db in the NVRAM, activating the new Flip DB . If check detects errors, the save will not be performed. Afterwards, the object's value will change automatically to off(2).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.1.2.5.4.2
snmpwalk -v2c -c public <target> RAD-MIB::agnCSaveFlipDbCmd

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.1.2.5.4.2.1
snmpget -v2c -c public <target> RAD-MIB::agnCSaveFlipDbCmd.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.1.2.5.4.2.1 i <value>

Start monitoring RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAD-MIB::agnCSaveFlipDbCmd OID value, configure state conditions and alerts, and monitor any RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.164radDACS-MIB
1.3.6.1.4.1.164.3radWanDACS-MIB
1.3.6.1.4.1.164.3.1wanGenDACS-MIB
1.3.6.1.4.1.164.3.1.2agnWanGenDACS-MIB
1.3.6.1.4.1.164.3.1.2.5agnFlipDbDACS-MIB
1.3.6.1.4.1.164.3.1.2.5.4agnFlipDbControlsDACS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.164.3.1.2.5.4.2agnCSaveFlipDbCmdRAD-MIB